Help Index

Help for error messages is available by message. When a message box appears, Click on the HELP command button. You will be presented with a possible cause for the situation and recommended corrective action.


Invalid FormFile Version.
Message #3 Invalid Form File Version.

Possible Causes:

-	The file specified was created using a later version of JetForm.

Corrective Action:

-	Forms cannot be opened if they were created using a more recent version of JetForm than one being used.


Cannot Open another Form File.
Message #4 Cannot Open another Form File.

Possible Causes:

-	JetForm has found too many errors and cannot open another form file.

Corrective Action:

-	Exit JetForm and restart.


Error Renaming File.
Message #10 Error Renaming File.

Possible Causes:

-	The file is protected and cannot be renamed.

-	A file already exists with the new name.

-	The file is a network file that is flagged read only.

Corrective Action:

-	Change file attributes.

-	Change network attributes.

-	Select a different name.


Error creating a Temporary File.
Message #11 Error creating a Temporary File.

Possible Causes:

-	Insufficient disk space available to create file.

-	Windows tempfile variable points to a disk with no space.

-	Windows tempfile variable points to a network drive where write privileges are denied.

Corrective Action:

-	Delete unnecessary files to create more disk space.

-	Change Windows tempfile variable in WIN.INI to point to new location (see Windows manual).


Out of global memory.
Message #15 Out of global memory.

Possible Causes:

-	Windows has run out of available global memory.

Corrective Action:

-	Close other windows to free up memory.


File Open Error.
Message #100 File Open Error.

Possible Causes:

-	File name or search path was incorrectly entered.

-	File is located in a directory other than the one specified.

-	File is a protected file or if you are on a network, it is a protected network file.

-	File does not exist.

Corrective Action:

-	Correct search path or file name.

-	Change file or network attributes to make it accessible.


Message #0102
Message #102 - The INI file is not compatible with this version of Design. Please verify your installation.

Possible Causes:

The 'Version' entry in the [JetForm] section of the JFDESIGN.INI file does not match the running version of JetForm Design. Perhaps the installation did not run to completion, or the .INI file is not in the Working Directory when you run JetForm Design, nor is it in the directory where the JetForm Design program is.

Corrective Action:

Ensure that the proper version of JFDESIGN.INI file is in the Working Directory.


Invalid Line Width
Message #911 Invalid Line Width

Possible Causes:

-	The entered line width is invalid.

Corrective Action:

-	Correct the line width.


Invalid Angle
Message #912 Invalid Angle

Possible Causes:

-	The entered arc angle is invalid.

Corrective Action:

-	Correct the arc angle.


Invalid Radius
Message #913 Invalid Radius

Possible Causes:

-	The entered corner radius is invalid.

Corrective Action:

-	Correct the corner radius.


Invalid X Grid Interval
Message #914 Invalid X Grid Interval

Possible Causes:

-	The entered X Grid Interval is invalid.

Corrective Action:

-	Correct the X Grid Interval.


Invalid typeface selected
Message #917 Invalid typeface selected

Possible Causes:

-	The entered typeface is not available within the current configuration.

Corrective Action:

-	Select a typeface that is supported by the current configuration.


Invalid font pointsize selected
Message #918 Invalid font point size selected

Possible Causes:

-	The entered point size is not supported by the current configuration

Corrective Action:

-	Change the point size.


Unable to build the list of fonts
Message #919 Unable to build the list of fonts

Possible Causes:

-	Unable to build printer font list.

Corrective Action:

-	Contact technical support.


Invalid font style selected
Message #920 Invalid font style selected

Possible Causes:

-	The selected font style is not supported within the current configuration.

Corrective Action:

-	Select a supported font style.

-	Reconfigure to include fonts with the desired font style.


Invalid line spacing
Message #921 Invalid line spacing value

Possible Causes:

-	The entered line spacing is invalid.

Corrective Action:

-	Correct the line spacing value.


Invalid text margin value
Message #922 Invalid X text margin value

Possible Causes:

-	The entered value for the X text margin is invalid.

Corrective Action:

-	Correct the value for the X text margin.


Invalid scale value
Message #924 Invalid logo scale

Possible Causes:

-	The entered scale factor is invalid.

Corrective Action:

-	Correct the entered value.


Invalid Y Grid Interval
Message #925 Invalid Y Grid Interval

Possible Causes:

-	The entered value for the Y Grid Interval is invalid.

Corrective Action:

-	Correct the entered value.


Invalid Y Text Margin Value
Message #926 Invalid Y Text Margin Value

Possible Causes:

-	The entered value for the Y Text Margin is invalid.

Corrective Action:

-	Correct the entered value.


Invalid number of Lines per Page
Message #927 Invalid number of Lines per Page

Possible Causes:

-	The entered value for Lines per Page is invalid.

Corrective Action:

-	Correct the entered value.


Invalid number of lines
Message #932 Invalid number of lines

Possible Causes:

-	Entered value for number of lines in the field is invalid.

Corrective Action:

-	Correct the entered value.


Invalid number of characters
Message #933 Invalid number of columns for a field

Possible Causes:

-	Entered an invalid number of characters for the data field.

Corrective Action:

-	Correct the entered value.


Invalid characters in field name
Message #934 Invalid characters in field name

Possible Causes:

-	The field name contains invalid characters, such as spaces.

Corrective Action:

-	Correct the field name; remove any embedded spaces.


Invalid paper tray option
Message #942 Invalid paper tray option

Possible Causes:

-	The selected paper tray is not valid for the current printer.

Corrective Action:

-	Select a valid paper tray number.


Unable to open schema file
Message #954 Unable to open schema file: filename

Possible Causes:

-	File name or search path was incorrectly entered.

-	File is located in a directory other than the one specified.

-	File does not exist.

Corrective Action:

-	Correct search path or file name.

-	Change file or network attributes to make it accessible.


Line in schema file is invalid
Message #955 Line number in schema file invalid.

Possible Causes:

-	JetForm has encountered an invalid record within the schema file.

Corrective Action:

-	Recreate the schema file. If problem persists, contact technical support.


No fields found in schema file.
Message #956 No fields found in schema file

Possible Causes:

-	The schema file does not include any field definitions.

Corrective Action:

-	Recreate the schema file.


Current configuration does not define barcodes
Message #957 Your current configuration does not define any Barcodes. OK to delete all Barcode entities from the form?

Possible Causes:

-	The current configuration does not include barcodes.

Corrective Action:

-	Reconfigure to include barcodes.


Page still contains entities, OK to delete?
Message #958 This page still contains data. OK to delete it?

Possible Causes:

-	The page to be deleted is not blank.

Corrective Action:

-	Verify that the correct page is going to be deleted.


