PRINTF

Section: C Library Functions (3)
Index Return to Main Contents

BSD mandoc

NAME

printf fprintf sprintf snprintf vprintf vfprintf, vsprintf vsnprintf - formatted output conversion

SYNOPSIS

Fd #include <stdio.h> Ft int Fn printf const char *format ... Ft int Fn fprintf FILE *stream const char *format ... Ft int Fn sprintf char *str const char *format ... Ft int Fn snprintf char *str size_t size const char *format ... Fd #include <stdarg.h> Ft int Fn vprintf const char *format va_list ap Ft int Fn vfprintf FILE *stream const char *format va_list ap Ft int Fn vsprintf char *str char *format va_list ap Ft int Fn vsnprintf char *str size_t size const char *format va_list ap

DESCRIPTION

The Fn printf family of functions produces output according to a Fa format as described below. Fn Printf and Fn vprintf write output to stdout, the standard output stream; Fn fprintf and Fn vfprintf write output to the given output Fa stream ; Fn sprintf , Fn snprintf , Fn vsprintf , and Fn vsnprintf write to the character string Fa str . These functions write the output under the control of a Fa format string that specifies how subsequent arguments (or arguments accessed via the variable-length argument facilities of stdarg(3)) are converted for output. These functions return the number of characters printed (not including the trailing `\0' used to end output to strings). Fn Snprintf and Fn vsnprintf will write at most Fa size Ns -1 of the characters printed into the output string (the Fa size Ns 'th character then gets the terminating `\0' ) ; if the return value is greater than or equal to the Fa size argument, the string was too short and some of the printed characters were discarded. Fn Sprintf and Fn vsprintf effectively assume an infinite Fa size .

The format string is composed of zero or more directives: ordinary characters (not % ) which are copied unchanged to the output stream; and conversion specifications, each of which results in fetching zero or more subsequent arguments. Each conversion specification is introduced by the character % The arguments must correspond properly (after type promotion) with the conversion specifier. After the % the following appear in sequence:

Zero or more of the following flags:

A
# character specifying that the value should be converted to an ``alternate form''. For c d i n p s and u conversions, this option has no effect. For o conversions, the precision of the number is increased to force the first character of the output string to a zero (except if a zero value is printed with an explicit precision of zero). For x and X conversions, a non-zero result has the string `0x' (or `0X' for X conversions) prepended to it. For e E f g and G conversions, the result will always contain a decimal point, even if no digits follow it (normally, a decimal point appears in the results of those conversions only if a digit follows). For g and G conversions, trailing zeros are not removed from the result as they would otherwise be.
A zero
`0 ' character specifying zero padding. For all conversions except n the converted value is padded on the left with zeros rather than blanks. If a precision is given with a numeric conversion ( Mc d i o u i x and X ) the `0 ' flag is ignored.
A negative field width flag
`- ' indicates the converted value is to be left adjusted on the field boundary. Except for n conversions, the converted value is padded on the right with blanks, rather than on the left with blanks or zeros. A `- ' overrides a `0 ' if both are given.
A space, specifying that a blank should be left before a positive number
produced by a signed conversion ( d e E f g G or i )
A
`+ ' character specifying that a sign always be placed before a number produced by a signed conversion. A `+ ' overrides a space if both are used.
An optional decimal digit string specifying a minimum field width. If the converted value has fewer characters than the field width, it will be padded with spaces on the left (or right, if the left-adjustment flag has been given) to fill out the field width.
An optional precision, in the form of a period `. ' followed by an optional digit string. If the digit string is omitted, the precision is taken as zero. This gives the minimum number of digits to appear for d i o u x and X conversions, the number of digits to appear after the decimal-point for e E and f conversions, the maximum number of significant digits for g and G conversions, or the maximum number of characters to be printed from a string for s conversions.
The optional character h specifying that a following d i o u x or X conversion corresponds to a short int or unsigned short int argument, or that a following n conversion corresponds to a pointer to a short int argument.
The optional character l (ell) specifying that a following d i o u x or X conversion applies to a pointer to a long int or unsigned long int argument, or that a following n conversion corresponds to a pointer to a long int argument.
The optional character q specifying that a following d i o u x or X conversion corresponds to a quad int or unsigned quad int argument, or that a following n conversion corresponds to a pointer to a quad int argument.
The character L specifying that a following e E f g or G conversion corresponds to a long double argument (but note that long double values are not currently supported by the VAX and Tahoe compilers).
A character that specifies the type of conversion to be applied.

