Machines Demo Instructions  
Revised 2.19.99 
-------------------------------------------------------------------------------------------------
CONTENTS  

I.	System Requirements
II.	Quick Start 
III.	Running Machines 
IV.	The Menus 
V.	Game Controls 
VI.	Getting Started   
VII.	Know Your Constructions & Military Personnel  
VIII.	Hints & Tips 
IX.	Playing on Microsoft Gaming Zone
X.	Compatibility Issues & Known Bugs

*We recommend checking our web site for any updates or patches available for the demo. Visit our website at http://www.acclaim.net   

**If you want to play the Machines demo on the Microsoft Gaming Zone you must run the game at least once in single player mode. This ensures the game is setup properly with DirectPlay in the system registry.    

--------------------------------------------------------------------------------------------------
Introduction 
Machines is a real-time strategy game where you control a race of Machines.  

The Story
Overcrowding on Earth forces a new, worldwide push to colonize nearby planets. Light speed engines are developed but prove to be fatal to any cell-based organism attempting the journey. Instead, modified industrial robots were sent into space. These robots were sent to planets in Pods and were programmed to terraform the planet, making it suitable for human life. Pods (the controller) contain a super computer, some colonization robots and a planetary core extractor to provide a steady supply of minerals. The controllers were successful in their tasks but the humans were not; they never arrived. Years passed and one race of machines on the planet Eden 4 suffered severe damage due to electrical storms. Most of the controller’s memory was damaged but the controller continued to function. The damaged machines continued to build until they exhausted all of the resources on Eden 4. The planet surface is now littered with steel and the controller decides that to further colonize, it must seed another planet.  The planet they reach already is home to another race of machines, and a fierce battle for the planet’s resources begins.

Demo Features 
This demo will give you a taste of the firepower and depth promised in the final version. While your choice of planets, researchable machines, and weapons are restricted we think there's enough included to give you an idea of what to expect in the final Machines. 

This demo features:
•	2 campaign levels (single player missions)
•	1 skirmish (1 player vs. CPU opponents)
•	1 multiplayer level (up to 4 players over LAN or Internet)

Note: Although the game will allow 4 players over the Internet, we recommend you only play a 2-player game. Network play (LAN) should run fine with 4 players. We are working hard to insure improved Internet performance for the final release (see compatibility issues for more details). 
What you are missing
To keep the demo size reasonable, we had to remove voice-overs, great music, ambient sounds, FMV sequences and in-game cut scenes. The full version will include these features plus:
•	50 unique Machines to construct (including flying machines)
•	25 different weapons to research
•	18 different constructions
•	7 different sentries (ground to air, ground to ground gun turrets)
•	20 Planets to explore (with Day and Night cycles)
•	and more!!! 

Check out our website at http://www.acclaim.net for a list of features found in the full version of Machines. There you will find any current news, updates or fixes that are available.  

I. ------------------------------------------------------------------------------------------------
SYSTEM REQUIREMENTS: 

• Windows 95 or 98 w/Direct X6.1 installed
• Pentium 200Mhz PC or better
• Requires Microsoft Direct3D graphics accelerator card or 100% compatible 
• 32 MB RAM, 4 X CD-ROM drive
• 85 MB free hard disk space 
• Support for Aureal A3D and Microsoft DirectSound compatible soundcards

Note: It is recommended that after the game installs, make sure your hard drive has at least 100MB of free space for Windows 95/98 to operate (swap file). 

DirectX 6.0:The game runs fine if you have DirectX 6.0 installed. Updating to DirectX 6.1 fixes certain multiplayer issues, so if you plan to play online this update is required.    

II. ---------------------------------------------------------------------------------------------- 
QUICK START  
•	Choose Single Player from the main menu then start the training levels  
•	Below is a Quick key guide (see Game Controls for a detailed list) 

Keyboard  (keypad)				 Mouse 			
 0  -Free cam  (ground camera)			Left click    -selects unit or structures 
 1  -1st person view  (embodied machine)	Left hold & move -drag selection box
 2  -Zenith view (overhead view)			Right click  -cancels selection
+/-  Zoom in/out or up/down			Right hold & move -rotates camera (zenith view) 
						Right double click - exits 1st person view

•	Moving the mouse to the edges of the screen will cause the camera to move in that direction. The camera will either pan or rotate depending on what view you are in. The arrow keys will also move the camera in the same manor. 
•	1st Person perspective requires the use of the arrow keys to move. Moving the mouse will help you aim and the left mouse button will fire your weapon. Double right click or ESC key will exit the Machine and return to the zenith view..  
•	Described above are the basics; it's recommended that you familiarize yourself with some of the other “Hot Keys” available in the game (see Game Controls). 

III. ----------------------------------------------------------------------------------------------
RUNNING MACHINES
Press the Start button, go to Programs and look for Acclaim Entertainment, Machines Demo. The game will automatically choose a secondary display device if found (usually 3DFX) or the primary if no secondary is detected. 
	
NOTE: If you have multiple 3D accelerators installed in your PC, go to the options menu (in- game) to manually choose which 3D accelerator and driver to use. 