Unknown field name referenced
Message #973 Field fieldname - Unknown field name referenced in expression

Possible Causes:

-	An unknown field was referenced in the calculation/validation rule for the field identified by fieldname.

Corrective Action:

-	Correct the field name within the expression.


Invalid template location
Message #974 Invalid location for template

Possible Causes:

-	Template has been positioned off the page area.

Corrective Action:

-	Access the Template Position/Scale dialog and correct the position values.


Invalid size for template
Message #975 Invalid size for template

Possible Causes:

-	Entered template width or height is invalid.

Corrective Action:

-	Access the Template Position/Scale dialog and correct the scale values.


Field must have a name
Message #976 A field must have a name in order to be used in a calculation.

Possible Causes:

-	The selected field is not named.

Corrective Action:

-	Name the field if it is to be used in a calculation/validation rule.


Message #995 - Field name name occurs more than 128 times. Cann
Message #995 - Field name name occurs more than 128 times. Cannot prompt using this document.

Possible Causes:

The same field name has been used for more than 128 fields on the same page of this form.

Corrective Action:

Redesign the form using a different field name for some of the fields.


This logo is too large to display at the selected Display Facto
Message #1006 This logo is too large to display at the selected Display Factor. Increase the Display Factor and re-try.

Possible Causes:

-	Logo bitmap created for display is greater that 64K.

Corrective Actions:

-	Increase Display Factor until JetForm is able the display the logo.


Copy protection Violation - you must install an authorized copy
Message #1008 Copy protection Violation - you must install an authorized copy of JetForm.

Possible Causes:

-	An unauthorized copy of JetForm was installed.

-	JetForm copy protection was not transferred properly onto the hard disk.

-	JetForm was not properly de-installed before it was re-installed.

Corrective Actions:

-	Obtain an authorized version of JetForm.

-	De-install properly and then attempt to re-install JetForm.


Message #1037 - Error creating Header window.

Possible Causes:

-	Error creating header windows.

Corrective Action:

-	Contact Technical Support.


Unable to select requested font
Message #1079 Unable to select the requested font

Possible Causes:

-	The selected combination of typeface, point size, and style is not available for the current configuration.

Corrective Action:

-	Select a different combination or change your configuration to include the desired combination.


Invalid value for tab setting
Message #1080 Invalid value number for tab setting

Possible Causes:

-	An invalid value has been entered for a tab setting.

Corrective Action:

-	Correct the entered value.


Duplicate tab position entered
Message #1081 Duplicate tab position entered

Possible Causes:

-	A duplicate tab position has been entered.

Corrective Action:

-	Remove the duplicate value.


No tabs locations have been entered
Message #1082 No tab locations have been entered.

Possible Causes:

-	Attempting to use the tab feature when no tab locations have been defined.

Corrective Action:

-	Use the Set Tab Stops command to enter tab locations.


Message #1084 - Error number accessing Configuration data. Run
Message #1084 - Error number accessing Configuration data. Run JfConfig to configure JetForm.

Possible Causes:

JetForm cannot find or cannot read the configuration files (JETFORM.ICS and JETFORM.ICF) for the printer, for which the form was compiled.

Corrective Action:

Use the JfConfig utility to recreate the configuration file for the printer in question or copy configuration files into JetForm directory.


Configuration file has invalid version
Message #1085 Configuration file has invalid version

Possible Causes:

-	The version of the configuration file is not the same as JetForm-Design.

-Corrective Action:

-	Re-install and reconfigure JetForm to ensure that a compatible configuration is created.


Error reading configuration file
Message #1086 Error reading form file

Possible Causes:

-	Configuration file has become corrupted because of damaged disk media or incomplete saving.

-	Disk drive cannot read the diskette.

-	Diskette is not in the disk drive.

Corrective Action:

-	Reconfigure JetForm.

-	Verify diskette is properly inserted in the disk drive and the correct drive and path are specified


Unable to get memory for configuration file
Message #1087 Unable to get memory to load configuration file

Possible Causes:

-	Windows has run out of available memory.

Corrective Action:

-	Close other windows to free up memory.


No configuration file was selected
Message #1088 No configuration file has been selected.

Possible Causes:

-	A configuration file must be selected to use JetForm Print Drivers.

Corrective Action:

-	Select a configuration file.


Invalid number of replicated copies
Message #1089 Invalid number of replicated copies

Possible Causes:

-	The value entered for Copies is invalid.

Corrective Action:

-	Correct the value in the Copies text box.


Invalid vertical offset
Message #1090 Invalid vertical offset

Possible Causes:

-	The entered vertical offset is invalid.

Corrective Action:

-	Correct the entered value.


Invalid horizontal offset
Message #1091 Invalid horizontal offset

Possible Causes:

-	The entered horizontal offset is invalid.

Corrective Action:

-	Correct the entered value


Message #1105
Message #1105 - Field fieldname - Character string or name is too long in expression calc expression.

Possible Causes:

A field name or quoted string in calc expression is too long.  The maximum length of 256 characters was exceeded.

Corrective Action:

Shorten the quoted string.  This could be done by using the concat function to join two or more shorter strings together.


Too many fonts
Message #1110 Too many fonts.

Possible Causes:

-	JetForm supports approximately 1000 fonts. There are more than 1000 fonts installed for your Windows default printer.

Corrective Action:

-	Reduce the number of Windows printer fonts.


File name is too long or contains an invalid character
Message #1111 File name is too long or contains an invalid character.

Possible Causes:

-	The entered file name is greater than 8 characters, contains spaces, or contains other characters that are invalid for a DOS file name.

Corrective Action:

-	Correct the file name.


Unable to load security library
Message #1114 Unable to load security library

Possible Causes:

-	An unauthorized copy of JetForm was installed.

-	JetForm copy protection was not transferred properly onto the hard disk.

-	JetForm was not properly de-installed before it was re-installed.

Corrective Actions:

-	Obtain an authorized version of JetForm.

-	De-install properly and then attempt to re-install JetForm.


* * Undefined message number* *
Message #1115 **Undefined Message number**

Possible Causes:

-	JetForm issued an undefined error message

Corrective Action:

-	contact technical support


Message #1116
Message #1116 - Unable to load custom command library library name (status error num)"

Possible Causes:

The Custom Command library (DLL) library name is not available to be loaded.  That may be because it is not in the directory that contains the JetForm executable files and not in any directory in the path.  It may also be because Windows resources are too low.

Corrective Action:

Ensure that library name is in an available directory.  Free some Windows resources by exiting other applications.


Message #1117
Message #1117 - Custom command error: command line.

Possible Causes:

command line is in incorrect format for defining a custom command.

Corrective Action:

Change the definition of the custom command in the .INI file.


Message #1118 Mandatory custom command parameter missing: comma
Message #1118 - Mandatory custom command parameter missing: command line.

Possible Causes:

A required parameter is missing from the custom command line in the .INI file.

