# PR_Gruppen

PR_Bezeichnung:
NetWare NFS Services - NetWare 4 Edition 2.1


PR_Bezeichnung:
RMON Probe AXON-1000 - Single Port Probe


PR_Bezeichnung:
RMON Probe AXON-2000 - Dual Port Ethernet Probe


PR_Bezeichnung:
RMON Probe SSII EM - MultiMedia Probe Archives


PR_Bezeichnung:
RMON Probe TEM 540 - Single Port Ethernet Probe


PR_Bezeichnung:
RMON Probe TEM 542 - Dual Port Ethernet Probe


PR_Bezeichnung:
RMON Probe TEM 570 - Single Port Token-Ring Probe


# S_Gruppen

S_Hinweise:
AT1500.dos	48Kb	3/21/96		pre-release upgraded real-mode NDIS driver
					for AT1500xx-PNP network interface cards.

README.TXT		4/8/96		This readme file


This version of the AT1500.dos real-mode NDIS driver corrects certain packet handling 
methods that resulted in excessively slow file transfers, and generally sluggish throughput.


S_Hinweise:
A - AT1700.DOS  = NDIS 2.01 Driver
     B - AT1700.386  = NDIS 3.0 Driver for WFW 3.11
     C - AT1700M.SYS = Miniport Driver for Windows NT & 95
     D - AT17ODI.COM = 16-Bit DOS ODI Driver for Novell 
                       Workstations
     E - AT1700.COM  = Packet Driver
     F - AT1700.LAN  = 32-Bit ODI Driver
     G - AT1700.OS2  = OS/2 NDIS (2.01) Driver
     H - 17UNI       = Univel UNIX Driver
     I - 17SCO       = SCO UNIX Driver


S_Hinweise:
;README.NT
;This is an ASCII file. Use a text editor or a mono-space 
;font (e.g., Courier) in a word processor to view and print.
------------------------------------------------------------
--  Installation of AT-1700 Windows NT (NDIS 3.0) Driver  --
------------------------------------------------------------

If you haven't already done so, first configure your AT-1700
adapter. The SETUP17 CardAssistant program only runs on DOS.  If 
you do not have a DOS boot partition on your Windows NT drive, 
boot DOS from floppy. Use the SETUP17 "Configure I/O Parameters" 
function to configure the adapter card. Choose a base I/O address 
and interrupt level that do not conflict with other devices 
installed in your PC.  Note the addresses that you assigned to the 
AT-1700. 

************************************************************
************************************************************
**                                                        **
**    Installing the AT-1700PLUS Driver on Windows 95     **
**                                                        **
************************************************************
************************************************************
------------------------------------------------------------
--             Contents of this Read.me file              --
------------------------------------------------------------

In a ISA bus computer the AT-1700PLUS I/O defaults are base address 300 and
IRQ 15, you may need to modify these parameters.

First configure your AT-1700PLUS using the "Configure I/O Parameters"
function of the SETUP17 CardAssistant program. Choose a base I/O address and
interrupt level that do not conflict with other devices installed in your 
PC.  Note the values that you assigned to the AT-1700PLUS for use in the driver 
installation procedure below.


S_Bezeichnung:
Drv. 32bit ODI for Netware32 (WIN95) - US

S_Hinweise:
README.TXT  - This file
AT1700.LAN  - AT1700xx 32-Bit ODI Driver
ODI1700.INF - Windows 95 Network Device INF file for AT1700.LAN


S_Hinweise:
------------------------------------------------------------
--  Installation of AT-1720 Windows NT (NDIS 3.0) Driver  --
------------------------------------------------------------

If you haven't already done so, first configure your AT-1720 
adapter using the PS/2 setup utility on your computer's Reference 
Diskette.  Note the slot number that you assigned to the AT-1720.


S_Hinweise:
Corrects OS2 ODI driver inability NIC as PS/2


S_Hinweise:
Updated Netware Server driver. Supports mulitple frames!


S_Bezeichnung:
Drv. Miniport PCI warm reset problem - US

S_Hinweise:
Miniport driver for machines with PCI warm reset problem!


S_Hinweise:
Drv. Workgroup-for-Windows for the AT-2560TX NIC


S_Hinweise:
Installing ATI AT-2560 PCI/100 Ethernet Adapter drivers
   Novell network drivers      
      INFO\NETWARE\NW41.TXT
      INFO\NETWARE\NW312.TXT
      INFO\NETWARE\NW311.TXT
      INFO\NETWARE\NWODIDOS.TXT
      INFO\NETWARE\NWCLNT32.TXT
      INFO\NETWARE\NWODIOS2.TXT
      INFO\NETWARE\NWNTREQ.TXT
   Microsoft network drivers 
      INFO\MS\MSNT351.TXT
      INFO\MS\MSWIN95.TXT
      INFO\MS\MSWFW311.TXT
      INFO\MS\MSLANMGR.TXT
   IBM network drivers   
      INFO\IBM\AS400.TXT
      INFO\IBM\LANSERV.TXT
   Other network drivers      
      INFO\OTHER\LANTAS60.TXT
      INFO\OTHER\BANYAN.TXT
      INFO\OTHER\NDIS.TXT
Latest news and general adapter information
   INFO\GENERAL\RELNOTES.TXT
   INFO\GENERAL\FILES.TXT
Hardware specifications and cabling information               
   INFO\GENERAL\HWSPECS.TXT
   INFO\GENERAL\CABLE10.TXT
   INFO\GENERAL\CABLE100.TXT
Adapter installation and special configurations                 
   INFO\GENERAL\PCI.TXT
   INFO\GENERAL\DUPLEX.TXT
   INFO\GENERAL\DMI.TXT
Running diagnotics
   INFO\GENERAL\DIAG.TXT
   INFO\GENERAL\DIAGLED.TXT


S_Hinweise:
Installing ATI AT-2560FX PCI/100 Ethernet Adapter drivers
   Novell network drivers      
      INFO\NETWARE\NW41.TXT
      INFO\NETWARE\NW312.TXT
      INFO\NETWARE\NW311.TXT
      INFO\NETWARE\NWODIDOS.TXT
      INFO\NETWARE\NWCLNT32.TXT
      INFO\NETWARE\NWODIOS2.TXT
   Microsoft network drivers 
      INFO\MS\MSNT351.TXT
      INFO\MS\MSNT40.TXT
      INFO\MS\MSWIN95.TXT
      INFO\MS\MSWFW311.TXT
      INFO\MS\MSLANMGR.TXT
   IBM network drivers   
      INFO\IBM\AS400.TXT
      INFO\IBM\LANSERV.TXT
   Other network drivers      
      INFO\OTHER\LANTAS60.TXT
      INFO\OTHER\BANYAN.TXT
      INFO\OTHER\NDIS.TXT
Latest news and general adapter information
   INFO\GENERAL\RELNOTES.TXT
   INFO\GENERAL\FILES.TXT
Hardware specifications and cabling information               
   INFO\GENERAL\HWSPECS.TXT
   INFO\GENERAL\CABLFIBR.TXT
Adapter installation and special configurations                 
   INFO\GENERAL\PCI.TXT
   INFO\GENERAL\DUPLEX.TXT
   INFO\GENERAL\DMI.TXT
Running diagnotics
   INFO\GENERAL\DIAG.TXT
   INFO\GENERAL\DIAGLED.TXT


S_Hinweise:
Selbstauspackendes Archiv mit der BIANCA/BRI-Software, Release 3.1 Revision 12.


S_Hinweise:
BRICKware for Windows in einem selbstauspackenden Archiv.

Software-Release 4.4 Revision 4 für BRICK-XL, BRICK-XM und BRICK-XS


S_Bezeichnung:
3100 Management software image file v3.2 - US

S_Hinweise:
AT-3100 SOFTWARE
AT-S5: Release 3.2

- TFTP Upgrade Procedure using an image file -

	TFTP is Trivial File Transfer Protocol. It is a 
TCP/IP protocol that requires a TCP/IP stack, I.E, 
Microsoft TCP/IP stack, be installed in a PC or Apple 
Macintosh computer. In addition to the TCP/IP stack, the 
TFTP utility must also be present. UNIX computers 
typically include TCP/IP and complete sets of TCP/IP 
utilities including TFTP.  

	TFTP allows you to place a different version of 
the 3100 hub software into another 3100 hub over the 
network. An IP address must be set in the destination 
hub and the hub must be responding to PING, the ICMP 
echo request utility in TCP/IP. Insure that any Omega
Managment sessions are closed. (It' a good idea to set
the "timeout" value in the hub's Omega Manager is set to
a minute value other than "0".)


S_Bezeichnung:
3600 Management software image file v3.2 - US

S_Hinweise:
AT-3600 SOFTWARE
AT-S4: Release 3.2

- TFTP Upgrade Procedure using an image file -
	TFTP is Trivial File Transfer Protocol. It is a 
TCP/IP protocol that requires a TCP/IP stack, I.E, 
Microsoft TCP/IP stack, be installed in a PC or Apple 
Macintosh computer. In addition to the TCP/IP stack, the 
TFTP utility must also be present. UNIX computers 
typically include TCP/IP and complete sets of TCP/IP 
utilities including TFTP.  
	TFTP allows you to place a different version of 
the 3600 hub software into another 3600 hub over the 
network. An IP address must be set in the destination 
hub and the hub must be responding to PING, the ICMP 
echo request utility in TCP/IP.  Insure that "timeout" in 
the hub's Omega Manager is set to a minute value; not "0".
	TFTP utilities vary from vendor to vendor as does 
the TFTP syntax.  A typical command line syntax might look 
like this:
        C:/>TFTP put ats432.img 192.2.200.200 AT3600 octet


S_Bezeichnung:
TurboStack Management software v3.22 - US

S_Hinweise:
AT-TurboStack SOFTWARE
AT-S10: Release 3.2

- TFTP Upgrade Procedure using an image file -
	TFTP is Trivial File Transfer Protocol. It is a 
TCP/IP protocol that requires a TCP/IP stack, I.E, 
Microsoft TCP/IP stack, be installed in a PC or Apple 
Macintosh computer. In addition to the TCP/IP stack, the 
TFTP utility must also be present. UNIX computers 
typically include TCP/IP and complete sets of TCP/IP 
utilities including TFTP.  
	TFTP allows you to place a different version of 
the TurboStack hub software into another TurboStack hub
over the network. An IP address must be set in the
destination hub and the hub must be responding to PING,
the ICMP echo request utility in TCP/IP.  Insure that
"timeout" in the hub's Omega Manager is set to a minute
value; not "0".
	TFTP utilities vary from vendor to vendor as does 
the TFTP syntax.  A typical command line syntax might look 
like this:
        C:/>TFTP put ats10v32.img 192.2.200.200 AT-S10 octet


S_Hinweise:
Bitware corrected MODEMS.INF file for ComStar SVD modem.  Fixes the  distinctive ring feature.


S_Hinweise:
Windows 95 INF file for non-voice 33.6k modems.

S_Intern:
Windows 95 INF file for non-voice 33.6k modems.


S_Hinweise:
Latest PORTWIZ utility for Windows 3.1/3.11 and DOS systems.

S_Intern:
Latest PORTWIZ utility for Windows 3.1/3.11 and DOS systems.


S_Bezeichnung:
INF file ComStar,PCMCIA,33.6k (WIN95) -US

S_Hinweise:
Latest Windows 95 INF file for ComStar, PCMCIA and 33.6k modems.
Copy Inf file in Windows-Infile-direction

S_Intern:
Latest Windows 95 INF file for ComStar, PCMCIA and 33.6k modems.


S_Hinweise:
Diese Treiber gelten fuer:

LOTUS NOTES
CC-MAIL MOBIL

rev 02: -goe- 12.07.95 : Einzel-"\" durch "\\" ersetzt.  
rev 03: -an-  20.10.95 : SMARTY 28.8 TI neu
rev 04: -but- 17.04.96 : CYBERMOD 28.8 neu
rev 05: -but- 29.05.96 : FuryCard 19.2 DUO
rev 06: -but- 21.11.96 : FuryCard 28.8 P
rev 07: -but- 26.11.96 : Smarty 33.6 + RD435
rev 08: -thk- 08.04.97 : FuryCard 33.6 DUO

S_Intern:
Diese Datei enthaelt Modemtreiber fuer LOTUS NOTES und CC-MAIL MOBIL fuer folgende Dr. Neuhaus Modems: SMARTY 2400 TI/PC SMARTY 14.4 TI SMARTY 19.2 TI SMARTY 28.8 TI


S_Bezeichnung:
Drv. CarbonCopy Smarty-Series & Cybermod

S_Hinweise:
Sehr geehrter Carbon Copy Nutzer,
diese Datei gibt Hinweise zu den neuen Modemtreibern.
Auf dieser Diskette sind folgende Dateien vorhanden:


CC3.TOP       Kennung der MCMODEM.DSC fuer Carbon Copy 3.0
MODEM.DSC     Modemtreiber fuer DOS
MCMODEM.DSC   Modemtreiber fuer Carbon Copy 2.1
MCMODEM.ADD   Modemtreiber fuer Carbon Copy 3.0
Liesmich.txt  diese Datei
INSTALL.BAT   Zur einfacheren Installation der neuen Treiber

S_Intern:
Diese Datei enthaelt Treiber fuer CarbonCopy f. WIN 2.1 und 3.0 sowie DOS fuer: CYBERMOD 28.8 V.34 SMARTY 33.6 TI SMARTY 28.8 TI SMARTY 19.2 TI SMARTY 14.4 TI


S_Hinweise:
Die Firmware dieses Modems kann ueber einen Software-Download aktualisiert werden. Aufruf: "NP_401_M -Cn", wobei "n" fuer die serielle Schnittstelle steht, an der das Modem angeschlossen ist (z.B. 2 fuer COM2). Hilfe erhalten Sie ueber "NP_40

S_Intern:
Die Firmware dieses Modems kann ueber einen Software-Download aktualisiert werden. Aufruf: "NP_401_M -Cn", wobei "n" fuer die serielle Schnittstelle steht, an der das Modem angeschlossen ist (z.B. 2 fuer COM2). Hilfe erhalten Sie ueber "NP_40


S_Hinweise:
Sollten Sie bei der Modeminstallation oder beim Betreiben Ihres Modems
Probleme haben, doppelklicken Sie bitte auf der Datei MODEM.HLP.

In der selbstextrahierende Datei MODEMDOC.EXE befindet sich eine 
Druckvorlage (MODEM.DOC).

Die Hilfe bezieht sich auf die Betriebssysteme
   WINDOWS 95
   WINDOWS 95 OSR1
   WINDOWS 95 OSR2
   WINDOWS NT 4.0

S_Intern:
Diese Datei enthaelt MS-WINDOWS 95/NT 4.0 Modemtreiber fuer folgende Produkte: Dr. Neuhaus - SMARTY 24 TI, 24 PC V.22bis - SMARTY 14.4 TI V.32bis D+F - SMARTY 14.4 TI PCB4 V.32bis D+F


S_Hinweise:
Dieser Vorgang ist einmalig und muß NUR bei der ausgelieferten
Windows 95 (bis Version 4.00.950) ausgeführt werden.

  A/ Klicken Sie in der 'Systemsteuerung' auf das Icon 'Modems'
     (Task-Leiste: Start/Einstellungen/Systemsteuerung). Daraufhin
     erscheint ein Fenster mit der Bezeichnung 'Eigenschaften für
     Modems'. Entfernen Sie dort alle Dr. Neuhaus Modems und
     schließen das Fenster, sowie die 'Systemsteuerung'.

S_Intern:
Modemtreiber fuer WINDOWS 95 Version:       2.4


S_Hinweise:
Modem-Initialisierungsdatei für Windows NT 4.0

Modem models


Modem1, UNIMODEMBE0672CA ; ELINK 210/V64 ISDN TA		
Modem2, UNIMODEMFAD5D581 ; ELINK 211/Web-Jet ISDN TA	;nt
Modem3, UNIMODEMBE860885 ; ELINK 234/EF ISDN TA		;nt
Modem4, UNIMODEMA706CD0B ; ELINK 293 ISDN TA
Modem5, Elink_ModemB     ; ELINK 301 ISDN TA
Modem6, UNIMODEM8CA9D6A3 ; ELINK 310 ISDN TA		;nt
Modem6, UNIMODEMD65EBA6C ; ELINK 310-2 ISDN TA prof	;nt
Modem6, UNIMODEMF0B058BB ; ELINK 310-2 ISDN TA		;nt
Modem4, UNIMODEMC2063944 ; ELINK 323 ISDN TA
Modem4, UNIMODEM6640E836 ; ELINK 343 ISDN TA
Modem4, UNIMODEME401B5BD ; ELINK 324 ISDN TA
Modem4, UNIMODEM404764CF ; ELINK 344 ISDN TA
Modem4, UNIMODEME0E5916D ; ELINK 401 ISDN TA		;nt
Modem7, Elink_ModemC     ; ELINK ISDN Datex-P
Modem8, Elink_ModemD     ; ELINK 201 nur Wahlhilfe
Modem8, Elink_ModemE     ; ELINK 211 nur Wahlhilfe

S_Intern:
Modem-Initialisierungsdatei für Windows NT 4.0, Download als .zip-Datei


S_Hinweise:
OpenConnect Systems Incorporated
		2711 LBJ Freeway	Savannahweg 19
		Dallas, TX 75234	3542 AW Utrecht
		972-484-5200		The Netherlands
		www.oc.com		011-31-30-241-7070



		OC://WebConnectTM v2.6.2 Release Notes/README

New Features in this Version:
* International Language Support
* Clickpad Enhancement
* Help Menu Addition
* 3270 Enhancements
* HTTP Sessions and CPU Utilization
* Admin Page Expiration
* Light Pen/Cursor Select Support

Feature descriptions:

* International Language Support
  OC://WebConnect now supports 4 languages with the following enhancements:
	* Language support for Java emulation client graphical user interface (GUI).
	* Language support for server administration utilities.
	* Language support for OC://WebConnect server-generated warning/error messages.
	* Configurable server language.
	* Configurable Java emulation client language per session configuration.
	Note: Date formats and unsolicited server messages have not been internationalized.
* Clickpad Enhancement
	* Clickpad display is configurable while creating or modifying a session.  Default is to display the clickpad.
* Help Menu Addition 
  Added a "Java logging" menu option to the "Help" menu.  This is a toggle option that is used to display key values and key modifiers in a decimal format for key mapping.
* 3270 Changes
	* When logging off from CICS, the session now transitions to a SSCP-LU state for LUA/RUI 3270 sessions.
	* A single field no longer is defined at the last location on the screen.
	* When in 3270 Insert mode, Reset no longer changes the mode to overwrite.
	* Minus sign is allowed in numeric fields.
	* When using a 3270 session configured to use a default model of 3, 4, or 5 and an alternate model size of 2, the terminal type negotiated is based on the default size as well as the alternate size. A configured alternate size of 2 no longer causes the terminal type negotiation to request a model 2 size terminal session even if the default size is larger.
* HTTP Sessions and CPU Utilization
  OC://WebConnect running on NT now can utilize 100 percent of CPU with HTTP sessions connected during transfer of files.
* Admin Page Expiration
  Admin pages are no longer forced to expire. 
* LUA/RUI Support
  Windows NT version of OC://WebConnect supports Logical Unit Application/Request Unit Interface protocol for 3270 sessions communicating with an NT SNA server.  
* Light Pen/Cursor Select Simulation
  OC://WebConnect now simulates light pen/cursor select functionality for 3270. Place the cursor on a field, press SHIFT and left mouse click to simulate light pen or cursor selection.

Problem Corrections:
* VT220 keypad ENTER on the clickpad generates the correct key sequence.
* Screen paint/Refresh Option
  The Repeat to Address order functions properly.
* Zero-length Fields
  Fields with a length of zero no longer are ignored by the client.
* Existing Field List Reset
  The host no longer modifies the field list without resetting the existing field list.  All data entered from the last AID key no longer is lost if a screen update is generated by an application.
* Unreachable IP Address
  An IP address that is unreachable or does not exist no longer attempts to connect to the host on which OC://WebConnect is running.
* Repeating Period Key
  Period key now repeats when pressed and held.
* Installation Instructions
  Step number 6 in the UNIX installation procedures that refers to port numbers is no long valid. Go to step number 7. Also, a step was added in the Windows NT installation after step number 7. Step 8 now requires you to select an administration language.
  Before you install WebConnect on your Windows NT server, be sure to install the TN3270 support that is included with Microsoft SNA server. Refer to your SNA installation manual.
* Accent-Consonant in German
  When running a 3270 session in German in nat13270.kbm keyboard map, the Java client crashes if you press the accent key and a consonant. 
  To correct the problem, you must update the Java virtual machine. To do this using Internet Explorer:
  1. Access the Microsoft Java web site at http://www.microsoft.com/java 
  2. Click the Java VM Update link.
  3. Follow the instructions to update the Internet Explorer Java Virtual Machine.
* Java Port Configuration
  If you install a second wcd without starting the server, you could get an error message indicating the port number is in use. You must edit the wcd.ini file for the second installed version and change the port numbers.
* Java applet will run on SSL WebServer using https protocol.
* TN3270E was updated to be compatible with the Cisco TN server.


Known Problems:
* Low-Resolution Monitors and Invisible Data
  If you are using 3270 Model 3, 4, or 5 and a low-resolution monitor, the data in the window may not be visible. To correct the problem, decrease the font size.
* Key Functionality
  The following keys will generate keys only with Sun's Java Development Kit 1.1 (not yet implemented): INSERT, PAUSE, SCROLL LOCK, and PRINT SCREEN. 
  Limitations: Using Internet Explorer 3.0, the F10 function key is used as the shortcut key for menu toggle. Therefore, it cannot be mapped, and an alternate keymap should be used for each emulation F10 key.
* Parameter Value Propagation
  A limitation exists regarding the way parameter values are propagated through from default sessions to any created sessions. If the default 3270, 5250, or VT220 session has a parameter value coded in a field, such as a value for a script file name, this value will be propagated through to any sessions of that type that are created. There is no way to remove this value without going back to the default session and removing it there.
* Session Fields
  Session fields that should be blank are picking up default session information. This feature will be addressed in OC://WebConnect 3.0.1.
* Cisco.tcl 
  Your system may lock up when running Cisco.tcl with six or more 3270 sessions. 
* Runtime Script defklock2.tcl
  The runtime script defklock2.tcl will not run correctly in the 3270/RUI configuration for WebConnect v2.6.2. The script will not go passed the VM logon screen, however if you run the default 3270 session, the script will perform as expected. 

Server Platform Requirements:
The following platforms are supported for the 2.6 release of the OC://WebConnect Server:
* AIX 4.1.3+
* HP-UX 10.0+
* SUN Solaris 2.4+
* Windows NT 3.51+ with a minimum of Service Pack 4 or Windows NT 4.0
* All platforms 64Meg+ are recommended for maximum concurrent sessions.

Browser Requirements:
* OC://WebConnect requires Netscape 2.02 or 3.0.
* Internet Explorer 3.0 with Security Patch.

Browser Anomalies:
* Netscape
	* If the "Back" function of the browser is used to go back to the "Sessions" page after a session is started, and a new session is started, the existing session disconnects and the browser may lock up.  This has occurred on Windows NT clients with versions of Netscape Navigator prior to 3.0b6.  To avoid this problem, use the "Sessions" button on the server's main page.
	* If the Java client window is selected via the <alt-tab> keys, the user must click in the Presentation space area of the window before entering data via the keyboard.  This problem appears to be fixed with version 3.0b7 of Netscape Navigator.
	* When changing the font size, the window may not be resized properly, resulting in a menu bar double its normal height, and only the first row of keys on the click pad displays.  The window may be manually resized to display the entire presentation space.  This problem appears to be fixed with version 3.0b6 of Netscape Navigator.


* Microsoft Internet Explorer
	* Internet Explorer 3.0 requires that the URL have a host name rather that an IP address when downloading a java applet.  If you use an IP address rather than a host name, the OC://WebConnect applet will not load and "error: java.lang.VerifyError" is reported.
	* F10 and other key combinations including F10 are being used by Internet Explorer and cannot be mapped for emulation functionality.  
	* When changing the font size, the window is repositioned.  This problem appears to be fixed with version 3.0 of Internet Explorer and version 3.0 of Netscape Navigator on Windows '95.
	* The administration interface does not work properly on earlier versions of Microsoft Internet Explorer.  The latest version of Internet Explorer appears to have fixed some problems with "cookies."  This should be resolved with the security update to Internet Explorer.




Support Contacts:
* EMAIL:  webconnect@oc.com
* Telephone Support: 1-800-627-4420


S_Bezeichnung:
Scripts v1.1.2 Connectivity Tools NETSYS -US

S_Hinweise:
This is a release of interface scripts from Cisco Systems, Inc.to the customers of NETSYS Technologies, Inc. for integrating Connectivity Tools 1.1.2 with CiscoWorks 3.x

You need to install these scripts in order to use the CiscoWorks-Connectivity Tools interface features.

S_Intern:
scripts in order to use the CiscoWorks-Connectivity Tools interface features.


S_Hinweise:
Cisco IPeXchange
IPX to IP Client for Windows/Windows95

S_Intern:
Cisco IPeXchange
IPX to IP Client for Windows/Windows95


S_Hinweise:
Cisco IPeXchange
IPX to IP Client for Windows 3.x

S_Intern:
Cisco IPeXchange
IPX to IP Client for Windows 3.x


S_Hinweise:
Cisco IPeXchange
IPX to IP Client for Windows95

S_Intern:
Cisco IPeXchange
IPX to IP Client for Windows95


S_Hinweise:
Cisco IPeXchange
IPX to IP Gateway and Monitor for Windows NT

S_Intern:
Cisco IPeXchange
IPX to IP Gateway and Monitor for Windows NT


S_Hinweise:
Cisco IPeXchange
IPX to IP Gateway and Monitor for Windows NT/Netware

S_Intern:
Cisco IPeXchange
IPX to IP Gateway and Monitor for Windows NT/Netware


S_Hinweise:
T-Online Patch
---------------

Dieser Patch dient dazu den Telekom T-Online Decoder zusammen
mit der BIANCA/BRICK Remote CAPI fuer den Internetzugang 
zu benutzen.


S_Hinweise:
AT-RMON Probe Software
AT-S15: Release 1.3.2

 All probes and firmware cassettes have software pre-loaded at the ATI factory prior to shipping. The following pages explain new features and software corrections.

This AT-RMON probe  or AT-S15 firmware cassette is pre-loaded with release 1.3.2.

Firmware Cassette

You can use the cassette to override login options for password protection, perform software upgrades, and for backup protection.


S_Hinweise:
BIANCA/BRICK-XL  Boot-Image Release 4.4 Rev.4


S_Bezeichnung:
TurboStack Support AT-View v3.0.1 (WIN) - US

S_Hinweise:
TurboStack Support to AT-View for Windows v3.0.1


S_Bezeichnung:
TurboStack HP OpenView v2.0.2 (WIN) - US

S_Hinweise:
TurboStack Support to AT-VIEW for HP OpenView for Windows


S_Hinweise:
Für den ISDN-Teil des Prolink die aktuelle freigegebene Version 2.20 für Platinenrevision H bis J.


S_Hinweise:
Für den ISDN-Teil des Prolink die aktuelle freigegebene Version 2.20 für Platinenrevision K

S_Intern:
Für den ISDN-Teil des Prolink die aktuelle freigegebene Version 2.20 für Platinenrevision K


S_Hinweise:
Für das Flashen der ISDN-Firmware gibt es einen neuen Loader in Version 1.02 für die J-Platinen

S_Intern:
Für das Flashen der ISDN-Firmware gibt es einen neuen Loader in Version 1.02 für die J-Platinen


S_Hinweise:
Für das Flashen der ISDN-Firmware gibt es einen neuen Loader in Version 1.02 für die K-Platinen

S_Intern:
Für das Flashen der ISDN-Firmware gibt es einen neuen Loader in Version 1.02 für die K-Platinen


S_Hinweise:
Aktuelle Firmware für TKR TriStar / TKR TriStar+ v1.24


S_Hinweise:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für das Betriebssystem DOS

S_Intern:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für das Betriebssystem DOS


S_Hinweise:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für Windows NT 4.0

S_Intern:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für Windows NT 4.0


S_Hinweise:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für OS/2

S_Intern:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für OS/2


S_Hinweise:
Columbus One  Windows 95  Update columbus.exe 1.7 Mb NDIS WAN Miniport


S_Hinweise:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für Windows 3.1/3.11

S_Intern:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für Windows 3.1/3.11


S_Hinweise:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für Win95

S_Intern:
Die aktuelle Version 2.04 der Treibersoftware für die TKR MultiLink für Win95


S_Hinweise:
Firmware FastLink mit Eprom:
Für FastLink mit Platinenrevision E bis F finden Sie hier die Firmware 1.57, die jetzt auch HDLC mit synchronem PPP unterstützt. Die geladenen Dateien müssen in ein Eprom gebrannt werden.


S_Hinweise:
Firmware FastLink mit Eprom:
Für FastLink mit Platinenrevision G - H finden Sie hier die Firmware 1.57, die jetzt auch HDLC mit synchronem PPP unterstützt. Die geladenen Dateien müssen in ein Eprom gebrannt werden.