IV. ----------------------------------------------------------------------------------------------
THE MENUS

Main Menu	
Campaign 		Play an entire roster of linked scenarios. (Demo includes 2 levels)
Multiplayer		Begin/join a Multiplayer Game
Skirmish 		A single battle vs. the computer. (Demo includes 1 level)
Options			Set game options
Exit 			Exits game and return to Windows desktop 

Options
3D Sound			Enable/Disable 3D sound support
Menu Transitions		Turn animated menu transitions on or off. (N/A in demo)
*Screen Resolution Lock	Maintain current screen resolution when returning to menus.
2D Selection Box	Some video card drivers have difficulty displaying 3D selection boxes. Use this option to display flat (2D) selection boxes. 
Reverse Up/Down Keys		Changes the direction of Up and Down keys.
Reverse F.P. Mouse		Reverse 1st Person mouse control (Down will be down).

Music Volume			Adjust the music volume.
Sound Volume			Adjust the sound effects volume.
Resolution			Set screen resolution.
Display Driver	Chose a 3D accelerator card, or use Automatic to have the computer automatically detect the proper card. 
3D Driver			Choose a driver for your preferred 3D accelerator card.
Optimizations	Click on a box to check (make the item active) or uncheck (disable the item). Unchecking items should make the game run faster. 
*It is recommended to keep this option “on” which is the default setting.  
		
CAMPAIGN
When you select Campaign, you’re in for a grueling test of skills against varying scenarios, each with certain mission goals, which must be successfully met to claim victory. The demo has only 2 scenarios to choose from. 

At the top left is the star systems window, which lists the regions of the universe/planets where the various available campaigns occur, including training mode. Below this is the planet window, which lists where the selected campaign takes place. The scenarios window lets you select the next available scenario. To the right is a scrollable text window which gives mission objectives for the selected campaign. Once you’ve made your selections and read the briefing, click OK to move to the Mission Briefing screen. This screen provides a detailed explanation of the specific goals of the current mission.

MULTIPLAYER  
When you select multiplayer from the main menu you go to a new screen. At this point you must decide on which connection method to use:

IPX Connection for Direct Play  Play on a LAN (network) 
TCP/IP Connection for Direct Play Play over the Internet
Modem Connection for Direct Play  Modem to modem play 
Serial Connection for Direct Play    Serial cable (not tested for demo)

Current Games List Menu
Once you've selected your connection method, will come to another screen! From here you will decide if you are going to create a game (host) or join another game. The window on the left shows all the games (session/game names) that are waiting for someone to join. 

Join
If you want to join, highlight the name of the game then click join. If you are looking for a specific name, or you don’t see any game names are all, click on the show games button to refresh the list. Note: Depending on the connection method you choose (IPX, TCP, etc.), you may need to press the Show Games button each time you come to this screen in order to see the game names. If you are imputing an IP number directly, then you must press Show Games to search that host address. When you see the game you want to join you will then be taken to another screen called the lobby (See lobby below). When you enter the lobby area you can select your color, chat with others and see the current game options. 

Note: After you made these choices you must click the I’m Ready button on the bottom of the lobby screen in order for the host to actually be able to start the game.  

Create (being the host)
Being the host means that you’re inviting people to join you in a game. As host, you must enter a name of your game and setup the game parameters for the style game you wish to play. Enter the name of your game where it says [New Game Name] located in the current games window before you click the create button. When you enter a game name and click the create button you will be taken to a new menu called the lobby (see below). 

Note: When you are in the lobby, keep in mind that the Host will not be allowed to start the game (the start button will be grayed out) until all of the joining players have clicked the I’m Ready Button. 

Lobby
Whether you Join or Create a game you will come a new screen called the lobby. It doesn't say anywhere on the screen that it's the lobby, it's just a name to describe the area and its function. You will know you are in the lobby when you see an I’m Ready button on the bottom of the screen. The lobby screen is where you wait for other players to join in. When players join your game their names will appear on top of the screen. When someone appears you can start typing to chat with him or her while you wait for other players. Messages from other players will appear in the large, main window. To the right of their name will be a small bar graph and a large solid colored bar. 

Ping meter (small bar graph)
When someone has joined your game a small bar graph will appear next to their name which represents their Ping to you. In other words, the small bar graph represents how good of a connection their PC has to yours. Green represents a good connection, while yellow is OK and red is generally bad. Due to the constant fluctuation of the Internet this bar may constantly change from green, to yellow, then maybe back to green again every 5-10 seconds. If the red bars appear for a few seconds then goes back to green, not to worry. But if you are constantly red then you may not want to join this particular game because it will result in poor gameplay performance due to latency.  

Color selection (solid color bar)
The larger color bar represents what team color (machines race) you are and what color the other players have chosen. You can change your color by clicking on the bar and sliding the mouse to the appropriate color. There are 4 team colors available but you will notice 5 colors to choose form. There is the Red, Green, Blue, Yellow teams plus a Gray color to choose from. Since the game does not allow two people to be the same color, you can select the Gray color to allow the other players to switch to the colors they want. Note: If you start a game with someone using gray, the game will automatically choose another.  

Selecting CPU opponents    
When you are the Host you will notice the word OPEN next to the slots where players names would be. When you highlight this area a drop down menu arrow will appear next to the color bar. Pulling down this menu will allow you to either close the slot (not allow anyone to join) or you can select the CPU to play as that team color.   

