![]() | Format menu: Drawing Limits |
![]() | Command line: limits |
ON / OFF /
The drawing limits are 2D points in the World Coordinate System that represent the lower-left and upper-right boundaries. You cannot impose limits in the Z direction.
When turned on, the drawing limits restrict the coordinates you can enter, to within the rectangular area. Drawing limits also determine the area of the drawing that can display grid dots, the area displayed by one of the scale options of the ZOOM command, and the minimum area displayed with a ZOOM All command.
Specifies the lower-left corner for the drawing limits.
Upper right corner <current>: Specify a point or press ENTER
Turns on limits checking. With limits checking on, AutoCAD LT rejects attempts to enter points outside the drawing limits. Because limits checking tests only points that have been entered, portions of objects such as circles can extend outside the limits.
Turns off limits checking but maintains the current values for the next time limits checking is turned on.