S_Hinweise:
Version 1.23 der Firmware für den Modem-Teil des ProLink. Mit dieser Firmware werden jetzt auch analoge Verbindungen mit bis zu 33.600 Bit/s nach ITU V.34 unterstützt.

S_Intern:
Version 1.23 der Firmware für den Modem-Teil des ProLink. Mit dieser Firmware werden jetzt auch analoge Verbindungen mit bis zu 33.600 Bit/s nach ITU V.34 unterstützt.


S_Hinweise:
FastLink mit Flash-ROM:
aktuelle freigegebene Version 2.20 für Platinenrevision J FASTJ.220

S_Intern:
aktuelle freigegebene Version 2.20 für Platinenrevision J FASTJ.220


S_Hinweise:
FastLink mit Flash-ROM:
aktuelle freigegebene Version 2.20 für Platinenrevision K FASTJ.220

S_Intern:
aktuelle freigegebene Version 2.20 für Platinenrevision K FASTK.220. Zusätzlich


S_Hinweise:
FastLink mit Flash-ROM:
Für das Flashen der Firmware gibt es einen neuen Loader in Version 1.02 für J-Platinen (FASTLOADERJ.102)

S_Intern:
Für das Flashen der Firmware gibt es einen neuen Loader in Version 1.02 für J-Platinen (FASTLOADERJ.102)


S_Hinweise:
FastLink mit Flash-ROM:
Für das Flashen der Firmware gibt es einen neuen Loader in Version 1.02 für K-Platinen

S_Intern:
Für das Flashen der Firmware gibt es einen neuen Loader in Version 1.02 für K-Platinen


S_Hinweise:
Columbus World  Windows NT 4.0 2.22 colum222.exe 1.7 Mb


S_Bezeichnung:
Comport-Emulator für ISDN-Karten (WIN 95) - D

S_Hinweise:
Comport-Emulator für ISDN-Karten unter Windows 95 - Demoversion


S_Hinweise:
Lexmark MarkNet XLe External Network Adapter firmware flash file. Code Level 04.130.01. Bug fixes are included in the README.1ST.

S_Intern:
Lexmark MarkNet XLe External Network Adapter firmware flash file. Code Level 04.130.01. Bug fixes are included in the README.1ST. IMPORTANT NOTICE FOR NETWARE USERS: 1) This firmware includes NDS support for PServer mode and is NOT compatible with ol


S_Hinweise:
Lexmark MarkNet S Internal Network Adapter Self-Extracting firmware flash file for the Lexmark Optra S line of printers. Code Level 1.6.5. Please read the README.TXT file first.

S_Intern:
Lexmark MarkNet S Internal Network Adapter Self-Extracting firmware flash file for the Lexmark Optra S line of printers. Code Level 1.6.5. Please read the README.TXT file first.


S_Hinweise:
Lexmark MarkNet XL Internal Network Adapter firmware flash file. Code Level 79.130.01. Bug fixes are included in the README.1ST.

S_Intern:
Lexmark MarkNet XL Internal Network Adapter firmware flash file. Code Level 79.130.01. Bug fixes are included in the README.1ST.


S_Hinweise:
Lexmark MarkNet Internal Network Adapter firmware flash file. Code Level 07.84.01. Bug fixes are included in the README.1ST.

S_Intern:
Lexmark MarkNet Internal Network Adapter firmware flash file. Code Level 07.84.01. Bug fixes are included in the README.1ST.


S_Hinweise:
Diese Version beinhaltet die DOS, Windows 3.x und NetWare Capi Software

                        V3.00 für die ix1-basic Karte.
                                       
Es werden ix1-basic Karten für den ISA-, MCA- und PCI-Bus unterstützt.
Zu dieser Software gehört das Handbuch "Installation und Schnittstellen".
Mit einer getrennten Downloadsoftware und einer Fax/Modem Erweiterung wird 
auch Modembetrieb bis 14400 bit/s über CAPI unterstützt. 
Hierzu muß das B2-Protokoll Modem (0x0c) eingestellt werden. Dieses
Binfile liegt auf dem Express-Server unter dem Namen "ixmodem" bereit.


S_Bezeichnung:
Util. MarkNet XL migration v1.04 (NOV) - US

S_Hinweise:
MarkNet XL migration utility for NetWare. Supports Token Ring and Ethernet MarkNet XLs. This is version 1.04 of this packaged file. IMPORTANT NOTICE: Concurrent with release 4.X of the Network Printer Utility.

S_Intern:
MarkNet XL migration utility for NetWare. Supports Token Ring and Ethernet MarkNet XLs. This is version 1.04 of this packaged file. IMPORTANT NOTICE: Concurrent with release 4.X of the Network Printer Utility.


S_Bezeichnung:
Drv. v3.01 nicht für VCAPI (DOS,WIN,NOV) - D

S_Hinweise:
Diese Version beinhaltet die DOS, Windows 3.x und NetWare Capi Software

                        V3.01 für die ix1-basic Karte.
                                       
Es werden ix1-basic Karten für den ISA-, MCA- und PCI-Bus unterstützt.
Zu dieser Software gehört das Handbuch "Installation und Schnittstellen".
Mit einer getrennten Downloadsoftware und einer Fax/Modem Erweiterung wird 
auch Modembetrieb bis 14400 bit/s über CAPI unterstützt. 
Hierzu muß das B2-Protokoll Modem (0x0c) eingestellt werden. Dieses
Binfile liegt auf dem Express-Server unter dem Namen "ixmodem" bereit.


S_Hinweise:
Windows 95 
3.02 
baw95itk.exe 
627 kb 
ITK Subsystem NEU


S_Hinweise:
Windows 95 
3.00 
baw95aco.exe 
628 kb 
 Acotec Subsystem


S_Hinweise:
Windows 95 
vinwm.exe 
1.0 Mb 
NDIS WAN Miniport


S_Hinweise:
Windows NT 
3.01 
basicnt.exe 
633 kb 
NDIS WAN Miniport NEU


S_Bezeichnung:
Drv. v3.01 not for VCAPI (DOS,WIN,NOV) - D


S_Bezeichnung:
Utility METZ Phones 5.6 v1.02 (WIN95) -US

S_Hinweise:
METZ Phones Administrator 1.02. Administrator
module for METZ Phones 5.6, which allows you
to manage security for your METZ Phones data.
Control access to phone books, features and
individual fields on a user and group basis.
If you are concerned about your contact
information security, this is the solution.
Trial version. Windows 95 version.
METZ PHONES ADDRESS TELEPHONE NETWORK
METZ Software - (206) 641-4525


S_Hinweise:
METZ Lock 4.0 - complete password
protection for Windows. Use Lock to protect
your PC. Prevent unauthorized use and disable
Ctrl-Alt-Del. Customize Lock to meet your
security needs. Novell 3.x, 4.x and Banyan
Vines passwords are also supported. Includes
online help and install. See included
METZLOCK.TXT for additional information.
METZ LOCK WINDOWS NOVELL BANYAN SECURITY
METZ Software - (206) 641-4525


S_Hinweise:
METZ Phones is an intelligent, easy-to-use phone book that improves  business productivity. You'll find METZ Phones even easier to use & includes  important new features:  fast data entry, database synchronization & email  support


S_Hinweise:
Banyan MAPI 1.0
Version 1.2
Release Notice


S_Hinweise:
Download the Free Simple MAPI v 2.03 driver

S_Intern:
Download the Free Simple MAPI v 2.03 driver


S_Hinweise:
007 for Win32 is an innovative software which allows you to 
password protect existing Win32 executables. You can effectively 
lock your most sensitive programs and utilities (like tax 
preparation or financial planning software) from unauthorized 
access. Only the person who knows protection password can run the 
program.


S_Hinweise:
Banyan Enterprise Client Version 7.26 for Windows NT Download


S_Bezeichnung:
Utility Enterprise Client Release 4 (NT) -US

S_Hinweise:
Enterprise Client Release 4 for Windows NT Installation Notes:

S_Intern:
Enterprise Client Release 4 for Windows NT


S_Hinweise:
A Windows 3.x version of Banyan's PCMAIL program.  This program requires  VBRUN300.DLL, which is not included.  This program is FREEWARE.


S_Bezeichnung:
Utility Net-Connecting v1.1 (WIN95/NT) -US

S_Hinweise:
Stay Connected! 1.1 for Windows 95/NT
Unlimited Internet access? Not! This 
program keeps Internet Service Providers 
(ISP) from dropping your Internet 
connectivity after certain period of 
inactivity (usually 15 minutes). The 
program keeps the internet connection 
alive by sending/receiving packets to
a host at a specified interval. Runs in
traybar. Full automated. <ASP>


S_Hinweise:
VER. 1.07 PERIPHERAL ADAPTER SUPPORT SOFTWARE FOR BANYAN VINES(R) 6.0
                    INSTALLATION AND REFERENCE


S_Hinweise:
Revision 1.0.2, Allied Telesyn/AT-2560 driver for VINES 6.3


S_Hinweise:
Driver for Mylex Family of RAID Controllers 
  for VINES release 6.x and above


S_Hinweise:
Rev. 2.00  Compaq Smart-2 EISA/PCI driver


S_Hinweise:
Driver Package Name: MegaRAID driver Package,  Version: 2.10


S_Hinweise:
Revision 1.0.3,  3Com 3C90x driver for VINES 6.40 and above.


S_Hinweise:
Ver 2.03, COMPAQ LAN ADAPTER SUPPORT SOFTWARE FOR BANYAN VINES
          6.0 and 7.0 INSTALLATION AND REFERENCE


S_Hinweise:
BTC 1890 driver for Windows 95 with Cyrix or IBM CPUs, Version 1.16S (274 KB)

S_Intern:
BTC 1890 driver for Windows 95 with Cyrix or IBM CPUs, Version 1.16S (274 KB)


S_Hinweise:
BTC 1890 driver for Windows 95 with Intel Pentium or AMD CPUs, Version 1.16S

S_Intern:
BTC 1890 driver for Windows 95 with Intel Pentium or AMD CPUs, Version 1.16S (279 KB)


S_Hinweise:
BTC 1898 Win95 driver for Cyrix or IBM CPUs, Version 2.16S (270 KB)

S_Intern:
BTC 1898 Win95 driver for Cyrix or IBM CPUs, Version 2.16S (270 KB)


S_Hinweise:
BTC 1898 driver for Windows 95 with Intel Pentium or AMD CPUs, Version 2.16S (329 KB)

S_Intern:
BTC 1898 driver for Windows 95 with Intel Pentium or AMD CPUs, Version 2.16S (329 KB)


S_Bezeichnung:
Drv. BIANCA/BRI v3.1 Rev. 12 (DOS, WIN) - US

S_Hinweise:
BIANCA/BRI-Software, Release 3.1 Revision 12. for DOS and Windows 3.1x

2 Zips-Files


S_Hinweise:
Driver Package Name:          MVOS3XE.EXE
Version:                      2.13
Date:                         05/19/97
Version History:              Update

Description:
------------
 MVOS3XE.EXE v2.13 contains self-extracting files for English
 MarkVision for OS/2.

S_Intern:
This file contains MarkVision for OS/2 Warp, version 2.13. Usage Notes: After completion of the unpacking process, read the README.1ST for important information. Then run the RUNME.CMD program to create disks or copy the files to a


S_Hinweise:
ix1-micro 2.x 
DOS 
2.21 
micro221.exe 
                                                                       357 kb 
NEU


S_Hinweise:
ix1-micro 2.x v2.21 für Windows 95 mic2x221.exe 3,3MB


S_Hinweise:
Windows NT 3.51 
2.22 
micro222.exe                                                                      446 kb                                                                               NEU


S_Hinweise:
Windows NT 4.0 
2.22 
mic2x222.exe                                                                       1.7 Mb                                                                            NEU


S_Hinweise:
Windows NT 4.0 
2.22 
mic30222.exe 
1.7 Mb 
NEU


S_Hinweise:
This file contains information on how to install a "dual chip" 
          E22XX network adapter


S_Hinweise:
ix1-micro 3.0 
Windows 95 
2.21 
mic30221.exe 
3.3 Mb                                                                           NEU


S_Hinweise:
; Cabletron Network Interface Cards.
;
; VeRsIoN=1.00 Novell Windows 95 INF file: Cabletron Adapters
; CoPyRiGhT=(c) Copyright 1996, by Novell, Inc. All rights reserved.


S_Hinweise:
DIVA for DOS 5.03b - International Drivers


S_Hinweise:
Installation-Hints for ISDN-DIVA Cards with OS/2
        ------------------------------------------------

  ISA- and MC-Bus-Cards
  ---------------------

    Edit your CONFIG.SYS file and add the following lines at the end:
    Insert the correct values for I/O-Address, Interrupt-Number and Path-
    Statements.

    DEVICE=DIDD.OS2
    DEVICE=DIMAINT.OS2
    DEVICE=DLOAD.OS2 -a<I/O-Address> -i<Interrupt-Number> -f<<path>DIVA.BIN>
    DEVICE=TED1TR6.OS2 -a<I/O-Address>
    DEVICE=DIAPIS.OS2
    DEVICE=CAPI20.OS2

    Default values and range of I/O-Adr. and Interrupt-Number take from the
    installation manual. Installation procedure for Microchannel-Cards get
    although from this manual.


S_Hinweise:
DIVA Piccola for DOS 5.03b - International Drivers


S_Hinweise:
DIVA Pro for DOS 5.03b - International Drivers


S_Hinweise:
ix1-multiModem 
DOS · Windows 3.x · Novell NetWare 
2.43 
lxm.bin 
                                                                       386 kb


S_Hinweise:
Eicon Technology DIVA for Windows NT / ISDN Server for Windows NT (1.09)
  ========================================================================



Contents
--------

  1 Summary
  2 Installation requirements
  3 Quick installation guide (Windows NT 3.5x)
  4 Quick installation guide (Windows NT 4.0)
  5 Other differences under Windows NT 4.0
  6 Installation of the DIVA Pro card
  7 Installation of the Maestra card
  8 Installation from CD-ROM
  9 Installation from Hard Disk or Network
 10 Special restrictions to the 16 Bit CAPI 2.0 DLL
 11 Ordering codes for ISDN lines in USA/Canada
 12 Known problems
 13 Release notes
 14 Registered trademarks
 15 Copyright


S_Hinweise:
Welcome to DIVA for Windows 3.x (V 1.20) NWC
            --------------------------------------------

Contents
--------

  1 Introduction
  2 Starting the Installation
  3 Supplements to the printed manual
  4 Release notes
  5 Registered trademarks
  6 Copyright


1 Introduction
--------------

  DIVA for Windows 3.x is an intelligent hardware and software
  solution designed for the Microsoft Windows 3.x desktop environment.
  It provides access to high-speed ISDN communication lines for
  stand-alone client PCs and those connected to small LANs.


S_Hinweise:
====================================================================
                       DIVA for Windows 95
====================================================================


========================

 Contents
=========

 1.   Installation Hints

 2.   HyperTerminal Setting

 3.   COM-Port Initialization

 4.   Various items




 1.   Installation hints
========================

ATTENTION

If you use an OLD VERSION 1.0, 1.1 or a previous 
BETA version of DIVA for Windows 95 or beta version 
of Microsoft's ISDN accelerator pack,
please perform the following steps:


S_Hinweise:
DOS · Windows 3.x · Novell NetWare 
2.43 
lxboot.scr 
                                                                        33 kb


S_Bezeichnung:
Drv.Set DIVA Lite v2.02 (DIVA, Maestra) (WIN) -US

S_Hinweise:
Welcome to DIVA for Workgroups Lite (V 2.02)
         --------------------------------------------

Contents
--------

  1 Introduction
  2 Installation Requirements
  3 Starting the Installation
  4 Installation from CD-ROM
  5 Supplements to the printed manual
  6 Release notes
  7 Registered trademarks
  8 Copyright


1 Introduction
--------------

  DIVA for Workgroups is an intelligent hardware and software
  solution designed for the Microsoft Windows for Workgroups desktop
  environment. It provides access to high-speed ISDN communication
  lines for stand-alone client PCs and those connected to small LANs.


S_Bezeichnung:
Drv.Set DIVA Lite (DIVA, Maestro) v2.02  (WIN) -D

S_Hinweise:
Willkommen zu DIVA for Workgroups (V 2.02)
         ------------------------------------------

Inhalt
------

  1 Einführung
  2 Installationsvoraussetzungen
  3 Start der Installation
  4 Installation von CD-ROM
  5 Zusätzliche Informationen zum Handbuch
  6 Informationen zur Version
  7 Eingetragene Warenzeichen
  8 Copyright


1 Einführung
------------

  DIVA for Workgroups ist eine intelligente Hard- und Softwarelösung
  für Windows for Workgroups Systeme. Sie ermöglicht die Kommunikation
  mit hohem Datendurchsatz über ISDN für Stand-Alone PCs sowie für in
  lokale Netze eingebundene PCs.


S_Bezeichnung:
Drv.Set DIVA Lite (S, SX) v2.02  (WIN) -D


S_Bezeichnung:
Drv.Set DIVA Lite (S, SX) v2.02 (WIN) -US


S_Bezeichnung:
ISDN Protocols DIVA Series v1.09 (NT) -US

S_Hinweise:
Product:      DIVA for Windows NT Version 1.09 I386 (a final product release final )
Build:        97-106
Revision:     DIVA for Windows NT Version 1.09 I386 product/nt/digi-nt/english/i386 97-106

Media table
===========

Volume   Media-Type Label
diva     Floppy     ISDN Protocols for Windows NT Version 1.09 (All DIVA Cards, I386)      
drivers2 Floppy     DIVA for Windows NT Version 1.09 I386 Drivers2 (Software)


S_Hinweise:
Diese Version beinhaltet die DOS und NetWare Capi Software

           V2.43 fr die ix1-primary Voice Karte.

Zu dieser Software gehrt das Handbuch "Installation und Schnittstellen" 
in der Version 2.1. Falls Sie das Handbuch noch nicht besitzen, knnen Sie 
dieses ber unsere Hotline anfordern.

WICHTIG:
Die ix1-primary Voice Karte untersttzt nur Sprach- und keine
Datenverbindungen.

Die ix1-primary Karte ist im Line-Access Mode 'Punkt zu Punkt' zu 
betreiben (Einstellung bei Lieferung).


S_Bezeichnung:
ISDN Protocols DIVA Series v1.09 (NT) -D

S_Hinweise:
Product:      Digital NT Version 1.09 I386 (a final product release final )
Build:        97-106
Revision:     Digital NT Version 1.09 I386 product/nt/digi-nt/german/i386 97-106

Media table
===========

Volume   Media-Type Label
diva     Floppy     ISDN Protocols for Windows NT Version 1.09 (All DIVA Cards, I386)      
drivers2 Floppy     Digital NT Version 1.09 I386 Drivers2 (Software)


S_Hinweise:
Changes to the new version 5.03 that are not mentioned in the manual:
_____________________________________________________________________


1. The setup utility for the DIVA card family is no longer supported. 
Installing the DOS drivers needs to be done manually.


2. The driver 'DLOAD.EXE' for the DIVA card family is no longer needed. 
The protocol driver also includes the DLOAD.EXE driver. This simplifies 
the installation. Due to the new additional function of the protocol driver,
additionally the interrupt parameter needs to be given:

OLD:      DLOAD -a240 -i3
          TEDETSI -a240
          ...

NEW:      TEDETSI -a240 -i3 
          ...


S_Hinweise:
nderungen bei der neuen Version 5.03, die nicht im Handbuch stehen:
_____________________________________________________________________


1. Das Setup-Programm fr die DIVA-Kartenfamilie wird nicht mehr 
untersttzt. Somit muá die Installation der Treiber in jedem Fall manuell 
erfolgen.


2. Der Treiber 'DLOAD.EXE' fr die DIVA-Kartenfamilie ist nicht mehr 
vorhanden. Der Protokoll-Treiber TED**** hat diese Funktion mit bernommen.
Dadurch ergibt sich eine einfachere Installation. Durch die erweiterte 
Funktionalitt des Protokoll-Treibers ist jedoch zustzlich die Angabe des
eingestellten Interrupts erforderlich.


ALT:      DLOAD -a240 -i3
          TEDETSI -a240
          ...

NEU:      TEDETSI -a240 -i3 
          ...


S_Bezeichnung:
Drv.  ENET MLID E10XX v1.03.01 (WIN) -US


S_Hinweise:
Diese Version beinhaltet die DOS und NetWare Capi Software

           V2.43 fr die ix1-primary Data Karte.

Zu dieser Software gehrt das Handbuch "Installation und Schnittstellen" 
in der Version 2.1. Falls Sie das Handbuch noch nicht besitzen, knnen Sie 
dieses ber unsere Hotline anfordern.

Die Protokolle T.90 und ISO 8208 werden nur mit einer 8MB ix1-primary 
Karte gemá CAPI Ergnzungen standardmáig untersttzt. 

Die ix1-primary Karte ist im Line-Access Mode 'Punkt zu Punkt' zu 
betreiben (Einstellung bei Lieferung).


S_Hinweise:
OS/2 specific topics for the MAESTRA ISDN-Adaptercard
=====================================================

This file contains additional information about the Eicon.Diehl
user manual, which is shipped with every Eicon.Diehl ISDN-Adapter.
The user manual describes the the installation of the hardware,
the installation of DOS software and the communication interface
between Eicon.Diehl ISDN-Adapters and driver software.

This file covers the OS/2 specific topics of software installation
for the MAESTRA adapter type. For hardware installation please ALWAYS
refer to the specific chapter of the Eicon.Diehl user manual
accompanied by your ISDN-Adapter.


Contents
--------

1. Device driver quick installation guide
2. Included applications
3. Command line parameters
4. Short device drivers functional description
5. Short application functional description
6. Loading order in file CONFIG.SYS
7. Detailed ISDNXDI description
8. Preview
9. Capi informations
10. Ordering codes for ISDN lines in USA/Canada


S_Hinweise:
Diese Version beinhaltet die DOS und NetWare Capi Software

           V2.43 fr die ix1-primary Power Karte.

Zu dieser Software gehrt das Handbuch "Installation und Schnittstellen" 
in der Version 2.1. Falls Sie das Handbuch noch nicht besitzen, knnen Sie 
dieses ber unsere Hotline anfordern.

Die Protokolle T.90 und ISO 8208 werden in dieser Version gemá CAPI 
Ergnzungen standardmáig untersttzt. 

Die ix1-primary Karte ist im Line-Access Mode 'Punkt zu Punkt' zu 
betreiben (Einstellung bei Lieferung).


S_Hinweise:
DOS 5.03 drivers
5.03b update (16.01.97):

Changes:
    changed capi/dos from to 96-158 97-181

Fixed Problems:

    Description
    The T-Online hangs if it starts testing the existance of the capi20 drivers.

5.03a update:

Changes:
	changed protocol/dos from 96-208 to 96-218 (uses common protocol code 96-531)
	changed protocol/mips from 96-190 to 96-195 (uses common protocol code 96-531)
	changed capi/dos from 96-152 to 96-158


S_Hinweise:
;
; Cabletron Systems Inc.
; F70X9 Eisa FDDI DNI adapter card confhguration file
;
; Version 0.2
;


S_Hinweise:
OS/2 specific topics for active Eicon.Diehl ISDN-Adaptercards
=======================================================

This file contains additional information about the Eicon.Diehl User
Manual, which is shipped with every Eicon.Diehl ISDN-Adapter. The User
Manual descibes the the installation of the hardware, the
installation of DOS software and the communication interface between
Eicon.Diehl ISDN-Adapters and driver software.

This file covers the OS/2 specific topics of software installation for
adapter types Sx, Sxn, S, SCOM, QUADRO and P.  For hardware
installation please ALWAYS refer to the specific chapter of the
Eicon.Diehl User Manual accompanied by your ISDN-Adapter.


Contents
--------

1. Device driver quick installation guide
2. Included applications
3. Command line parameters
4. Short device drivers functional description
5. Short application functional description
6. Loading order in file CONFIG.SYS
7. News for the Version 5.03
8. Detailed ISDNXDI description (*)
9. Capi informations
10.Preview


S_Bezeichnung:
ISDN Protocols Quadro, S2M v1.09 (NT) -D

S_Hinweise:
Product:      DIVA for Windows NT Version 1.09 I386 (a final product release final )
Build:        97-106
Revision:     DIVA for Windows NT Version 1.09 I386 product/nt/digi-nt/english/i386 97-106

Media table
===========

Volume   Media-Type Label
quad_s2m Floppy     ISDN Protocols for Windows NT Version 1.09 (QUADRO/S2M)         
scom_mae Floppy     ISDN Protocols for Windows NT Version 1.09 (SXn/SCOM/MAESTRA)


S_Hinweise:
WCONAG4.NLM V 1.23 für NetWare 4.10 und 
IntranetWare


S_Bezeichnung:
ISDN Protocols SXn, SCOM, Maestra v1.09 (NT) -D

S_Hinweise:
Product:      Digital NT Version 1.09 I386 (a final product release final )
Build:        97-106
Revision:     Digital NT Version 1.09 I386 product/nt/digi-nt/german/i386 97-106

Media table
===========

Volume   Media-Type Label
s_sx     Floppy     ISDN Protocols for Windows NT Version 1.09 (S/SX)         
scom_mae Floppy     ISDN Protocols for Windows NT Version 1.09 (SXn/SCOM/MAESTRA)


S_Hinweise:
Driver Package Name:          MVWN95DG.EXE
Version:                      1.04
Date:                         12/05/96
Version History:              Update

Description:
------------
 MVWN95DG.EXE v1.04 contains self-extracting files for German
 MarkVision for Windows 95

S_Intern:
v1.04   PackageType: Disk Image Application:Disks Set - Win 95 - Setup/MarkVision/Drivers      DataStream: PCL5E, PS 2        Product Name: Optra EP, Optra E, Optra N, 4039 plus, Optra C, Optra plus, Optra


S_Hinweise:
Driver Package Name:          MVOS3XG.EXE
Version:                      2.00
Date:                         05/07/96
Version History:              Update

Description:
------------
 MVOS3XG.EXE v2.00 contains self-extracting files for German
 MarkVision for OS/2.

S_Intern:
Disks Set - OS/2 Warp - Setup/MarkVision/Drivers     DataStream: PCL5E, PS 2


S_Hinweise:
UPGRADES für das FDDI Treiber Release 2.03


S_Hinweise:
MarkVision v2.00.01 and Network Printer Utility v6.00.01 for Windows NT 4.0 - INTEL PLATFORM. Supports Token Ring and EtherNet INAs (MarkNet and MarkNet XL) and MarkNet XLe's.


S_Hinweise:
This file contains 32-bit MarkVision for Microsoft Windows 95 and Microsoft Windows NT 4.0. Running the downloaded executable launched the MarkVision for Windows 95/NT 4.0 installation program. Package version 3.03


S_Bezeichnung:
Drv. RTL8019 ISA PnP Miniport (NT3/NT4) -US


S_Hinweise:
Netware 4.11 Treiber (Beta Status) Version 1.81


S_Hinweise:
Product:      Digital NT Version 1.09 I386 (a final product release final )
Build:        97-106
Revision:     Digital NT Version 1.09 I386 product/nt/digi-nt/german/i386 97-106

Media table
===========

Volume   Media-Type Label
diva     Floppy     ISDN Protocols for Windows NT Version 1.09 (All DIVA Cards, I386)      
s_sx     Floppy     ISDN Protocols for Windows NT Version 1.09 (S/SX)

S_Intern:
ISDN Protocols for Windows NT Version 1.09 (S/SX)


S_Hinweise:
Dieses Archiv enthält die neueste Version des Compu-Shack FDDI Treibers für Windows 95, Windows NT 3.51 und Windows NT 4.0 Dieser Treiber arbeitet NICHT auf Windows NT 3.50 sowie Windows NT 3.1


S_Hinweise:
This is the setup of the CS-Care 2.3 Patch A. 
The patch improves the functionality of CS-Care 2.3.


