ºE¿╠╠$ä∩{╫ íâ!╜"&!)&,┐.N0¥2E4▓6{8█,                         Name Of This System,                         ───────────────────G The name entered here is displayed at the program's termination in theG "Registered To:" message (registered copies only).  The name indicatedG in  this parameter MUST be the exactly the same as the name used  whenG registering QReader and must be entered exactly the same into  all  of( the QReader configuration (.CNF) files.█0                     QReader Registration Number0                     ───────────────────────────8 This is the number received when QReader is registered.      F Registration will replace the "Unregistered Copy" message (which will= appear at program termination) with the name of your system.F Registration  will entirely remove the  "Unregistered  Copy"  message/ which appears after each HELLO screen appears.F Registration will remove the brief delays that are  encountered  with( the above "Unregistered Copy" messages.F You  may receive a registration number INSTANTLY by ordering  with  aB major credit card!  See the ORDER.FRM in QREAD20.ZIP for details.█3                  Location AND Name of WELCOME File3                  ─────────────────────────────────F  This is the file displayed to the caller when first entering QReader@  or after  selecting this area from another area with (S)elect.  F  Please refer to the QReader manual for instructions on how color  isF  utilized  by this file.  If using the Ascii\ANSI  "two file"  methodF  for text files, do not place the "G" at the end of the filename hereE  as QReader will do this automatically if the caller is using color.F  It is  recommended this file contain some  introductory  informationF  about the text  contained in this configuration of QReader.  You mayF  specify unique WELCOME files for different QReader configurations by3  specifying different file names and\or locations.F  This file is optional. Leave this parameter blank if it is not used.█1                   Location AND Name of MENU File1                   ──────────────────────────────F  This is the QReader main menu. All of the available QReader commands+  should be briefly displayed on this file.F  Please refer to the QReader manual for instructions on how color  isF  utilized  by this file.  If using the Ascii\ANSI  "two file"  methodF  for text files, do not place the "G" at the end of the filename hereE  as QReader will do this automatically if the caller is using color.F  If the (G)oodbye key is not used in your configuration, it should be  removed from all MENU files.F  You may  use unique MENU files for different QReader  configurationsF  by specifying different file names and\or locations in each  QReader7  configuration, however this is not usually necessary.█2                    Location AND Name of HELP File2                    ──────────────────────────────F  The  HELP  files are shown when caller presses "H" in QReader.  HELPF  files  should contain more detailed information about  each  QReader.  that is displayed on the QReader MENU files.F  Please refer to the QReader manual for instructions on how color  isF  utilized  by this file.  If using the Ascii\ANSI  "two file"  methodF  for text files, do not place the "G" at the end of the filename hereE  as QReader will do this automatically if the caller is using color.F  You may  use unique HELP files for different QReader  configurationsF  by specifying different file names and\or locations, however this is.  not usually necessary nor is it recommended.█0                     Level to (S)elect this Text0                     ───────────────────────────F  This  is the  security  level a  caller will need to  (S)elect  thisB  configuration of QReader from a different QReader configuration.F  For example, you offer 5 publications on-line.  You want all callersF  to be able to enter QReader,  but you only want callers at a certainF  level (or above)  to be able to access two of the five publications.F  Install  all five publications  into QReader's  SELECT mode. If thisF  configuration  (the one being edited now)  is one which only certain9  callers should access, enter their security level here.F  This  parameter is only valid  if this configuration of QReader  hasF  been installed as part of QReader's SELECT mode. Please refer to the;  QReader manual for information regarding the SELECT mode.█1                    Level to Use (S)elect Command1                    ─────────────────────────────F  This is the security level a caller will need to enter the  (S)elect(  command at the Main prompt in QReader.F  This parameter should not be confused with the "Level to Select this@  text" parameter (The parameter preceding this one in QRSETUP).