                   
                     This software is provided as-is.
              There are no warranties, expressed or implied.

                     

                              Help Sections:
                       
                       TO BEGIN CLEANING YOUR DRIVE
                       VIEWING, PRINTING & EXITING THE LOG FILE
                       PRINTING & EXITING HELP
                       EXITING TO DOS
                       REGISTERING
                       WARRANTY DISCLAIMER

  
__________________________________________________________________________

TO BEGIN CLEANING YOUR DRIVE:

   1) Insert your cleaning disk into the floppy drive you wish to clean.
   
   2) Using your mouse, click the on screen button that corresponds to the
   floppy drive that you inserted the cleaning disk into. For keyboard
   users, hold down the ALT key and press the letter of the floppy drive.
   A dialog box will appear asking you to confirm that you wish to clean
   the selected drive. At this point you should insert your cleaning disk
   into the appropriate drive. Press ENTER to continue, ESC to cancel. If 
   ENTER was pressed then the PROGRESS WINDOW will open. At this point you
   have 3 options: 
      
      A) You may begin the cleaning operation. To do so using your mouse,
         click the button encaptioned CLEAN, keyboard users should press
         [ALT + C]. This will start the cleaning operation which will run 
         for 30 seconds.
      
      B) You may change the cleaning interval (which is the amount of time
         the cleaning event will run). To do this using your mouse, click
         the UP and DOWN arrows on the SCROLL BAR located near the upper
         right of the PROGRESS WINDOW until you reach the desired value. 
         Keyboard users press the TAB key until you see a cursor on the 
         SCROLL BAR, press the up and down arrow keys until the desired  
         value is set. (Maximum value is 30, minimum value is 1)
         
      C) You may abort the cleaning operation and return to the main menu.
         To do this using your mouse, click on the button encaptioned 
         (QUIT TO MAIN), keyboard users simply press the ESC key.

   You may cancel the cleaning operation at any time. To do 
   so, using your mouse click the on screen button that is encaptioned 
   (Cancel Operation). For keyboard users simply press the ESC key. This 
   action will take you back to the main screen.
   
   3) After the cleaning operation has ended, a window will pop up asking
   for a log entry. Make an entry describing why you are cleaning the 
   drive or press ENTER to have the default (Routine Maintenance) message 
   placed into the LOG.




VIEWING, PRINTING & EXITING THE LOG FILE:

   VIEWING LOG FILE:
      Using your mouse, click on VIEW located near the top of the screen, 
      then click on VIEW LOG, keyboard users press F2. The log window will
      then appear. At this point you can scroll the log with your mouse 
      using the scroll bars located on the right side of the log window, 
      keyboard users use the up/down arrow keys.
   
   PRINTING LOG FILE:
      Using your mouse, click on the PRINT LOG button, keyboard users 
      press [ALT + P] to send the log file to the printer.

   EXITING LOG FILE:
      Using your mouse, click on the EXIT LOG button, keyboard users 
      press [ALT + X] to exit log file and return to main screen.

PRINTING & EXITING HELP:
   
   PRINTING HELP:
      Using your mouse, click on the PRINT HELP button, keyboard users 
      press [ALT + P] to send the help file to the printer.
   
   EXITING HELP:
      Using your mouse, click on the EXIT HELP button, keyboard users 
      press [ALT + X] to exit help and return to main screen.

EXITING TO DOS:
   
   Using your mouse, click on the EXIT menu near the top of the screen. A
   menu will drop down from which you should click on EXIT. Keyboard users
   press F10.  This will exit the program and return you to your operating
   system.





REGISTERING:

      Using your mouse, click on the REGISTER menu near the top of the
   screen. A menu will drop down from which you should click on REGISTER. 
   Keyboard users press F9. The REGISTRATION WINDOW will open. Using the 
   TAB key to move from field to field, fill in the requested information.
   You may CANCEL REGISTRATION at any time by pressing the ESC key. When 
   you are ready to print the registration form, using your mouse, click 
   on the button encaptioned [PRINT REGISTRATION]. Keyboard users press 
   [ALT + P]. This will print out the registration form. Inspect the 
   printed form to insure accurate information. If you encounter any 
   mistakes please make corrections by hand (print legibly). Feel free to 
   write any comments at the bottom of the registration form, all feedback
   is welcome.
   
   Make CHECK or MONEY ORDER payable to Kevin Murphy
   Send registration to: 
                        MURPHYSOFT
                        P.0. Box 5291
                        Fairlawn, Ohio  44334







WARRANTY DISCLAIMER:

   MURPHYSOFT DISCLAIMS ALL WARRANTIES RELATING TO THIS SOFTWARE, WHETHER
   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES
   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH
   WARRANTIES ARE EXPRESSLY  AND SPECIFICALLY DISCLAIMED. NEITHER 
   MURPHYSOFT NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION,
   PRODUCTION, OR DELIVERY OF THIS SOFTWARE SHALL BE LIABLE FOR ANY 
   INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING OUT OF THE USE
   OR INABILITY TO USE SUCH SOFTWARE EVEN IF MURPHYSOFT HAS BEEN ADVISED
   OF THE POSSIBILITY OF SUCH DAMAGES OR CLAIMS. IN NO EVENT SHALL
   MURPHYSOFT'S LIABILITY FOR ANY DAMAGES EVER EXCEED THE PRICE PAID
   FOR THE LICENSE TO USE THE SOFTWARE, REGARDLESS OF THE FORM OF CLAIM.
   THE PERSON USING THE SOFTWARE BEARS ALL RISK AS TO THE QUALITY AND 
   PERFORMANCE OF THE SOFTWARE.
      
      Some states do not allow the exclusion of the limit of liability for
   consequential or incidental damages, so the above limitation may not 
   apply to you.
      This agreement shall be governed by the laws of the State of Ohio 
   and shall inure to the benefit of MurphySoft and any successors, 
   administrators, heirs and assigns. Any action or proceeding brought by 
   either party against the other arising out of or related to this 
   agreement shall be brought only in a STATE or FEDERAL COURT of 
   competent jurisdiction located in Summit County, Ohio. The parties 
   hereby consent to in personam jurisdiction of said courts.

__________________________________________________________________________