*Settings Menu (same as Skirmish Menu)
All players will have the ability to click on the Settings button while in the lobby, which will take you to a new menu. Only the Host has the ability to changes the options presented in this menu.  To the left of your screen are selectable elements such as Map Size (choose Small, Medium or Large maps), Terrain Type and Scenario. Please note you are limited to desert scenario in the demo. The Map size selected determines what terrain is available. To the right is the settings area, from here and you'll make important decisions about these things:
Fog of War: A graphic effect that covers unexplored territory in darkness. As you and
your opponent explore the current map, the Fog cover is lifted.
Resources:  Set the number of resource locations  
Starting Resources: The number of Building Material Units you start with. Settings include Default and range from 0 up to 10,000 units.
Start Position: Select a Random (CPU generated) or Fixed (each color always starts in the same place) starting position.
Victory Condition: Determine the conditions for victory. Settings include Default (total annihilation, completely destroy the enemy) and Destroy Pod (destroy the enemy pod to win). 
Starting Tech Level: Default, Low, Medium or High settings. The higher the setting, the more sophisticated each side’s available technology is at the beginning of the game.
Player Color: Choose to play as Red, Green, Blue or Yellow. (Gray is a holding area)
Number of Players: Choose from 2, 3 or 4 players. Team play will be available in the full version.
Mission Objectives: The objectives of the current game appear in a scrollable window at the lower left of your screen. You can access this window during a game by pressing the ESC key.

*When you get to the settings menu by choosing multiplayer, pressing OK will return you to the Lobby so everyone else can see the game parameters you selected. When you get to this screen by choosing skirmish from the main menu, pressing OK will start the game. 

SKIRMISH 
Skirmish is very similar to how you would set up and play a multiplayer game, except that all of your opponents are CPU controlled. When choosing this option from the main menu, it will take you to the Settings Menu, which is described above. Once you selected the game parameters, choose OK for the game to start. 

V. -----------------------------------------------------------------------------------------------
GAME CONTROLS
Machines uses a similar style of interface to other point and click games you may have played in the past. You can select individual machines and buildings with a left click on your mouse cursor. To select larger groups, drag a selection box around a number of your machines by holding down the left mouse button (release when the desired items are in the selection box). Right click on your mouse to deselect any currently selected units.

Using the Console 
The console is displayed on the left of your screen. This panel is where you control your machines and where vital information about your situation is displayed. It is the heart of Machines. Note that you can click on the tab at the right edge of the panel to make the panel withdraw or display, giving you access to a greater area of the play screen as needed. Clicking on the tab again will restore the console display.

Corral
All currently selected machines are shown in a holding area known as the corral, which resides under the map area on the console. When you select a friendly unit (either single or multiple machines or construction) an iconic representation of each one will appear in the corral area. The corral may be scrolled up or down to access the units when there are too many for all of them to fit in the window at once. Icons in the corral can have a number of functions performed on them:

Left click 	-Selects this unit and removes any others from the corral
Alt+left click 	-Centers main window on the selected unit (does not remove others)
Ctrl+left click	-Removes the unit in question from the corral

*Command Menu (on the console)
When you select a machine, a command menu will appear on the console listing the actions specific to the machine highlighted. Selecting a constructor (Dozer), the command menu will show the actions available to this machine like construct, deconstruct or capture. By selecting an aggressor (fighting) machine the command menu will display actions like attack, patrol or form squad. These actions can be performed by selecting a machine first, then clicking the command or by using the keyboard shortcuts (see hotkeys below). Some commands do not require the player to click on the console or to use a hotkey, this is described as a smart cursor. 

* Complete the training levels to get a better understanding of all the commands for each type of unit

Smart Cursor 
While playing the game the Cursor changes depending on what action you are requesting or performing. This is faster and easier than clicking on the machine then clicking on the control panel for every action.

Selection cursor- when placed over an item the cursor will change to a small icon representing the desired task to be performed. Usually the most common task for that machine is what the icon will be. A 3D highlight will appear around the selected item, and a menu of commands will appear in the control panel at the left of the screen. You can then select the command you wish the selected item to carry out. 

Target cursor- when placed over an enemy target the cursor will change to a red crosshair. When you click, the machine you have tasked will attack (and hopefully destroy!) that target. 

Patrol cursor- when you choose to patrol the cursor will change to represent this action. The selected machine will patrol between two or more points. 

Map Area
At the top left of the console is the area map. By default, your forces appear in red, while opposing forces appear in blue. Your current position/ orientation is shown by a yellow dot with a white view angle. Clicking on the M tab will toggle through what the map area displays: enemy locations, building locations or mineral deposit locations. You can click on the T to toggle the terrain display ON or OFF.

You can use the map area to task machines as you would in the main screen. When you click on a dot, that item is selected and information about it will appear at the bottom of your screen. If the item is one you can control (machine, building, etc.) you can then use the command menu on the console to task a constructor or order an attack when you see the enemy (shown by dots) moving towards your position.

*Note: In certain scenarios, the map will not be visible until certain constructions are built, and the map window will instead be filled with the military crest of your race. The map will become active upon completion of the communication constructions.

BMU indicator: Your current number of Building Material Units appears at the top right of the map area, in this form: xxx/xxx, where the first numbers indicate your current BMUs and the second series displays your total (POD and Smelter) capacity. 

Navigator Icons
Three icons appear to the right of the map area. These are Navigator icons. Note that each has a number, indicating at a glance how many items in each category you have. Clicking on any of these icons will bring up the command menu for it (where applicable) and display the various units you have by category. 

Machine Navigator Icon
Click on this icon to view your current machines. Currently building/ available machines appear in color. Machines that are not yet available appear grayed out. 

Construction Navigator Icon
Click on this icon to view your current buildings. You can issue commands to your buildings from remote locations (meaning the construction doesn’t have to be in view to select it). 

