[<<Previous Entry] [^^Up^^] [Next Entry>>] [Menu] [About The Guide]
INT 31 P - DPMI 0.9+ - SET SEGMENT BASE ADDRESS
        AX = 0007h
        BX = selector
        CX:DX = linear base address
Return: CF clear if successful
        CF set on error
            AX = error code (DPMI 1.0+) (8022h,8025h) (see AX=0000h)
Notes:  only modify descriptors allocated with INT 31/AX=0000h
        only the low 24 bits of the address will be used by 16-bit DPMI
          implementations even on a 386 or higher
        DPMI 1.0+ automatically reloads any segment registers containing the
          selector being modified
        not supported by MS Windows 3.0 in Standard mode
SeeAlso: AX=0008h,AX=0009h,AX=000Ch,INT 21/AX=3503h

See Also: 310006
This page created by ng2html v1.05, the Norton guide to HTML conversion utility. Written by Dave Pearson