|
| Command line: isoplane |
Left / Top / Right / <Toggle>: Enter an option or press ENTER
The isometric plane affects the cursor movement keys only when Snap mode is on and the snap style is Isometric. If the snap style is Isometric, Ortho mode uses the appropriate axis pair even if Snap mode is off. The current isometric plane also determines the orientation of isometric circles drawn by ELLIPSE.
Selects the left-hand plane, defined by the 90-degree and 150-degree axis pair.
Selects the top face of the cube, called the top plane, defined by the 30-degree and 150-degree axis pair.
Selects the right-hand plane, defined by the 90-degree and 30-degree axis pair.
Switches to the next plane in a clockwise fashion from left, to top, to right using the arrow keys.
Related Commands:
DDRMODES sets drawing aids, including the current drawing
plan. SNAP sets the Isometric snap style. You can cycle
through the isometric planes by pressing CTRL+E or F5.
System Variables:
SNAPISOPAIR stores the current isometric plane setting.