Squad Navigator Icon		
Click on this icon to view your current squad groupings. A menu of squads (numbered 1-9) will appear in the bottom of the control panel. If you have formed any squads, they will appear in the order in which you formed them. You cannot form more than 9 squads at any given time. Squads can be formed for patrol, attack or recreational (just kidding) purposes. To form squads, click on the Form Squad command, then click on up to X units to include in the squad.

CAMERA VIEWS / SELECTION
There are 3 different ways to view Machines, with slightly different controls for each. The
camera can be selected using the following keys:

•	Keypad 0		Free Cam (ground level)
•	Keypad 2		Zenith View (overhead)
•	Keypad 1		1st person (embodied machine)

Free Ground Camera (Keypad 0)
This camera is not attached to any entity. Its height is restricted to between 1 and 10 metres above the ground. There is no collision detection with machines and ILFs. It can be used to fly into friendly constructions by entering through the doors, which open automatically on its approach, and close behind it. 

Flight controls:
•	Up/down arrow		Translate forwards/backwards
•	Left/right arrow		Turn left/right
•	Shift+up/down arrow	Look up/down
•	Pad +/-			Translate up/down
•	Page Up/Page down	Translate up/down
•	Delete/End			Translate (strafe) left/right

Zenith View (Keypad 2)
The line of sight is looking down on the world at an angle. In addition to the following, the camera will scroll north, south, west or east if the cursor is moved to the edge of the screen.

Flight controls:
•	Up/down arrow		Translate north/south
•	Left/right arrow		Translate west/east
•	Shift+left/right arrow		Spin left/right about line of sight
•	Pad +/-			Zoom out/in
•	Page Up/Page Down	Zoom out/in

1St Person View (Keypad 1)
This view lets you experience the intensity of battle from the field level. It also offers additional levels of combat control, which can give you the upper hand when used strategically. Once a machine is selected, you can switch to this view by clicking on the 1st Person View icon located on the console or by pressing keypad 1. 

•	1st Person perspective requires the use of the arrow keys to move. 
•	Use the mouse to aim and the left mouse button will fire your weapon. 
•	Holding right mouse button will allow upper torso rotation (on some machines) 
•	Double right click or ESC will exit the Machine 

Note: In the first person view, a radar screen appears at the bottom right of the screen. By default, enemies appear in blue and your forces appear in red.

HOTKEY LIST (some of these keys will have no effect in the demo)
Commands				Action
Form a squadron				Ctrl + 0-9
Select a squadron				0-9
Move 					M
Attack 					A
Construct 				C
Locate Minerals 				L
Patrol 					P
Deploy 					E
Pick up 					K
Transport 				T
Self-destruct 				Ctrl+Shift+Backspace 
Drop mine 				Shift + M
Refill land mines				F
Heal 					H
Deconstruct 				D
Recycle 					Q
Stop (will also terminate self-destruct)	S
Stand ground				W
Repair 					R
Capture 					U
Machine Initiative Setting			TAB
Assemble At 				L
Scavenge				Y
Camouflage (multiplayer only)		O
Treachery				J

Misc
To menus from in game						ESC or F10
Exit 1st person view						ESC or Dbl. right click
Hide control panel						Alt + Left Arrow
Show control panel						Alt + Right Arrow
Screen shot							Ctrl+Shift+F12
Cancel Research							Select icon + Backspace
Cancel Production						Select icon + Backspace
Alternative Intelligent Cursor ( next best cursor )			Alt
Deselect all machines/constructions in corral				Tap Right Mouse Button
Position Camera via Map						Right Mouse Button Click
Task Machine/Construction in 3D window or via Map		Left Mouse Button Click
Position camera at starting position					Shift+H
Position camera at last position (before cycling saved cameras)	Ctrl+Shift+H

Navigator
Select all constructions						Shift+S
Select all constructions keeping what’s already selected in corral	Ctrl+Shift + S
View next construction						Alt + S
Select all machines						Shift +A
Select all machines keeping what’s already selected in corral		Ctrl + Shift + A
View next machine						Alt + A

Select on-screen machines						Shift+ Z
Select on-screen machines	keeping what’s already selected in corral	Ctrl+Shift + Z
Select on-screen constructions 					Shift+X
Select on-screen constructions keeping what’s already selected in corralCtrl+Shift + X

Multiplayer Games
Send chat message to specific opponent 			F1, F2, F3
(Press repeatedly to cycle through default set of chat messages)
Send chat message to all opponents				F4
(Press repeatedly to cycle through default set of chat messages)

Camera Position Saving
Save camera position						Ctrl + F5-F8
Restore saved camera position					F5-F8

Note: All camera saves start by storing the initial position of the camera. 
If you get lost in Fog of War, press F5-F8 to jump back to unfogged area.

Changing Camera
Ground Camera							Numpad 0
Zenith Camera							Numpad 2
First Person							Numpad 1

Ground Camera motion
Forward								Up Arrow
Backward							Down Arrow
Rotate Right							Right Arrow
Rotate Left							Left Arrow
Strafe Right							Shift+Right Arrow or End
Strafe Left							Shift+Left Arrow or Delete
Look Up								Shift+Up Arrow
Look Down							Shift+Down Arrow
Raise Camera							Page Up
Lower Camera							Page Down
Slow camera motion (used in conjunction with above)		Ctrl 

Alternative way to move camera using mouse. Press right mouse button over 3D world and move the mouse pointer around.