Corrective Action:

Change the definition of the custom command in the .INI file.


Message #1119 Invalid custom command number: custom command.
Message #1119 - Invalid custom command number: custom command.

Possible Causes:

The command number in custom command definition in the .INI file is invalid.

Corrective Action:

Change the command number in the custom command line in the .INI file.


Cannot select a Windows compiled form for alternate printing;us
Message #1155 Cannot select a Windows compiled form for alternate printing; using current form

Possible Causes:

-	The alternate form that JetForm tried to print with was compiled using Windows drivers.

Corrective Action:

-	Use only forms compiled for JetForm drivers for alternate form printing.


Message #1180
Message #1180 - X position coordinate of object is not valid; please re-enter

Possible Causes:

The X coordinate entered is not valid.  It must be no greater than 20.0 inches.

Corrective Action:

Adjust the X coordinate to be a reasonable value.


Message #1181
Message #1181 - Y position coordinate of object is not valid; please re-enter

Possible Causes:

The Y coordinate entered is not valid.  It must be no greater than 20.0 inches.

Corrective Action:

Adjust the Y coordinate to be a reasonable value.


Message #1182
Message #1182 - Width width of object is not valid; please re-enter

Possible Causes:

The width entered is not valid.   The width must be no greater that 20.0 inches.

Corrective Action:

Adjust the width to a reasonable value.


Message #1183
Message #1183 - Height height of object is not valid; please re-enter

Possible Causes:

The height entered is not valid.   The width must be no greater that 20.0 inches.

Corrective Action:

Adjust the height to a reasonable value.


Message #1221
Message #1221 - Custom document variable name contains invalid characters

Possible Causes:

The document variable name must contain only letters, digits or underscores.

Corrective Action:

Remove the invalid characters from the document variable name.


Message #1222
Message #1222 - Cannot redefine a standard documentation variable

Possible Causes:

The document variable name is one of the standard ones.  You must use a different name.

Corrective Action:

Change the document variable name to something other than the standard ones.


Message #1223
Message #1223 - This custom document variable name already exists

Possible Causes:

Document variable names must be unique.  You have already used this name.

Corrective Action:

Change the document variable name to make it unique.


Message #1224
Message #1224 - A document variable name must be given

Possible Causes:

You have not provided a document variable name.  A variable name must be provided.

Corrective Action:

Enter a document variable name.


Message #1249
Message #1249 - Under Windows, all pages must have the same orientation.  Do you really want to set all pages to the selected orientation?

Possible Causes:

You have different page orientations within the form file.  All pages must have the same orientation when using Windows printing.

Corrective Action:

Either switch to use a JetForm print driver or set all pages to the same orientation.


Message #1253
Message #1253 - Invalid height for column titles.

Possible Causes:

Column title height is not a valid value.   The height must not be negative.

Corrective Action:

Change the title height to something greater than zero inches.


Message #1254
Message #1254 - Invalid # of rows for a table.  Must be between 1 and 200.

Possible Causes:

The number of rows for the table is invalid.  There must be between 1 and 200 rows in the table.

Corrective Action:

Change the number of rows to a valid value.


Message #1255
Message #1255 - Invalid # of columns for a table.  Must be between 1 and 200.

Possible Causes:

The number of columns for the table is invalid.  There must be between 1 and 200 columns in the table.

Corrective Action:

Change the number of columns to a valid value.


Message #1256
Message #1256 - Invalid character in group name.

Possible Causes:

The name of the group contains special characters.

Corrective Action:

Change the name to include digits, letters and underscores only.


Message #1700 - Error creating OLE Object. Error Type (number),
Message #1700 - Error creating OLE Object. Error Type (number), Error (number)

Click on one of the following for further information:

ERROR TYPE 0

ERROR TYPE 1

ERROR TYPE 2

ERROR TYPE 3

ERROR TYPE 4


Error creating file Filename.
Message #2001 Error creating file Filename.

Possible Causes:

-	Insufficient space on disk to create compiled form file.

-	Attempting to write to a network drive without write privileges.

-	Diskette is not properly inserted in drive or is incompatible with drive.

Corrective Action:

-	Delete unwanted files from disk to increase available disk space.

-	Check network drive attributes or select another drive.

-	Verify diskette is compatible with drive and is properly inserted.


Error writing MDF header.
Message #2002 Error Writing MDF header.

Possible Causes:

-	Insufficient space on disk to create compiled form header.

-	Attempting to write to a network drive without write privileges.

-	Diskette is not properly inserted in drive or is incompatible with drive.

Corrective Action:

-	Delete unwanted files from disk to increase available disk space.

-	Check network drive attributes or select another drive.

-	Verify diskette is compatible with drive and is properly inserted.


Error reading page number of document.
Message #2003 Error reading page number of document.

Possible Causes:

-	Data on specified page has become corrupted.

Corrective Action:

-	Copy specified page to clipboard, delete page, open new page and then paste from clipboard to new page.

-	Delete specified page and redesign it.


Error opening font file filename.
Message #2004 Error opening font file filename.

Possible Causes:

-	Soft fonts do not exist in the directory specified during configuration.

-	Soft font files are not usable with current configuration.

Corrective Action:

-	Run JFConfig and re-configure soft fonts compatible with the specified configuration


Error writing output.
Message #2006 Error writing output

Possible Causes:

-	Communication breakdown between printer and JetForm.

-	Error writing to disk when using a printer-ready file.

-	Printer jammed, out of paper, printer not switched on etc..

Corrective Action:

-	Check printer for errors.

-	Check printer cable(s) to verify it is properly plugged in.

-	Verify that there is sufficient free space on disk to write file.


Error opening logo file 'Filename'.
Message #2007 Error opening logo File 'Filename'.

Possible Causes:

-	Logo file specified is not in the same directory as it was when the form was designed.

-	Logo file specified is not in the same directory as it was when the form was compiled.

-	Entered file name does not exist.

Corrective Action:

-	Put the logo file in exactly the same directory as it was when the form was designed.

-	Put the logo file in exactly the same directory as it was when the form was compiled (Note: If this error was received when loading a form into Filler/G, it should not be of great concern since logos are compiled into the form and even if this error is ignored the logo will still appear during printing; although it will not be visible on the screen).

-	Ensure that the entered file name is correct and exists on the specified drive and directory.


Error reading logo file Filename.
Message #2008 Error reading logo file Filename.

Possible Causes:

-	Logo file data is corrupted.

-	Diskette is not properly inserted into drive.

Corrective Action:

-	Use a backup copy of the logo file.

-	Verify diskette is properly inserted in drive.

-	Try a different diskette.


Message #2016
Message #2016 - Unable to create BitMap temp file, filename."

Possible Causes:

-	Write access to the temp. file directory not allowed.