S_Bezeichnung:
ISDN Protocols SXn, SCOM, Maestra v1.09 (NT) -US

S_Hinweise:
Product:      DIVA for Windows NT Version 1.09 I386 (a final product release final )
Build:        97-106
Revision:     DIVA for Windows NT Version 1.09 I386 product/nt/digi-nt/english/i386 97-106

Media table
===========

Volume   Media-Type Label
diva     Floppy     ISDN Protocols for Windows NT Version 1.09 (All DIVA Cards, I386)      
scom_mae Floppy     ISDN Protocols for Windows NT Version 1.09 (SXn/SCOM/MAESTRA)

S_Intern:
ISDN Protocols for Windows NT Version 1.09 (SXn/SCOM/MAESTRA)


S_Hinweise:
New Features of MPR 3.1 by Novell:
		- Support of NetWare 4.1x
		- static IPX Routing
		- On Demand Links
		- NLSP
		- Enhanced Filtering

	New Features of the WAN-ODI ISDN driver:
		- Sleeping Timeout (logically)
		- Enhanced Partner Dependant Filtering
		- PPP with CHAP an PAP Password Authentication
		- Backup Wan Call Targets


	New Features for Virtual Ethernet
		- In- and Outbound dial number lists
		- Routing between ISDN partners
		- Sleeping Timeout (logically)
		- Enhanced Partner Dependant Filtering
		- Apple Macintosh Access with Leonardo Pro


S_Hinweise:
please refer to S Series category
bitte vergleichen sie die S Series Kategorie

S_Intern:
please refer to S Series category
bitte vergleichen sie die S Series Kategorie


S_Hinweise:
Diese Version beinhaltet die Windows NT Treiber-Software 

       V2.22 für die ix1-pico Karte


S_Hinweise:
please refer to S Series category
bitte vergleichen Sie die S Series Kategorie

S_Intern:
please refer to S Series category
bitte vergleichen Sie die S Series Kategorie


S_Hinweise:
Windows 95 
2.21 
pico221.exe                                                                      3.3 Mb


S_Hinweise:
please refer to Maestra Series category
bitte vergleichen Sie die Maestra Series Kategorie

S_Intern:
please refer to Maestra Series category
bitte vergleichen Sie die Maestra Series Kategorie


S_Hinweise:
please refer to Quadro Series category
bitte vergleichen Sie die Quadro Series Kategorie

S_Intern:
please refer to Quadro Series category
bitte vergleichen Sie die Quadro Series Kategorie


S_Hinweise:
please refer to SCOM Series category
bitte vergleichen Sie die SCOM Series Kategorie

S_Intern:
please refer to SCOM Series category
bitte vergleichen Sie die SCOM Series Kategorie


S_Hinweise:
please refer to DIVA Series category
bitte vergleichen Sie die DIVA Series Kategorie

S_Intern:
please refer to DIVA Series category
bitte vergleichen Sie die DIVA Series Kategorie


S_Bezeichnung:
Drv.Set DIVA Lite (DIVA, Maestro) v2.02 (WIN) -D


S_Bezeichnung:
Drv.Set DIVA Lite (S, SX) v2.02 (WIN) -D


S_Hinweise:
PCI Ehernet Card Software Version 1.04
--------------------------------------

This disk contains the binary final release of PCI Ethernet Card Version 1.04
software. The drivers included in this release are:

IPX Driver
ODI (DOS, OS/2, Server)
NDIS 2.0.1 (DOS, OS/2)
NDIS 3.0 (WFW 3.11, NT 3.1 / 3.5 / 3.51 / 4.0, WINDOWS 95)
Packet Driver
LANTASTI(5.0, 6.0) Driver
SCO UNIX (3.x, 4.x)
Configuration and Diagnostic Program
Network Operating System Easy Installatin Program
RPL Boot ROM Installation Guide(\SERVER.ODI, \WINNT)


S_Hinweise:
PnP Ehernet Adapter Software Release Version 1.00
-------------------------------------------------

This disk contains the binary final release of PnP Ethernet Adapter Version 1.00
software. The drivers included in this release are:

NetWare IPX Driver
NetWare ODI (DOS, OS/2, Server) Driver
NDIS 2.0.1 (DOS, OS/2) Driver
NDIS 3.0 (WFW 3.11, NT 3.1 / 3.5 / 3.51 / 4.0, WINDOWS 95) Driver
Packet Driver
SCO UNIX Driver
LANTASTIC (5.0,6.0) Driver 
Configuration and Diagnostic Program
Network Operating System Auto-installation Program
RPL Boot ROM Installation Guide (\Server.odi, \WINNT)  

* Note

  No matter whether your computer system is operating under Plug & Play
  environment or not, it is not required to specify the configuration
  parameters in the PROTOCOL.INI and NET.CFG files. The driver provided
  by your Ethernet adapter will automatically fetch the configuration
  parameters from the adapter.


S_Hinweise:
Zip Installation Floppy (for 95, win3.x, and DOS)Version 5.2

S_Intern:
Zip Installation Floppy (for 95, win3.x, and DOS)Version 5.2


S_Hinweise:
RELEASE NOTES:

This version of the Iomega Drivers for the Jaz Jet PCI has been
tested on numerous computers with Windows NT version 3.51 and 4.0.




INSTALLATION INSTRUCTIONS FOR WINDOWS NT 3.51:

1. Copy the PCI-NT.EXE to a blank floppy diskette.  Execute the 
   self-extracting file (this will expand all the files).
2. From the Windows NT Program Manager, double-click on the "Main"
   group, then double-click on Windows NT Setup.
3. Select Options from the menu bar.
4. From the pull down menu, select "Add/Remove SCSI Adapters".
5. Click the "Add..." button, then click "Ok".
6. Use the Adapter List to scroll down to "Other".
7. Select your floppy disk drive (either A: or B:), then 
   click "Ok"
8. Select "Iomega Universal NT 3.51 SCSI HBA Driver", 
   then click on "Ok".
9. Click on "New" and then the "Continue" button.
10. You must shutdown and restart your computer for the adapter
    to be recognized by Winodows NT.


S_Hinweise:
README FILE
                        September 10, 1996
              Iomega Adapter Support under Windows NT
     
     Contents
     
     Section  #     Topic
           1   Installing Adapter Support under Windows NT
           2   Driver Installation from the Jaz Install Diskette
                    Under version 4.0
                    Under version 3.51
           3   Intallation for Native NT Adapter Drivers
                    Under version 4.0
                    Under version 3.51

S_Intern:
Windows NT Tools for Windows NT 3.51 and 4.0 Version 1.41


S_Hinweise:
README FILE
                           May 2, 1996
                  Zip Tools Software, Version 5.0
     
     Contents
     
     Section  #     Topic
           1   Using the 100MB Zip "tools" Disk
           2   Using the Guest Program
           3   Installing Zip Support on DOS-Only Systems
                    Iomega Driver for DOS
                    Zip Tools under DOS
           4   Installation Troubleshooting
                    Duplicate drive letters
                    No drive letter available for the Zip drive
                    Guest does not assign a drive letter to the
                         Zip drive
                    Other problems
                    Special Information for Users of 
                         Adaptec EZ-SCSI
           5   Electronic Manuals
           6   Cautions
           7   Pass-Through on the Parallel Port Zip Drive
                    Printers
                    Other Pass-Through Devices
           8   Optimizing Parallel Port Zip Drive Transfer Speed
                    Under DOS

S_Intern:
Iomega SCSI Device Drivers (DOS) Version 5.0


S_Bezeichnung:
Drv.Set v5.2 Zip, Jaz, Bernoulli (WIN95) -US

S_Hinweise:
Windows 95 Drivers for ZIP, Jaz, and Bernoulli Version 5.2

S_Intern:
Windows 95 Drivers for ZIP, Jaz, and Bernoulli Version 5.2


S_Hinweise:
please refer to the Bernoulli category
bitte vergleichen Sie die Bernoulli Kategorie

S_Intern:
please refer to the Bernoulli category
bitte vergleichen Sie die Bernoulli Kategorie


S_Bezeichnung:
Drv. Set. v2.11 905 TX Ethernet Adapters -US


S_Hinweise:
This file has network driver support for the DFE-500TX/DE-530
    Series PCI Ethernet adpater including:


S_Hinweise:
D-Link DE-220 Series 8/16-Bit ISA Ethernet Adapter


S_Bezeichnung:
Drv. Set.  ISA TokenLink Velocity 16/4 -US

S_Hinweise:
TokenDisk for the ISA TokenLink Velocity 16/4 . Please read License.txt carefully !!!


S_Hinweise:
D-Link DE-660 Ethernet PC Card Installation for DOS


S_Bezeichnung:
Drv.Set v5.0 Zip, Jaz, Bernoulli (WIN) -US


S_Bezeichnung:
Drv.Set Zip, Jaz, Bernoulli v5.0 (WIN) -US


S_Bezeichnung:
Drv. Set.v2.0Fast Etherlink ISA 10/100 Adapter -US

S_Hinweise:
V 2.0 Etherdisk for the Fast Etherlink ISA 10/100 adapter


S_Hinweise:
Driver diskette for PCI Fast Ethernet Adapter (Disk 1 of 2) Ver:4.1

S_Intern:
Driver diskette for PCI Fast Ethernet Adapter (Disk 1 of 2) Ver:4.1


S_Hinweise:
DE-620 Ethernet Card Windows 95 Driver Installation


S_Hinweise:
Driver diskette for PCI Fast Ethernet Adapter (Disk 2 of 2) Ver:4.1

S_Intern:
Driver diskette for PCI Fast Ethernet Adapter (Disk 2 of 2) Ver:4.1


S_Bezeichnung:
Drv. Set. Etherlink III PC Card Adapter -US

S_Hinweise:
Latest Etherdisk for Etherlink III PC Card Adapter


S_Hinweise:
Netware 3.11 server drvr DE-530CT/DFE-500TX


S_Hinweise:
README.DOC
                   Kingston Technology Company

                         Driver Diskette
                              for
                EtheRx IC PC Card Ethernet Adapter

                   Version 1.0 January 20, 1997

           Copyright (C) 1996-1997 Kingston Technology Company.
                        All rights reserved.

Table of Content
I.   Introduction
II.  Card and Socket Services, Enabler and Using Non-Kingston Drivers
III. Diskette Revision History
IV.  Diskette Contents
V.   Trouble Shooting Tips
VI.  Technical Support Information

S_Intern:
EtheRx IC PC Card Ethernet Adapter Drivers Ver:1.0


S_Hinweise:
D-Link DLKPCI Ethernet Adapter Installation
for Windows NT V4.0

S_Intern:
D-Link DLKPCI Ethernet Adapter Installation
		   for Windows NT V4.0


S_Hinweise:
README.DOC
                    Kingston Technology Company

                         Drivers Diskette
                               for
            EtheRx Plug and Play ISA Ethernet Adapter

                  Version 1.2  September 18, 1996

         Copyright (C) 1996 Kingston Technology Company.
                        All rights reserved.



INTRODUCTION

The driver programs on this diskette support Kingston's EtheRx Plug
and Play (PnP) ISA Ethernet Adapter.

Note: Before using your Kingston Drivers Diskette, make sure you make
a duplicate copy. Some of the software options will cause the contents
of the diskette to be modified. By making a copy of the diskette, you
will have an unmodified version available for future use.

S_Intern:
EtheRx PnP Driver Diskette Ver:1.2 with QStart


S_Hinweise:
Fast EtherLink III with dRMON SmartAgent Support


S_Hinweise:
D-Link DE-220 Family Ethernet Card
Windows NT v4.0/ 3.5x Driver Programs


S_Bezeichnung:
Drv. Set. v5.0 Etherdisk III ISA NIC -US

S_Hinweise:
Etherdisk III v 5.0 ISA NIC with dRMON Smart Agent Support


S_Hinweise:
D-Link DE-650CT Ethernet PC Card Installation for NT 4.0


S_Hinweise:
Kingston Technology Company


Introduction

This document is provided as a solution to fix Kingston's drivers
diskette version 3.2 Windows 95 installation problem. The cause 
of the problem is an erroneous installation file ( .inf file).

Problem:
You have updated the file from QStart, installed Kingsotn adapter  
and restart Windows 95.

Because incorrect information are in the inf file, 
Windows 95 will  prompt you with the following message....
(if the .inf file were correct, it should not come up with this message)

Please insert the disk labeled 'Kingston EtheRx
PCI Fast Ethernet/Ethernet adapter setup disk' and then click ok.

S_Intern:
Windows 95 fix for version 3.2 drivers diskettes


S_Hinweise:
Latest TokenDisk for the TokenLink III PC Card


S_Bezeichnung:
Drv. Set.v1.01 3C79X PCI FDDILink NIC -US

S_Hinweise:
Ver 1.0.1 FDDIDisk for the 3C79X PCI FDDILink NIC


S_Hinweise:
README.DOC
                 Kingston Technology Company

                         Drivers Diskette
                               for
           EtheRx Client PCI Ethernet Adapter

                  Version 1.0, April 24, 1997

         Copyright (C) 1997 Kingston Technology Company.
                        All rights reserved.



INTRODUCTION

The driver programs on the Drivers diskette support
various Network operating systems using
Kingston's EtheRx Client PCI Ethernet Adapter .


Note: Before using your Kingston Drivers Diskette, make sure you make
a duplicate copy. Some of the software options will cause the contents
of the diskette to be modified. By making a copy of the diskette, you
will have an unmodified version available for future use.


S_Hinweise:
KNE32xx ODI driver ver 2.12 can be loaded high

S_Intern:
KNE32xx ODI driver ver 2.12 can be loaded high


S_Hinweise:
KNE32xx Netware 4.x driver (NEISAV4.LAN when unzipped)

S_Intern:
KNE32xx Netware 4.x driver (NEISAV4.LAN when unzipped)


S_Hinweise:
README.DOC
                    Kingston Technology Company

                         Drivers Diskette
                               for
            EtheRx Plug and Play ISA Ethernet Adapter

                  Version 1.01  January 8, 1997

         Copyright (C) 1996-1997 Kingston Technology Company.
                        All rights reserved.



INTRODUCTION

The "kne20" is a DOS utility to set IOBASE and IRQ of Kingston EtheRx KNE20
PnP ISA Ethernet Adapter.  It configures one card at a time in the system.

Command Example:

kne20 ---> will display current IOBASE, IRQ and Node Address of the KNE20 Adapter.
kne20 io=300 ---> will set IOBASE to 0x300, the IRQ will NOT be changed.
kne20 irq=5  ---> will set IRQ to 5, the IOBASE will NOT be changed.
kne20 io=300 irq=5 ---> will set IOBASE to 0x300 and IRQ to 5.
kne20 pnp=1  ---> will set KNE20 to PnP mode
kne20 pnp=0  ---> will set KNE20 to Non-PnP mode
kne20 ? or kne20 /? ---> will display command information

S_Intern:
Quick setup software for KNE20 PNP adapter.


S_Hinweise:
Inf voice file for Hayes Optima 336B V.34 + Fax + Voice

S_Intern:
Inf voice file for Hayes Optima 336B V.34 + Fax + Voice


S_Hinweise:
;Install.doc 
;To fix an existing Netware Client32 for Windows95 setup problem
;for KNE40/KNE100TX PCI Ethernet adapter
;
;Copyright 1996, Kingston Technology Company
;
;11.7.96

1. Make a backup copy of the Netware Client32 for Windows95 Setup Disk 1.
USE THE BACKUP COPY FOR INSTALLATION.

2. Copy KTC100X.LAN, KTC100X.INF and NWSETUP.INI onto the backup disk.
This will replace the existing NWSETUP.INI.

3. Boot up Windows95. Open "My Computer" then "Control Panel" then "Network". 
Remove ALL existing network components. Click "OK" to close. 
When asked to reboot Windows95, answer "NO".


S_Hinweise:
; Microsoft Windows Modem Setup File
; Inf file for Hayes PCMCIA 336  
; Manufacturer: Hayes

S_Intern:
; Microsoft Windows Modem Setup File
; Inf file for Hayes PCMCIA 336  
; Manufacturer: Hayes


S_Hinweise:
Kingston Technology Company

                      INSTALLATION GUIDE

           Novell Client 32 ODI driver for Windows 95 
          for EtheRx KNE20 PnP ISA Ethernet Adapter

          Copyright (C) 1997 Kingston Technology Company.
                     All rights reserved.


Driver Installation Procedure:

This installation procedure assumes WIN 95 is properly installed on 
your computer.

      
Note:
This installation instruction assumes that your EtheRx PnP adapter is
in its native PnP mode. If your adapter has its PnP mode disabled,
it will function like a legacy Novell NE2000 Ethernet adapter.
In this case, Windows 95 might not autodetect the presence of the
adapter. You may have to manually add the adapter by opening
"Control Panel" then "Add New Hardware" and select
"Novell/Anthem NE2000 compatible".

S_Intern:
Client 32 driver and supporting files for Windows 95.


S_Hinweise:
;Microsoft Windows Modem Setup File
;Inf for Hayes Accura 336B PNP ACIx modems
;Manufacturer: Hayes

S_Intern:
;Microsoft Windows Modem Setup File
;Inf for Hayes Accura 336B PNP ACIx modems
;Manufacturer: Hayes


S_Hinweise:
Modem Firmware and Utilities for the 3C562-TP LAN&Modem PC-Card


S_Hinweise:
Kingston Technology Company

                    INSTALLATION GUIDE

          Novell Netware Client 32 ver. 2.1 ODI Driver for
                      Windows 3.1 and DOS
     for EtheRx PCI Fast Ethernet/Ethernet Adapter Family

          Copyright (C) 1996-1997 Kingston Technology Company.
                        All rights reserved.



Introduction:

This installation guide provides instructions for installing the
Novell Client 32 ODI driver.


Driver Installation Procedure:

The self-extracting file should have been decompressed to a floppy by
typing the following:

                C32_W31 A:

       This will unzip the file into the floppy diskette in your A: drive.
       This floppy is referred as driver diskette in the following sections.


S_Hinweise:
; Windows Modem Setup File
; Copyright 1994 Microsoft Corp.
; Inf file for Hayes Accura 336 Version 7.x
; FF for UNIMODEMD8929E19 on 9/09/96 no match dfc
; Added verbose result codes 9/09/96 dfc
; Manufacturer:   Hayes

S_Intern:
; Windows Modem Setup File
; Copyright 1994 Microsoft Corp.
; Inf file for Hayes Accura 336 Version 7.x
; FF for UNIMODEMD8929E19 on 9/09/96 no match dfc
; Added verbose result codes 9/09/96 dfc
; Manufacturer:   Hayes


S_Hinweise:
Modem Firmware and Utilities for the 3C562B Lan & Modem PC-Card


S_Hinweise:
Modem Firmware and Utilities for the 3C562C LAN & Modem PC-Card


S_Bezeichnung:
INF file ACCURA 288 PNP Internal ACIx -US

S_Hinweise:
;Microsoft Windows Modem Setup File
;Inf for Hayes Accura 288B PNP Internal ACIx modems
;Manufacturer: Hayes

S_Intern:
;Microsoft Windows Modem Setup File
;Inf for Hayes Accura 288B PNP Internal ACIx modems
;Manufacturer: Hayes


S_Hinweise:
;Microsoft Windows Modem Setup File
;Inf for Hayes Accura 336 ACIV External 
;Manufacturer: Hayes

S_Intern:
;Microsoft Windows Modem Setup File
;Inf for Hayes Accura 336 ACIV External 
;Manufacturer: Hayes


S_Hinweise:
ATM Adapters OC-6151, OC-6152, RapidFire ATM PCI 155 Windows 3.11 NDIS 3.0 Driver
Includes AIW for this driver only Version 3.46


S_Hinweise:
; name and version number:@(#)ltmodem.inf	1.14*/
; date of get: 		  30 Dec 1996 14:39:03*/
; date of delta:	  23 Dec 1996 08:54:45*/
;
; Windows Modem Setup File
; Copyright 1996 LT
;
; Manufacturer:  LT Microelectronics


S_Hinweise:
LAN/Modem GoCard OC-2232, GoCard ETH/Modem 336 Setup Disk Version V3.4


S_Hinweise:
Subject: MultiTech WIN95 INF file
Date: Friday, August 2, 1996 

Attached is a MultiTech INF file for the Internals, PCMCIA, MU, and
ZDX models, International and domestic.

S_Intern:
Subject: MultiTech WIN95 INF file
Date: Friday, August 2, 1996 

Attached is a MultiTech INF file for the Internals, PCMCIA, MU, and
ZDX models, International and domestic.


S_Hinweise:
FAXserve Modem Selection Update to match the 
September 1996 FAXserve 3.01a Certified Device List

S_Intern:
FAXserve Modem Selection Update to match the 
                      September 1996 FAXserve 3.01a Certified Device List


S_Hinweise:
Fast Ethernet Adapter OC-2325 PCI/II 10/100 Flash RPL Version V1.0


S_Hinweise:
Notes on ISI 608 Intelligent Seriel Interface driver for Windows 95


S_Hinweise:
Ethernet Adapter OC-218x PCI/II 10 Flash RPL Version V1.0


S_Hinweise:
Fast Ethernet Adapter OC-2335 MCA 10/100 Flash RPL Version V1.1


S_Bezeichnung:
Drv. Winsock 2.0 v2.07 Rel. 2 (WIN NT) - US

S_Hinweise:
File: SPIV207.EXE 
Date: 03/25/97
Size: 93,308
Description: ANA-59x0 Winsock 2.0 Service Provider Interface (v2.07 Release 2) for Windows NT 4.0. 
NOTE: This file is for Winsock 2.0 developers only and is not intended for end users.


S_Hinweise:
File: SPIV40A.EXE 
Date: 02/20/97
Size: 231,995
Description: ANA-59x0 Winsock 2.0 Service Provider Interface (v4.0) for Windows NT 4.0. This driver adds Winsock 2.0
support to the Adaptec ATM Driver set v4.0.
NOTE: This file is for Winsock 2.0 developers only and is not intended for end users.


S_Bezeichnung:
Drv. ANA-59x0 base, CIP, LANE (WIN NT) - US

S_Hinweise:
File: ATMNT207.EXE 
Date: 02/12/97
Size: 1,273,204
Description: ANA-59x0 base, CIP, and LANE drivers and utilities (v2.07) for Windows NT (v3.5x and v4.0).


S_Hinweise:
RouteFinder, Two Port Remote Access Server
Router Firmware, V 2.01


S_Bezeichnung:
Drv. ANA-59x0 LANE client v4.0a (WIN NT) - US

S_Hinweise:
File: ATMNT40a.EXE 
Date: 02/20/97
Size: 879,574
Description: ANA-59x0 LANE client driver and utilities (v4.0a) for Windows NT (v3.5x and v4.0).


S_Hinweise:
RouteFinder200, Two Port Remote Access Server
Router Firmware, V 2.01


S_Hinweise:
File: LANE95V2.EXE
Date: 02/06/97
Size: 327,994
Description: ANA-59x0 LANE device driver (v2.0) for Windows 95 installation disk 1 of 1. Replaces ALANE95.EXE


S_Hinweise:
Token-Ring Adapter OC-3118 ISA Setup Disk Version D29.0


S_Bezeichnung:
Upd. Administrative Utility v5.12.04 (OS/2) -US

S_Hinweise:
README.TXT 
Last Revised 10/8/96 
   
cc:Mail Administrative Utilities Release 5.12.04
   
This README describes the latest updates to the cc:Mail  
Administrative Utilities
Only one program has been changed - CHKSTAT.
 
     NOTE     The  OS/2 release includes a "2" in the file name; for
          example, CHKSTAT2.EXE. 


About ADMIN 5.12.04
-------------------     
        Changes were made to correct a problem where an entry could be dropped from 
        the ##Directory Updates propagation list, if there were 200 or more entries,
        and the entry's name was changed from ADMIN. Messages will now be
        displayed at ADMIN startup, if the ##DIRECTORY UPDATES bboard was recreated
        because it was missing.  If the default propagation type in the ADE profile menu
        is changed or updated, upon exit from this menu, messages are now displayed,
        telling that updating the propagation list 'may take several minutes'.
        a new log file 'DIRPROP.LOG' will now be created in the PO data directory if
        either of previous two conditions occur. The log file (DIRPROP.LOG) will show 
        any additions or deletions to the ##DIRECTORY UPDATES propagation list based 
        on each directory entry's propagations bit settings.

S_Intern:
Administrative Utility Update 5.12.04. OS/2 Version Changes were made to correct a problem where an entry could be dropped from the ##Directory Updates propagation list


S_Hinweise:
PowerChute v4.2 USERS GUIDE in Portable Document Format (PDF)


S_Hinweise:
Windows NT Upgrades 

PowerChute plus:  Windows NT Upgrades 

PowerChute plus      setupex.exe v5.0 
PowerChute plus installer for Windows NT (Intel only); Includes documentation (installation guide, release notes and manual)


S_Bezeichnung:
Upd. Administrative Utility v5.12.04 (DOS) -US

S_Intern:
Administrative Utility Update 5.12.04. DOS Version. Changes were made to correct a problem where an entry could be dropped from the ##Directory Updates propagation list


S_Hinweise:
WebAgent Installation Guide install.pdf 
How to install WebAgent for MS IIS in PortableDocument Format (PDF)


S_Hinweise:
WebAgent Installation Guide   install2.pdf   How to install WebAgent for NS Enterprise & FastTrack Servers in Portable Document Format (PDF)


S_Hinweise:
WebAgent   wamsiis.exe  v1.0 (beta) Allows monitoring of APC Smart-UPS & Matrix-UPS using a Web browser;
for Microsoft IIS 1.x, 2.x, 3.x


S_Bezeichnung:
Plug-In WebAgent v1.0beta (Netscape-NT) - US

S_Hinweise:
PowerChute plus Plug-Ins: WebAgent 

WebAgent  wanse20.exe v1.0 (beta) Allows monitoring of APC Smart-UPS & Matrix-UPS using a Web browser;
for Netscape Enterprise Server 2.0 & FastTrack Server 2.0


S_Bezeichnung:
Plug-In WebAlert v1.0 PC4.2.5 (Enterprise-NT) - US

S_Hinweise:
WebAlert                   setupex.exe                 v1.0 
                                       Allows client notification when Webserver APC UPS goes
                                       on-battery;
                                       for Netscape Enterprise Server 2.0
                                       requires PowerChute plus v4.2.5


S_Bezeichnung:
Plug-In WebAlert v1.0 PC5.0 (Commerce-NT) - US

S_Hinweise:
WebAlert                   setupex.exe                 v1.0 
                                       Allows client notification when Webserver APC UPS goes
                                       on-battery;
                                       for Netscape Commerce Server 1.1
                                       requires PowerChute plus v5.0


S_Bezeichnung:
Plug-In WebAlert v1.0 PC4.2.5 (FastTr2.0-NT) - US

S_Hinweise:
WebAlert                   setupex.exe                 v1.0 
                                       Allows client notification when Webserver APC UPS goes
                                       on-battery;
                                       for Netscape FastTrack Server 2.0
                                       requires PowerChute plus v4.2.5


S_Hinweise:
File: ANA6944A.EXE 
Date: 03/28/97 
Size: 436,762 
Description: Netware & NT drivers for the ANA6944A Multi-Port ethernet adapter.


S_Hinweise:
Token-Ring Adapter OC-3137 PCI Setup Disk Version D29.0


S_Hinweise:
File: DURA_NT.EXE  
Date: 02/14/97 
Size: 192,018
Description: ANA-6911 DuraLink driver for Windows NT 3.5


S_Bezeichnung:
CC:Mail Adminitrative Utilities v5.12 (DOS) -US

S_Hinweise:
README.TXT 
Last Revised 5/3/95 
   
cc:Mail Administrative Utilities Release 5.12 
   
This README describes the latest updates to the cc:Mail  
Administrative Utilities that were not included in the Lotus  
cc:Mail Administrative Utilities Manual Release 5.1. 
 
The Administrative Utilities include DOS and OS/2 releases of the
following programs: 

     *  ADMIN.EXE
     *  CHKSTAT.EXE
     *  RECLAIM.EXE
     *  NPODOWN.EXE
     *  ANALYZE.EXE
     *  DIALIN.EXE 
     *  CCSAVE.EXE.  

     NOTE      OS/2 releases include a "2" in the file name; for
          example, CHKSTAT2.EXE. 

If you want to use the OS/2 administrative utilities, and don't
currently have access to them, please contact cc:Mail Technical
Support for information on obtaining the necessary files from the BBS.

S_Intern:
Admin and Admin Utilities, Rel 5.12, plus Analyze technote


S_Hinweise:
File: DURA_NW.EXE 
Date: 03/11/97 
Size: 134,486 
Description: ANA-6911 DuraLink Driver for Novell Netware


S_Hinweise:
Title:	The AIOCHECK.NLM Utility
*Product Area:	Notes
*Product Release:	
*Resource Type:	Tool/Utilities
Number:	2174
Last Update:	10/11/95
Circulation:	Public - Faxable
	
Overview of Resource:

S_Intern:
Information about the AIOCHECK.NLM Utility


S_Hinweise:
***  Resolving Analyze Errors: cc:Mail LAN-Based Post
Offices  ***

Table of contents
============
Purpose
Background
Overview -- Important Basics
About Running ANALYZE on a "Live" Post Office
Contacting Lotus Technical Support
Example Problem and Resolution
ANALYZE 5.12 Errors and Steps to Resolve Them
Appendix A -- Calculating Conventional Memory Requirement for
CHKSTAT with DIAGNOSTICS/M
Appendix B -- About ANALYZE 5.10 Differences


S_Hinweise:
LAN/Modem GoCard OC-3232, GoCard TRN/Modem 336 Setup Disk Version V28.4


S_Bezeichnung:
CC:Mail Configuration Utility v1.0 (DOS) -US

S_Hinweise:
--------------------------------------------------------------------------
CFGUTIL.EXE
Lotus cc:Mail Configuration file utility
v.1.0, M. Berkowitz 07-Oct-96
--------------------------------------------------------------------------



Purpose:
--------
CFGUTIL is a command-line DOS utility for listing, showing or deleting
records from a cc:Mail configuration file, usually named "ccmail.cfg."



