To register OfficeTalk and receive the product enabling keycode, do the following:
Login as a supervisor and enter Supervisor Mode. Choose Register OfficeTalk from the License menu.
The Register OfficeTalk Wizard will appear. Follow the instructions given in this wizard and refer to The Registration Wizard.
On receiving the keycode back from your vendor, you can enter it by selecting Enter Keycode from the License menu in Supervisor mode.
Enter your customer number and keycode into the Keycode field in the Enter Keycode dialog box and press OK.
When you press OK, OfficeTalk will check the validity of the keycode. If the keycode is not correct, OfficeTalk will inform you of this by popping up the following message:
If you get this message, firstly ensure that you have typed in the keycode correctly into the keycode field. The keycode is case sensitive, so ensure that the case of each letter is correct. If no error was made typing in the keycode, check to ensure that you have not changed the spelling of the Workgroup Name since registering OfficeTalk. If you still cannot find any reason why the keycode does not work then contact your OfficeTalk vendor.
If everything is OK then OfficeTalk will display the following message box:
A summary of the registration options is shown. OfficeTalk will now be registered. OfficeTalk will remember your keycode. You should never change the workgroup name or keycode unless you purchase further licenses in the future.