-	The disk that the temp. file directory is on is full.

Corrective Action:

-	Acquire write access to the temp. file directory.


Message #2017
Message #2017 - Unable to move through BitMap file, filename.

Possible Causes:

-	filename could not be accessed properly.

Corrective Action

-	Make sure that the temp. file is available for writing.


Message #2018
Message #2018 - Unable to fwrite to BitMap file, filename.

Possible Causes:

-	Write access to the temp. file directory not allowed.

-	The disk that the temp. file directory is on is full.

Corrective Action:

-	Acquire write access to the temp. file directory.


Message #2019
Message #2019 - Unable to move through BitMap file, filename.

Possible Causes:

The file could not be accessed properly.

Corrective Action:

Make sure that the temp. file is available for writing.


Message #2020
Message #2020 - Unable to read from BitMap file, filename.

Possible Causes:

The file could not be read properly.

Corrective Action:

Make sure you have read access to the file.


Message #2021
Message #2021 - Unable to close BitMap file, filename.

Possible Causes:

The file could not be accessed properly.

Corrective Action:

Make sure that the temp. file is available for writing.


Message #2022
Message #2022 - Unable to delete BitMap temp file, filename.

Possible Causes:

The file could not be accessed properly.

Corrective Action:

Make sure that the temp. file is available for writing.


Message #2023
Message #2023 - Unable to add Horizontal Line to BitMap.

Possible Causes:

The file could not be accessed properly.

Corrective Action:

Make sure that the temp. file is available for writing.


Form exported to file name
Message # 4012 Form exported to file name

Possible causes:

A file was selected to export to.


Form file name has been stored on the clipboard. The form may n
Message # 4015 Form file name has been stored on the clipboard. The form may now be pasted in

Possible causes:

A form file was selected to copy from.


No spelling errors were encountered
Message # 5090 No spelling errors were encountered

Possible causes:

No spelling errors were found


Spell checking is complete
Message # 5091 Spell checking is complete

Possible causes:

The spelling checker finished checking all selected areas on the form.


Message #5135

This error message warns that you attempted to start a second copy of JetForm Server.


Message #7010 - E-Mail program invoked with no parameters

Possible Causes:

this is only for Filler/C.


Message #7015 - Unable to send message

Possible Causes:

Corrective Action:


Message #7026 - Unable to access export file

Possible Causes:

Corrective Action:


Message #7027 - Unable to create mail-box list file

Possible Causes:

Corrective Action:


Message #7028 - Unable to create attachment file

Possible Causes:

Corrective Action:


Message #7029 - Unable to read mail-box list file

Possible Causes:

Corrective Action:


Message #7030 - No incoming mail

Possible Causes:

Filler/C only


Message #7034 - Unable to redirect mail program output

Possible Causes

Filler/C only.


Message #7035 - Warning: this message contains non-JetForm atta
Message #7035 - Warning: this message contains non-JetForm attachment(s)

Possible Causes

a 3.1 message.

Corrective Action:


Message #7073
Message #7073 Warning: Message includes form, but form file has potential to change along the route

Possible causes:

The form has a MAIL_FORM field and the "Send form with data" option has been selected.

Corrective Action:

None. To send the message, follow the usual procedure. The form will not be sent with the message.


Invalid Form File.
Message #2 Invalid Form File

Possible Causes:

-	The form file specified is not a JetForm form file.

Corrective Action:

-	Make sure file and path name are correct.


Unable to open file 'Filename'.
Message #20 Unable to open file Filename.

Possible Causes:

-	File name or search path was incorrectly entered.

-	File is located in a directory other than the one specified.

-	File is a protected file or if you are on a network, it is a protected network file.

-	File does not exist.

Corrective Action:

-	Correct search path or file name.

-	Change file or network attributes to make it accessible.


Switching to use Non-Database (ASCII) file format.
Message #4010 Switching to use Non-Database (ASCII) file format.

Possible Causes:

-	Created a new data file after the form was loaded, and the form is not compatible with the database format.


Unable to export an unnamed document.
Message #4011 Unable to export an unnamed document.

Possible Causes:

-	A filename has not been specified.

Corrective Action:

-	Specify a filename.


Error errnum using progname to display report.
Message #4013 Error errnum using progname to display report.

Possible Causes:

-	Tried to display a report using a non-existent program name.

-	Out of memory trying to display a report.

Corrective Action:

-	Make sure that NOTEPAD.EXE is available in a directory in your path.

-	Close down other applications to free memory.


Text from file name has been stored on the clipboard. The text
Message #4014 Text from file name has been stored on the clipboard. The text may now be pasted into a text block.

Possible causes:

A file was selected to copy from.


Error reading File.
Message #5 Error Reading File

Possible Causes:

-	File data has become corrupted because of damaged disk media or incomplete saving.

-	File is being read from a diskette that has become damaged.

-	Disk drive cannot read the diskette.

-	Diskette is not in disk drive.

Corrective Action:

-	Try to load a different copy of the file or use a back-up copy if it is available. JetForm makes a backup copy of every form each time it is saved. These backups are stored in the same directory as the form file with identical file prefixes and the extension .BAK.

-	Verify diskette is properly inserted in the disk drive and the correct drive and path are specified.


Unable to load Language/Spelling library JFLMLIB.DLL, status: s
Message #5040 Unable to load Language/Spelling library JFLMLIB.DLL, status: status

Possible Causes:

-	A needed file is missing from the hard disk.

-	Out of memory trying to check spelling.

Corrective Action:

-	Replace the missing file.

-	Close down other applications to free memory.


Spell-checking preference missing, File: filename, Section: [se
Message #5041 Spell-checking preference missing, File: filename, Section: [section], Keyword: key

Possible Causes:

-	One or more files used by the spelling checking software are missing

-	One or more of the preferences defined by the spelling checker are missing from the JetForm .INI file.

Corrective Action:

-	Contact JetForm technical support.


Unable to initialize spell-checking system
Message #5042 Unable to initialize spell-checking system

Possible Causes:

-	The spell-checking software was unable to initialize.


Unable to read language file
Message #5043 Unable to read language file

Possible Causes:

-	One or more files used by the spelling checking software are missing

-	One or more of the preferences defined by the spelling checker are missing from the JetForm .INI file.

Corrective Action:

-	Contact JetForm technical support.


Unable to establish language for spell-checking
Message #5044 Unable to establish language for spell-checking

Possible Causes:

-	One or more files used by the spelling checking software are missing

-	One or more of the preferences defined by the spelling checker are missing from the JetForm .INI file.

Corrective Action:

-	Contact JetForm technical support.


Unable to open spell-checking file (corelex)
Message #5045 Unable to open spell-checking file (corelex)

Possible Causes:

-	One or more files used by the spelling checking software are missing

-	One or more of the preferences defined by the spelling checker are missing from the JetForm .INI file.