Zenith Camera motion
Forward								Up Arrow
Backward							Down Arrow
Rotate Right							Shift+Right Arrow
Rotate Left							Shift+Left Arrow
Right								Right Arrow
Left								Left Arrow
Zoom in								Page Down
Zoom out							Page Up
Slow camera motion (used in conjunction with above)		Ctrl 

Alternative way to move camera using mouse. Press right mouse button over 3D world and move the mouse pointer around.

First Person
Fire								Space
Weapon Select							TAB
Exit Machine							ESC 
Forward								Up Arrow
Backward							Down Arrow
Look Up								Shift+Up Arrow
Look Down							Shift+Down Arrow
Turn Left							Left Arrow
Turn Right							Right Arrow
Turn Head Left							Shift+L Arrow or hold right mouse 
Turn Head Right							Shift+R Arrow or hold right mouse
Center Head							Numpad 5 or release right mouse
Night vision 							N
Menus								F10
Slow Turn Speed							Ctrl

VI. -----------------------------------------------------------------------------------------------
 GETTING STARTED 

Tutorial 
A good place to start is to attempt the in-game training levels. These levels help you jump into play and learn basic menu items, commands and the general concepts behind Machines. Once you’re familiar with how Machines works, you’ll be ready to take on the hoards of enemy machines. To start the training levels select Single Player, then choose training camp. Training levels are broken down into basic and advanced levels, stepping you through the basics.   

5 Steps to Collecting Resources
The colony you are in control of (the RED machines and constructions) uses Building Material Units ( BMUs ) to build all of its machines and buildings and to research new levels of technology. The total BMUs you have available is indicated at the top right of the map. BMUs can only be obtained by mining and smelting minerals. To accomplish this, you will need:
· A Mine built upon a confirmed mineral deposit site
· A Smelter (storage facility) to convert the raw minerals into BMUs 
· A Transporter machine to ferry minerals from the Mine to the Smelter. (Your POD can also act as a smelter if you don’t have one built or it was destroyed.) 

Step 1:Use a Geo Locator to Find Minerals
You must first use a Geo-Locator to find the hidden mineral sites. Select a Locator and then click somewhere in the world (you will notice that locating is the default action for Geo-Locators).  When a mineral site is within the Locator's scanner range, the Locator will move to the mineral site and drop a spinning holographic marker, indicating that a mineral deposit has been found.

Step 2 :Build a Mine
You then need to construct a Mine over or around the mineral deposit. To do this, select a Constructor and task it with building a Mine. Doing this will allow you to place a model of the Mine over a mineral indicator. (The Mine will flash if moved to a location where it cannot be placed.) You can change the orientation of the Mine by holding down the Ctrl key and moving the mouse. When you have placed the Mine over the mineral indicator (by left clicking on the mouse), the Mine will appear as a glowing green translucent version of its final built appearance. The Constructor will then move to the wireframe and begin construction.

Step 3:Build a Smelter (storage)
You must now construct a Smelter to convert and store minerals extracted by your Mine. Your POD can also be used as Smelter, but it cannot store as many BMUs.  Use a Constructor to build a Smelter using the same procedure as was used when constructing the Mine. Please note that a Smelter has to be built 50 meters from any Mine or POD. (The Smelter will flash when moved to a location where it cannot be placed.) A Mine has a finite storage capacity which cannot be exceeded. When capacity is reached, the Mine will simply stop extracting any more minerals until some or all minerals are removed. Minerals can only be removed by a Transporter. A Transporter is a machine that must be built to transport mineral ore from Mines to Smelters. 

Step 4:Build a Transporter
The Transporter is built in the Civilian Factory, so you must build a Civilian Factory first ( if you don't already have one ). When this is complete, click on it and you will see the 'Build' menu for the Factory appear in the menu to the right. Select a Transporter icon to begin building it. There are 5 different classes of Transporter, and you will normally start the game with only one (or perhaps two) of the most basic types (Ox and Mule) available to build.

To obtain a continuous flow of BMUs into your base, you must set up Transporter routs.  When the Transporter appears at the front of your factory, you can order it to move the ore from the Mine or to the Smelter by using the 'Transport' command. Click on the Transporter and click on the 'Transport' icon. The message at the bottom of the screen will tell you to select the Mine to be picked up from, and select the Smelter at which to drop off. This sets up a 'permanent' transport route which the Transporter will continue travelling back and forth along automatically (unless or until interrupted.) 

Step 5:You’ re Ready!
With this knowledge you’re ready to put your base to the test. You will notice a lot of opportunities to do other things while you are doing these steps. The type of constructions you decide to do will change with the different levels and with experience. 

Warfare (limited in the demo)
To protect your colony from the enemy races and attack them, you can construct Military Factories - to produce Aggressors, Administrators, Spies, APCs. Selecting the factory will show a list of machines currently available to build. Constructors can also build static defences (turrets, missile emplacements). These are built in the same way as other constructions. They will help defend your base by firing upon enemy units that move within their scanner range. 

Research 
Research is the key to success in Machines. Some low level machines will be immediately available to build in your factories but to be able to build higher level machines you must build a Military Research Lab and then build and place at least one Technician inside. The three levels of ‘Technician’ the first is the eponymous Technician; the second is the Technician Engineer; the third is the Technician Brainbox. Each advances the research in technology. 

Note: There is only one level of technician available in the demo.

Technicians
All Technicians (except those already available at the start of a scenario) are built in  ‘Civilian Factories’. To move a Technician to a friendly lab, select the Technician, move the cursor over the Lab (it should turn into an "enter building" cursor) and click the left mouse button. You can build up an itinerary of research in a Lab without any Technicians being present as long as at least one friendly Technician exists somewhere in the world. But remember: no research will take place until a Technician is inside the Lab in question. You will be given a verbal message reminding you of this fact if you use the itinerary approach.. 