Usage:
------
Show: CFGUTIL [/s [/g <group name> /t ]
[/o ][<configuration filename>]
Delete: CFGUTIL /d /g <group name> /t
[/o ][<configuration filename>]
List: CFGUTIL /l [/o ][<configuration filename>]
Help: CFGUTIL /? [/o ]


S_Hinweise:
EMXSA.EXE 
Date: 08/08/96
Size: 397,621
Description: 
Universal Driver Set for 
ANA-6510/TX 
ANA-6511/TX
ANA-6511/TXC
ANA-6511/T4
ANA-6511/T4C
ANA-6710/TX
ANA-6711/TX
ANA-6711/TXC
ANA-6711/T4
ANA-6711/T4C
Ethernet Controller


S_Bezeichnung:
cc:Mail Administrative Utilities v8.0 (DOS) -US

S_Hinweise:
Lotus cc:Mail Release 8.0 Administrative Utilities
     ====================================================
(c) Copyright 1997 cc:Mail Inc., a wholly owned subsidiary of
Lotus Development Corporation.

This README contains information about the files included in 
DBTOOLS.ZIP and how to install them.

.  DBTOOLS.ZIP contains the following files:

    .  The Release 8.0 administrative utilities from the 
       Release 8 CD-ROM
 
    .  READMEA.TXT, which contains late-breaking information about
       Release 8.0 ADMIN and the administrative utilities 

. To install the administrative utilities, unzip DBTOOLS.ZIP in the
  directory that contains your existing version of the utilities.
          
NOTE This overwrites all the existing files in the directory and
     copies READMEA.TXT in the directory.


S_Bezeichnung:
Plug-In WebAlert v1.0 PC4.2.5 (Commerce-NT) - US

S_Hinweise:
WebAlert                   setupex.exe                        v1.0 
                                       Allows client notification when Webserver APC UPS goes
                                       on-battery;
                                       for Netscape Commerce Server 1.1
                                       requires PowerChute plus v4.2.5


S_Bezeichnung:
Plug-In WebAlert v1.0 PC4.2.5 (IIS1-NT) - US

S_Hinweise:
WebAlert                   setupex.exe          v1.0 
                                       Allows client notification when Webserver APC UPS goes
                                       on-battery;
                                       for Microsoft Internet Information Server 1.0
                                       requires PowerChute plus v4.2.5


S_Bezeichnung:
Plug-In WebAlert v1.0 PC4.2.5 (IIS2-NT) - US

S_Hinweise:
WebAlert                   setupex.exe            v1.0 
                                       Allows client notification when Webserver APC UPS goes
                                       on-battery;
                                       for Microsoft Internet Information Server 2.0
                                       requires PowerChute plus v4.2.5


S_Hinweise:
Lotus Notes Connect for X.25 on NT - Release 3.30
	
			Release Notes

============================================================================
Read these notes BEFORE installing this product.


WHAT'S NEW IN THIS RELEASE

This version of Lotus Notes Connect for X.25 runs under 
Lotus Notes(R) Release 3.30 for Windows NT(TM) Version 3.5 
and includes support for the following: 
	
	* Up to 32 users

	* Up to eight physical ports

	* High-speed links via support for the Eicon S51 network card 

Note that Lotus Notes Connect for X.25 on NT supports the Notes server 
only and does not support the Eicon OSI Gateway.


S_Hinweise:
Release Note on U-336RE Version 1.05     March 27, 1997

Change Model name:
    Change the model name "U-288RE" to "U-336RE". The old hardware of        U-288RE still can update firmware using firmware of U-336RE.


S_Hinweise:
Release Notes

========================================================================
Read these notes BEFORE installing this product.


WHAT'S NEW IN THIS RELEASE

Lotus Notes Connect for X.25 Release 3.33 includes the following
new features:

	* Support for up to 32 users on OS/2 systems
	* Support for up to 20 users on Windows clients
	* Support for up to eight physical ports

Note that Lotus Notes Connect for X.25 supports OS/2 clients and 
servers as well as Windows clients. 


INSTALLATION NOTES

The files installed by this product are as follows:

Notes Data Directory:
X25NAMES.NTF    X.25 Connection document added to 
		Name & Address Book
X25DOC.NSF      X.25 Documentation in Notes database format


S_Hinweise:
PowerChute plus         pcpls423.exe                  v4.2.3       PowerChute plus installer file for Windows 3.11/Windows 95


S_Hinweise:
Lotus Notes Connect for X.25 Release 4
March 1996


REQUIREMENTS

To run this version of the Lotus Notes Connect for X.25 driver, 
you need the following revisions of software:

* Lotus Notes Release 4 

* Eicon software for Windows NT platform
  - Version 3 Release 3 of WAN Services from Eicon 

* Eicon Software for OS/2 platform
  - Version 3 Release 1a or later

To run Lotus Notes Connect for X.25 driver, you need the
ECBIOS.DLL file for Windows NT from Eicon Technologies. 
The file is dated 11/29/95 and the file size is 11,280 bytes.   

The distribution disk contains the following files for 
Lotus Notes Connect for X.25 on OS/2:

S_Intern:
Connect for X.25 Release 4.0 for NT/Intel


S_Hinweise:
PowerChute plus      pcpls424.exe        v4.2.4 
                                     PowerChute plus executable installer for NetWare
                                     3.11, 3.12, 4.0, 4.1, 4.11


S_Hinweise:
Release Note on U-336RE Version 1.05     March 27, 1997


S_Hinweise:
Release Note on Elite 2864 Release Version 1.15   Jan. 20, 1997


S_Hinweise:
Release Note on Elite 2864 Release Version 1.16  Feb. 14, 1997


S_Bezeichnung:
INF file for ELITE2864i,OMNI (WIN95/NT) -US

S_Hinweise:
** INF files for Elite2864i, Omni TA128, omni.net ** 
European Version, 1997/01/14


S_Hinweise:
Release Note on  OmniTA 128 Version 2.03               Apr, 10, 1997


S_Hinweise:
Installation programm for Elite 2864I CAPI driver


S_Hinweise:
Network Management OC-3840 Token-Ring Hub Manager Hub Manager for HP OpenView Version D2.3


S_Hinweise:
Token-Ring Internetworking DOS-based Remote Bridge Version 4.21


S_Hinweise:
Token-Ring Internetworking DOS-based Local Bridge Version 4.23


S_Hinweise:
Modemdateien fuer Lotus Notes:

TELEJET 14400
TELEJET 28800 V.FastClass
TELEJET 28800V (V.34)
TELEJET 33600 (V.34+)

Stand: 01.01.97 MR

S_Intern:
Modemdateien fuer Lotus Notes:

TELEJET 14400
TELEJET 28800 V.FastClass
TELEJET 28800V (V.34)
TELEJET 33600 (V.34+)

Stand: 01.01.97 MR


S_Hinweise:
Token-Ring Hub OC-367x Controlled Attachment Module (CAM) Program Disk Version V3.0


S_Hinweise:
Token-Ring Hub OC-3610 Controlled Access Unit (CAU) Program Disk Version V3.0


S_Hinweise:
Network Management OC-3882 Token-Ring Manager Token-Ring Manager for Novell ManageWise Version D1.0


S_Hinweise:
Supported CAPI versions
CAPI 2.0 is supported by CAPI2032.DLL
CAPI 1.1 is supported by CAPI32.DLL

No 16 Bit Applications are supported by CAPI****.DLL

For programing details please refer to the CAPI 2.0/1.1
specification.

We suggest to use CAPI 2.0 which is based on DSS1. It will
replace CAPI V1.1 which was designed for the German national
ISDN.


S_Hinweise:
ATM Adapters OC-6151, OC-6152, RapidFire ATM PCI 155 Setup Disk v2.20 CellDriver Release 2.20: Includes drivers for Windows 95, Windows NT and Novell Netware. All drivers include support for LAN Emulation (Ethernet & Token-Ring)


S_Hinweise:
GoCard OC-7111 GoCard Modem 288 Windows 95 Driver


S_Hinweise:
OC-8100 CrossFire Token-Ring Switch Program Disk  Version D2.33 CrossFire Token-Ring Switch Program Disk  Version D2.33


S_Hinweise:
CAPI-Kit for CAPI V1.1 and V2.0

		          Preliminary Version

    The CAPI-Kit for CAPI V1.1. and V2.0 is in preparation. This is a
    preliminary version with the following restrictions:

    a) only for C and Pascal,

    b) only for DOS and Windows 3.11,

    c) not for tina-d and tina-ds/V7,
    
    d) for SICC-PC only CAPI V1.1 is supported,

    e) ISDN firmware versions must be at least V4.322, SICC-E firmware
       version must be at least V1.01A.


S_Hinweise:
OC-8200 CrossFire Ethernet Switch Program Disk Version V9.1.1


S_Hinweise:
Network Management OC-8920 Ethernet Switch Manager Switch Manager for HP OpenView Version V1.0


S_Hinweise:
Lotus Notes Connect for X.25 Release 4.1
April 1996


REQUIREMENTS

To run this version of the Lotus Notes Connect for X.25 driver, 
you need the following revisions of software:

* Lotus Notes Release 4.1

* Eicon software for the Windows NT platform
  - Version 3 Release 3 of WAN Services from Eicon 

* Eicon software for the DEC Alpha NT platform
  - Version 3 Release 3 of WAN Services from Eicon

* Eicon software for the OS/2 platform
  - Version 3 Release 1a or later

To run Lotus Notes Connect for X.25 driver, you need the
ECBIOS.DLL file for Windows NT from Eicon Technologies. 
The file is dated 11/29/95 and the file size is 11,280 bytes.

The distribution disk contains the following files for 
Lotus Notes Connect for X.25 on Windows NT:

S_Intern:
Connect for X.25 Release 4.1 for NT/Intel


S_Hinweise:
Lotus Notes Connect for X.25 Release 4.5
December 1996


REQUIREMENTS

To run this version of the Lotus Notes Connect for X.25 driver, 
you need the following revisions of software:

* Lotus Notes Release 4.5

* For the NT 3.5.1 on either Intel or DEC Alpha machines
  - Version 3 Release 3 of WAN Services from Eicon 

* For NT 4.0 either Intel or DEC Alpha machines
  - NT 4.0 includes all necessary drivers

* For OS/2 Warp use either of the following
  - Communications Server Connect for OS/2 Warp from Eicon

To run Lotus Notes Connect for X.25 driver, you need the
ECBIOS.DLL file for NT/Intel from Eicon Technologies. 
The file is dated 11/29/95 and the file size is 11,280 bytes.
Newer versions will also work.

The distribution disk contains the following files for 
Lotus Notes Connect for X.25 on NT/Intel:

S_Intern:
Connect for X.25 Release 4.5 for NT/Intel


S_Hinweise:
---------------
                        Lotus NotesPeek
                        ---------------
                        
This is the README for Lotus NotesPeek, a browser for Notes data.  The 
software agreement for NotesPeek is at the end of this file.


WHAT IS NOTESPEEK?
------------------

NotesPeek is a browser for Notes data.  It was written for the use of 
technical Notes users who want to see a more raw view of their Notes 
databases than the Notes client provides.  NotesPeek presents the
information in Notes databases as it is available through the Notes API.

NotesPeek is based on a containment hierarchy: Notes servers have 
databases, databases have documents, documents have items, etc.  For the 
most part, this containment hierarchy is that presented by the API.  One 
exception is that NotesPeek presents object data as being contained within 
object items, when they are not.

Selecting a line in the tree view on the left will display information 
about that line in the text view on the right.

NotesPeek displays almost all of the data available through the Notes 
API.  There is some data available at the database level that is not yet 
shown (full-text index information, for example).  Where data cannot be 
interpreted because its format is not documented, it is displayed as a hex 
dump.

S_Intern:
NotesPeek 1.3: A Tool for Viewing Notes Databases


S_Hinweise:
Lotus Mail Exchange Facility Release 2.01 contains improved versions
of the Mail Exchange and Directory Exchange components of the product.

The purpose of this release is to provide an immediate solution to some
problems a few customers have reported and to provide features some
customers have requested to help them successfully operate Lotus Mai
l Exchange Facility (LMEF).

This release of LMEF requires Notes versions 2.1


S_Hinweise:
Release Notes for NotesSQL release 1.1
December 2, 1994
               

Changes since release 1.0


1. Configuration dialog

Edit controls are wider and handle the full widths of allowed values.


2. NotesSQL ODBC driver

The driver consists of two DLLs.
The DLLs are called NOTESSQL.DLL and NSQLODBC.DLL.

Users of Notes 3.0c must have the directory containing Notes
executables on the DOS path.

Users of Notes version 3.2 do not need to have Notes on the DOS path.


Fixed use of timestamp values in parameterized query.

Driver does not allow two fields with the same name in CREATE TABLE.

Driver correctly reports fields with the same name in different tables:
SQLColumns with wild card in column name input and no table name.

Update or insert of timestamp value to Time field fixed.


S_Hinweise:
(c) 1996 Lotus Development Corporation.  All rights reserved.
This software is subject to the Lotus Notes C++ API Software Development
Kit Agreement (in the apilicns.txt file in the "notescpp" directory of
the CD-ROM toolkit, or, if downloaded from the World Wide Web, in the
toolkit root directory), Restricted Rights for U.S. government users, and 
applicable export regulations.

***************************************************************************

                    Lotus Notes C++ API Release 4.0

                   Platform-Specific Information and
                   Installation Instructions for
                   Windows 3.1, Windows NT, Digital
                   Alpha NT, Windows 95 and OS/2

***************************************************************************

S_Intern:
PC versions of the Notes C++ API Release 4.0


S_Hinweise:
=======================================================================
                     NotesSQL 2.01 
                 ODBC Driver for Notes
=======================================================================

(c) 1996 Lotus Development Corporation.  All rights reserved.
This software is subject to the Lotus Notessql Software Development
Kit Agreement.  Restricted Rights for U.S. government users, and 
applicable export regulations.


November 1996

For up to date information, see http://www.lotus.com
For more information, see NotesSQL.NSF. 

To use NotesSQL, you'll need a Notes client for Windows 95 
or NT (32-bit).
To install, run Setup.exe.

S_Intern:
NotesSQL 2.01 - Windows 32-bit Lotus Notes ODBC Driver


S_Hinweise:
Release Notes for  Version 3.7.1 (*.PCL format)

S_Intern:
Release Notes for  Version 3.7.1 (*.PCL format)


S_Hinweise:
Install.lst File for Notes 4.13 Node install

S_Intern:
Install.lst File for Notes 4.13 Node install


S_Hinweise:
Lotus cc:Mail cc:Regmod for DB6
                    ===============================

(c) Copyright 1997 cc:Mail Inc., a wholly owned subsidiary of
Lotus Development Corporation.

Lotus is a registered trademark of Lotus Development Corporation.
cc:Mail is a trademark of cc:Mail, Inc. Other products and company 
names mentioned herein may be the trademarks or registered trademarks
of their respective owners.

This readme file contains important information about cc:Mail 
ccReg6. Read this before you start using cc:Mail ccReg6.

Table of Contents
=================
cc:Mail ccReg6
Support Services


cc:Mail ccReg6
==============
The ccReg6 utility makes all necessary changes to a Win95 or NT
registry to support cc:Mail.  ccReg6 makes the same changes that
ccRegmod does. Begining with the software contained on the
cc:Mail Release 8 Advanced System Pack, ccRegmod will be invoked
each time an application runs on a Win32 platform.  If you are
using the software contained on the Release 8 CD-ROM, there is no
need to run ccReg6 on any of your workstations.

S_Intern:
Required Windows NT and 95 Registry Modifier Program. Please see technotes (CCREGMOD2.LWP - a WordPro 97 file or CCREGMOD2.TXT) which are included in the zipfile for further information


S_Hinweise:
Overview of Resource:

Network file server administrators may notice that the network utilization
increases when using LN:DI MSS 2.5 with the MSS File Pipes protocol enabled.

This is a known issue with LNDI MSS 2.5.  The attached file will help reduce
the network utilization.

Instruction on How to Use:

Note:  This update file is intended for MSS 2.5.

1.  Shutdown the MSS Server program.

2.  Rename the old IMNET_2S.DLL file in the MSS program directory.  
    (e.g.  REN IMNET_2S.DLL IMNET_2S.OLD)  

3.  Detach the updated IMNET_2S.DLL file from this document and copy it into
the MSS program directory.

S_Intern:
Updated IMNET_2S.DLL for Increased Network Utilization with MSS 2.5


S_Hinweise:
Notes V3.35 SYM Files For Use with RIP File Annotator

S_Intern:
Notes V3.35 SYM Files For Use with RIP File Annotator


S_Hinweise:
Win16 Workstation International rel 4.5 -> rel 4.51

S_Intern:
Win16 Workstation International rel 4.5 -> rel 4.51


S_Hinweise:
W32 Intel Server International for Release 4.5 -> 4.5a

S_Intern:
W32 Intel Server International for Release 4.5 -> 4.5a


S_Bezeichnung:
Update Workstation Domestic v4.51 (WIN95/NT) -US

S_Hinweise:
Win32 Workstation Domestic rel 4.5a -> rel 4.51

S_Intern:
Win32 Workstation Domestic rel 4.5a -> rel 4.51


S_Bezeichnung:
Update Workstation Int. v4.51 (WIN95/NT) -US

S_Hinweise:
Win32 Workstation International rel 4.5a -> rel 4.51

S_Intern:
Win32 Workstation International rel 4.5a -> rel 4.51


S_Hinweise:
Lotus cc:Mail for Windows Background Release 6.01
     =================================================


This file contains important late-breaking information that is
not contained in the documentation.

Table of Contents
=================
Installation
Lotus cc:Mail for Windows Background Release 6.01 Changes


Installation
============
1. Rename the existing CCBKGRND.EXE to CCBKGRND.OLD in the
   ccmobile program directory.

2. Copy CCBKGRND.EXE included in the CCBKGRND.ZIP to 
   the ccmobile program directory.

S_Intern:
Lotus cc:Mail for Windows Background Release 6.01.00


S_Hinweise:
IIS 3.0 : Active Server Pages (US English)


S_Hinweise:
IIS 3.0 : Crystal Reports 4.5 for IIS (German)


S_Hinweise:
BList lists Notes Servers in the Netware Bindery

S_Intern:
BList lists Notes Servers in the Netware Bindery


S_Hinweise:
The Lotus Notes Hide Design Tool

This document describes a Hide Design tool that enhances the
application design protection available in Notes 3.x. 

About the Hide Design tool

The Hide Design tool improves on existing hide design
features by allowing a database designer to more securely
protect the design of a database so that users do not have
access to the design of a Notes application. The tool takes a
source database that you specify and creates a destination
database with all formulas and formula comments hidden from
view. The only formulas that are displayed are Full Text query
macro formulas because these formulas will not execute if they
are hidden.

Users of hidden databases do not need to install a new version
of Notes client software. The Hide Design tool works for any
Notes database residing on a server running Notes version 2.0 or
greater. A user running Notes client server version 2.0 or
greater can access a hidden database. Likewise, the protection
provided by the Hide Design tool does not depend on a new
version of Notes and cannot be subverted by using an old version.


S_Hinweise:
IIS 3.0 : Crystal Reports 4.5 for IIS (US English)


S_Hinweise:
tina+NT

Readme for RAS through NDIS/TAPI Miniport Driver with tina-dd
under Windows NT 3.5/3.51/4.0



There are two ways to connect a Windows NT computer to ISDN:

- Integration via NDIS-Miniport driver (this floppy)
- Integration via serial modem driver and COM-Port (a different
  product, please contact Stollmann for further information)

This floppy contains the software necessary for the integration
via NDIS/TAPI Miniport. It supports one/two B-channel with up
to 64.000 bps. For support of more B-channels, Terminaladaptors
or X.25-PC cards call Stollmann E+V at ++49-40-890 88-0.

This floppy contains the following files:

- fw??1tr6.loc          Loadable Firmware with D-channel proto-
                        col 1TR6 for tina-??
- fw??dss1.loc          Loadable Firmware with D-channel
                        protocol DSS1 for tina-??
- oemsetnt.inf          Installation script for NT
- readme.txt            This text
- tisup.exe             transmittes registry and eventlog
                        entries into support file
- tiwmac.sys            NDIS/TAPI Miniport driver
- tiwmmsg.dll           DLL for display of eventlogs
- tiwmac.pmc            Chart settings for Performance Monitor


S_Bezeichnung:
Drv. 32-Bit ODI-Support f. Novell Clients

S_Hinweise:
This TokenExpress PRO adapter 32-bit ODI driver TPRO.LAN v2.01 complies to the Novell 3.3 specification. This driver can be used for
32-bit ODI driver support for Novell's Client 32 for DOS/Windows 3.1 and Novell's Client 32 for Windows 95.


S_Hinweise:
OS/2 Server Domestic rel 4.5 -> rel 4.51

S_Intern:
OS/2 Server Domestic rel 4.5 -> rel 4.51


S_Hinweise:
IIS 3.0 : NetShow On-Demand Player (German)


S_Hinweise:
Stollmann tina-pp (internal)

Readme for ISDN PC card under Windows 95
Copyright Stollmann E+V GmbH

History
15.02.97  1st release (Beta 9)
04.03.97  Update for Beta 10
19.03.97  Update
25.03.97  Update

Stollmann tina-pp (internal) driver for Windows 95 versions:
Beta 9    1st Release
Beta 10   2nd Release
Rel  12   3rd Release
Rel  13   4th Release

1.      General

There are two ways to integrate the tina-pp card in a
Windows 95 PC:
- Integration via NDIS-WAN-Miniport driver
- Integration via CAPI
Both are supported in parallel by the drivers of this disk.


***************************************************************
Release Notes : Release 13, 25.3.97
 - Win95 Accelarator Pack 1.1 supports Multi-Link-Connection
   and Dial-Up-Server. This was not tested ( and not working)in
   previous Releases.
   With this Release it is possible to use Multi-Link and
   the Dial-Up-Server of Win95 ( OSR-2 with ISDN-Acc.Pack 1.1).

***************************************************************


S_Hinweise:
OS/2 Server International rel 4.5 -> rel 4.51

S_Intern:
OS/2 Server International rel 4.5 -> rel 4.51


S_Hinweise:
IIS 3.0 : NetShow On-Demand Server (German)


S_Hinweise:
Information about the Intel TokenExpress(tm) PRO DOS DLC Driver


The DLC drivers for DOS included are:

     TPROARB1.SYS  (v1.01 Interrupt arbitrator)
     TPRODLC2.SYS  (v1.08 DLC driver)


When using the TokenExpress card in an IBM environment these drivers
will need to be loaded. Insert the following lines in the CONFIG.SYS file:


                DEVICE=<path>\TPROARB1.SYS
                DEVICE=<path>\TPRODLC2.SYS
     (optional) DEVICE=<path>\DXMT0MOD.SYS


S_Hinweise:
tina+95
=======

Readme for CAPI subsystem driver (Acotec) with tina-dd
and tina-dvV8 under Windows 95.

Copyright Stollmann Entwicklungs- und Vertriebs-GmbH

History:
--------
13.05.96  created

There are three ways to connect a Windows 95 computer to ISDN:

- Integration via CAPI subsystem of Acotec (this floppy)
- Integration via NDIS-Miniport driver (a different product)
- Integration via serial modem driver and COM-Port (a different
  product)

This floppy contains the software necessary for the integration
via CAPI subsystem of Acotec. It supports one/two B-channel with up
to 64.000 bps. For support of more B-channels, Terminaladaptors
or X.25-PC cards call Stollmann E+V at ++49-40-890 88-0.

This floppy contains the following files:

- fw??1tr6.loc          Loadable Firmware with D-channel proto-
                        col 1TR6 for tina-??
- fw??dss1.loc          Loadable Firmware with D-channel
                        protocol DSS1 for tina-??
- oemsetnt.inf          Installation script for WIN 95
- readme.txt            This text
- timac.vxd             NDIS/TAPI Miniport driver


S_Bezeichnung:
Update Workstation Domestic v4.51 (OS/2) -US

S_Hinweise:
OS/2 Workstation Domestic rel 4.5 -> rel 4.51

S_Intern:
OS/2 Workstation Domestic rel 4.5 -> rel 4.51


S_Hinweise:
IIS 3.0 : FrontPage 97 Server Extensions (German)


S_Bezeichnung:
Update v4.51 Workstation Int. (OS/2) -US

S_Hinweise:
OS/2 Workstation International rel 4.5 -> rel 4.51

S_Intern:
OS/2 Workstation International rel 4.5 -> rel 4.51


S_Bezeichnung:
Drv. IBM Lan Server4.0 Client v1.10 - US

S_Hinweise:
TokenExpress(TM) PRO adapter and LAN Server 4.0 DOS\Windows configuration

     LAN Server 4.0 DOS\Windows Configuration

     This file contains instructions for installing the TokenExpress(TM) PRO
     adapter driver.  It contains information specific to the installation
     and operation of Intel's TokenExpress PRO adapters only.  Please refer
     to the appropriate Network Operation System documentation for any
     NOS-specific questions or other information.

     Installing and Configuring the Intel TokenExpress adapter for LAN 
     Server 4.0


S_Hinweise:
IIS 3.0 : FrontPage 97 Server Extensions (US English)


S_Hinweise:
Latest DOS Novell Netbios driver for use with Lotus Notes

S_Intern:
Latest DOS Novell Netbios driver for use with Lotus Notes


S_Bezeichnung:
Drv. PRO LAN NDIS Miniport v2.06 (NT x) - US

S_Hinweise:
INTEL TOKENEXPRESS PRO ISA LAN ADAPTER WINDOWS NT* 
 ==================================================

 This archive contains the TokenExpress PRO LAN Adapter Windows NT NDIS miniport 
 driver v2.06. This driver contains several performance enhancements and resolves 
 some ring insertion issues seen using the TokenExpress PRO LAN Adapter with 
 intelligent concentrators.

 For installation instructions view the following text files:

 NT4X.TXT  - Windows NT Workstation and Server 4.x
 NT35X.TXT - Windows NT Workstation and Server 3.50 or 3.51


S_Hinweise:
FaxPress Gateway
FaxPress GroupWise Gateway

S_Intern:
FaxPress Gateway
FaxPress GroupWise Gateway


S_Hinweise:
=======================================================================
                     NotesSQL 2.01 
                 ODBC Driver for Notes
=======================================================================

(c) 1996 Lotus Development Corporation.  All rights reserved.
This software is subject to the Lotus Notessql Software Development
Kit Agreement.  Restricted Rights for U.S. government users, and 
applicable export regulations.


November 1996

For up to date information, see http://www.lotus.com
For more information, see NotesSQL.NSF. 

To use NotesSQL, you'll need a Notes client for Windows 3.1 or 3.11 (16-bit).
To install, run Setup.exe.

S_Intern:
NotesSQL 2.01 - Windows 16-bit Lotus Notes ODBC Driver


S_Hinweise:
Internet Locator Server for Windows NT(Dec Alpha) - US English Version 
MCIS Internet Locator Server maintains a dynamic database of users who are currently online and their IP addresses. The Locator server database is constantly updated with transient information as users connect and disconnect from the site or service.


S_Bezeichnung:
Drv. PRO LAN NDIS Miniport v2.07 (WIN95) - US

S_Hinweise:
TokenExpress(TM) LAN adapters
This archive contains the TokenExpress(TM) PRO LAN Adapter Windows 95* NDIS miniport driver v2.07. This driver contains several
enhancements and resolves some ring insertion issues seen using the TokenExpress PRO LAN Adapter with intelligent concentrators.


S_Hinweise:
Installation Instructions and Release Notes


To install the new driver:

-- copy NOTESSQL.EXE to a temporary directory (e.g. \temp)
-- from DOS, run NOTESSQL to expand the files.
-- from Windows, File Run \temp\setup to install the driver
-- delete the files from the temporary directory


Release Notes for NotesSQL 1.2

Feature Changes since v1.1d


Peformance Improvement for connection

 NotesSQL v1.2 reduces connection time substantially by doing
 incremental system catalog construction as the driver needs
 information about forms and views. At connection, the driver
 only opens the database and reads the names of forms and views.


S_Hinweise:
Internet Locator Server for Windows NT(Intel) - US English Version 
MCIS Internet Locator Server maintains a dynamic database of users who are currently online and their IP addresses. The Locator server database is constantly updated with transient information as users connect and disconnect from the site or service.


S_Hinweise:
Lotus Notes Release 3.1 - Notes Server for NetWare

S_Intern:
Lotus Notes Release 3.1 - Notes Server for NetWare


S_Hinweise:
SMS Windows NT Inventory Collector. Systems Management Server 1.2 supports Inventory as a Service on Windows NT. However, if no-one logs onto a system, you cannot collect this inventory information.


S_Bezeichnung:
Registration Database for Lotus NotesNetw. -US

S_Hinweise:
LNN registration database - to sign up for LNN

S_Intern:
LNN registration database - to sign up for LNN


S_Hinweise:
TokenExpress(TM) LAN adapters
TokenExpress PRO LAN Adapter Microsoft Windows for Workgroups driver TPRO.386 v1.02. This new driver resolves some ring insertion
issues seen when using the TokenExpress PRO LAN Adapter with some intelligent concentrators.