Corrective Action:

-	Contact JetForm technical support.


Unable to open spell-checking file (linguibase)
Message #5046 Unable to open spell-checking file (linguibase)

Possible Causes:

-	One or more files used by the spelling checking software are missing

-	One or more of the preferences defined by the spelling checker are missing from the JetForm .INI file.

Corrective Action:

-	Contact JetForm technical support.


Unable to establish spell-checking cache
Message #5047 Unable to establish spell-checking cache

Possible Causes:

-	Out of memory.

Corrective Action:

-	Close some other applications and try again.


Unable to open spell-checking file (user dictionary)
Message #5048 Unable to open spell-checking file (user dictionary)

Possible Causes:

-	One or more files used by the spelling checking software are missing

-	One or more of the preferences defined by the spelling checker are missing from the JetForm .INI file.

Corrective Action:

-	Contact JetForm technical support.


Unable to word to internal memory
Message #5049 Unable to add word to internal memory

Possible Causes:

-	Out of disk space

-	Dictionary corrupted.

Corrective Action:

-	Delete unneeded files to clear some disk space.

-	Contact JetForm technical support.


Unable to add word to user dictionary
Message #5050 Unable to add word to user dictionary

Possible Causes:

-	Out of disk space

-	Dictionary corrupted.

Corrective Action:

-	Delete unneeded files to clear some disk space.

-	Contact JetForm technical support.


Word is invalid;cannot be remembered
Message #5051 Word is invalid; cannot be remembered

Possible Causes:

-	Spell checker was not able to add the word to the dictionary.


Error writing File.
Message #6 Error Writing File.

Possible Causes:

-	File is too large for available disk space.

-	Trying to save to a network drive without write privileges.

-	Diskette is not in the diskette drive.

Corrective Actions:

-	Increase the available disk space by deleting unwanted files.

-	Change network specifications.

-	Use another diskette or drive with more available disk space.

-	Verify diskette is properly inserted in the diskette drive and the correct drive and path are specified.


Out of Memory
Message #7 Out of Memory.

Possible Causes:

-	JetForm has run out of allocated local memory.

Corrective Action:

-	Reduce number of elements on form.

-	Contact JetForm Technical Support.


Write Error on E-Mail File
Message #7002 Write error on E-Mail file

Possible Causes:

-	JetForm Filler is unable to write one of its temporary files.

Corrective Action:

-	Ensure that the TEMP variable is set to a valid drive and directory where you have privileges to read, write, and delete files.

-	Ensure that there is sufficient free disk space to create temporary files.


Unable to open error message file
Message #7013 Unable to open error message file

Possible Causes:

-	The error log file for the mail package could not be found.

Corrective Action:

-	Ensure that there is sufficient free disk space for the mail package to create the error log file.

-	Check the mail package to determine if there are problems with log-in or access to the mail database.


Unable to invoke mail program
Message #7016 Unable to invoke mail program

Possible Causes:

-	The program required could not be invoked because it has not been installed or is incorrectly specified within the .INI file.

Corrective Action:

-	Verify that the program has been installed and update the .INI file if necessary.


Unable to invoke mail-box list program
Message #7025 Unable to invoke mail-box list program

Possible Causes:

-	The program required by the mail package could not be invoked because it has not been installed or is incorrectly specified within the .INI file.

Corrective Action:

-	Verify that the program has been installed and update the .INI file if necessary.


Attachment cannot be found
Message #7037 Attachment cannot be found

Possible Causes:

-	The attachment is not in the current directory and a complete path has not been specified.

Corrective Action:

-	Define a complete file specification for the attachment.


Unable to read receipt information file to mail
Message #7047 Unable to read receipt information file to mail

Possible Causes:

-	JetForm Filler is unable to read the receipt information which was "packed" into the .JFM attachment. This could indicate a corruption of the file on disk.

Corrective Action:

-	This could indicate a potential hardware problem. Verify the integrity of the disk.

-	It may be necessary to have the sender re-issue the mail message.


Unable to create receipt information file
Message #7048 Unable to create receipt information file

Possible Causes:

-	File is too large for available disk space.

-	Trying to write to a network drive without write privileges.

-	Diskette is not in the diskette drive.

Corrective Actions:

-	Increase the available disk space by deleting unwanted files.

-	Change network specifications.

-	Use another diskette or disk drive with more available disk space.

-	Ensure diskette is properly inserted in the disk drive and the correct drive and path are specified.


No E-Mail DLL has been specified in the JFEMAIL.INI file
Message #7105 No E-Mail DLL has been specified.

Possible Causes:

-	.INI file does not have the required mail interface DLL preference (VendorDLLName in the section [JfEMail - system]). This could be due to an incomplete installation of JetForm Filler or incorrect editing.

Corrective Action:

-	Reinstall JetForm Filler or correct the error.


Cannot save form to filename
Message #7111 Cannot save form to filename.

Possible Causes:

-	The form file could not be saved during a Save Form operation.

Corrective Action:

-	Ensure that there is sufficient free disk space and that you have the appropriate permissions to create a file on the target drive/directory.


Error Creating File.
Message #8 Error Creating File.

Possible Causes:

-	File is too large for available disk space.

-	Trying to write to a network drive without write privileges.

-	Diskette is not in the diskette drive.

Corrective Actions:

-	Increase the available disk space by deleting unwanted files.

-	Change network specifications.

-	Use another diskette or disk drive with more available disk space.

-	Verify diskette is properly inserted in the disk drive and the correct drive and path are specified.


Page does not exist.
Message #9 Page does not exist.

Possible Causes:

-	Page does not exist.

Corrective Action:

-	Verify file and page specified are correct.


Save current changes : Filename.
Message #915 Save current changes : Filename.

Possible Causes:

-	File has been altered since it was last saved; current changes will be lost unless saved.


You must specify a Filename.
Message #916 You must specify a Filename.

Possible Causes:

-	A filename has not been specified.

Corrective Action:

-	Specify a filename.


Replace existing Filename?
Message #923 Replace existing Filename?

Possible Causes:

-	A file already exists with the specified filename.

Corrective Action:

-	Click on OK to overwrite existing file or change filename.


Invalid number of copies
Message #928 Invalid number of copies.

Possible Causes:

-	A non-numeric value was entered in the Copies text box.

Corrective Action:

-	Replace the entered value with a numeric value.


Unable to output to the clipboard.
Message #929 Unable to output to the clipboard.

Possible Causes:

-	Windows clipboard is not available.

-	Selected data is too large to fit on clipboard.

Corrective Action:

-	Verify Windows clipboard is properly installed (see Windows manual).

-	Select smaller quantity of data to be copied to clipboard.