Clicking on a lab that houses a Technician will reveal all the research items currently available to be research. Passing the mouse cursor over any of these icons will reveal a text prompt that details the cost in BMUs of undertaking this research. Clicking on one of these icons will start the research into that technology. It will also cause a duplicate of that icon to appear at the bottom of the panel. ‘Clicking’ on further icons will result in these items being ‘queued’ at the bottom of the panel along with the item currently being researched. When the current research has finished the next item in the cue will start being researched. It is possible to edit the research queue by ‘clicking’ on one of the icons in the queue and then pressing the ‘delete’ / ‘backspace’ key. 
 
Once all of the items available for research have been researched no further icons will appear until the next level of Technician has been built.  Although the next level of Technician doesn’t have to be moved inside a lab for the new technology to be available for research, the presence of this new unit will greatly speed up research. Once items have been researched their icon disappears from the research lab and will appear in the appropriate factory ready for production. If the appropriate factory has yet to be built then the newly researched icon will not appear anywhere in the game until it has. It is important to remember that the once a higher level Technician has been manufactured, any lower level Technician can research the newly available research items, too.

Once research has been completed, you should be able to build new machines or activate new weapons. There may be other dependencies, however.  Certain machines can only be built in certain types of factory, so unless you have constructed such a factory, it might appear that the research has not given you any new construction options. In this case, you should find that building the next type of military or civilian factory will allow you to build the machine you have researched. The research tree and its interdependencies with factory types has been carefully designed so that no machine can be researched far in advance of the appropriate factory to build it becoming available. Also, no scenario lets you research a technology that can’t be realised in a viable factory, so there is little danger of pursuing "useless" research. What research is most useful to you will depend on the strategies you tend to employ and your personal preferences in machine types, given experience with their varying strengths and weaknesses.

VII. -----------------------------------------------------------------------------------------------
KNOW YOUR CONSTRUCTIONS & MILITARY PERSONNEL 

Seeding POD
The seeding POD (also known as the Controller) is the master computer controlling your race of
machines. You are the Controller when you play the game. Depending on the scenario, generally
you must protect the POD at all costs or your game will be over.

Mines
The mining facility allows the subterranean minerals to be brought to the surface. All mines have two important attributes that need to be considered when choosing which mine to build; namely extraction rate and storage capacity. The only Mine available in the demo has an extraction rate of 60 BMUs per minute and can store 150 BMUs. The extraction rate determines how quickly the mine will deliver minerals to the surface ready for collection. The storage capacity indicates how many minerals can be stored in the mine. It is important to be aware of this limit as when the mine runs out of storage space it will stop mining and not resume again until some or all of the minerals currently stored are removed by Transporters.

Smelters
When minerals are transported from mines they need to be smelted to turn them in to useful BMUs (Building Material Units). This operation takes place inside the smelters. Once the transporters have delivered the minerals they are instantaneously converted. Two Smelters are available in the demo and both have a greater capacity for storage than the Pod. It can also be built in closer proximity to the mines, making transportation time shorter. 

The Seeding Pod as a Smelter
The colony seeding Pod acts as the first smelter and has a storage capacity of 500 BMU’s. The pod as a smelter therefore acts as a fail-safe should all other smelters be destroyed.

Military & Civilian labs
Labs are required in order to advance from the low-level machines that your factories start with. In order to start research new technology in a lab you have at least 1 technician placed inside. Please note that Military and Civilian labs are separate constructions. You can only research Military units and weapons in the Military labs, and Civilian units in the Civilian labs. See the section devoted to researching for more information

Military Factory
The military factory builds the aggressor machines that make up your army. Level one military factories are capable of producing low-level machines without any research. When your lab finishes researching a new machine, the new machines (icon) should appear when you select the factory.  

Civilian Factory
The civilian factory builds all of your non-fighting machines like transports, technicians, geo-locators and constructors (dozers). This factory operates the same way as the military factory where you need a civilian lab to advance the technology for the factory to build.  

Military Personnel (aggressors)

Grunts
These should be considered the most basic infantry units in your army: cheap, low-tech, but undeniably effective if utilised correctly. Of necessity the primary offensive units at low tech levels, grunts can still provide an offensive threat in larger numbers later in the game, and can cause disruption through the employment of flanking and rearguard attacks against the enemy even when your main assault comes from more heavily-armed machines.

Subtypes:
Scout - with Bolter
The lightly-armoured, wheeled scouts are used primarily for armed reconnaissance. Protection against enemy assaults is negligible - scouts can reasonably be treated as disposable in combat situations. The medium-range Bolter on this model can shoot some opponents before they are able to approach and use their own weapons, but in close-quarters combat, this machine can be destroyed with ease.

Scout - with Disruptor
At very close range, this is most effective of the scout types. The Disruptor can do considerable damage to targets, and groups of Disruptor scouts can often be employed to great effect by rapidly closing with a more heavily armoured opponent and taking it down with a concerted attack.

Grunt - with Bolter
The first of the "standard" grunt models, which are more heavily-armoured than the scouts, but not as fast across open ground due to their employment of caterpillar tracks rather than wheels. Their development provides a significant advance in mobile offensive capability, with the fully rotatable upper torso whose omission is a clear weakness of the more basic scout designs. Although they cannot reach an enemy as swiftly as a scout, they can absorb more combat damage, and can cope much more easily with a mobile target due to the rotatable torso tracking system.