S_Hinweise:
Index Server 1.1 deutsch
Erfordert Windows NT Server 4.0 und Internet Information Server 2.0.


S_Hinweise:
Index Server 1.1 english
Requiers Windows NT Server 4.0 and Internet Information Server 2.0.


S_Bezeichnung:
Connection Script through CompuServe to LNN -US

S_Hinweise:
Connection Script through CompuServe to LNN

S_Intern:
Connection Script through CompuServe to LNN


S_Hinweise:
EtherExpress(TM) LAN adapters
EtherExpress(TM) PRO/100B and PRO/10+ PCI Adapter 32bit ODI driver for Client 32 (E100B.LAN) v1.47. This is a 3.30 specification
LAN driver, and is certified for Client 32 operations in Windows 95* and DOS/Windows 3.1x. If using this on a NetWare* 3.12 or 4.10
server, the 3.30 specification NLMs from Novell are needed, along with the latest operating system patches. This archive has been updated to
include notes on resolving the issue when the ATI driver shows up automatically for the PRO/100B adapter.


S_Hinweise:
SMS Status MIF Generator. Create a Status MIF quickly and easily from the command line. 16bit version.


S_Hinweise:
VIM for cc:Mail for OS/2 - 32 bit Release 6.02
         ==============================================

(c) Copyright 1997 cc:Mail Inc., a wholly owned subsidiary of
Lotus Development Corporation. All rights reserved.

Lotus is a registered trademark of Lotus Development Corporation.
cc:Mail is a trademark of cc:Mail, Inc. Other products and company 
names mentioned herein may be the trademarks or registered 
trademarks of their respective owners.

This is the first release of dual-mode VIM. It supports 
Release 5x (DB6) and Release 6 and 8 (DB8) post offices.
 
Contents
========
Included Files
Support Services

Included Files
==============
This release includes the following files:

S_Intern:
Dual Mode 32-bit OS/2 VIM for Release 8 (DB6 and DB8)


S_Hinweise:
EtherExpress(TM) LAN adapters
v2.51 of the EtherExpress(TM) PRO/100B adapter drivers and configuration files. Includes drivers for Novell NetWare*, Microsoft Windows
NT* 3.51 & 4.0, Windows 95*, Windows for Workgroups, IBM Lan Server and Banyan Vines clients. The Novell NetWare DOS ODI and
Microsoft Windows NT drivers include Intel's new Adaptive Technology.


S_Hinweise:
VIM for cc:Mail for WINDOWS - 16 bit Release 6.02
        =================================================

(c) Copyright 1997 cc:Mail Inc., a wholly owned subsidiary of
Lotus Development Corporation. All rights reserved.

Lotus is a registered trademark of Lotus Development Corporation.
cc:Mail is a trademark of cc:Mail, Inc. Other products and company 
names mentioned herein may be the trademarks or registered 
trademarks of their respective owners.

This is the first release of dual-mode VIM. It supports 
Release 5x (DB6) and Release 6 and 8 (DB8) post offices.

This release of VIM supports the latest release and all 
earlier versions of cc:Mail. The names of a few supporting 
DLL files have been changed.

Contents
========
Fixed Problems
Included Files
Support Services

S_Intern:
Dual Mode 16-bit VIM for Release 8 (DB6 and DB8)


S_Hinweise:
SMS Status MIF Generator. Create a Status MIF quickly and easily from the command line. 32bit version


S_Hinweise:
VIM for cc:Mail for WINDOWS - 32 bit Release 6.02
        =================================================

(c) Copyright 1997 cc:Mail Inc., a wholly owned subsidiary of
Lotus Development Corporation. All rights reserved.

Lotus is a registered trademark of Lotus Development Corporation.
cc:Mail is a trademark of cc:Mail, Inc. Other products and company 
names mentioned herein may be the trademarks or registered 
trademarks of their respective owners.

This is the first release of dual-mode VIM. It supports 
Release 5x (DB6) and Release 6 and 8 (DB8) post offices.
This release supports the latest release and all earlier
releases of cc:Mail. The names of some of the supporting DLL files 
have been changed.

Contents
========
Fixed Problems
Included Files
Support Services

S_Intern:
Dual Mode 32-bit VIM for Release 8 (DB6 and DB8)


S_Bezeichnung:
Drv. PRO100B/10+ 16-Bit Client v2.31 - US

S_Hinweise:
Intel EtherExpress(TM) PRO/100B and PRO/10+ PCI LAN Adapters
16-bit DOS ODI Client driver
E100BODI.COM version 2.31


S_Hinweise:
EtherExpress(TM) PRO/100 (ISA) LAN Adapter Driver Disk 
Software Release v2.0


S_Hinweise:
Lotus cc:Mail Win32 Applications Update
                =======================================

(c) Copyright 1997  cc:Mail Inc., a wholly owned subsidiary of Lotus
Development Corporation. All rights reserved.

This file contains updated files for Lotus cc:Mail products 
written for the Microsoft Windows 32-bit enviornment.
Customers of these products should read the contents of this 
document to insure the proper use of the included update.

NOTE:     None of the issues listed in this document affect the
released version of Lotus cc:Mail Release 8. This includes all
the Win32 applications contained in the Lotus cc:Mail Advanced
Messaging Server on the Release 8 CD as well as the Lotus cc:Mail
Release 8 for Windows client for 32-bit Windows.

Table of Contents
=================
Issues Resolved in this Update
Products Affected by this Update
Installing this Update 
cc:Mail Support Services for Administrators

S_Intern:
Update for Lotus cc:Mail Win32 Applications


S_Hinweise:
SMS MIF Renaming Tool. The improved dataloader in SMS 1.2 relies on different types of MIFs having different file extensions. However, if your MIFs are generated in SMS 1.0 or 1.1 sites this will not be the case.


S_Bezeichnung:
Drv. PRO/100 ISA Netware Server (Nov. x) v2.0 - US

S_Hinweise:
EtherExpress(TM) LAN adapters
Software release v2.0 of the Intel EtherExpress(TM) PRO/100 ISA LAN adapter Novell NetWare* server driver (E100ISA.LAN). Meets
Novell 3.3 server specification. This driver can be used with Novell NetWare 4.1x and the necessary Novell support NLMs are included.

This archive also contains E100ISA.LAN v1.03 which meets the Novell 3.2 specification for use in Novell NetWare 3.1x file servers. The
necessary Novell support NLMs are included.


S_Hinweise:
Lotus cc:Mail Release 6.02 Router
     =================================
(c) Copyright 1997 cc:Mail Inc., a wholly owned subsidiary of
Lotus Development Corporation.

This README contains information about the files included in 
RTR60201.EXE and how to install them.

.  RTR60201.EXE contains the following files:

    .  The Release 6.02 Router files from the Release 8 CD-ROM
 
    .  READMER.TXT, which contains late-breaking information about
       Release 6.02 Router

. To install the RTR60201 patch, follow this procedure:

---------------------------------------------------------------------
NOTE: Follow these instructions exactly as specified here.
      If you don't, you cannot install and use Router 6.02.01 patch 
      release. If you encounter problems while installing this patch, 
      verify that you followed the procedure exactly before calling 
      cc:Mail Support Services.
---------------------------------------------------------------------
Installing Router 6.02.01 Patch
-------------------------------

S_Intern:
cc:Mail Router Release 6.02.01 Patch.  See README.TXT for details.


S_Bezeichnung:
Mobile Vendor Hardware Certification -US

S_Hinweise:
Mobile Vendor Hardware Certification program

S_Intern:
Mobile Vendor Hardware Certification program


S_Bezeichnung:
Drv. PRO/100 ISA v1.21 (LAN Manager) - US

S_Hinweise:
EtherExpress(TM) LAN adapters
Microsoft LAN Manager directory structure and NDIS DOS and OS/2 drivers for the Intel EtherExpress PRO/100 ISA LAN adapter. When
extracted to a floppy, this archive will create the necessary directory structure and drivers to add the EtherExpress PRO/100 ISA adapter to a
Microsoft LAN Manager server. This Archive contains E100ISA.DOS v1.21 and E100ISA.OS2 v1.21.


S_Hinweise:
OS/2 Pause program (to clear memory of last Notes process)

S_Intern:
OS/2 Pause program (to clear memory of last Notes process)


S_Bezeichnung:
Drv. PRO/100 ISA ODI Netware Request.(OS/2) - US

S_Hinweise:
EtherExpress PRO/100 ISA LAN adapter ODI Driver 
                      for the Novell NetWare* Requester for IBM* OS/2


S_Hinweise:
EtherExpress(TM) LAN adapters
Software release v2.0 of the Intel EtherExpress PRO/100 ISA LAN Packet Driver (E100ISA.EXE).


S_Hinweise:
REQUIREMENTS
============

To run this version of the Lotus Notes Connect for SNA driver, 
you need the following revisions of software:

* Lotus Notes Release 4.1

* IBM OS/2 version 2.11or OS/2 Warp Version 3  and Communications 
  Manager/2 version 1.11 with CM/2 maintenance bundle CM2AP111 or later
		or 
  Microsoft Windows NT Version 3.51or later and Microsoft SNA Server 
  version 2.11 

The distribution disk contains the following files for 
Lotus Notes Connect for SNA on OS/2:

iappc.dll
idappc.dll
readme.1st
snadoc.nsf
$APPC.DLL


The distribution disk contains the following files for 
Lotus Notes Connect for SNA on Windows NT:


S_Bezeichnung:
Drv. PRO100 SmartAdapter v2.93 (Nov 4.11) - US

S_Hinweise:
EtherExpress(TM) LAN adapters
This archive contains the v3.30 ODI Assembly Specification driver for the EtherExpress(TM) PRO/100 Smart adapter. The driver is also
included in the Novell NetWare* 4.11 release. In addition, the archive contains installation instructions for both NetWare 4.11 and NetWare
4.10. 

 E100S.LAN       3.3 Spec Server Driver          ver 2.93    04-11-96


S_Bezeichnung:
Drv.Set PRO/100 Server Adapt. Config v1.0 - US

S_Hinweise:
EtherExpress(TM) LAN adapters
Software v1.0 of the EtherExpress(TM) PRO/100 Server Adapter drivers and configuration files. Includes drivers for Novell NetWare*,
Microsoft Windows NT* 3.51 & 4.0, VLAN and AFT for Novell Netware, AFT for Microsoft NT 4.0.


S_Hinweise:
LotusScript Data Object 4.11 Update
RELEASE NOTES
===================================

These notes apply to the LS:DO 4.11 Update and supercede the Release Notes
for 4.0. The 4.11 Update should work with Lotus Notes versions from 4.0 to
4.11.


General
=======
*	To use LS:DO, you must have a UseLSX statement in your script.
	This currently only works on a client system that has Lotus Notes.

*	Here is an overview of table creation via LS:DO:
	1. Construct a CREATE TABLE statement that specifies the types
	   and sizes of the fields using the specific syntax required by
	   the data source. Execute this query and Close the result set.
	2. Execute a SELECT * FROM [tablename] statement to set the field
	   properties in the ODBCResultSet object.
	3. For each row, invoke AddRow, set values of fields using
	   SetValue, and insert the data via UpdateRow.
	4. Invoke Close on the ODBCResultSet object to clean up.
	5. If you wish to use this table later in the script, set a new
	   SELECT statement and use Execute to re-initialize the result
	   set properties.
	All the above can be performed using one ODBCQuery object and one
	ODBCResultSet object, as long as the indicated cleanups are done.


S_Hinweise:
IIS 3.0 : NetShow On-Demand Player (US English)


S_Bezeichnung:
Software Release f. PRO/10+ PCI v2.51 - US

S_Hinweise:
10PPDISK.TXT
05/07/97
Software Release 2.51 for the Intel EtherExpress(TM) PRO/10+ PCI LAN adapter.

This archive contains the software drivers and configuration files that are
shipping on the latest released diskette.  Specific driver updates may be 
posted separately. 
EtherExpress(TM) LAN adapters
Software Release 2.51 of the Intel EtherExpress(TM) PRO/10+ PCI adapter drivers and configuration files. This software release is currently
shipping with the PILA8500 and PILA8520 products. These drivers are NOT for use with the PRO/10 PCI adapter (PILA84x0).


S_Hinweise:
IIS 3.0 : NetShow On-Demand Server (US English)


S_Bezeichnung:
Update f. CL6729 or 6730 PCMCI Chips - us

S_Hinweise:
EtherExpress(TM) LAN adapters
Update for computers that use the Cirrus Logic 6729 or 6730 PCMCIA controller chipset. This update allows the Mobile adapter PC Card's
real mode drivers to load without using Card and Socket Services.


S_Hinweise:
LotusScript Data Object 4.11 Update
RELEASE NOTES
===================================

These notes apply to the LS:DO 4.11 Update and supercede the Release Notes
for 4.0. The 4.11 Update should work with Lotus Notes versions from 4.0 to
4.11.


General
=======
*	To use LS:DO, you must have a UseLSX statement in your script.
	This currently only works on a client system that has Lotus Notes.

*	Here is an overview of table creation via LS:DO:
	1. Construct a CREATE TABLE statement that specifies the types
	   and sizes of the fields using the specific syntax required by
	   the data source. Execute this query and Close the result set.
	2. Execute a SELECT * FROM [tablename] statement to set the field
	   properties in the ODBCResultSet object.
	3. For each row, invoke AddRow, set values of fields using
	   SetValue, and insert the data via UpdateRow.
	4. Invoke Close on the ODBCResultSet object to clean up.
	5. If you wish to use this table later in the script, set a new
	   SELECT statement and use Execute to re-initialize the result
	   set properties.
	All the above can be performed using one ODBCQuery object and one
	ODBCResultSet object, as long as the indicated cleanups are done


S_Hinweise:
File Resource

SPX Connection Tester for SAP broadcasts

Overview of Resource:

This utility simulates a Notes R3 Client with an SPX Port configured. 
It sends out the NetWare SAP Broadcast "Get Nearest Server Query" to 
check if the SAP-Broadcast reaches a FileServer.

It is useful for checking if a Novell-Router / Bridge problem exists or 
if the NetWare SPX-Client Windows software is installed correctly.


© 1994 Lotus Development Corporation, an IBM subsidiary. All rights 
reserved. 
Material may not be reproduced or distributed in any form without 
permission.

S_Intern:
SPX Connection Tester for SAP broadcasts


S_Hinweise:
EtherExpress(TM) LAN adapters
EtherExpress(TM) PRO/10+ ISA adapter driver v3.65 (EPRO10.SYS) for Microsoft Windows NT*. This is the first release of a NDIS 3
Miniport driver. It will replace EPRONT.SYS and this driver supports all PRO/10 ISA adapters (product codes PCLA82xx, PCLA82xxA and
PCLA82xxB). This new EPRO10.SYS driver resolves a problem with the NetworkAddress keyword function under NT. Also included is an
updated version of the PROSet utility.


S_Hinweise:
EtherExpress(TM) LAN adapters
EtherExpress PRO/10 PCI Adapter 32bit ODI Driver for Client 32 (E10P.LAN) v2.03. This is a 3.30 specification LAN driver. This driver is
for use with Novell's Client 32 in Windows 95 and DOS/Windows 3.1x. For NetWare servers, you will need the 3.30 specification NLMs. This
version addresses a problem where a user could experience data corruption running under Client 32.


S_Hinweise:
HP JETADMIN FOR WINDOWS 3.X (with NetWare) (VERSION 2.40)
                         02/03/97
     
**************************************************************

 HP JETADMIN FOR WINDOWS 3.X (with NetWare) contains support for 
 the latest printers and plotters from HP (LaserJet 5SiMX/Mopier, 
 LaserJet 5/5M/5N, Color LaserJet 5/5M, and LaserJet 6P).


S_Hinweise:
REQUIREMENTS
============

To run this version of the Lotus Notes Connect for SNA driver, 
you need the following revisions of software:

* Lotus Notes Release 4.1

* IBM OS/2 version 2.11or OS/2 Warp Version 3  and Communications 
  Manager/2 version 1.11 with CM/2 maintenance bundle CM2AP111 or later
		or 
  Microsoft Windows NT Version 3.51or later and Microsoft SNA Server 
  version 2.11 

The distribution disk contains the following files for 
Lotus Notes Connect for SNA on OS/2:

iappc.dll
idappc.dll
readme.1st
snadoc.nsf
$APPC.DLL


The distribution disk contains the following files for 
Lotus Notes Connect for SNA on Windows NT:

nappc.dll
ndappc.dll
snadoc.nsf
readme.1st
NAPPC.DLL


S_Bezeichnung:
Software Release f. PRO/10+ PCI v1.4 - US

S_Hinweise:
EtherExpress(TM) LAN adapters
Software Release v1.4 of the PRO/10 PCI adapter (PILA8400 and PILA8420). This archive is NOT for use with the PRO/10+ PCI adapter
(PILA8500 or PILA8520). Updates to the drivers disk include newer DOS ODI, NetWare server (3.2 specification; not for use with Client 32),
Windows NT/Windows 95 NDIS 3, and Windows for Workgroups drivers.


S_Hinweise:
Windows 95 Update to Enhance Password Security.
Update for MSNDS Services for NetWare.


S_Hinweise:
Windows 95 Update to Enhance Password Security.
Updates Network Components


S_Hinweise:
Die I-Net Web JetAdmin Software ermöglicht Ihnen, mit HP JetDirect verbundene Drucker,
Scanner und Plotter mit einem Web Browser anzuzeigen und zu verwalten.

Nur unter WIN NT 3.51 und höher installierbar !


S_Hinweise:
Overview of Resource:

Here is a diagnostic program which uses DOS IPX to listen for Service 
Advertising Packets (SAP) and displays servers which match a specified server 
type.

SAPCAP [type] [>logfile]	-- captures SAPs of "type" (to "logfile")

NBSCN listens for SAP packets (which are broadcast on socket 452h) and displays
the servers which match a specified server type (in hex).  If the output is 
redirected to a file, it also be sent to the standard error for display.  
If no server type is specified, all server types are displayed.

Some common SAP server types are:
  3h    Print Queue                      9Ah    Named Pipes Server
  4h    File Server                     26Bh    Directory Services Server
  7h    Print Server                    278h    Directory Services Domain
 47h    Advertising Print Server        30Ch    Remote Printer
 98h    Novell Access Server

S_Intern:
Information concerning the SPX SAP utility


S_Hinweise:
SMS Add-ins. This tool allows you to add new items to menus in the Administrator User Interface, ideal for providing a customized UI.


S_Hinweise:
EtherExpress(TM) LAN adapters
EtherExpress(TM) PRO/10 PCI driver v1.15 (E10P.SYS) for Microsoft Windows NT* 3.51 and 4.0. This will load under check build of NT
4.0. The updated OEMSETUP.INF fixes installations under NT 4.0; it also removes need to have tag file reference (E10P.DSK).


S_Hinweise:
LMS-COMPONENT, EXTENDED-MADMAN, and LMS-TRAP-FORWARDING MIBs Defined

S_Intern:
LMS-COMPONENT, EXTENDED-MADMAN, and LMS-TRAP-FORWARDING MIBs Defined


S_Hinweise:
EtherExpress(TM) LAN adapters
EtherExpress(TM) PRO/10 PCI driver v1.15 (E10P.SYS) for Microsoft Windows 95*. Update NETE10P.INF so that real mode drivers can
be copied from same subdirectory. Driver changes affected NT environment.


S_Hinweise:
DESCRIPTION OF PROBLEM FIXED:
-----------------------------
    cc:Mail for the Internet Release 1.0 users that are connected to
    an AS/400 system in an 'SNA-only environment' MUST apply this
    fix to correct problems with the 'send' and 'reply-to' mail
    functions. An 'SNA-only environment' is an AS/400 that does not
    have TCP/IP configured or SMTP active.
 
    These cc:Mail for the Internet users would have the following
    configuration defined in their System Distribution Directory
    entry:
 
       Message Service Level      2=System message store
       Preferred Address          1=User ID/Address
 
    In addition, these users would NOT have a name defined in the SMTP
    system alias table. To view the SMTP alias table enter 'WRKNAMSMTP'
    and select an alias table type of '1=System'.

    This problem may also be present in SMTP environments where SMTP
    names are not configured or are configured incorrectly.

S_Intern:
Fixes Send and Reply-to for AS400 POP3 Client


S_Hinweise:
EtherExpress(TM) LAN adapters
EtherExpress(TM) PRO/10 PCI driver v1.14 (E10P.386) for Microsoft Windows for Workgroups. This version fixes a problem with the
NetBEUI protocol multicast capability. Previous versions had problems connecting to Windows NT* servers via NetBEUI protocol.


S_Hinweise:
EtherExpress(TM) LAN adapters
EtherExpress(TM) PRO/10+ ISA adapter driver v3.65 (EPRO10.SYS) for Microsoft Windows 95*. This is the first release of a NDIS 3
Miniport driver. It will replace EPRO.VXD and this driver supports all PRO/10 ISA adapters (product codes PCLA82xx, PCLA82xxA and
PCLA82xxB). The new EPRO10.SYS driver resolves a problem seen with the .VXD driver where on high speed machines it would
occasionally blue screen. Also included is an updated version of the PROSet utility.


S_Hinweise:
In order to run your CMC application on cc:Mail or Lotus Notes Release 3.2 (or later),  you must install the Lotus CMC implementation.  The Lotus CMC implementation is only available for Windows 3.1.

To install the Lotus CMC implementation, download or detach the install.exe file and the cmc.dll file onto the root directory of a floppy disk.  Then, under Microsoft Windows, from the File menu of the Program Manager or File Manager, choose Run.  Type a:\install, where 'a' represents the floppy disk drive.

The install program will prompt you for the directory where to install the Lotus cmc.dll.  Usually this is your Lotus Notes or cc:Mail program directory.  When possible, the install program will display a default directory.  Choose OK to accept the default directory, or specify the directory where the cmc.dll will be copied to.  The install program will copy the cmc.dll into the specified directory.  It will also create or update the CMCDLLNAME entry in the win.ini file to indicate the full path and file name specification of the CMC implementation.


S_Hinweise:
Microsoft Windows NT 3.51 Workstation und Server Service Pack 5 deutsch


S_Hinweise:
Readme file for AppleTalk for OS/2 taken from the Lotus Notes Release 3.0B
Release Notes.
 
This README describe the Notes AppleTalk files for OS/2 (v1.1b)

AppleTalk for OS/2 Servers

The disk "AppleTalk Files for OS/2" (v1.1b) that comes with Release 3.0B and
included here now let you use the AppleTalk protocol on Notes servers running 
OS/2 2.1 or 1.3.  

The AppleTalk files provided with Notes Release 3.0 supported Notes servers 
running OS/2 1.3 only.  

Note:   No version of the AppleTalk protocol driver supports Notes 
servers that run OS/2 2.0 or any version of OS/2 that is lower than OS/2 1.3.  

V1.1b of the Notes AppleTalk files also corrects the following problem that 
occurred in the Release 3.0 version of these files:   a Macintosh workstation 
connected to a Notes server by way of a Token Ring source routing bridge or a 
router that does source routing, received intermittent "server not responding" 
error messages.   The new AppleTalk files eliminate this problem.


S_Hinweise:
Intel EtherExpress PRO/10+ ISA LAN Adapter
Windows for Workgroups NDIS 3.0 driver
EPRO.386 v3.01

Contained in this archive

OEMSETUP.INF    10/25/96    1,234 
EPRO.386        10/22/96   30,769 

This driver has been updated to include keywords to enable and adjust 
for collision reduction.


S_Bezeichnung:
Drv. EE16Lan Adapter 32-Bit Client v3.07

S_Hinweise:
EtherExpress(TM) 16 Adapter 32-bit ODI Novell NetWare* 3.3 Driver
  EXP16.LAN v3.07

  

*******************************************************************
************** Novell NetWare Client 32 for Windows 95 ************
*******************************************************************

   Novell NetWare* Client 32 Windows 95 Installation Notes 
   for Intel's EtherExpress 16 LAN Adapter
   ================================================================
  EtherExpress(TM) 16 and MCA Adapter Novell NetWare* 32-bit ODI Driver for Novell NetWare Client 32
[E16CL32.EXE]

EtherExpress(TM) LAN adapters
This EtherExpress(TM) 16 adapter driver EXP16.LAN v3.09 complies to Novell 3.3 specification. This driver can be used for 32-bit ODI
driver support for Novell's Client 32 for DOS/Windows 3.1 and Novell's Client 32 for Windows 95*.


S_Bezeichnung:
Drv. EE16 Adapter 32-Bit ODI (Nov x) - US

S_Hinweise:
EtherExpress(TM) 16 Adapter and MCA Novell NetWare* 32-bit ODI Driver and EXP16.LAN for NetWare 4.1x
File Servers [E16LAN.EXE]

EtherExpress(TM) LAN adapters
Intel EtherExpress(TM) 16 and MCA adapter Novell NetWare* server driver EXP16.LAN v3.09. It meets Novell 3.3 server specification and
this driver can be used with Novell NetWare 4.1x file servers. The necessary Novell support NLMs are included. 

This archive also contains EXP16.LAN v2.43 which meets the Novell 3.2 specification for use in Novell NetWare 3.1x file servers. The
necessary Novell support NLMs are included.


S_Hinweise:
EtherExpress(TM) 16 LAN Adapter Windows 95* Driver [E16WIN95.EXE]

EtherExpress(TM) LAN adapters
EtherExpress 16 LAN adapter ISA and MCA NDIS 3.1 Miniport driver for Windows 95.


S_Hinweise:
FILE FOR 
                HP J2573A 10/100VG SELECTABLE ISA LAN ADAPTER
                                 A.05.00
 This disk contains the configurator and drivers for the Hewlett-Packard
 J2573A ISA 10/100VG LAN Adapter.  The HP J2573A ISA LAN adapter   supports connections to 802.3 10Base-T or 100VG Local Area Networks.


S_Hinweise:
Intel EtherExpress(TM) 10 ISA LAN Adapter Driver Disk SW Release 1.1 [EX10DISK.EXE]

EtherExpress(TM) LAN adapters
EtherExpress(TM) 10 ISA driver diskette, software release 1.1. This includes a EX10SET.EXE diagnostic and configuration utility, along with
Microsoft and Novell software drivers. 

These drivers are ONLY for the 10 ISA adapter, (PCLA8230PAK20 and PCLA8240PAK20) and they will NOT work on the PRO/10 ISA
series of adapters (PCLA820x, PCLA821x or PCLA822x).


S_Hinweise:
Intel EtherExpress(TM) 10 ISA LAN Adapter Windows NT* Driver [EX10NT.EXE]

EtherExpress(TM) LAN adapters
EtherExpress(TM) 10 ISA adapter driver v1.50 (EX10.SYS) for Microsoft Windows NT*. This is the first release of a NDIS 3 Miniport driver.
It will replace EX10NT.SYS and this driver supports only the 10 ISA adapter (PCLA8230 and PCLA8240) This driver will not work on Intel's
PRO/10+ ISA adapter. This new EX10.SYS driver resolves a problem seen with the network address keyword feature under NT.


S_Hinweise:
MSS 2.5: Diagnostic Program for Image Issues for 2.0 Upgraders

S_Intern:
MSS 2.5: Diagnostic Program for Image Issues for 2.0 Upgraders


S_Hinweise:
SUPPORT DISK FOR 
       HP J2577A 10/100VG SELECTABLE EISA LAN ADAPTER
             A.06.00
 
 
 This disk contains the configurator and drivers for the Hewlett-Packard
 10/100VG EISA LAN Adapter.  The J2577A EISA adapter supports  connections to 802.3 10Base-T or 100VG Local Area Networks.


S_Hinweise:
Intel EtherExpress(TM) 10 ISA LAN Adapter Windows 95* Driver [EX10W95.EXE]

EtherExpress(TM) LAN adapters
EtherExpress(TM) 10 ISA adapter driver v1.50 (EX10.SYS) for Microsoft Windows 95*. This is the first release of a NDIS 3 Miniport driver.
It will replace EX10.VXD and this driver supports only the 10 ISA adapter (PCLA8230 and PCLA8240) This driver will not work on Intel's
PRO/10+ ISA adapter. This new EX10.SYS driver resolves a problem seen with the .VXD driver where on high speed machines it would
occasionally blue screen.


S_Bezeichnung:
Complete list of all certified modem strings -US

S_Hinweise:
Complete list of all certified modem strings

S_Intern:
Complete list of all certified modem strings


S_Bezeichnung:
Macro: Updating All Inherited Fields -US

S_Hinweise:
Macro: Updating All Inherited Fields When Multiple Main Docs Change

S_Intern:
Macro: Updating All Inherited Fields When Multiple Main Docs Change


S_Hinweise:
SUPPORT DISK FOR 
                HP J2585A 10/100VG SELECTABLE PCI LAN ADAPTER
                                 A.01.00
 
 This disk contains the configurator and drivers for the Hewlett-Packard
 J2585A 10/100VG PCI LAN Adapter.  The HP J2585A PCI LAN adapter   supports connections to 802.3 and 802.12.