Cannot currently load compressed TIFF.
Message #930 Cannot currently load compressed TIFF.

Possible Causes:

-	TIFF file cannot be accessed by JetForm

Corrective Action:

-	Decompress TIFF file.


Scale factor must be between .01 and 100.
Message #931 Scale factor must be between .01 and 100.

Possible Causes:

-	Scale factor specified was beyond the available .01 to 100 range.

Corrective Action:

-	Specify scale factor between .01 and 100.


File JETFORM.DEV not found.
Message #947 File JETFORM.DEV not found

Possible Causes:

-	The file JETFORM.DEV is missing from your configuration directory.

Corrective Action:

-	Re-install JetForm-Design. If the error persists, or if the file JETFORM.DEV is in your configuration directory, contact technical support.


Invalid macro number.
Message #948 Invalid macro number.

Possible Causes:

-	Invalid characters were entered as macro number such as letters, extended characters, etc..

Corrective Action:

-	Verify macro number only contains numbers.


Help file not found.
Message #953 Help file not found.

Possible Causes:

-	Help files could not be found by JetForm.

Corrective Action:

-	Copy help files into JetForm directory.

-	Re-install JetForm.


Unable to create an Atom.
Message #960 Unable to create ATOM.

Possible Causes:

-	A problem has been found with the internal file structure

Corrective Action:

-	Contact technical support.


Invalid ATOM identifier (Hex = 'Hexvalue' - Value = 'Value').
Message #961 Invalid ATOM identifier (Hex = Hex - Value = 'Value').

Possible Causes:

-	A problem has been found with the internal file structure.

Corrective Action:

-	Contact technical support.


You are not authorized to use this program
Message #962 You are not authorized to use this program

Possible Causes:

-	you are not running an authorized version of the JetForm software

Corrective Action:

-	purchase an authorized version of the software


Error updating 'Section' section of 'INIFILE.INI.
Message #964 Error updating 'Section' Section 'INIFILE.INI'.

Possible Causes:

-	Cannot find INIFILE.INI in the Windows directory.

-	INIFILE.INI is write protected or is on a network drive that is write protected

Corrective Action:

-	Copy INIFILE.INI into the Windows directory.

-	Change file or network attributes.


Error writing to spool file. Print cancelled.
Message #965 Error writing to spool file. Print cancelled.

Possible Causes:

-	Spooler is not working properly with JetForm.

-	Insufficient disk space to write spooler file.

Corrective Action:

-	If disk is full delete unwanted files.

-	Attempt to print again to the spooler. If problem persists, print without the spooler.


Field 'fieldname' - Missing closing bracket in expression 'expr
Message #969 Field 'fieldname' - Missing closing bracket in expression 'expression'.

Possible Causes:

-	Missing a closing bracket in calculation or validation of the specified field.

Corrective Action:

-	Verify syntax of the calculation or validation for the specified field to ensure that all brackets are included.


Field 'fieldname' -  Syntax error in expression 'expression'.
Message #970 Field 'fieldname' - Syntax error in expression 'expression'.

Possible Causes:

-	Bad or incomplete syntax in specified field calculation or validation.

-	Improper command in specified field calculation.

Corrective Action:

-	Verify syntax is correct according to validation/calculation on-line help or consult the JetForm-Design Reference Manual.


Field 'fieldname' - Unknown function call in expression 'expres
Message #971 Field 'fieldname' - Unknown function call in expression 'expression'.

Possible Causes:

-	Function call in the calculation or validation of the specified field was not recognized by JetForm.

Corrective Action:

-	Verify that the syntax of the specified calculation is correct.


Incorrect number of arguments for function
Message #972 Field 'fieldname' - Incorrect number of arguments to function call in expression 'expression'.

Possible Causes:

-	Function call in the calculation or validation of the specified field was not recognized by JetForm.

-	Syntax in calculation/validation of specified fields has too few or too many arguments.

Corrective Action:

-	Verify that the syntax of the specified calculation is correct.


Error accessing database 'database' using index 'index'.
Message #977 Error accessing database 'database' using 'index'.

Possible Causes:

-	Database file path or file name was entered incorrectly in the field calculation.

-	Database file specified cannot be found by JetForm in the JetForm directory.

-	Database file specified cannot be found in the path defined in the field calculation.

-	Database index file path or file name was entered incorrectly in the field calculation.

Corrective Action:

-	Change file and/or path name to point to the directory containing database file and/or index.

-	Copy the database file and/or index into the directory or drive specified in field calculation or validation.


Dropped Unknown Field Names
Message #1108 Dropped Unknown Field Names

Possible Causes:

-	The lock fields calculation for this field references fields that are not on the page. This could happen if the referenced fields were deleted after the lock fields calculation was created..

Corrective Action:

-	No action required. JetForm removes unknown fields from the lock fields list..


Calculation operations table is too large
Message #1109 Calculation operations table is too large.

Possible Causes:

-	The number of calculations and interdependencies between them is too large for the internal operations table..

Corrective Action:

-	Try to reduce the number of interdependencies between the fields. For example, try to use the Sum function to create summary calculations rather than restate all the fields several times within arithmetic functions.


Unable to obtain sufficient memory for logo rotation
Message #2009 Unable to get sufficient memory for logo rotation

Possible Causes:

-	Windows has run out of available memory

Corrective Action:

-	Close other windows to free up memory

-	Simplify your form, if possible.


Unable to load printer driver
Message #2015 Unable to load printer driver

Possible Causes:

-	Printer driver could not be found in the JetForm directory.

-	There was insufficient memory available for JetForm to load the printer driver

Corrective Action:

-	Verify that the identified file is in the JetForm directory and if not, copy it into the directory (this may require re-installing JetForm).

-	Close down any unnecessary Windows applications to increase the available memory.


Unable to write buffer to .MDF file
Message #2024 Unable to write buffer to MDF file

Possible Causes:

-	Insufficient disk space.

-	Attempting to write compiled form to a drive and directory without write privileges.

Corrective Action:

-	Delete unwanted files to increase available disk space.

-	Ensure that write privileges are available on the target drive and directory.


Font not found in .CFG file
Message #2054 Font not found in DRIVER.CFG file

Possible Causes:

-	A typeface configured for the default Windows printer could not be matched in the identified .CFG file. This is only a warning.


Error allocating memory
Message #4001 Error allocating memory

Possible Causes:

-	Windows has run out of available memory.

Corrective Action:

-	Close other windows to free up memory.


Too many entities on this page
Message #4002 Too many entities on this page

Possible Causes:

-	The page contains too many entities.

Corrective Action:

-	Delete some entities.

-	Consolidate entities if possible, using boxes instead of individual lines; combining text items, etc.


Too many entities of a given entity type
Message #4003 Too many entities of a given entity type

Possible Causes:

-	There are too many entities of the identified type.

