To chamfer two entities using the distance-distance method

1. Do one of the following:
• Choose Modify > Chamfer.
• On the Modify toolbar, click the Chamfer tool ().
• Type chamfer and then press Enter.
2. In the prompt box, choose Chamfer Settings.
3. In the Drawing Settings dialog box, click the Entity Modification tab.
4. Under Chamfer Distances And Angles, click Distance-Distance.
5. Under Chamfer Distances And Angles, specify the first and second chamfer distances.
6. Click OK.
7. Select the first entity.
8. Select the second entity.

Select the first (A) and second (B) entities. The chamfer is drawn, based on the first (C) and second (D) chamfer distances.