Grunt - with Disruptor
Although unable to spring upon opponents as fast as Disruptor scouts, packs of Disruptor grunts can achieve a more even combat distribution when surrounding their targets due to the potential for oblique approaches that is facilitated by the rotatable torso design.

Flamer - with napalm
The napalm weapon on this grunt variant does not offer quite the outright damage potential for damage of a Disruptor, but its more conventional form of attack has one principle advantage - a greater proportion of the damage inflicted will be done directly to the chassis and internals of the target rather than be absorbed by its armour. For this reason, machines who believe themselves to be well-protected against attack due to high armour levels can be destroyed with surprising speed by a Flamer if their constitution is already low.

Warrior - with twin heavy Bolters
Warriors are the slowest grunt units, but the most heavily armed and armoured, sporting twin-mounted heavy Bolters that can pulverise weaker units at close range. Even when superseded, warriors are often deployed to good effect at the head of a platoon to absorb enemy fire while more vulnerable units deploy long-range ordnance in safety from behind their protective front.

Reapers
The reaper design was developed to provide a swift and versatile sentient platform for the deployment of higher-technology weaponry. A quadruped with rotatable upper torso and either single or twin weapon mountings, the reaper's offensive capabilities are offset to some extent by its structural frailties. For this reason, reapers are often employed to best effect in platoons with other, more heavily-armoured units who are able to take the brunt of the enemy fire.

Subtypes:
Reaper - with Single Auto Cannon
This Reaper variation is armed with a powerful Auto Cannon. The armor piercing sabot rounds it fires are deadly at close range and this unit is therefore most effective when it is able to close with its target.

Reaper - with Single Plasma Rifle
In contrast to its auto cannon counterpart, this reaper with its Single Plasma Rifle does not offer the same outright potential for damage, but has the advantage of being effective at a much greater distance. This makes it the de facto weapon of choice when it is necessary to inflict damage without sustaining it, especially against static targets.

Wraith Reaper - with Twin Auto Cannons 
An advancement on the original Reaper, the Wraith unit carries twin Auto Cannons, thus doubling the damage inflicted.

Wraith Reaper - with Twin Plasma Rifles
This design of Reaper uses twin Plasma Rifles, thereby increasing its effective offensive potential by 100%.

Enforcer
The Enforcer is the next generation Warrior Class. This tracked unit boasts superior armor and fire power than its forerunner and also uses the rotatable torso tracking system. The increase in armor mass has resulted in a relatively slow turn of speed but in one-on-one combat the Enforcer should bring down any unit previously developed.

Subtypes:
Enforcer - with Twin Heavy Bolters
The Heavy Bolters sported by the Enforcer will inflict 33% more damage than the Bolters wielded by the Warrior. 

Enforcer - with Twin Heavy Plasma Cannons
The first unit to employ Plasma Cannons, which trade the range of the plasma rifles for a fearsome close-range offensive punch, and give this Enforcer a slight edge in firepower over the heavy Bolter version.  

Knights
The Knight class aggressor sees the introduction of hover technology. Not only does this make the Knight a frighteningly mobile predator, it also allows previously inaccessible terrain to be traversed. Hover technology will carry a unit across water and lava fields (but not deep fissures or crevasses). The protection offered by the chassis of the Knight is a slight improvement over that of the Enforcer. 

VIII. -----------------------------------------------------------------------------------------------
HINTS & TIPS

Training levels
Do not destroy or self-destruct any buildings or machines while in the training levels or you will not be able to complete them. You will have to quit the mission manually by press the ESC key.

Scenario 1 Make Contact
Remember to select the commandant to bring him with you when you go your base. If you leave him behind the game will not continue. 

Scenario 2 Establish Military Base    
The enemy’s base has a surprise for you when you arrive. Be sure you have the firepower to handle it. 

IX. ------------------------------------------------------------------------------------------------
PLAYING ON MICROSOFT GAMING ZONE
By the time you read this there should be a server setup specifically for Machines at the Microsoft Gaming Zone.The Zone if a free multiplayer gaming service design for people to meet and play their favorite multiplayer games. If you have never played at the Zone before please following this link below which will give you instruction on how to sign up and start playing. 

Machines Demo may be run over the Internet via the MSN Gaming Zone (http://www.zone.com)

Note: Machines Demo supports DirectPlay Lobbying, so follow the online instructions to run games from the ZoneLan - DirectPlay area if Machines is not listed on the games list. 

**If you want to play the Machines demo on the Microsoft Gaming Zone you must run the game at least once in single player mode. This ensures the game is setup properly with DirectPlay in the system registry.

X. ------------------------------------------------------------------------------------------------
COMPATABILITY ISSUES & KNOWN BUGS
The following is a list of known compatibility issues found during the testing phase of this demo. We apologize for the inconvenience and are working hard on correcting them in time for the final release. You can visit our website at http://www.acclaim.net 

Multiplayer issues (Internet)
You may experience problems playing a 3 or 4 player Internet game. There are a few reasons for this. The code has not been fully optimized so 3 - 4 player games may have trouble keeping in sync. Also, there is no population limit in the game so constructing too many machines (30+ squads) will degrade performance and players might be dropped as a result. We recommend you play a 2-player game (with no CPU opponents) with the demo version. We are working hard to insure improved performance for the final release. 