Corrective Action:

-	Try to consolidate the entities such as combining text or using boxes instead of individual lines, etc.


Invalid # of columns for a barcode field
Message #4005 Invalid # of columns for a barcode field

Possible Causes:

-	The value entered for the number of characters is too large.

Corrective Action:

-	Reduce the number of characters.


Unable to select the requested font
Message #4006 Unable to select the requested font

Possible Causes:

-	The requested font is invalid for the current configuration.

Corrective Action:

-	Select another font or change the configuration to include the desired font..


Leaving as current font
Message #4007 Leaving as current font

Possible Causes:

-	A font selection could not be implemented. The originally active font is not changed..


Unable to enumerate printer fonts
Message #4008 Unable to enumerate printer fonts.

Possible Causes:

-	Printer font information could not be retrieved from the print driver for the Windows default printer.

Corrective Action:

-	The print driver may be incompatible or out-of-date for the version of Windows. Re-install the printer through the Windows Control Panel.


No barcode styles have been configured
Message #952 No barcode styles have been configured

Possible Causes:

-	The barcode font cartridge was not selected in JFConfig.

-	Barcodes are not supported by your printer.

Corrective Action:

-	Run JfConfig and select the barcode font cartridge


Unable to load printer font data
Message #968 Error loading font information into memory

Possible Causes:

-	Windows has run out of available memory.

Corrective Action:

-	Close other windows to free up memory.


Field overlaps another field
Message #1004 Warning ...field fieldname overlaps another field

Possible Causes:

-	Some fields in a form are overlapping, therefore some data may be superimposed during data merging.

Corrective Action:

-	Check for misplaced fields.


Not authorized to open this MDF
Message #1019 This MDF file is not authorized to be opened by JetForm-Design

Possible Causes:

-	The form was not compiled with a security level that allows it to be opened within JetForm-Design.

Corrective Action:

-	Access the source (.IFD) form file.


MDF or FRM must be requested
Message #1027 At least one of the files: ('.MDF' or '.FRM') should be requested

Possible Causes:

-	Both the check boxes to generate a compiled form (.MDF) or a screen definition file (.FRM) were left blank.

Corrective Action:

-	You must select at least one of the check boxes..


At least two radio buttons must be in the group
Message #1060 There must be at least two radio buttons selected to do this grouping

Possible Causes:

-	At least two radio buttons must be picked before you can create a radio button group.

Corrective Action:

-	Pick at least two radio buttons.


The next field could not be assigned
Message #1153 The selected next field could not be assigned

Possible Causes:

-	The actual field was specified as the next field for itself.

-	A field is being specified as the next field for two fields.

Corrective Action:

-	Respecify the next field attributes


Cannot extract default Windows printer information
Message #1252 Cannot extract the Windows default printer information

Possible Causes:

-	The required printer information could not be obtained for the default Windows printer.

Corrective Action:

-	Ensure your Windows default printer is correctly configured.

-	Verify your default printer setup with other Windows applications such as Notepad or Write.


Save current changes?
Message #1802 Save current changes?

Possible Causes:

-	Selecting Exit without saving changes made to the currently open object.

Corrective Action:

-	Select Yes to save changes.

-	Select No to exit without saving.


You must enter an object title
Message #1805 You must enter an object title

Possible Causes:

-	The object title has been left blank.

Corrective Action:

-	Enter an object title.


.CFG file not found for JetForm Driver printing
Message #2053 .CFG file not found for JetForm Driver printing

Possible Causes:

-	The .CFG file which matches your default Windows printer type is not in the JetForm configuration directory.

Corrective Action:

-	Use Printer Setup to choose Windows Configuration, Windows Printing.

-	Install the JetForm Print Driver which corresponds to your default Windows printer. (Run the JetForm SETUP program again, select the printer driver, and switch off Full Install).


Message #8002 Ascii/Merge: Missing form name

Possible Causes

Corrective Action:

Message #8001 Ascii/Merge: Ran out of memory

Possible Causes

Corrective Action:

Message #8003 Ascii/Merge: I/O error

Possible Causes

Corrective Action:

Message #8004 Ascii/Merge: Bad layout in Form File

Possible Causes

Corrective Action:

Message #8005 Ascii/Merge: Unknown field in data file

Possible Causes

Corrective Action:

Message #8007 Ascii/Merge: Invalid parameters

Possible Causes

Corrective Action:

Message #8008 Ascii/Merge: A file open failed

Possible Causes

Corrective Action:


Message #9010 Column number was not selected in rule #1.

Possible Causes

A database select rule is improperly constructed. Its syntax references columns which should be selected in rule #1, however, those columns are not selected in rule #1.

Corrective Action:

Correct the database select rule form design to either add more columns to those being selected in rule #1 or correct the references to rule #1 columns in the subsequent select rules.


ERROR TYPE 0

0  Basic OLE Errors

-1	Relatively catastrophic failure

1	Not implemented

2	Ran out of memory

3	One or more arguments are invalid

4	No such interface supported

5	Invalid pointer

6	Invalid handle

7	Operation aborted

8	Unspecified error

9	General access denied error


ERROR TYPE 1

1  Remote Procedure Call Errors

1	Call was rejected by callee

2	Call was canceld by call - returned by MessagePending this code only occurs if MessagePending return cancel

3	The caller is dispatching an intertask SendMessage call and NOT call out via PostMessage

4	The caller is dispatching an asynchronus call can NOT an outgoing call on behalf of this call

5	The caller is not in a state where an outgoing call can be made is the case if the caller has an outstandig call and incoming call was excepted by HIC; now the caller is allowed to call out again