A field width or precision, or both, may be indicated by an asterisk `*' instead of a digit string. In this case, an int argument supplies the field width or precision. A negative field width is treated as a left adjustment flag followed by a positive field width; a negative precision is treated as though it were missing.

The conversion specifiers and their meanings are:

diouxX: The int (or appropriate variant) argument is converted to signed decimal ( d and i ) unsigned octal (o ) unsigned decimal (u ) or unsigned hexadecimal ( x and X notation. The letters abcdef are used for x conversions; the letters ABCDEF are used for X conversions. The precision, if any, gives the minimum number of digits that must appear; if the converted value requires fewer digits, it is padded on the left with zeros.
DOU: The long int argument is converted to signed decimal, unsigned octal, or unsigned decimal, as if the format had been ld lo or lu respectively. These conversion characters are deprecated, and will eventually disappear.
eE: The double argument is rounded and converted in the style [-]d . ddd e \*(Pmdd where there is one digit before the decimal-point character and the number of digits after it is equal to the precision; if the precision is missing, it is taken as 6; if the precision is zero, no decimal-point character appears. An E conversion uses the letter E (rather than e to introduce the exponent. The exponent always contains at least two digits; if the value is zero, the exponent is 00.
f: The double argument is rounded and converted to decimal notation in the style [-]ddd . ddd where the number of digits after the decimal-point character is equal to the precision specification. If the precision is missing, it is taken as 6; if the precision is explicitly zero, no decimal-point character appears. If a decimal point appears, at least one digit appears before it.
g: The double argument is converted in style f or e (or E for G conversions). The precision specifies the number of significant digits. If the precision is missing, 6 digits are given; if the precision is zero, it is treated as 1. Style e is used if the exponent from its conversion is less than -4 or greater than or equal to the precision. Trailing zeros are removed from the fractional part of the result; a decimal point appears only if it is followed by at least one digit.
c: The int argument is converted to an unsigned char and the resulting character is written.
s: The ``char '' argument is expected to be a pointer to an array of character type (pointer to a string). Characters from the array are written up to (but not including) a terminating NUL character; if a precision is specified, no more than the number specified are written. If a precision is given, no null character need be present; if the precision is not specified, or is greater than the size of the array, the array must contain a terminating NUL character.
p: The ``void '' pointer argument is printed in hexadecimal (as if by `%#x' or `%#lx' ) .
n: The number of characters written so far is stored into the integer indicated by the ``int '' (or variant) pointer argument. No argument is converted.
%: A `%' is written. No argument is converted. The complete conversion specification is `%%'

In no case does a non-existent or small field width cause truncation of a field; if the result of a conversion is wider than the field width, the field is expanded to contain the conversion result.

EXAMPLES

To print a date and time in the form `Sunday, July 3, 10:02', where weekday and month are pointers to strings:

#include <stdio.h>
fprintf(stdout, "%s, %s %d, %.2d:%.2d\n",
        weekday, month, day, hour, min);

To print to five decimal places:

#include <math.h>
#include <stdio.h>
fprintf(stdout, "pi = %.5f\n", 4 * atan(1.0));

To allocate a 128 byte string and print into it:

#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
char *newfmt(const char *fmt, ...)
{
                char *p;
                va_list ap;
                if ((p = malloc(128)) == NULL)
                        return (NULL);
                va_start(ap, fmt);
                (void) vsnprintf(p, 128, fmt, ap);
                va_end(ap);
                return (p);
}

STANDARDS

The Fn fprintf , Fn printf , Fn sprintf , Fn vprintf , Fn vfprintf , and Fn vsprintf functions conform to St -ansiC .

HISTORY

The functions Fn snprintf and Fn vsnprintf are new to this release.

BUGS

The conversion formats %D %O and %U are not standard and are provided only for backward compatibility. The effect of padding the %p format with zeros (either by the `0 ' flag or by specifying a precision), and the benign effect (i.e., none) of the `# ' flag on %n and %p conversions, as well as other nonsensical combinations such as %Ld , are not standard; such combinations should be avoided.

Because Fn sprintf and Fn vsprintf assume an infinitely long string, callers must be careful not to overflow the actual space; this is often impossible to assure. For safety, programmers should use the Fn snprintf interface instead. Unfortunately, this interface is not portable.

This document was created by man2html, using the manual pages.
Time: 21:44:09 GMT, August 05, 2022