Crash in Multiplayer
If you exit a building during a multiplayer game in 1st person the game may crash. To work around this, it’s recommended that you leave 1st person view then instruct the machine to exit the building.   

Machines not available in the demo
You will be able to research the ranger locator but the capability to build it is not available in the demo. 

Constructions that can be build but not used
You are allowed to build up a Heavy Assault Factory, Advanced Civilian Factory, Civilian Research Academy and Military Research Academy to get an idea of what to expect in the full version but they are not functional in the demo. 

Sentinels that can be build but not used.
You are allowed to build air sentinels but they will not function in the demo. Buy the full retail version to see how cool they are. 

Training levels
Do not destroy or self-destruct any buildings or machines while in the training levels or you will not be able to complete them. You will have to quit the mission manually by press the ESC key.

Squad icons
When you create a squad an icon may appear as static next to the number assigned to it. The squad will function normally.  

Compatibility issues with certain drivers: 

3D Selection boxes with Voodoo2 & Other 3D Cards
-With some 3D drivers, selection boxes not fully surrounding the construction or machines in all views. Other drivers will display the selection box in Black when it should be color-coded (green=no damage, yellow=damaged, red=almost dead). 

For Voodoo 2 owners using the latest 3DFX reference drivers solves the problem. We do NOT recommend using them unless you are an advanced user or have them installed already. We recommend staying with the latest manufacture’s drivers.           

If you have the latest drivers from your manufacture and you still cannot see the proper selection boxes try setting the boxes to display in 2D, this option is found in the main menu under options. 

You may experience other difficulties running Machines if you don't have the latest drivers from the manufacturer of your 3D accelerator card.  Drivers were being changed right up to the last minute as testing with Machines revealed small problems with various cards. 

Usually, but not always, if a board is based on one of the following chipsets, Machines will run on it. Machines may also run on new chipsets not listed here. If you are unsure of what chipset your 3D card is based on see the detailed list below.  

Supported chipsets 				Unsupported Cards/chipsets
3Dfx Interactive Voodoo/Voodoo2 Graphics 	NEC PowerVR
3Dfx Interactive Voodoo Rush/Banshee 		S3 Virge
3Dlabs Permedia2 				Rendition
ATI Technologies 3D Rage Pro/ Rage128 	Matrox Mystique
Matrox G series 
nVidia Riva128 / RivaTNT
S3 savage
Intel I740

Typically, the chipset makers expect you to go to your card manufacturer for the latest drivers for their card.  Although the chipset makers supply the 3D chip and driver software to card manufacturers, the manufacturer may tailor the driver to their particular board configuration, so the safest place to go for drivers for your board is the card manufacturer.  In some cases, however, the chip maker also manufactures the board.

Detailed list of supported 3D accelerator cards 
Chip Maker	      	Chipset Name(s)	3D Card Manufacture 		

3DFX Interactive      	Voodoo 1 (TM)       	Canopus Pure 3D (TM)
                                           			Orchid Righteous 3D (TM)
                                           			Diamond Monster 3D (TM)
                      	       	Voodoo 2 (TM)      	Creative Blaster Voodoo2(TM)
                                           			Orchid Righteous 3D II (TM)
                                           			Diamond Monster 3D II (TM)
						Obsidian (TM)
                      		Voodoo Rush (TM)        Intergraph Intense 3D (TM)
						Hercules Stingray (TM) 
3D Labs (R)           	Peremedia2 (TM)          Creative Graphics Blaster Extreme (TM)
                                      				Diamond Fire GL 1000 Pro (TM)
ATI (TM)              	Rage Pro (TM)        	ATI XPERT@WORK (TM)
                                           			ATI XPERT@PLAY (TM)
                                           			ATI XPERT 98 (TM)
                                           			All-in-Wonder Pro (TM)
Intel (TM)             	i740 (TM)           	ASUS V2740 (TM)
                                           			Diamond Stealth II G460 (TM)
                                           			Real3D Starfighter (TM)
                                           			STB System Lightspeed 740 (TM)
                                           			Hercules Terminator 2x/I (TM)
Matrox (TM)           	G200 (TM)            	Millenium G200 (TM)
                                           			Mystique G200 (TM)
                                           			Marvel G200 (TM)
nVidia (TM)     Riva128(TM)/ Riva128ZX(TM) 	STB Velocity 128 (TM)
                                           			ASUS 3DexPlorer 3000 (TM)
                                           			Canopus Total 3D 128V (TM)
                                           			Canopus WitchDoctor (TM)
                                           			Diamond Viper V330 (TM)
                      		Riva TNT (TM)        	Canopus SPECTRA 2500 (TM)
                                           			Diamond Viper V550 (TM)
                                           			STB Velocity 4400 (TM)

Detailed list of unsupported 3D accelerator cards
Chip Maker	      	Chipset Name(s)	3D Cards		
NEC (TM)             	PowerVR/PCX2(TM)	Matrox m3D (TM)
Videologic Apocalypse 3Dx(TM) Videologic Apocalypse 5D (TM)/ 5D Sonic 
Matrox (TM)		Mystique  		Matrox Mystique (TM)

Rendition (TM)       Verite V1000/2100/2200(TM)Total 3D(TM) 
Diamond Stealth II S220 (TM)
                                           			Hercules Thriller 3D(TM)/Conspiracy(TM)

If you still experience any difficulty running Machines, contact Customer Service at (516) 759-7800, or visit us online at www.acclaim.net to see if the Machines web site can help with available updates or answers to common problems. 

Enjoy the demo!!