S_Hinweise:
SUPPORT DISK FOR 
                   HP J2585B 10/100VG PCI LAN ADAPTER
                                 B.05.02
 
 This disk contains the configurator and drivers for the Hewlett-Packard
 J2585B 10/100VG PCI LAN Adapter.  The HP J2585B PCI LAN adapter  supports  connections to 802.3 and 802.12.


S_Hinweise:
SUPPORT DISK FOR 
                    HP J2970A DESKDIRECT PCI LAN ADAPTER
                                 A.04.00
 
 This disk contains the configurator and drivers for the Hewlett-Packard
 DeskDirect PCI LAN Adapter.  The HP DeskDirect PCI LAN adapter supports 
 connections to 802.3 and 802.12.


S_Hinweise:
SUPPORT DISK FOR 
                   HP J2973A 10Base-T PCI LAN ADAPTER
                                 A.04.00
 
 This disk contains the configurator and drivers for the Hewlett-Packard
 J2973A 10Base-T PCI LAN Adapter.  The HP J2973A PCI LAN adapter  supports  connections to 802.3.


S_Hinweise:
SUPPORT DISK FOR 
                   HP DeskDirect LAN ADAPTER (J2973A)
                                 A.01.00
 
 This disk contains the configuration utility and drivers for the
 Hewlett-Packard DeskDirect LAN Adapter (J2973A), which supports
 connections to IEEE 802.3 networks.


S_Hinweise:
LFS10.zip - This file contains the updated files for LFS 1.0. 
Once these files have been installed and the instructions below
have been followed, the LFS will now be LFS 1.1


Steps to update from LFS 1.0 to LFS 1.1:

1.  Unzip the files into a temporary directory 

2.  Copy all of the EXE files to the directory C:\LFS.

3.  Copy the NTF files to the directory C:\Notes\Data.

4.  Open Notes.

5.  Replace the design of the LFS Mail file using the new LFS
    Mail template.

6.  Open the LFS Administration database

7.  Print the Fax Device Profile(s), Fax Server Profile, 
    DefaultUserProfile, and User Profile(s).

8.  Once done, check File - Database - Information.  Make note
    of the server and/or file name.

9.  Exit out of the dialogue box and database.

S_Intern:
Upgrade to LFS 1.1 for Windows 3.1 (2/25/97)


S_Hinweise:
Lotus Mail Exchange Facility 3.1 upgrade

S_Intern:
Lotus Mail Exchange Facility 3.1 upgrade


S_Hinweise:
LNDIFAX without MSS Installation Disks
Note: You must have the Inbound Fax Gateway already installed prior to installing LNDIFAX on the Notes Server.

* Copy all files from a:\notes to your Notes Program directory.
  
* Copy all files from a:\notes\data to your Notes Data Directory.

Edit the NOTES.INI file:

Add the following parameters:
	LNDIFAX_NSF=lndifax.nsf
	LNDIFAX_PATH=C:\LNDI\LNDIFAX
	UseMSS=0
	UseDDE=0


If you are using an MSS, change the following variable to:
	UseMSS=1

If you want to use DDE instead of OLE, change the following variable to:
	UseDDE=1


Add lndifax to the end of the ServerTasks statement in the NOTES.INI file.  For example:

 ServerTasks=Replica,Router,Update,Login,Stats,Fax,Accept,Route,lndifax


S_Hinweise:
SOFTWARE INSTALLATION INSTRUCTIONS
                   FOR NOVELL ODI DOS CLIENT DRIVER
             HP J3239A DeskDirect EL-10 ISA Combo Adapter
 
 
 For NDIS-2 drivers for DOS clients, see the NDIS-2 instructions   instead, or instructions for Microsoft LAN Manager or IBM LAN Server   for those specific NOSs.


S_Hinweise:
für Faxempfang-Probleme nach der Installation des Internet Explorers 3.0 und Office 97 (106.411 Bytes).

S_Intern:
für Faxempfang-Probleme nach der Installation des Internet Explorers 3.0 und Office 97 (106.411 Bytes).


S_Hinweise:
Lotus cc:Mail Release 6.00.02 Link to SMTP
     ====================================================
(c) Copyright 1997 cc:Mail Inc., a wholly owned subsidiary of
Lotus Development Corporation.

This README contains information about the files included in 
LNK60002.EXE and how to install them.

.  LNK60002.EXE contains the following files:

    .  Release 6.00.02 Link to SMTP files
 
    .  README01.TXT, which contains late-breaking information about
       Release 6.00.01 Link to SMTP and includes a URL for future
       product updates

    .  README02.TXT, which contains late-breaking information about
       Release 6.00.02 Link to SMTP

. To install the LNK60002, follow this procedure:

---------------------------------------------------------------------
NOTE: Follow these instructions exactly as specified here. If you
      don't, you cannot install and use the Link to SMTP 6.00.02
      patch release. If you encounter problems while installing this
      patch, verify that you followed the procedure exactly before
      calling cc:Mail Support Services.
---------------------------------------------------------------------
Installing Link to SMTP 6.00.02 Patch
-------------------------------------

S_Intern:
Patch to upgrade Link to SMTP for Windows NT/95 Release 6


S_Hinweise:
; NETJ3171.INF   Version 1.43
;
; HP 10/100TX PCI LAN Adapter Install Script for Windows 95
;
; Copyright 1995,1996 by Hewlett-Packard Company


S_Hinweise:
T-Online-Decoder von Microsoft Money 95 Version 4.0 (531.493 Bytes)für den T-Online-Decoder von Microsoft Money 95 Version 4.0 (531.493 Bytes)

Der in MS Money für Windows 95 enthaltene T-Online-Decoder ermöglicht Ihnen den Zugang zum T-Online mit einem analogen Modem. Mit dem MS-Money-ISDN-Modem wird der Zugang auch über ISDN möglich.

S_Intern:
ür den T-Online-Decoder von Microsoft Money 95 Version 4.0 (531.493 Bytes)


S_Hinweise:
für den T-Online-Decoder von Microsoft Money 97 Version 5.0 (56.921 Bytes)

Weitere Informationen über MS Money finden Sie auch auf den Webseiten von Microsoft.

S_Intern:
für den T-Online-Decoder von Microsoft Money 97 Version 5.0 (56.921 Bytes)


S_Hinweise:
Upgrade from JetAdmin 2.37 to 2.4.  New HPSCANUI.HPA applet required.


S_Bezeichnung:
Update Maintenance Tools v5.12 (OS/2) -US

S_Intern:
Updated Maintenance Tools for OS/2 Version 5.12


S_Intern:
Updated Maintenance Tools for DOS Version 5.12


S_Hinweise:
NOTE: Please follow these instructions exactly as specified here.
      Failure to do so may result in the patch not being applied.
      If you experience any errors applying this patch, please
      re-check your procedure to ensure that it matches the following
      instructions before requesting technical support.

Instructions for applying cc:Mail Mobile v2.22.01 Update
--------------------------------------------------------

   1) Insert patch diskette in floppy drive or copy Executable to a
      temporary directory on your hard disk.

   2) Ensure that you have exited cc:Mail Mobile and cc:Mail   
      Background for Windows before continuing.

   3) Run the Updater [WM222_01.EXE] from Windows or Windows '95.

   4) The Updater will prompt for the location of your cc:Mail
      Mobile files. Find the directory where these files are
      installed and click OK.

   5) The Updater will ask you to confirm updating the files in
       the directory you selected. Click "OK".

   6) The Updater will verify that the files in the selected
      directory are cc:Mail Mobile v2.22 and ask again for
      confirmation. If it finds a different version, or asks
      to update files that are not in the directory or drive 
      you selected in step 4, you may use the "Change Options"
      feature presented in step 5 to specify the exact drive
      to limit the Updater engine from checking other drives.


S_Hinweise:
ServicePack1 für den ISDN MultiProtocolRouter for Windows NT Version 2.1 (1.975.831 Bytes)

S_Intern:
ServicePack1 für den ISDN MultiProtocolRouter for Windows NT Version 2.1 (1.975.831 Bytes)


S_Hinweise:
Overview of Resource:

Lotus Image Viewer 1.0 (LIV) and LN:DI Professional Edition 2.6 or 2.61
(LN:DI Pro) were designed to be compatible with MSS 2.6.  LIV and LN:DI Pro
are not compatible with MSS 2.5 or MSS 2.0 by default.  You must install the
updated program file attached below in order to use LIV or LN:DI Pro with
MSS 2.5.

Refer to the document titled "MSS 2.5: Invalid Document Format Error with
LIV or LN:DI Pro"#137924 )  for a detailed explanation of this issue and the
errors that occur.

Instruction on How to Use:

A.  Install the Lotus Image Viewer (LIV) or LN:DI Professional Edition (LN:DI
Pro) onto the workstation.

B.  Install the MSS 2.5 Client Update disk over the LIV or LN:DI Pro program
directory.

   Note:  The MSS 2.5 Client Update disk comes with MSS 2.5.

C.  Install the MSSAPI_W.DLL file into the LIV or LN:DI Pro program directory
by doing the following:

S_Intern:
Updated File to Use LN:DI Pro 2.6 and LIV with MSS 2.5 (MSSAPI_W.DLL)


S_Bezeichnung:
Fix for 3.34 Intl. CD Regarding Data Disk 5 error

S_Hinweise:
Fix for 3.34 Intl. CD Regarding Data Disk 5 error

S_Intern:
Fix for 3.34 Intl. CD Regarding Data Disk 5 error


S_Hinweise:
Customers using MSS 2.6 may notice difficulty mounting the higher density 
optical volumes. ( 2.6 Gig platters )  In order for these larger volumes
to be recognized, customers must obtain the latest drivers from Pegasus.

These patches have been tested with Pegasus OFS 2.5.1 & 2.5.2.  They may
work with later versions of the Pegasus OFS, but this is untested.

Steps to install the patch:

1. Shutdown the MSS.

2. Change directory to the MSS directory.  ( ex C:\MSS )

3. Rename the Peg_DM.dll, PHD_DM.dll and the VimThunk.dll in the MSS 
   installed directory.  

4. Copy the new files into the MSS directory.  

5. Restart the MSS.

6. Mount the Optical Volumes in the MSS software.

Call Notes Technical support if you have further problems.

S_Intern:
Updated MSS files for the Pegasus 2.5.1 & 2.5.2 OFS


S_Hinweise:
zeitversetztes Senden •ISDN Sendeoptionen •Update Locations •Benutzermanagement •Verteiler im Adressbuch •Relogin Mapitransportprovider Die Patches für ISDN for Windows Professional bauen aufeinander auf. Bitte installieren Sie sie in der angegebenen Reihenfolge


S_Hinweise:
Quincy Debugger (QNC.EXE) for Windows NT

S_Intern:
Quincy Debugger (QNC.EXE) for Windows NT


S_Hinweise:
File: EMPCI.EXE 
Date: 12/02/96 
Size: 623,458 
Description: Performance release update of Windows NT and Netware drivers. New Diagnostics. Complete Universal Driver Set

Adaptec PCI Ethernet and Fast Ethernet Adapters including Quartet adapters


S_Hinweise:
.DLLs to Allow Pager Gateway 2.0 to Use COM Ports Higher than Nine

S_Intern:
.DLLs to Allow Pager Gateway 2.0 to Use COM Ports Higher than Nine


S_Bezeichnung:
Software Release f. PRO/100 Mobile v1.0 - US

S_Hinweise:
EtherExpress(TM) PRO/100 Mobile Adapter 32-bit CardBus Driver Disks SW Rel. 1.0
[M32DISK1.EXE&M32DISK2.EXE]

EtherExpress(TM) LAN adapters
Software Release 1.0 for the EtherExpress(TM) PRO/100 Mobile Adapter 32-bit CardBus. This includes drivers for Microsoft NT*, Windows
95*, Novell NetWare* DOS Client, and NDIS 2 DOS clients. 

     M32DISK1 - Installation Disk: contains the DOS client setup program 
     M32DISK2 - Network Drivers Disk: contains all available adapter card drivers.


S_Bezeichnung:
Software Release f. PRO/100 Mobile 16-Bit

S_Hinweise:
EtherExpress(TM) PRO/100 Mobile Adapter 16-bit PC Card Driver Disks SW Rel. 1.0 [M16DISK1.EXE &
M16DISK2.EXE]

EtherExpress(TM) LAN adapters
Software Release 1.0 for the EtherExpress(TM) PRO/100 Mobile Adapter 16-bit PC Card. This includes drivers for Microsoft NT*, Windows
95*, Novell NetWare*, and NDIS 2 clients. 

     M16DISK1 - Installation Disk: contains the DOS client setup program. 
     M16DISK2 - Network Drivers Disk: contains all adapter card drivers.


S_Hinweise:
Pentium(R) OverDrive(R) Processor with MMX(TM) Technology Diagnostics [DIAGSMMX.EXE]

MMX(TM) Technology, Pentium(R) Pro processors, Pentium(R) processors
This file archive is a diagnostics program that enables you to test the Pentium(R) OverDrive(R) Processor with MMX(TM) Technology. It
includes a general instruction test, an MMX technology instruction test and an MMX technology performance test.


S_Bezeichnung:
Patch f. Audio on External Speakers v2.0a - US

S_Hinweise:
Fix for Answering Machine Not Playing Audio on External Speakers [AMAUDIO.EXE]

ProShare(R) conferencing
This is a self-extracting file for ProShare(R) Conferencing systems v2.0a. This patch resolves problems with some systems that can not play the
audio from a video voicemail message to external speakers.


S_Hinweise:
Patch for Connecting to H.320 Systems That Use the H.263 CAP Exchange [H263CAP.EXE]

ProShare(R) conferencing
This is a self-extracting file for ProShare(R) Conferencing systems v2.0 and 2.0a. This patch fixes some connection difficulties to H.320 systems
that use the H.263 CAP exchange.


S_Bezeichnung:
Drv.Set v4.3(2) LAN Supp.Softw. Disk 1 of 3 -US

S_Hinweise:
Smart LAN Support Software

			     Release 4.3(2)

		     Madge Networks       March 1996

		   -----------------------------------

	This  file describes release 4.3(2) of the Smart LAN Support Software for 
	the following Ringnodes:

	      Smart 16/4 EISA Ringnode     Smart 16/4 ISA Client Ringnode    
	      Smart 16/4 MC32 Ringnode     Smart 16/4 AT Ringnode
	      Smart 16/4 MC Ringnode       Smart 16/4 AT Plus Ringnode  
	      Smart 16 Ringnode            Smart 16/4 PCI Ringnode
	      Smart 16/4 PCMCIA Ringnode   Smart 16/4 PCI Ringnode (BM)
	      Smart 16/4 ISA Client Plus Ringnode
	      Smart 16/4 ISA Client PnP Ringnode

	Release 4.3(2) resolves all reported Fastmac Plus problems, which are 
	listed below . These problems occurred with a complex combination of 
	different vendors' hardware, software and enviromental conditions.
	There are no new features or functional improvements to the driver
	software.  
	----------------------------------------------------------------------

S_Intern:
LAN Support Software Release 4.3(2) disk 1 of 3


S_Hinweise:
driver file for new style Best PnP Fortress smart units


S_Hinweise:
Intel Smart Video Recorder III System Resource Viewer [SRV.EXE]

Smart Video Recorder
The System Resource Viewer is a simple utility that displays information about your system, including processor type, BIOS manufacturer and
version, memory, operating system, and devices installed. The utility allows you to save this information in a text file.


S_Bezeichnung:
Drv.Set v4.3(2) LAN Supp.Softw. Disk 2 of 3 -US

S_Intern:
LAN Support Software Release 4.3(2) disk 2 of 3


S_Bezeichnung:
Drv.Set v4.3(2) LAN Supp.Softw. Disk 3 of 3 -US

S_Intern:
LAN Support Software Release 4.3(2) disk 3 of 3


S_Hinweise:
TrueView Collage 250/280 Software Release
             =========================================

                 Copyright (c) Madge Networks 1996

This README file contains notes regarding the TrueView management 
product, the Collage 250/280 TrueView device manager and the Collage 
250/280 microcode.  The versions on this release are :-

        Collage 250/280 Microcode               Release 2.1.3
        TrueView                                Version 4.09
        Collage 250/280 TrueView Device Manager Version 1.02



TRUEVIEW
========


Installation
------------

To install TrueView Collage 250/280 Software, follow these steps:

1. Insert the TrueView disk 1 into the A: drive. There are three disks.
   Setup will prompt you to insert the second and third disks. 

2. From Windows' File Manager, display the files on the A: drive, and
   double-click on SETUP.EXE.

   Alternatively, from Windows' Program Manager, choose the "Run" option 
   from the "File" menu, and enter A:SETUP in the dialog box.

3. Note that to run SETUP you need at least 550k free disk space on a 
   local (non-network) drive (that is, a hard disk or RAM disk). Once
   installed, TrueView does not have this restriction.

S_Intern:
TrueView Collage 250/280 Software Release 2.1.3


S_Bezeichnung:
Update LPROTECT.NLM v3.01a -> v3.01d - US

S_Hinweise:
LANDesk(R) Virus Protect LPROTECT.NLM v3.01d [LDVP301D.EXE] 

LANDesk(R) Virus Protect software
This is a minor update to the LPROTECT.NLM shipped with LANDesk(R) Virus Protect v3.01a.
This update addresses:

1) Problem with WordPerfect file formats that could cause ABENDs. 

2) Catching files on rename for integrity shield and scanning files copied by 32 bit client software to the network.


S_Hinweise:
LANDesk(R) Virus Protect LPROTECT.NLM v4.0b [LDVP40B.EXE]

LANDesk(R) Virus Protect software
This is a minor update to the LPROTECT.NLM shipped with LANDesk(R) Virus Protect version 4.0.
This update addresses: 

1) Problem with WordPerfect file formats that could cause ABENDs. 

2) Catching files on rename for integrity shield and scanning files copied by 32 bit client software to the network.


S_Hinweise:
TrueView Collage 540 Manager For Windows Version 1.1
----------------------------------------------------

Release date: 29th November 1996

   Copyright (c) 1996 Madge Networks Ltd.


1. Disk Contents
2. Upgrade Instructions
3. New Functionality in the  Collage 540 V1.11 Microcode
4. ATM Interoperability Guidelines
5. Known Issues with Collage 540  V1.11 Microcode
6. Collage 540 Manager Limitations
7. Important Information Regarding Transparent Bridging
 7.1 Changing the Box Bridging Type 
 7.2 Madge Implementation Of Transparent Bridging
 7.3 Lan Emulation and Transparent Bridging
 7.4 Forwarding of 2-Byte RIF frames in Transparent Bridging Mode
8. Bugs fixed in the V1.11 Microcode since V1.0
9. Contacting Madge Networks

S_Intern:
TrueView Collage 540 Token-Ring To ATM Access Switch R1.1


S_Hinweise:
LANDesk(R) Virus Protect PSCAN.NLM v1.11 [PSCAN111.EXE]

LANDesk(R) Virus Protect software
This is the latest PSCAN.NLM. It fixes an ABEND situation that could occur if LANDesk(R) Virus Protect NLMs are installed to ring 3 of
Novell Netware v4.x. 

It has been certified by Novell (Certification Number: N250)


S_Bezeichnung:
Update Virus Detection Pattern v288 - US

S_Hinweise:
LANDesk(R) Virus Detection Pattern File 288 [UP288.EXE]

LANDesk(R) Virus Protect software
PLEASE READ THE IMPORTANT NOTICE in the README (UP288.TXT) file concerning LPROTECT v3.01a or prior 3.x versions. This
pattern should be used in conjunction with LANDesk(R) Virus Protect for NetWare* v3.01c or later or v4.0 or later, LANDesk Virus Protect
for Microsoft Windows NT* v1.6A or v1.7, and VSCAND r22. Pattern 288 enables the LANDesk virus protect scanning engines to detect
several new viruses.


S_Hinweise:
LANDesk(R) VSCAND 3.0 Release 22 [VSDR22.EXE]

LANDesk(R) Virus Protect software
LANDesk(R) Virus Protect software This file update contains VSCAND.EXE DOS Virus Scanner and associated .DLLs. This archive file also
contains pattern 206. See VSDR22.TXT for usage instructions.


S_Hinweise:
TrueView Collage 740 Manager For Windows Release 1.1
  ====================================================

  Release date: October 1996

  Copyright (c) 1996 Madge Networks Ltd.


1.  Disk Contents
2.  Installing TrueView
3.  Upgrading from Microcode Version 1.0.x
4.  Upgrading from Microcode Version 1.1.x
5.  New Functionality in the Collage 740 V1.1.7 Microcode
6.  Collage 740 V1.1.7 Microcode Limitations
7.  Collage 740 Manager Limitations
8.  Collage 740 Manager Undocumented Feature
9.  Addendum to the Manual - 'Working with PDR' 
10. ATM Interoperability Guidelines

Please read all of this file as some of the TrueView limitations are relevant 
when downloading new microcode to your Collage 740 Switch.

  1) Disk Contents
  ================


S_Hinweise:
disk32-1.zip    
Ver. 3.20, Diskette #1 of PCnet family drivers.
Contains AMinstal, LAN Manager, NetWare ODI, Packet, WFW31, WFW311 and WIN95 driver. Use PKUNZIP -d to extract.

disk32-2.zip    
Ver. 3.20, Diskette #2 of PCnet family drivers.
Contains DMI support modules, NDIS2 for IBM, SCO, UnixWare PCNFS, LAN Server, WINNT3.50-4.00 driver. Use PKUNZIP -d to extract.

disk32-3.zip    
Ver. 3.20, Diskette #3 of PCnet family drivers.
Contains, BootRom, DOCs, PCLAPP.COM, Novell support files,
Packet driver source code.Use PKUNZIP -d to extract.


S_Hinweise:
Collage 740 Backbone ATM Switch Installation Guide

S_Intern:
Collage 740 Backbone ATM Switch Installation Guide


S_Bezeichnung:
PDF File Collage 740 Backbone S/W v1.1 -US

S_Hinweise:
Collage 740 Backbone ATM Switch Guide S/W R1.1

S_Intern:
Collage 740 Backbone ATM Switch Guide S/W R1.1


S_Hinweise:
Problem mit lokalen Ports (LPT) unter Win NT

S_Intern:
Problem mit lokalen Ports (LPT) unter Win NT


S_Hinweise:
Collage 740 Option Cards Installation Guide

S_Intern:
Collage 740 Option Cards Installation Guide


S_Hinweise:
Fehlermeldung: RPC Interface konnte nicht initialisiert werden.

S_Intern:
Fehlermeldung: RPC Interface konnte nicht initialisiert werden.


S_Bezeichnung:
PDF File Collage 740 LAN Emulation v1.1 -US

S_Hinweise:
Collage 740 LAN Emulation Services Guide S/W R1.1

S_Intern:
Collage 740 LAN Emulation Services Guide S/W R1.1


S_Hinweise:
NetWare MultiProtocol Router for ISDN v2.11 Update


S_Bezeichnung:
PDF File Backup PSU Installation Guide -US


S_Hinweise:
RPC Problem auf Client und Server behoben.

S_Intern:
RPC Problem auf Client und Server behoben.


S_Hinweise:
TrueView Ringbridge Software Release 3.0B
                 =========================================

                  Copyright (c) Madge Networks Ltd. 1996

INSTALLATION
------------

To install TrueView and Bridge Manager, follow these steps:

1. Insert the disk into drive A:

2. From Windows' File Manager, display the files on the A: drive, and
   double-click on SETUP.EXE.

   Alternatively, from Windows' Program Manager, choose the "Run" option from
   the "File" menu, and enter A:SETUP in the dialog box.

3. Note that SETUP requires at least 550k free disk space on a local
   (non-network) drive (ie. a hard disk or RAM disk) in order to run. Once
   installed successfully, TrueView itself does not have this restriction.

S_Intern:
TrueView Ringbridge Software Release 3.0B


S_Bezeichnung:
Centr. Console V1.60A.E Serv. Pack 1 - US

S_Hinweise:
StorageExpress (TM) Central Console V1.60A.E. Service Pack 1 [160SP1.EXE]

StorageExpress(TM) systems
Intel StorageExpress(TM) Central Console V1.60A.E. Service Pack 1. This service pack contains updated TSA, SMDR, and SPXS files.
Various reliability issues have also been addressed by this service pack.


S_Bezeichnung:
TrueView Smart Ringswitch v3.00 (WIN) -US

S_Hinweise:
TrueView Ringswitch Software Release 3.0
               ========================================
                Copyright (c) Madge Networks Ltd. 1997

Installation
------------
To install the TrueView Ringswitch software release 3.0, follow these
steps:

1. Insert the TrueView disk 1 into the A: drive.

2. From Windows File Manager, display the files on the A: drive, and double-
   click on SETUP.EXE.  Alternatively, from Windows Program Manager, choose
   the "Run" option from the "File" menu, and enter A:\SETUP in the dialog
   box.

3. Note that to run SETUP you need at least 550k free disk space on a local
   (non-network) drive (that is, a hard disk or RAM disk).  Once installed,
   TrueView does not have this restriction.


                New Features in Ringswitch Release 3.0
                ======================================

New Binaries
------------
- Ringswitch microcode .......... version 3.06
- Ringswitch boot ROM upgrade ... version 3.01.06
- Ringswitch FDDI microcode ..... version 2.08
- Ringswitch ATM microcode ...... version 1.08

S_Intern:
TrueView Smart Ringswitch Software Release 3.00


S_Bezeichnung:
Update f. Centr. Console Incorrect Date - US

S_Hinweise:
StorageExpress(TM) Central Console v1.60 A.E. - Update for Incorrect Date [CENTDATE.EXE]

StorageExpress(TM) systems
This archive contains the files necessary for installing the update that fixes the erroneous date displayed in the Acitvity Log report and
Configuration Menu display.


S_Hinweise:
NetWare MultiProtocol Router for ISDN v3.0 Update


S_Hinweise:
StorageExpress(TM) System v2.0 9608 Firmware Upgrade Utility [FIRMWARE.EXE]

StorageExpress(TM) systems
StorageExpress(TM) system v2.0 9608 upgrade utility allows upgrade of all DDS2 tape drives to the current firmware revision, 9608. Intel
highly recommends you upgrade all DDS2 tape drives to this latest revision. It significantly reduces tape drive head and media wear. 

NOTE: This is ONLY for v2.0. If you are not currently running v2.0, you can upgrade to revision 9608 firmware by applying Central Console
v1.60A.E. Service Pack 1, 160SP1.EXE, to a system running Central console 1.60 A.E.


S_Hinweise:
TrueView Smart Ringswitch Software User Guide for release 3.0

S_Intern:
TrueView Smart Ringswitch Software User Guide for release 3.0


S_Hinweise:
StorageExpress(TM) v2.0, ARCserve 6.0 CHANGER.NLM Update [SEV2CHGR.EXE]

StorageExpress(TM) systems
This fixes an issue where the CHANGER.NLM would not re-inventory the tape magazine after reinserting it into the Autochanger without
restarting ARCserve, via the Scheduler console. See README.TXT for additional details/issues.


S_Hinweise:
LAN support OBJ,LAN,BIN files for use with smartlsp

S_Intern:
LAN support OBJ,LAN,BIN files for use with smartlsp


S_Hinweise:
NetWare MultiProtocol Router for ISDN (MPR for ISDN) v3.1 Update

Abstract: M31E-03.EXE (ISDNCCA.NLM dated 03/06/97) includes new features 

such as support for D64SD connections and the AVM ISDN-Controller 

T1-B, multiple enhancements and fixes as well as a number of updated Novell files.


S_Hinweise:
Madge FDDI Release 2.10 : NDIS 2.x
==================================                      September 1995
                                                        ==============

This  disk  contains  the  Madge  FDDI  Release  2.10  NDIS  2.x   and
remotebooting support. The NDIS 2.x driver support includes :

IBM LAN Server 2.0, 3.0, 4.0
IBM Extended Services 1.0
Microsoft LAN Manager 2.x
Microsoft Windows For Workgroups 3.1, 3.11

The remotebooting support is only for RPL and includes :

NetWare RPL
IBM LAN Server RPL
Microsoft LAN Manager RPL
Windows/NT RPL


For complete details, see the manual that  accompanies  this  release.
For  the  latest  information,  ammendments and additions, see the INF
files in the INFO directories on all disks.


S_Bezeichnung:
Drv. NDIS Piranha SwitchNIC (WIN NT) -US

S_Hinweise:
Windows NT NDIS driver for Piranha SwitchNIC for versions

S_Intern:
Windows NT NDIS driver for Piranha SwitchNIC for versions


S_Bezeichnung:
Drv.Set v2.1 FDDI LAN Supp.Softw. Disk 1 of 3 -US

S_Intern:
FDDI LAN Support Software Rel. 2.1 Disk 1


S_Bezeichnung:
Drv.Set v2.1 FDDI LAN Supp.Softw. Disk 2 of 3 -US

S_Intern:
FDDI LAN Support Software Rel. 2.1 Disk 2


S_Bezeichnung:
Drv.Set v2.1 FDDI LAN Supp.Softw. Disk 3 of 3 -US

S_Intern:
FDDI LAN Support Software Rel. 2.1 Disk 3


S_Bezeichnung:
Drv. NDIS 3 Shark 100 SwitchNIC  (WIN NT) -US

S_Hinweise:
Matrox Shark-100 SwitchNIC 100/4/CWindows NT NDIS 3 driver for versions 3.51 and 4.0

S_Intern:
Matrox Shark-100 SwitchNIC 100/4/CWindows NT NDIS 3 driver for versions 3.51 and 4.0


S_Hinweise:
LANDesk(R) Management Suite 2.51 - Software Distribution Update [DISTLIB1.EXE]

LANDesk(R) Management Suite
This archive contains a new SDREPORT.EXE which now allows Software Distribution jobs to be rescheduled by making selections from the
Distribute report.