6	The connection terminated or is in a bogus state can not be used any more. Other connections still valid.

7	The callee (server [not server application]) is not available disappeared; all connections are invalid

8	The caller (client ) disappeared while the callee (server) was a call

9	The data packet with the marshalled parameter data is incorrect

10	The call was not transmitted properly; the message queue full and was not emptied after yielding

11	The client (caller) can not marshall the parameter data unmarshall the return data - low memory etc.

12	The client (caller) can not marshall the parameter data unmarshall the return data - low memory etc.

13	The server (caller) can not unmarshall the parameter data marshall the return data - low memory

14	The server (caller) can not unmarshall the parameter data or marshall the return data - low memory

15	Received data are invalid; can be server or data

16	A particular parameter is invalid and can not be un/marshalled

17	DDE conversation - no second outgoing call on same channel

-1	An internal error occured


ERROR TYPE 2

Dispatch Related Errors

1  UNKNOWNINTERFACE

3  MEMBERNOTFOUND

4  PARAMNOTFOUND

5  TYPEMISMATCH

6  UNKNOWNNAME

7  NONAMEDARGS

8  BADVARTYPE

9  EXCEPTION

10 OVERFLOW

11 BADINDEX

12 UNKNOWNLCID

13 ARRAYISLOCKED

14 BADPARAMCOUNT

15 PARAMNOTOPTIONAL

16 BADCALLEE

17 NOTACOLLECTION

32790  BUFFERTOOSMALL

32792  INVDATAREAD

32793  UNSUPFORMAT

32796  REGISTRYACCESS

32797  LIBNOTREGISTERED

32807  UNDEFINEDTYPE

32808  QUALIFIEDNAMEDISALLOWED

32809  INVALIDSTATE

32810  WRONGTYPEKIND

32811  ELEMENTNOTFOUND

32812  AMBIGUOUSNAME

32813  NAMECONFLICT

32814  UNKNOWNLCID

32815  DLLFUNCTIONNOTFOUN

35005  BADMODULEKIND

35013  SIZETOOBIG

35014  DUPLICATEID

36000  TYPEMISMATCH

36001  OUTOFBOUNDS

36002  IOERROR

36003  CANTCREATETMPFILE

40010  CANTLOADLIBRARY

40067  INCONSISTENTPROPFUNCS

40068  CIRCULARTYPE


ERROR TYPE 3

Storage Errors

DOS storage errors

1  INVALIDFUNCTION

2  FILENOTFOUND

3  PATHNOTFOUND

4  TOOMANYOPENFILES

5  ACCESSDENIED

6  INVALIDHANDLE

8  INSUFFICIENTMEMORY

9  INVALIDPOINTER

18 NOMOREFILES

19 DISKISWRITEPROTECTED

25 SEEKERROR

29 WRITEFAULT

30 READFAULT

32 SHAREVIOLATION

33 LOCKVIOLATION

80 FILEALREADYEXISTS

87 INVALIDPARAMETER

112 MEDIUMFULL

250 ABNORMALAPIEXIT

251 INVALIDHEADER

252 INVALIDNAME

253 UNKNOWN

254 UNIMPLEMENTEDFUNCTION

255 INVALIDFLAG

OLE storage errors

256 INUSE

257 NOTCURRENT

258 REVERTED

259 CANTSAVE

260 OLDFORMAT

261 OLDDLL

262 SHAREREQUIRED

263 NOTFILEBASEDSTORAGE

264 EXTANTMARSHALLINGS


ERROR TYPE 4

Errors Used By OLE

By convention, OLE interfaces divide the range of errors into nonoverlapping subranges.  If an OLE interface returns an error type 4, it must be from the range associated with that interface or from the shared range: 0 - 255.

The error ranges and their associated interfaces are given below.

0 - 255   Generic OLE errors that may be returned by many interfaces

0	Invalid OLEVERB structure

1	Invalid advise flags

2	You can't enuemrate any more, because the associated data is missing

3	This implementation doesn't take advises

4	There is no connection for this connection id

5	Need run the object to perform this operation

6	There is no cache to operate on

7	Uninitialized object

8	Linked object's source class has changed

9	Not able to get the moniker of the object

10	Not able to bind to the source

11	Object is static, operation not allowed

12	User cancelled out of save dialog

13	Invalid rectangle

14	Compobj.dll is too old for the ole2.dll initialized

15	Invalid window handle

16	Object is not in any of the inplace active states

17	Not able to convert the object

18	Not able to perform the operation because object is not given storage yet.

100	Invalid FORMATETC structure

101	Invalid DVTARGETDEVICE structure

102	Invalid STDGMEDIUM structure

103	Invalid STATDATA structure

104	Invalid lindex

105	Invalid tymed

106	Invalid clipboard format

107	Invalid aspect(s)

108	The tdSize paramter of the DVTARGETDEVICE structure is invalid

109	Object doesn't support IViewObject interface

256 - 271 Drag and Drop Interface Errors

256	Trying to revoke a drop target that has not been registered

257	This window has already been registered as a drop target

258	Invalid window handle

272 - 287 Class Factory Interface Errors

272	Class does not support aggregation (or class object is remote)

273	DLL doesn't support that class (returned from DllGetClassObject)

288 - 303 Mashaling Interface Errors

304 - 319 Data Object Interface Errors

320 - 335 View Object Interface Errors

336 - 351 Registration Database Errors

336	Some error reading the registration database

337	Some error reading the registration database

338	Some error reading the registration database

339	Some error reading the registration database

340	Some error reading the registration database

341	Some error reading the registration database

352 - 367 Unknown Errors

368 - 383 Ole Cache Interface Errors

368	No Cache to update

384 - 399 Ole Object Interface Errors

384	No verbs available

385	Invalid verb

400 - 415 Ole Client Site Interface Errors

416 - 431 Visual Editting Interface Errors

416	Undo is not avaiable

417	Space for tools is not available

432 - 447 Enumerator Interface Errors

448 - 463 Storage Conversion Interface Errors

448	OLESTREAM Get method failed

449	OLESTREAM Put method failed

450	Contents of the OLESTREAM not in correct format

451	There was in an error in a Windows GDI call while converting the bitmap a DIB.

452	Contents of the IStorage not in correct format

453	Contents of IStorage is missing one of the standard streams ("\1CompObj", 1Ole", "\2OlePres000").  This may be the storage for a DLL object, or a that does not use the def handler.

454	There was in an error in a Windows GDI call while converting the DIB a bitmap.

464 - 479 Clipboard Interface Errors

464	OpenClipboard Failed

465	EmptyClipboard Failed

466	SetClipboard Failed

467	Data on clipboard is invalid

468	CloseClipboard Failed

480 - 495 Moniker Interface Errors

480	OLE needed to connect to a network device that is not available

481	A time out occurred while establishing a link or retrieving a links

482	Moniker is only available in a generic format

483	The time of last change is unavalable

484	Syntax error in filename.

485	Unable to find a required object

486	Invalid extension.  No Class ID was found and the extension is not in the registration database

487	An object was found but did not support the required interfaces

488	Incomplete moniker supplied for the operation

489	Tried to revoke an object that was not bound

490	Can not open file

491	The operation could not succeed without user intervention

492	Could not retrieve the Relative path of the moniker

493	No storage associated with the given object

494	No common prefix with the given monikers

496 - 511 Component Object API Errors

496	CoInitialize has not been called and must be

497	CoInitialize has already been called and cannot be called again (temporary)

498	Can't determine clsid (e.g., extension not in reg.dat)

499	The string form of the clsid is invalid (including ole1 classes)

500	The string form of the iid is invalid

501	Application not found

502	Application cannot be run more than once

503	Some error in the app program file

504	DLL not found

505	Some error in the dll file

506	App written for other version of OS or other OS altogether

507	Object is not registered

508	Object is already registered

509	Handler is not connected to server

510	App was launched, but didn't registered a class factory

512 >>    Undefined Errors