█4                 Location AND Name of Text Menu File4                 ───────────────────────────────────F  This  is a menu displayed to the caller when (R)ead is  selected. ItF  shows  text selections which are available for  this  configuration.F  For  example,  if this configuration is an area  which  contains  18F  individual  text  files, the file indicated in this  parameter  will7  need to describe each of the 18 items for the caller.F  Please refer to the QReader manual for instructions on how color  isF  utilized  by this file.  If using the Ascii\ANSI  "two file"  methodF  for text files, do not place the "G" at the end of the filename hereE  as QReader will do this automatically if the caller is using color.F  You MUST  specify unique files  in this parameter for other  QReaderE  configurations by specifying different file names and\or locations.█4                 Location AND Name of Text Data File4                 ───────────────────────────────────F  This is the data file which contains each individual text file which'  makes  up this QReader configuration.C  Text file name           Description of contents            NotesC  --------------           -----------------------            -----"  NEWS1.TXT                Weather  NEWS2.TXT                News!  NEWS3.TXT                Sports   NEWS4.TXT                Misc.F  In the "Text Menu File" parameter you should indicate that selectingF  #1 would show the caller the contents of NEWS1.TXT, #2 would display  NEWS2.TXT, etc.█2                  Location AND Name of QReader Log2                  ────────────────────────────────F  If desired,  QReader will keep a separate log file of the selections5  callers are reading, downloads, carrier drops, etc.  F  Enter a location and filename in this parameter if this is  desired,+  otherwise leave this blank or enter NONE.█-                       Location of Text Files-                       ──────────────────────F  Enter  the location where the  text files  for reading  are located.F  This will be the location where the files listed  in the data (.DAT)>  file are located.  Enter the location ONLY, not a file name!█)                           QReader Prompt)                           ──────────────F  You  may customize  the QReader main menu prompt.  Any valid QReaderF  text @macro@ macros may be used.  Color macros cannot be used in the  prompt at this time.█(                             Description(                             ───────────F  The  `Desc:' parameter is the `TOP' information line  of the QReaderF  `Full-Screen' reader.  This stays at the top of the screen while theF  `Full-Screen' reader is active. This line should provide information<  about the text contained in this configuration of QReader.F  If this configuration of QReader is a news based item updated daily,F  weekly, or monthly, this is an ideal place for the @FILEDATE@ macro.F  QReader automatically detects the LATEST file date of the text filesF  installed for reading,  and anywhere the @FILEDATE@ macro is used it  is replaced with this date.█,                          Reader Status Line,                          ──────────────────F  You may customize the status line  in the `Full-Screen' reader. ThisF  is the next to the last line on the screen and stays there while theF  'Full-Screen' reader is active.  While you may change this parameterF  to your liking,  it is recommended that  it contain help informationF  for the 'Full-Screen' reader Pop-Up help window. Valid help keys are!  (H)elp, F1 (doorway mode) or ?.█0                      Location of Download Files0                      ──────────────────────────F  If downloads are allowed in this configuration of QReader, the filesF  available for downloading must be located in the location  specifiedF  in this parameter. Do NOT enter a file NAME here, just the location.█+                          Mask for Auto-Dir+                          ─────────────────F  Auto-Dir is the process where QReader creates  a DIR `on the fly' toF  display to the caller. This is very handy if you wish to offer back-F  issues of text publications for download.  Simply place a `mask' forF  finding file names in the `Location of Download Files' parameter andF  QReader  will display `matches' in the familiar BBS DIR format.  ForF  example,  if you are carrying the weekly `Modem Times' on-line,  andF  the ZIPped issues are named MDMT0420.ZIP,  MDMT0427.ZIP, etc., placeF  MDMT*.ZIP  in this parameter.  If you only wish a single file  to be;  downloaded, enter the entire file name in this parameter.F  Also see the other `Auto-Dir' parameters for more Auto-Dir features.B  Enter NONE in this parameter if you do not wish to use Auto-Dir.█/                       Sort Method for Auto-Dir/                       ────────────────────────F  If using the `Auto-Dir' method for displaying downloadable  files toF  the caller you may specify the method in which they are sorted priorF  to being displayed.  