S_Bezeichnung:
Integration Kit f. Server Manager PRO - US

S_Hinweise:
LANDesk(R) Management Suite/Server Manager Pro Integration Kit [LDMS_SMP.EXE]

LANDesk(R) Management Suite
This archive contains files to integrate LANDesk(R) Server Manager Pro v2.51 and LANDesk(R) Management Suite v2.5x. Detailed
instructions can be found in the README.TXT included in the self-extracting archive.


S_Hinweise:
Shark-100 MultiportWindows NT Driver for versions 3.51 and 4.0

S_Intern:
Shark-100 MultiportWindows NT Driver for versions 3.51 and 4.0


S_Hinweise:
Integrating LANDesk(R) Server Manager into LANDesk(R) Management Suite 2.51 [LDSMPINT.EXE]

LANDesk(R) Management Suite
This self-extracting file contains a Microsoft* WORD document and a plan text file with information on how to integrate LANDesk(R) Server
Manager Pro into a server which already has LANDesk(R) Management Suite 2.51 on it. It also contains a utility (SM-AMS.EXE) referenced in
the document.


S_Hinweise:
Shark-100 MultiportDriver for Novell NetWare ODI driver for

S_Intern:
Shark-100 MultiportDriver for Novell NetWare ODI driver for


S_Hinweise:
LANDesk(R) Management Suite 2.51 - Software Metering Update 2 [METRLIB2.EXE]

LANDesk(R) Management Suite
This library contains files that address the following: 

     Server performance may be impacted by the bindery calls made by METERW(IN or 95).EXE to RELAY.NLM if a very large number of
     users are attached to a single file server. 
     In rare instances, METERW(IN or 95).EXE causes a General Protection Fault. 
     Lotus Notes 4.x Page Faults when executed with METERW95.EXE loaded. 
     Some 16-bit applications, running in Windows 95*, may time out when printing the first time if WINTER.DLL is loaded. 
     The server ABENDS when unloading RELAY.NLM if running Novell NetWare* v4.11, or v4.10 with Novell's LIBUP9.EXE set of
     patches installed. 
     User group candidate list is limited in size. 
     Metering applications launched from the Startup group or from the Load = or Run= line in the WIN.INI file. 
     32-bit applications that are launched by file extension association are not metered properly. 
     The version of WINTER95.DLL included in METRLIB1.EXE could produce the the error, "Failed to make a 32bit call to
     HookOnCreateProcess."


S_Bezeichnung:
Utility Remote Control and Inventory - US

S_Hinweise:
NT Remote Control and Inventory [NTVIEW.EXE]

LANDesk(R) Management Suite
This file archive enables you to inventory and remotely manage Windows NT* servers and workstations from your LANDesk(R) Management
Suite Windows 95* management console. It includes the remote control, execute, and boot functions as well as chat, file transfer, and inventory
scanning.


S_Hinweise:
ATM Adapters LAN Emulation Software


                                Release 1.1(2) 


                          Madge Networks  November 1996

                      ------------------------------------


This file describes release 1.1(2) of the Madge LAN Emulation Software 
for the following MADGE ATM adapters :-


Collage 25 PCI Client          - High Performance 25Mbps client adapter
Part No 32-00                    optimized for low cost workstations.

Collage 155 PCI Server         - Very high Performance 155Mbps adapter
Part No 32-01/32-02              with very low host utilisation optimized
                                 for servers and high end workstations. 
  
Collage 155 PCI Client         - Low cost 155Mbps client adapter designed
Part No 32-03/32-04              for mid range workstations that require
                                 155Mbps desktop performance. 

Collage 155 EISA Server        - Very high Performance 155Mbps adapter
Part No 32-05/32-06              with very low host utilisation designed
                                 for use only in EISA BUS Server machines.


The following table shows a breakdown of the operating systems supported for
Ethernet and Token-Ring LANE :-


S_Bezeichnung:
Drv. Shark 100 Multiport NIC+ (WIN NT) -US

S_Hinweise:
Shark-100 Multiport NIC+Windows NT Driver for versions 3.51 and 4.0

S_Intern:
Shark-100 Multiport NIC+Windows NT Driver for versions 3.51 and 4.0


S_Hinweise:
NetportExpress(TM) PRO and PRO/100 Print Server v4.33 [NPPRO.EXE]

NetPort(R) print servers
This self-extracting archive provides v4.33 software for all models of the NetportExpress(TM) PRO and NetportExpress PRO/100 print
servers.


S_Hinweise:
NetportExpress(TM) XL/EL v3.24 Update [NPX324.EXE]

NetPort(R) print servers
This is the latest software for NetportExpress(TM) XL/EL print servers. See the README for installation instructions.


S_Hinweise:
Shark-100 Multiport NIC+Novell NetWare Driver for versions 3.1x and 4.x, SFTIII and

S_Intern:
Shark-100 Multiport NIC+Novell NetWare Driver for versions 3.1x and 4.x, SFTIII and


S_Bezeichnung:
Drv.Shark-100 SwitchNIC 100/4/C (NOV) -US

S_Hinweise:
Matrox Shark-100 SwitchNIC 100/4/CNovell Netware versions 3.1x and 4.x for Shark Switch SwitchNIC.

S_Intern:
Matrox Shark-100 SwitchNIC 100/4/CNovell Netware versions 3.1x and 4.x for Shark Switch SwitchNIC.


S_Hinweise:
Novell NetWare versions 3.1x and 4.0 driver for Piranha 
Supports up to 4 Piranhas in same computer
Includes mib


S_Hinweise:
File contains the NDC client components in VxD technology for Windows 95 for use with COMMON-ISDN-API-based applications.


S_Hinweise:
LANDesk(R) Support Center Jump Starts February Update [JUMPSLIB.EXE] 

LANDesk(R) Software
This self-extracting archive contains the files needed to update LANDesk(R)Support Center Jump Starts. A detailed description of installing this
update, as well as other Jump Starts information, is included in the JUMPSLIB.TXT file included in the archive.


S_Hinweise:
LANDesk(R) Server Manager OEM 2.52 Fix [SM252P1.EXE]

LANDesk(R) Software
LANDesk Server Manager OEM 2.52 fix - ONLY for OEM users of CD Part# 658519-002.

This file, SM252P1.EXE, is to fix an OEM version of LANDesk Server Manager, V2.52 (658517-002). DO NOT install this fix unless V2.52
was installed from a CD with p/n#658519-002 and it was received when the server was purchased.

IMPORTANT:
Do not attempt to install this if you have a retail version of LANDesk Server Manager Pro, such as 2.51. Applying it on the retail version will
cause it to immediately fail. Do not apply this patch on top of LANDesk Management Suite.

If you are not sure if this file is for you, contact your server manufacturer to verify that this will work with your version of Server Manager.


S_Bezeichnung:
Utility Server Manager PRO SMM Diag. - US

S_Hinweise:
LANDesk(R) Server Manager Pro SMM Diagnostic Utility [SMM4_38.EXE]

LANDesk(R) Software
Diagnostic utility for LANDesk Server Manager Pro Server Monitor Module (SMM). See the README for useage instructions.


S_Bezeichnung:
Upgrad Lanspool for LAN Man. v3.0->v3.02 - US

S_Hinweise:
LANSpool for LAN Manager 3.0 to 3.02 Upgrade [SPL302.EXE]

LAN Software
This contains the LANSpool for LAN Manager 3.0 to 3.02 upgrade. For 3.0 customers only.


S_Hinweise:
ODIKTx contains the latest ODI 3.31/1.11 support modules (NBI, MSM, TSMs, etc.)
for both Novell file servers and clients.  This file also contains LAN drivers
written by Novell, but does not contain any third party drivers.  These latest
ODI 3.31/1.11 support modules will support 32-bit LAN drivers written to the
"C" spec V1.11, or the Assembly spec V3.31 or V3.30; and most 32- bit LAN
drivers written to the Assembly spec v3.20.  16-bit Client drivers written to
the 16-bit spec V4.00 are also supported with Client32.


S_Hinweise:
Network Distributed CAPI - NDC for Windows 3.x with support for the Microsoft Network.

File contains the latest NDC components in VxD technology for Windows 3.x clients for use with both NetWare Connect for ISDN(NWCI v1.0 and v2.0) and Network Distributed ISDN for Windows NT (NDI v1.0).


S_Hinweise:
This file contains the Modular versions of CLIB and DSAPI.  These versions are
for 4.10, NW 4.10 for OS/2, 4.10 SFT3 , 4.11 NW 4.11 for OS2, 4.11 SFT3 and
4.11 SMP only.  The modular CLIB/DSAPI found in the 4.x directory  have NOT
been tested on the NetWare 3.x platform.

 The files for NetWare 3.x servers are contained in the 3.x directory. The
files in the 3.x directory have not changed in this release from the previous
versions.  The last change to the 3.x CLIB files were LIBUP6.EXE.


S_Hinweise:
Network Distributed CAPI - NDC for Windows NT 4.0 workstations (update).

File contains the NDC client components for Windows NT 4.0 workstations for use with COMMON-ISDN-API based applications


S_Hinweise:
Client Push Agent for NetWare v2.01 for ARCserve 6.0 NT


S_Hinweise:
This download provides updated files used for SMS functions such as Sbackup or
NetWare Navigator.  These files are identical with those files tested and
released in NetWare 4.11.  Readmes are also included which deal with disaster
recovery strategies for NDS.  DSBACKER.NLM for NetWare v4.10 is also included.


S_Bezeichnung:
Update 100Base-TX/T4 NMM-Image v1.1 - US

S_Hinweise:
Express 100BASE-TX and 100BASE-T4 Stackable Hub Network Management Module (NMM) Image v1.1
[HUB1IMG.EXE]

Hubs and Switches
Express 100BASE-TX Stackable Hub Network Management Module (NMM) image version 1.1. This updated image adds support for the
Express 100BASE-T4 Stackable Hub and the 100BASE-TX 12 port expansion module.


S_Hinweise:
ASNT.pdf		
ARCserve Info Database (also available via http://www.cheyenne.com )
FAQ.pdf			
Frequently Asked Questions for ARCserve 6.0 for Windows NT
Options.pdf		
Cheyenne InfoFax for Storage Options for ARCserve NT
Dsas6nt.pdf		
Data Storage Management for ARCserve 6 NT


S_Hinweise:
Express 100BASE-TX and 100BASE-T4 Stackable Hub Network Management Module (NMM) MIB
[HUB1MIB.EXE]

Hubs and Switches
Express 100BASE-TX Stackable Hub Network Management Module (NMM) Private MIB. Must have Express Stackable Hub NMM to use
this MIB to manage Express 100BASE-TX Stackable Hubs.


S_Hinweise:
Seagate AshWin for Windows 95 or Windows NT (32-bit) 30-day trial version in a self-extracting archive (v3.51).INSTALLATION NOTES:
· In order to install AshWin, you must have Administrator privileges on the local machine or its domain. 
· AshWin should not be installed on the root directory of a drive or on a removable drive.
· From the Run dialog box, run AshWin35.exe using the appropriate drive letter for your situation. AshWin35.exe is a self-extracting exe that will run setup.exe.
· When asked to enter your Registration Key, please enter the following string in lower case letters as shown below:

ah6k-r7y$-z3xp-px6p-pcpp-c6t4-z2v3-c8ud
     
This Registration Key authorizes 5 machines and 5 monitors. It will be good for 30 days from the time it is activated.


S_Hinweise:
Novell NetWare(TM) HUBCON.NLM v2.0 for the EtherExpress(TM) TPE 10BASE-T Hub
============================================================================

HUBCON.NLM      8/25/92  233,055
HSL.NLM		8/25/92   57,133



What is HUBCON?
----------------
HUBCON Management Console Software is a Novell NLM (Netware Loadable Module) 
that you can use to manage EtherExpress TPE Hubs installed in a Netware 
3.11 server.  EtherExpress TPE Hub Adapter boards include a copy of HUBCON 
software.  EtherExpress TPE Expansion Hub Boards do not include HUBCON software.
If you have hubs with only EtherExpress Hub Expansion boards, a separate product 
"Netware Hub Services" that includes HUBCON can be purchased from Novell to 
manage these hubs.


S_Hinweise:
This file contains a new TCPIP.NLM (v4.00) that runs on all LAN (3.12,4.x) and
WAN (MPR 3.x) platforms.
 (Obsoletes TCPN02.EXE)


S_Bezeichnung:
Drv. NetWAYS/ISDN v3.0 Rel. 1 (WIN 95/NT) - US


S_Hinweise:
Service Pack 1 Englisch (Not for LiveTrial)


S_Hinweise:
The self-extracting zip file contains an updated version of the Novell
 Labs "Tested and Approved " LAN drivers shipped with IntranetWare I.


S_Hinweise:
Intel LANDesk(R) Network Manager v1.1 [LDNMDISK.EXE]

LANDesk(R) Software, Hubs and Switches
Intel LANDesk(R) Network Manager is a Windows-based tool for viewing, configuring, monitoring and managing Intel Express 10/100
Stackable Hubs and Express 10/100 Fast Ethernet Switches. SNMP-based communications also let you discover, map and manage any other
products with SNMP-compliant MIBs. 

Note: This on-line version of Intel LANDesk Network Manager is provided for customers who have already purchased Intel LANDesk
Network Manager and cannot install it from CD-ROM. You will be prompted for a serial number from your original Intel LANDesk Network
Manager CD-ROM during installation.


S_Bezeichnung:
Update 100Base-TX Switching HUB MIB - US

S_Hinweise:
Express 100BASE-TX Switching Hub MIB [SWCH1MIB.EXE]

Hubs and Switches
Express 100BASE-TX Switching Hub MIB for SNMP-compliant Network Management Software (NMS). 

Complies to RFC 1155 SMI, RFC 11221123 Internet Hosts, RFC 1155 SMI, RFC 1157 SNMP, RFC 1213/1513 MIB II, RFC 1398
Ethernet, RFC 1493 Bridge, RFC 1556 MIB, RFC 1757 RMON, and RFC 768/950/1071/791 UDP/IP standards.


S_Bezeichnung:
Update Express 10/100 Fast Ether. MIB - US

S_Hinweise:
Express 10/100 Fast Ethernet Switch MIB [SWCH2MIB.EXE]

Hubs and Switches
Express 10/100 Fast Ethernet Switch private MIB for SNMP-compliant Network Management Software (NMS). 

Complies to RFC 1155 SMI, RFC 11221123 Internet Hosts, RFC 1155 SMI, RFC 1157 SNMP, RFC 1213/1513 MIB II, RFC 1398
Ethernet, RFC 1493 Bridge, RFC 1556 MIB, RFC 1757 RMON, and RFC 768/950/1071/791 UDP/IP standards.


S_Hinweise:
Service Pack 1 German (Not for LiveTrial)


S_Bezeichnung:
Device View f. Express 10 Switch(+) - US

S_Hinweise:
Intel Device View for Express 10 Switch and Express 10 Switch+ [IDVSWCH1.EXE - IDVSWCH3.EXE]

Hubs and Switches
This three disk set contains Intel Device View for the Express 10 Switch and Express 10 Switch+. Intel Device View can be used to configure
and manage the Express 10 Switches from a Windows NT* or Windows 95* workstation configured with TCP/IP. 

Note: Intel Device View cannot be used to configure the Express 10/100 Fast Ethernet Switch or the Express 100BASE-TX Switching Hub.


S_Hinweise:
AS6.pdf			Product Sheet ARCserve 6.0
Options.pdf		Product Sheet Storage Options ARCserve 6.0
Storage.pdf		Product Sheet generell Options ARCserve 6.0


S_Bezeichnung:
Troubleshooting High Utilization for NW 4

S_Hinweise:
This file contains documentation on troubleshooting high utilization for
Netware 4.x and IntranetWare.  This document comes in a runtime version of
Envoy and does not need the Envoy software installed to view and print. 
Windows is required.


S_Hinweise:
Current release of TCPIP.NLM for Client32 (Dos/Win31).  Resolves many issues
and adds more robust DHCP functionality.  Also included are the current
Winsock.dll and Wlibsock.dll.


S_Bezeichnung:
Upgrade WinINSTALL 5.1 Build 16>20  (WIN95) -US


S_Bezeichnung:
Upgrade WinINSTALL 5.1 Build 19>20 (WIN95) -US


S_Hinweise:
Willkommen bei IBM Database Server fr Windows** 95 & Windows NT**
                                      Fixpak 8127

+--Hinweis: ------------------------------------------------------------+
|
| Nach der Installation mssen Sie die DB2-Dienstprogramme erneut an
| alle Datenbanken binden. Weitere Informationen hierzu finden Sie in
| Abschnitt 2.2.
|
| Wenn Sie nach dem 1.10.97 Zwischenberichtigungen von der IBM
| Untersttzungsfunktion erhalten haben, sollten Sie nach der
| FixPak-Installation eine aktualisierte Version der
| Zwischenberichtigungen von der IBM Untersttzungsfunktion anfordern.
| Auf diese Art knnen Sie sicherstellen, daá sich Ihr System in einem
| konsistenten Zustand befindet und keine Berichtigungen
| verlorengegangen sind.
|
+-----------------------------------------------------------------------+


S_Hinweise:
Welcome to IBM Database Server v4 for NT/95 - Fixpak 8127

+-- Note: ----------------------------------------------------------------+
|
| After installation is complete, you will need to re-bind the DB2
| utilities against all of your databases.  Refer to section 2.2 for
| details.
|
| If you have received interim fixes from IBM support after 1/10/97,
| then you should contact IBM support after the FixPak installation, to
| request an updated version of the interim fixes.  By doing this, you
| are assured that your system is in a consistent state and no interim
| fixes are lost.
|
+-------------------------------------------------------------------------+

For installation instructions please see section 2.1


S_Hinweise:
Willkommen bei IBM Database Server Version 4 fr OS/2 WARP - FixPak 8132

+--Hinweis: ------------------------------------------------------------+
|                                                                       
| Nach der Installation mssen Sie die DB2-Dienstprogramme erneut an    
| alle Datenbanken binden. Weitere Informationen hierzu finden Sie in   
| Abschnitt 2.2.                                                        
|                                                                       
| Wird unter OS/2 Version 2 installiert, ist das OS/2-FixPak 108 (oder ein
| spteres FixPak) mit APAR PJ23417 erforderlich. Fr OS/2 Warp Version 3
| ist FixPak 24 (oder ein spteres FixPak) mit APAR PJ22651 erforderlich.
| Fr OS/2 Warp Version 4 ist kein FixPak erforderlich.
|
| Wird NetFinity eingesetzt (in diesem Fall enthlt die Datei CONFIG.SYS
| einen Eintrag NFDASD.FLT), muá NetFinity mit APAR IX61919 aktualisiert
| werden.
| Wenn Sie nach dem 1.10.97 Zwischenberichtigungen von der IBM          
| Untersttzungsfunktion erhalten haben, sollten Sie nach der           
| FixPak-Installation eine aktualisierte Version der                    
| Zwischenberichtigungen von der IBM Untersttzungsfunktion anfordern.  
| Auf diese Art knnen Sie sicherstellen, daá sich Ihr System in einem  
| konsistenten Zustand befindet und keine Berichtigungen                
| verlorengegangen sind.                                                
|                                                                       
+-----------------------------------------------------------------------+

Die Installationsanweisungen befinden sich in Abschnitt 2.1.


S_Hinweise:
Welcome to IBM Database Server v4 for OS/2 WARP - FixPak 8132

+-- Note: ----------------------------------------------------------------+
|
| After installation is complete, you will need to re-bind the DB2
| utilities against all of your databases.  Refer to section 2.2 for
| details.
|
| If installing on OS/2 V2, there is a requirement for OS/2 FixPak 108 or 
| later, containing APAR PJ23417, to be installed.  For OS/2 V3, FixPak 24
| or later, containing APAR PJ22651, is required.  No FixPak is required 
| for OS/2 V4.
|
| For those customers using NetFinity software (check for NFDASD.FLT in
| Config.SYS), NetFinity must be updated to include APAR IX61919.
|
| If you have received interim fixes from IBM support after 01/10/97,
| then you should contact IBM support after the FixPak installation, to
| request an updated version of the interim fixes.  By doing this, you
| are assured that your system is in a consistent state and no interim
| fixes are lost.
|
+-------------------------------------------------------------------------+


S_Bezeichnung:
Patch tapesvr.nlm , standard.nlm v6.00 - US


S_Bezeichnung:
MIB - Files BIANCA/BRICK-X25 Rel. 4.4.4.1


S_Hinweise:
DSRights is a utility that displays the Directory Services rights one object
has to another and how the rights were derived from the tree.


S_Hinweise:
Blue+ Software

			    Release 2.10

		  Madge Networks       May 1996

		 -----------------------------------

This file describes the  features  of  release  2.10  of  the  Blue+
Software for the following Token Ring Network Interface adapters:

        Blue+ ISA 16/4 PnP.

        Blue+ ISA 16/4.
        
        All Madge Straight Blue adapters.
        
        All  IBM  ISA  or  MC  shared  memory  Token  Ring  and   100%
        compatible adapters, including the IBM Auto ISA 16/4.
        
        
The Blue+ Software
------------------

The  Blue+  Software  provides  improved  performance  for  your IBM and
Compatible Token Ring adapters. On Madge Straight Blue adapters and  on  the
IBM Auto 16/4 adapter, the Blue+ drivers have been observed to provide more
than twice the throughput of the equivalent IBM drivers.

On the Blue+ adapter, the drivers can  use  an  extra  "Fast  Blue"  mode which
IBM adapters and Straight Blue adapters do  not  have.  In  Fast  Blue mode,
the Blue+ drivers are typically 60-100% faster than equivalent IBM drivers at
copying files.

S_Intern:
NDIS2 for OS/2 (MS LAN Manager directory structure)


S_Bezeichnung:
Drv. NDIS IBM LAN Server v2.10 (OS/2) -US

S_Intern:
NDIS2 for OS/2 (IBM LAN Server directory structure)


S_Intern:
NDIS support for Windows NT 3.1 / 3.5, Windows 95 and Workgroups


S_Hinweise:
Installation for OS/2 NDIS 2 driver with IBM products

S_Intern:
Installation for OS/2 NDIS 2 driver with IBM products


S_Hinweise:
IntranetWare Support Pack v2.0. This file contains a comprehensive set of
updates for all of the services contained in the IntranetWare box (NetWare
4.11, NIAS 4.0, NetWare MPR 3.0 & 3.1, NetWare/IP, NetWare Web Server, LAN
drivers, etc.). It features an integrated installation program. The patches
contained in the IntranetWare Support Pack have undergone rigorous testing.
This testing includes component testing, core OS testing, and integration
testing with other Novell products.


S_Hinweise:
NAL v1.11 contains exactly two updates from NAL v1.1.  The NWAPP.DLLs were
updated so that
 1.  Applications may be created with UNC pathnames to any server, providing
that the appropriate client supports the  Windows WNET API, i.e. Windows NT,
providing the appropriate MS Client is installed
 2.  NAL will correctly detect if the schema needs to be extended when the Base
Class of the User object contains a large number of extensions, i.e. CallWare
 NAL v1.11 is not required if the administrator is not experiencing the two
problems detailed above


S_Hinweise:
Remote CAPI für Novell Netware 3.1x and 4.x
Installationsskript, Kurzanleitung und Netware NLMs für die Remote-CAPI-Unterstützung.

README.TXT (4kB, 30.04.97) - kurzer ASCII-Text mit Installationshinweisen.
makedisk.bat (1kB, 30.04.97) - Batchdatei zum Erzeugen der Installationsdiskette
Rbricapi.nlm (21kB, 30.04.97) - CAPI-NLM für Netware 3.1x und 4.x.
Rbri2drv.nlm (27kB, 30.04.97) - CAPI-Manager-Driver
Rbri2mgr.nlm (29kB, 30.04.97) - CAPI-Manager-Ersatz
pinstall.nlm (23kB, 30.04.97) - Hilfs-NLM für die Installation
filedata.dat (1kB, 30.04.97) - Hilfsdatei für die Installation
      
Nlmdisk.zip (34kB, 30.04.97) - ZIP-Archiv mit allen Dateien außer makedisk.bat.


S_Hinweise:
This file contains an upgrade from NAL v1.1 to NAL v1.11.  The NWAPP.DLLs were
updated so that
 1.  Applications may be created with UNC pathnames to any server, providing
that the appropriate client supports the  Windows WNET API, i.e. Windows NT,
providing the appropriate MS Client is installed
 2.  NAL will correctly detect if the schema needs to be extended when the Base
Class of the User object contains a large number of extensions, i.e. CallWare
 These files are not necessary if the administrator is not experiencing  the
two problems above


S_Hinweise:
These are archives that includes the ROM binary for your SupraFAXModem SupraSonic 336V+.

S_Intern:
These are archives that includes the ROM binary for your SupraFAXModem


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 4.11
IntranetWare

ABSTRACT:

The self-extracting zip file DSKDRV.EXE contains an updated version of the
Novell Labs "Tested and Approved " Disk drivers shipped with IntranetWare I.


S_Hinweise:
InocuLAN Version 4.0
       Copyright 1996 by Cheyenne Division of Computer Associates
  Cheyenne Division                    TEL (516) 465-5000
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 465-3900
  USA                                   CompuServe:  GO CHEYENNE
                                        InocuLAN BBS: (516) 465-3930
                                        WEB SITE: WWW.CHEYENNE.COM
                                        Technical Support: (800) 243-9832
                                        Sales: (800) 243-9436
  =======================================================================

  InocuLAN v4.0 has been updated to incorporate new virus scanning
  signatures (v3.27) and performance improvements. 

  This distribution of files can be used to update InocuLAN v4.0 initial
  release (signature 3.11) to the current baseline of 3.27.

  Note: These files update InocuLAN version 4.0, and cannot be used to
  update InocuLAN version 2.5 or 3.0.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
Web Server IW 2.51
Web Server - Web 2.51

ABSTRACT:

General release kit for the NetWare Web Server 2.51 (IntranetWare and NetWare
4.11).


S_Bezeichnung:
Virus signature v3.27 IL1.0 (WIN95) - US

S_Hinweise:
InocuLAN v1.0 for Windows 95
	      Cheyenne AntiVirus v4.0 & v1.0 for Windows 95
	 Copyright 1996 by Cheyenne Division of Computer Associates

  Cheyenne Division                     TEL (516) 465-5000
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 465-3900
  USA                                   CompuServe:  GO CHEYENNE
                                        InocuLAN BBS: (516) 465-3930
                                        WEB SITE: WWW.CHEYENNE.COM
                                        Technical Support: (800) 243-9832
                                        Sales: (800) 243-9436

  =====================================================================

  This is a regular virus signature update for InocuLAN v1.0; Cheyenne 
  AntiVirus v1.0; and Cheyenne AntiVirus v4.0 for Windows 95. This set 
  of files will update your system to version 3.27.


S_Hinweise:
InocuLAN Version 3.0
		Copyright 1996 by Cheyenne Software, Inc.
  Cheyenne Software, Inc.               TEL (516) 465-5000
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 465-3900
  USA                                   CompuServe:  GO CHEYENNE
                                        InocuLAN BBS: (516) 465-3930
                                        WEB SITE: WWW.CHEYENNE.COM
                                        Technical Support: (800) 243-9832
                                        Sales: (800) 243-9436

  =======================================================================
  
  InocuLAN v3.0 has been updated to incorporate new virus scanning
  signatures (v2.56). Note:v2.54 and v2.55 signatures were skipped and NOT
  released.
    
  Did you know that Cheyenne is now shipping InocuLAN 4.0 for NetWare?  

  This new release includes a host of new features including a new, state-of-
  the-art engine for detecting and curing viruses, support for NetWare 4.1
  and much more.  A complete list of new features can be found at the bottom
  of this document.  Call Cheyenne at (800) CHEY INC (800-243-9462) for 
  upgrade information.

  Cheyenne will also soon ship our AntiVirus Agent for Lotus Notes.  This 
  option for InocuLAN will scan and cure attached files within Notes email
  and groupware databases.  Check our web site or call (800) 243 9462 
  for more information after August 1st.

  Note: These files update InocuLAN version 3.0 , signature file
  set 2.42 or later. These files cannot be used to update InocuLAN version 
  2.5 or 4.0. If your existing InocuLAN v3.0 signature is earlier than
  v2.42, first update to version 2.42 and then apply this update to 
  arrive at version 2.56.