If `Auto-Dir' is being used  to display  daily,F  weekly, or monthly publications, the sort method would usually be 1.0  This means the newest file is displayed first.  Valid Sort options are:F  1) Date descending, Newest file displays first, oldest will be last.F  2) Date ascending,  Oldest file displays first, newest will be last.  3) Alphabetically,  From A-Z.F  4) None - No sort,  Files are displayed in the order found on drive.F  Also see the other `Auto-Dir' parameters for more Auto-Dir features.█-                         Auto-Dir Description-                         ────────────────────F  Downloadable files which  are displayed using Auto-Dir should have aF  brief 30 character description which  is displayed with each  of the>  Auto-Dir files. The following is a typical Auto-Dir listing:F  MDMT0427.ZIP    84231  04-27-91 Issue of Modem Times (Time: 0.4 min)F  MDMT0420.ZIP    78617  04-20-91 Issue of Modem Times (Time: 0.3 min)F  MDMT0413.ZIP    82452  04-13-91 Issue of Modem Times (Time: 0.4 min)F  The `Issue of Modem Times' is the brief description you would  enterF  in  this parameter.  The download time (in parenthesis)  is added by/  QReader automatically after this description.B  Enter NONE in this parameter if you do not wish to use Auto-Dir.█0                   Location AND Name of DIR File0                   ─────────────────────────────  This parameter has two uses:F  1) It can be used as a `header file'  for Auto-Dir. It will be shownF     right before the Auto-Dir is displayed. It may contain additional:     information about the download files in the Auto-Dir.%                               - OR -F  2) If you do not wish to use `Auto-Dir', make this a regular BBS DIRF     file  with names and descriptions.  Be sure to enter NONE for all     other Auto-Dir parameters.F  Enter NONE if you do not wish to use this feature  or if downloading,  is disabled in this QReader configuration.█-                       Security to (D)ownload-                       ──────────────────────E  This is the security level a caller needs to (D)ownload in QReader.F  This is the security level a caller needs to (D)ownload in  QReader.F  If the caller's security level is equal to or higher then the  levelF  specified in this parameter, the caller will be able to use the  (D)  key and download.█,                        Free Download Status,                        ────────────────────F  You may select how (and if) callers are charged for downloads.  ThisF  setting  is only valid when QReader is being used in the PCBoard  or>  Wildcat mode.  It is ignored in the "generic DOOR.SYS" mode.<  (0) Regular download - Count, bytes, and time are charged.D  (1) Free download - Count, bytes are not charged, time is charged.>  (2) Free / No time - Count, bytes, and time are not charged.F  (3) No time download - Time is not charged (clock stops), count  and      bytes are charged.█.                     Disable (G)oodbye Command.                     ─────────────────────────F  If you do not wish callers to logoff from inside QReader, answer YesF  to disable the (G)oodbye command. If (G)oodbye is disabled it should*  be removed from all MENU and HELP files.F  This setting is ignored if QReader is running the "generic DOOR.SYS"E  mode, since the (G)oodbye function is never available in that mode.█/                     Swap QReader when Shelling/                     ──────────────────────────F  QReader has the ability to SWAP itself out of memory to EMS or  diskC  when shelling (DSZ\GSZ downloads, F5 or ALT-D Sysop drop to DOS).  Answer N to disable swapping.B  Answer D to force QReader to swap itself to Disk during a shell.F  Answer Y to allow QReader to test if EMS is present, and swap itselfF  to EMS if so. If EMS is not found, QReader will swap itself to disk.F  Never use swapping if QReader is running in a multi-tasking environ-B  ment other than those listed as supported in the QReader manual.█2                   Start with Full-Screen Mode Off2                   ───────────────────────────────F  Under certain circumstances, it may be desirable for QReader to  useF  the NON-Full-Screen mode for displaying files.  This  toggle  forcesF  QReader to behave as if the NON-Full-Screen reader was the  default,  instead of the opposite.F  This capability is not normally required, therefore  this  parameter'  should normally be answered N for no.█.                       BBS Software Being Used.                       ───────────────────────F  QReader may be used in three different types of environments. Select(  the number below which is appropriate."  (1)  PCBoard version 14.5x ONLY."  (2)  Wildcat version V3.0x ONLY.9  (3)  Other systems that create a generic DOOR.SYS file.█