S_Hinweise:
288i. Also contains a readme.txt, a changes.txt, and an updated AT Command listing. Please read the enclosed readme.txt for instructions on how to upgrade your modem with the ROM binary


S_Hinweise:
IncocuLAN for Windows NT
       Copyright 1996 by Cheyenne Division of Computer Associates

  Cheyenne Division                     TEL (516) 465-5000
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 465-3900
  USA                                   CompuServe:  GO CHEYENNE
                                        InocuLAN BBS: (516) 465-3930
                                        WEB SITE: WWW.CHEYENNE.COM
                                        Technical Support: (800) 243-9832
                                        Sales: (800) 243-9436

  ==========================================================================

  	This is a regular virus signature update for InocuLAN v1.x
  and InocuLAN v4.0 for Windows NT for the Intel, Alpha, MIPS, and
  Power PC platforms.  These files will update your system to 
  version 3.26


S_Bezeichnung:
Agent Software Download v7.1.3 (WIN) -US

S_Hinweise:
Agent Software Download version 7.1.3
-------------------------------------

*******************************************************
*  IMPORTANT! Make sure that the agent software that  *
*      you are about to download is compatible with   *
*      the version of MultiMan that you are running.  *
*      If you are not sure, please call  technical    *
*      support before attempting the download.        *
*******************************************************

1) Extract the agent software.

2) Copy the file to the following software directory ...
	Sun/OS:			/usr/mmov/software/
	MM 3.1.1 on Solaris:	/opt/mmov/software
	MM 4.0 on Solaris:	/opt/madge/micro
	Windows: C:\OV\ovcomm\agent_sw

   You might want to make a copy of the old agent software
[filename.old] in case you need to reload it if problems
arise.

3) Highlight the HUB you would like to update.

4) For Open platforms choose "Agent Software Download"
     from the Madge -> HUB Options sub-menu.
   For Solaris use the Madge sub-menu under Misc.  Then
     choose Timed Download Manager under Service Manager.
   For Windows choose "Download - Timed" from the Control
     menu (Control -> Madge -> Service Manager ->).


S_Hinweise:
InocuLAN Version 4.0
       Copyright 1996 by Cheyenne Division of Computer Associates
  Cheyenne Division                     TEL (516) 465-5000
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 465-3900
  USA                                   CompuServe:  GO CHEYENNE
                                        InocuLAN BBS: (516) 465-3930
                                        WEB SITE: WWW.CHEYENNE.COM
                                        Technical Support: (800) 243-9832
                                        Sales: (800) 243-9436
  =======================================================================

  InocuLAN v4.0 has been updated to incorporate new virus scanning
  signatures (v3.27) and performance improvements. 

  Note: These files update InocuLAN version 4.0, and cannot be used to
  update InocuLAN version 2.5 or 3.0.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 3.11
NetWare 3.12
NetWare SFT III 4.1
NetWare SFT III 3.11
NetWare 4.1
IntranetWare
NetWare 4.11

ABSTRACT:

This file contains the Modular versions of CLIB and DSAPI.  These versions are
for 4.10, NW 4.10 for OS/2, 4.10 SFT3 , 4.11 NW 4.11 for OS2, 4.11 SFT3 and
4.11 SMP only.  The modular CLIB/DSAPI found in the 4.x directory  have NOT
been tested on the NetWare 3.x platform.

 The files for NetWare 3.x servers are contained in the 3.x directory. The
files in the 3.x directory have not changed in this release from the previous
versions.  The last change to the 3.x CLIB files were LIBUP6.EXE.


S_Bezeichnung:
LAN Drivers and Support Modules f. ODI v3.20

S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 4.1
NetWare 3.12
NetWare SFT III 4.1
NetWare 3.11
NetWare SFT III 3.11

ABSTRACT:

    LANDR9 contains Novell LAN Drivers and Support Modules written to the v3.30
ODI Assembly Specification.  It also contains a set of Novell LAN Drivers and
Support Modules written to the v3.20 ODI Assembly Specification.


S_Hinweise:
IBM AntiVirus data file update version 2.5.2I

The data files in this update can be used to update IBM AntiVirus
version 2.5.2 so that it will detect (and sometimes, repair) viruses
found since version 2.5.2 was released.  If you are using IBM AntiVirus
2.4.1 or earlier, we strongly recommend upgrading to IBM AntiVirus 2.5.2
before applying this update, since the handling of the Concept virus and
other MS Word Macro viruses was dramatically improved in IBM AntiVirus
version 2.5, and was further improved in IBM AntiVirus 2.5.1 and
in IBM AntiVirus 2.5.2.

This update can be safely applied to systems to which previous updates
have been applied.  We do not recommend applying this update to versions
of IBM AntiVirus older than IBM AntiVirus version 2.5. (The update files
are compatible with earlier versions of IBM AntiVirus, back through IBM
AntiVirus 2.3, but the handling of MS Word Macro viruses is substantially
improved in IBM AntiVirus 2.5.)

C


S_Bezeichnung:
Update f. DS, DSREPAIR, DSMAINT, DSMERGE NLM´s

S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 4.1
NetWare SFT III 4.1

ABSTRACT:

This update contains DS.NLM v5.06, DSREPAIR.NLM v4.42, DSMAINT.NLM v4.96, and
DSMERGE.NLM v1.63.  These new files are for use with NetWare 4.10.  These new
files contain numerous enhancements and fixes over all previous versions of the
same files.  Novell strongly recommends that all NetWare 4.10 customers upgrade
their NDS files to these new versions.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 4.1
NetWare SFT III 4.1
SFT III 4.1

ABSTRACT:

41RTR4.EXE corrects IPXRTR problems on NetWare 4.10 and NetWare 4.10 SFT III.


S_Hinweise:
This is a Windows NT 3.51 NDIS 3.0 driver for Digi International's
 RightSwitch. The RightSwitch is a switched ethernet bridge 
 implemented on an ESIA or PCI bus card. The bridge provides four or six 
 external twisted-pair ethernet interfaces with a potential 
 through put of 40 or 60 megbits/second.

S_Intern:
DigiWARE Release Notes P/N 40001305c
			    for
   Digi RightSwitch EISA/PCI Windows NT NDIS 3.0 Driver V 1.2.0.0


S_Hinweise:
Please refere to NewWare SFT III 3.11 category


S_Hinweise:
288 German. Also contains a readme.txt, a changes.txt, and an updated AT Command listing. Please read the enclosed readme.txt for instructions on how to upgrade your modem with the ROM binary.


S_Hinweise:
These are archives that includes the ROM binary for your SupraFAXModem
               288i PnP. Also contains a readme.txt, a changes.txt, and an up


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
Novell Web Server 3.x

ABSTRACT:

This is an examples toolkit for the Novell Web Server 3.x.  THIS TOOLKIT IS NOT
SUPPORTED BY NOVELL.  IT IS SUPPLIED "AS IS".


S_Bezeichnung:
Update Comm. Center f. Mxx/Axx/Cxx (WIN 95) - US

S_Hinweise:
Use on:
=======
Aptiva Mxx/Axx/Cxx systems with Aptiva Communications Center and
Windows95.  System must also have latest MWave drivers installed.
(Mwave version 60AE7 or higher)
DO NOT use this upgrade on systems with Win3.x, or OS/2.  Also DO
NOT use this upgrade if the MWave drivers on your system are not
the most current.


S_Hinweise:
Digi Intelligent Board Driver
			       for
		       Microsoft Windows 3.1

			   Version 1.4.5

			  April 26, 1996


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NETDB IW 4.11
NetWare WEB Server 2.5
NetWare WEB Server 2.51
Novell Web Server 3.0

ABSTRACT:

Current release of Netdb.nlm version 3.25i.


S_Hinweise:
Executing this file will create a diskette containing the "RESTORE.EXE" program
                                               and supporting files. The RESTORE.EXE program allows you to restore
                                               corrupted or missing files or directories on your hard drive. This file is for systems
                                               with Windows95 preloaded ONLY. If you are using OS/2, consult your Users
                                               Guides for assistance.


S_Hinweise:
Executing this file will run a program which creates a bootable floppy. Booting the
                                               computer off of the bootable floppy will flash the bios, updating it to the most
                                               current level. This can solve conflicts with hardware and software that require
                                               information not in the original bios in order to interact with the system. This bios
                                               flash is for use with 2134 and 2176 C-model Aptivas.


S_Hinweise:
This file will create a diskette containing an update for your system. This update
                                               resolves occurrences of the following error message: "While initializing device IOS:
                                               Windows protection error. You need to restart your computer." This file should
                                               also be installed after a full recovery of your system software to prevent future
                                               errors.


S_Hinweise:
Universal OS/2 Device Driver for
Digi PCI Intelligent Communications Boards


S_Hinweise:
This file contains the updated V34 driver file for use on Aptiva MWave to
                                               improve 28.8 data connection reliability in Aptiva Mxx or Axx systems.


S_Bezeichnung:
Update Printing with HP and Ring Central - US

S_Hinweise:
Executing this file will create a diskette containing updated files to improve printing
                                               ability when using Hewlett-Packard printers and Ring Central.


S_Hinweise:
Executing this file will run a program which creates a bootable floppy. Booting the
                                               computer off of the bootable floppy will flash the bios, updating it to the most
                                               current level. This can solve conflicts with hardware and software that require
                                               information not in the original bios in order to interact with the system. This bios
                                               flash is for use with Aptiva S-Series 2159 models .


S_Hinweise:
DigiWARE Release Notes P/N 93000263A
                                     for
            Digi NetWare AIO MC Device Driver Combo Disk Version 1.0.0

                        Software Package    P/N 75000307A 
                        Diskette            P/N 40001730A
                        Software Manual     P/N 92000257A


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 3.12
NetWare MultiProtocol Router 3.1
NetWare 4.1

ABSTRACT:

MPR31B.EXE is an add-on patch for MPR 3.1.  It requires the MPR31A.EXE patch to
be installed.  Novell recommends that all owners of MultiProtocol Router 3.1 on
NetWare versions 4.1 and 3.12 install this patch.  If you have IntraNetWare or
NetWare 4.11, then install the 4.11 Support Pack 1 (411SP1.EXE) instead; do not
install this patch.


S_Hinweise:
DigiWARE Release Notes 93000240E
			            for
             Digi NetWare AIO Device Driver Combo Disk Version 1.0.4


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
GroupWise 4.1 for DOS
GroupWise 4.1 Admin for DOS
GroupWise 4.1 Admin for DOS
GroupWise 4.1 Admin for DOS
GroupWise 4.1 Admin for DOS
GroupWise 4.1 Admin for UNIX
OFCHECK - GW41

ABSTRACT:

Ofcheck 4.1c3 is fully compatible with 4.0a and later versions of GroupWise
databases and is recommended for use in place of previous versions of Ofcheck.

 This release includes enhanced checking routines for detecting and removing
orphaned message attachments.

 This enhancement will initially reduce the overall size of the message store
and will further assist system administrators in maintaining a clean and
efficient GroupWise system.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
SoftSolutions 4.1 for DOS
GroupWise 4.1 Admin Snap-in for NWADMIN
GroupWise 4.1 API Gateway for NLM
GroupWise 4.1 SMTP Gateway for NLM
GroupWise 4.1 Listserver for Windows
GroupWise 4.1 for DOS
SoftSolutions 4.0 for Windows
GroupWise 4.1 Message Server for NLM
GroupWise 4.1 X.25 Gateway for OS/2
GroupWise 4.1 X.400 Gateway for OS/2
GroupWise 4.1 Message Server for DOS
SoftSolutions 4.1 for Windows
GroupWise 4.1 Banyan IM Gateway for DOS
GroupWise 4.1 API Gateway for DOS
GroupWise 4.1 API Gateway for OS/2
GroupWise 4.1 Async Gateway for DOS
GroupWise 4.1 Async Gateway for OS/2
GroupWise 4.1 cc:Mail Gateway for DOS
GroupWise 4.1 Fax/Print Gateway for DOS
GroupWise 4.1 for Macintosh
GroupWise 4.1 Lotus Notes Gateway for OS/2
GroupWise 4.1 NGMHS Gateway for DOS
GroupWise 4.1 NGMHS Gateway for NLM
GroupWise 4.1 OfficeVision/VM Gateway for OS/2
GroupWise 4.1 Pager Gateway for OS/2
GroupWise 4.1 SMTP Gateway for DOS
GroupWise 4.1 SMTP Gateway for UNIX
GroupWise 4.1 SNADS Gateway for OS/2
InForms 1.0b for DOS
InForms 1.0b for Windows
SoftSolutions 3.0 for Windows
SoftSolutions 3.0 for DOS
GroupWise 4.1a for Windows
GroupWise 4.1 Admin for UNIX
GroupWise 4.1 ASYNC Gateway for NLM
GroupWise 4.1 X-Client for UNIX
Collabra Share 2.0 for GroupWise
GroupWise 4.1 Char-Client for UNIX
GroupWise 4.1 Admin for DOS
GroupWise 4.1 Office Vision/VM Gateway for NLM
GroupWise 4.1 X.400 Gateway for NLM
GroupWise 4.1 for UNIX
GroupWise 4.1 for Windows
GroupWise 4.1 Message Server for UNIX
GroupWise 4.1 Message Server for OS/2
GroupWise CollabraShare
InForms 4.1 for Windows

ABSTRACT:

The Novell Professional's Guide- was produced by the Novell GroupWare Support
SWAT Team.  It is a system planning and implementation methodology designed for
the integrator and administrator.

 This file contains an Envoy executable runtime file and requires Windows 3.1
or later.


S_Hinweise:
DigiWARE Release Notes
				     for
			  ISDN for Netware Systems

				P/N 93000205D


		  O/S Releases : Netware 3.11, 3.12, 4.1 and 4.11

pcimac.nlm  : v2.08    setup.nlm : v1.08   idp_xfs.bin : v1.26
iconfig.exe : v1.14    cnf.dll   : v1.10   ausidpx.bin : v1.26
adp.bin     : V1.09


S_Bezeichnung:
Madge adapter-resident Smart Protocols -US


S_Hinweise:
DigiWARE Release Notes
				      for
	       Digi ISDN NCM for IntranetWare / MPR 3.1 / NWC 2.0
				[Version 1.00]

				   12/16/96

		 O/S Releases : Netware 3.12, 4.10, IntranetWare

				 P/N 93001196a
			       Disk Set V 1.00

		      Diskette  -  P/N 40001544a (3.5")


    This release contains the following driver files :

	dgncmdrv.nlm : v1.00
	dgncmcfg.nlm : v1.00
	dgncmsts.nlm : v1.00
	adp.bin      : v1.0.8


S_Hinweise:
These are archives that includes the ROM binary for your SupraExpress 336i Sp.


S_Hinweise:
Windows flasher utilty for all 288 Supra modems


S_Bezeichnung:
Flash Utility Supra 288i PnP  (WIN95/NT4) -US

S_Hinweise:
This is a self-extracting archive that includes a Windows (3.x, 95 and NT 4.0)
               program to flash your SupraFAXModem 288i PnP. Also contains a readme.txt, a


S_Bezeichnung:
Flash Utility Supra 336i (WIN95/NT4) -US

S_Hinweise:
Flashable Products

     SUP1200/1    --    SupraFAXModem 288/336
     SUP1210/1    --    SupraFAXModem 288i/336i (internal)
     SUP1280/1    --    SupraFAXModem 288/336 (BZT/German approved)
     SUP1290/1    --    SupraFAXModem 288i/336i PnP
     SUP1330/1    --    SupraSonic 288/336 V+
     SUP1620      --    SupraExpress 336i Sp w/ASVD


S_Hinweise:
InocuLAN Version 4.0
       Copyright 1996 by Cheyenne Division of Computer Associates

  Cheyenne Division                     TEL (516) 484-5110
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 484-3445
  USA                                   CompuServe:  GO CHEYENNE
                                        InocuLAN BBS: (516) 465-3930
                                        WEB SITE: WWW.CHEYENNE.COM
                                        Technical Support: (800) 243-9832
                                        Sales: (800) 243-9436
============================================================================


 The AVUPDATE utility for InocuLAN v4.0 has been enhanced to support the
 following new features:
      1. Installation of the InocuLAN for NetWare workstation clients
      2. Both installation and update of the InocuLAN for Windows 95 clients.

 This file distribution contains the enhanced AVUPDATE releated files as well
 as documentation to support the new features. A revised GSETUP.EXE file is
 also provided that is compatible with the new utility.


S_Bezeichnung:
Virus signature v3.36 IL4.0 (DOS,WIN) - US

S_Hinweise:
InocuLAN Version 4.0
       Copyright 1996 by Cheyenne Division of Computer Associates
  Cheyenne Division                     TEL (516) 465-5000
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 465-3900
  USA                                   CompuServe:  GO CHEYENNE
					InocuLAN BBS: (516) 465-3930
					WEB SITE: WWW.CHEYENNE.COM
					Technical Support: (800) 243-9832
					Sales: (800) 243-9436
  =======================================================================

  InocuLAN v4.0 has been updated to incorporate new virus scanning
  signatures (v3.36) and performance improvements. 

  Note: These files update InocuLAN version 4.0, and cannot be used to
  update InocuLAN version 2.5 or 3.0.


S_Hinweise:
########################################################################
# (C) COPYRIGHT International Business Machines Corp. 1996, 1997       #
# All Rights Reserved                                                  #
# Licensed Materials - Property of IBM                                 #
#                                                                      #
# US Government Users Restricted Rights - Use, duplication or          #
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.    #
########################################################################

Willkommen beim IBM Internet Connection Secure Server Version 4 Release 2 für Windows NT!

Diese Informationsdatei enthält die aktuellsten Informationen zur Installation
und Verwendung des IBM Internet Connection Server. Diese Informationen
berichtigen und ergänzen die im Handbuch 'Einstieg in den Server' und im
'Webmaster Handbuch' enthaltenen Informationen.

Antworten auf häufig gestellte Fragen über den IBM Internet Connection
Secure Server können von der Web-Site der IBM Internet Connection-Familie
über den URL http://www.ics.raleigh.ibm.com abgerufen werden.


S_Hinweise:
########################################################################
# (C) COPYRIGHT International Business Machines Corp. 1996, 1997       #
# All Rights Reserved                                                  # 
# Licensed Materials - Property of IBM                                 #
#                                                                      #
# US Government Users Restricted Rights - Use, duplication or          #
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.    #
########################################################################

Welcome to the IBM Internet Connection Secure Server V4R2 for Windows NT.

This README file contains late-breaking information about installing
and using your IBM Internet Connection Secure Server.  This information
corrects and supplements the information in the IBM Internet Connection Secure
Server's Quick Beginnings book and Webmaster's Guide.

For answers to frequently asked questions about the Internet Connection
Secure Server, go to our Internet Connection Family Web Site at
http://www.ics.raleigh.ibm.com and read our FAQ.


S_Hinweise:
Der IBM Internet Connection Server Version 4 Release 2 fr OS/2 Warp kann jetzt
installiert werden.

Bevor mit der Installation begonnen wird, prfen Sie, ob das System die
folgenden Voraussetzungen erfllt:

o Wenn Sie eine Migration von einem vorherigen Release durchfhren
  oder die US-kanadische Version des IBM Internet Connection Secure
  Server fr OS/2 Version 4 Release 2 erneut installieren mchten,
  mssen Sie zuerst die aktuelle Version des Servers mit dem aktuellen
  Installationsdienstprogramm des Servers lschen. Detaillierte Anweisungen
  knnen Sie dem Handbuch 'Einstieg in den Server' zum IBM Internet Connection
  Secure Server entnehmen.

o Der Server MUSS auf einem HPFS-formatierten Laufwerk installiert werden,
  nicht auf einem FAT-formatierten Laufwerk.

o OS/2 Warp ab Version 3.0 oder OS/2 Warp Server oder OS/2 Warp Server
  muá vorhanden sein


S_Hinweise:
DigiWARE Release Notes 93000130R
                                      for
                       Digi X* + C/X + Xem + Xr + EPC/X
                         Windows NT 3.51 & 4.x Driver
                      for Intel, Alpha, PowerPC and MIPS
                                     v2.1.0


S_Hinweise:
Version: 3.00
                                                       Posted: 10/29/96

               Driver Info:
               This release driver set version 3.00 offers the following


S_Hinweise:
InocuLAN NLMs for Version 4.0
       Copyright 1996 by Cheyenne Division of Computer Associates
  Cheyenne Division                    TEL (516) 465-5000
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 465-3900
  USA                                   CompuServe:  GO CHEYENNE
					InocuLAN BBS: (516) 465-3930
					WEB SITE: WWW.CHEYENNE.COM
					Technical Support: (800) 243-9832
					Sales: (800) 243-9436
  =======================================================================

  InocuLAN NLM's for v4.0 have been updated to incorporate new virus
  scanning signatures (v3.34) and performance improvements. 

  This distribution of files can be used to update InocuLAN v4.0 servers
  to the current signature baseline.


S_Hinweise:
Installing and Setting the IBM Token-Ring 16/4 Busmaster Server Adapter/A

The IBM Token-Ring 16/4 Busmaster Server Adapter/A is functionally different
from the IBM Token-Ring 16/4 Adapter/A in two ways:

þ    Busmaster capability

Busmastering allows the IBM Token-Ring Network 16/4 Busmaster Server Adapter/A
to transfer between the network and the server's memory without the aid of the
server's CPU.  The server's CPU can then process other network tasks more
quickly than it otherwise could.

þ    Downloadable microcode

Downloading microcode allows you to upgrade the IBM Token-Ring Network 16/4
Busmaster Server Adapter/A's firmware without replacing any chips on the
adapter.  FIRMLOAD.COM (supplied by Novell) allows you to download the
firmware (supplied by IBM) to the adapter.

S_Intern:
LAN patches for Novell file servers 3.11 and above


S_Hinweise:
InocuLAN NLMs for Version 4.0
       Copyright 1996 by Cheyenne Division of Computer Associates
  Cheyenne Division                    TEL (516) 465-5000
  3 Expressway Plaza                    FAX (516) 484-3446
  Roslyn Heights, NY 11577              BBS (516) 465-3900
  USA                                   CompuServe:  GO CHEYENNE
					InocuLAN BBS: (516) 465-3930
					WEB SITE: WWW.CHEYENNE.COM
					Technical Support: (800) 243-9832
					Sales: (800) 243-9436
  =======================================================================

  InocuLAN NLM's for v4.0 have been updated. 

  	                                                     
  A. Instructions for updating servers with these files:
  ======================================================================
     
  1. Copy all file(s) provided with the extension .NLM to the SYSTEM 
     directory on the server.

  2. Unload and reload InocuLAN at the server console.        
       
  3. Repeat steps 1-3 for each InocuLAN server.

  Files:
  INOCUCMD.NLM
  RTSCAN.NLM


S_Hinweise:
Version: 4.00
                                                       Posted: 1/21/97

               The following are Windows NT 4.0 drivers for the NetCommander ISDN. View
               this driver's README before downloading. Review the NetCo


S_Hinweise:
ARCserve Image Option for Windows NT 
Version 1.0


S_Hinweise:
This file is downloaded from Boca's website.  It fixes the "no dial"  problem with the MV.34AI "Home Fax Modem."  Replace the old attmodem.vxd in  your Windows/System directory with this file.

S_Intern:
This file is downloaded from Boca's website.  It fixes the "no dial"  problem with the MV.34AI "Home Fax Modem."  Replace the old attmodem.vxd in  your Windows/System directory with this file.


S_Hinweise:
LANDR9.EXE Installation Instructions on 4.10 versions of NetWare using INSTALL.NLM.
===========================================================================

Section  1     Installing ODI Drivers on a Native NetWare Server.
Section  2     Installing ODI Drivers on a NetWare SFT III Server.
___________________________________________________________________________


     Novell has provided an installation script to be used with INSTALL.NLM 
     "Product Options".  However, it is still possible to manually copy the 
     ODI drivers to the file server.

     This script file can be run in serveral ways:
		1- From local A: Drive at Server.
		2- From local Drive at Client useing Rconsole (F4).
		3- From local SYS: volume (F3), by specifying the path including 
		  volume name..ie SYS:\LANDRx.
		4- From a diffrent server on the network (F3) by specifying
		  full path including server name..ie Server_Name\SYS:\LANDRx.

		NOTE: Fastest installation in order of performance is: 
			option 3, option 4, option 2, option 1.

S_Intern:
LAN Patches conforming to ODI spec v3.2 & v3.3


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
GroupWise 4.1 Admin Snap-in for NWADMIN
GroupWise 4.1 for DOS
GroupWise 4.1 Message Server for NLM
GroupWise 4.1 Message Server for UNIX
GroupWise 4.1 Message Server for DOS
GroupWise 4.1 Message Server for OS/2
GroupWise 4.1 for Macintosh
GroupWise CollabraShare
GroupWise 4.1a for Windows
GroupWise 4.1 Admin for UNIX
GroupWise 4.1 Admin for DOS
GroupWise 4.1 for UNIX
GroupWise 4.1 for Windows

ABSTRACT:

The GroupWise Administration document is part of the Novell Professional's
Guide- which was produced by the Novell GroupWare Support SWAT Team.  This
document provides an overview of the major issues to keep in mind when planning
administrative tasks and schedules. Administration of your GroupWise system can
be broken down into a few general tasks:
 File Created:  11/21/96.


S_Hinweise:
ARCserve for Windows NT Image Option  Release Notes


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
GroupWise 4.1 Admin Snap-in for NWADMIN
GroupWise 4.1 for DOS
GroupWise 4.1 Message Server for DOS
GroupWise 4.1 for Macintosh
GroupWise 4.1 API Gateway for DOS
GroupWise 4.1a for Windows
GroupWise 4.1 Admin for UNIX
GroupWise 4.1 Admin for DOS
GroupWise 4.1 for UNIX
GroupWise 4.1 for Windows
GroupWise 4.1 Message Server for NLM
GroupWise 4.1 Message Server for OS/2
GroupWise 4.1 Message Server for UNIX
GroupWise CollabraShare

ABSTRACT:

The GroupWiseApplication Threshold document is part of the Novell
Professional's Guide- which was produced by the Novell GroupWare Support SWAT
Team.   The application threshold is a number set by the GroupWise
administrator to divide up message delivery work between the GroupWise client
applications and server applications. GroupWise users read messages in client
applications available for DOS, Windows, Macintosh and UNIX.


S_Hinweise:
Release Notes (A) 93000250A
                           for
                  DataFire PCI Adapter
                       Driver for
                       Windows NT
                    v3.0.0 Release A
                        12/10/96


S_Hinweise:
Version 2.61

Digital EtherWORKS TURBO PCI 10 and Digital EtherWORKS TURBO PCI 10 TP


S_Hinweise:
NE2000 Install utilities (Plusdiag, Ping, etc...)

S_Intern:
NE2000 Install utilities (Plusdiag, Ping, etc...)


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
GroupWise 4.1a for Windows

ABSTRACT:

This is the engine for GroupWise 4.1a which shipped with the international
releases of Patch 3 but became available too late for the US Patch 3.  It fixes
a problem where a BC email recipient would do a "reply-to-all" and get a GPF. 
Technical information document (TID) #2924714 explains the naming convention of
this file.


S_Bezeichnung:
Patch 3 for GroupWise 4.1a for Windows (SU)

S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
GroupWise 4.1a for Windows

ABSTRACT:

This is PATCH 3 and is intended for the GroupWise 4.1a Windows Client.  It
should be used to Patch the Refresh (Multilingual) CD which is Version 19 or
the Beta Version 24.   It will not patch the EVAL CD if you have that version.   
Refer to TID # 2923191 for an explanation of the Patch naming convention used
for this Patch.


S_Hinweise:
README.1ST                                            April, 1996

Installation
------------
The files on this disk are in compressed form. To use one or more
of the included drivers, you must run Install. The Install program 
will decompress the drivers you have selected to your hard disk.
Note: Full driver extraction requires approximately 2 Megabytes of
disk space. NetWare or Diagnostics file extraction will use about
200K of disk space. Please make sure that the disk space is available
before starting the Install program.

For further information on hardware or software installation, please 
refer to Manual.txt on this disk and the included Quick Installation 
Guide. An overview of PCMCIA architecture and services can also be
found in both documents. Manual.txt includes information relating to 
DCD16, for computers that do not have Card Services or Socket Services.

S_Intern:
NE4200 Install, NDIS, OS/2 & Novell cl/srvr


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
GroupWise 4.1a for Windows

ABSTRACT:

This is Patch 3 for GroupWise 4.1a remote Windows client (US English)
installations.  NOTE:  This file (gwusr3.exe) has not been changed since its
initial release.  The change in release date reflects a change in the readme
wording only.


S_Hinweise:
Device=JetDirect Print Server
Models=J2591A
Version=E.05.12
The Ethernet firmware revision E.05.12 includes 
enhancements and fixes for the following bugs in 
previous code revisions.  This image is only valid 
for J2591A.


S_Hinweise:
Release Notes for NE4200CE, Software Release 2.01

Included on this disk is the Windows 95 certified NDIS3 driver. This
disk is new to the product, to simplfy the Windows operating system
installation procedures. The drivers can also be installed via the
original method from the disk labeled "NE4200 Driver Disk".

S_Intern:
NE4200 Windows 3.x, NT & 95 install directories


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
Admin GW50

ABSTRACT:

This file contains an update to the US English GroupWise 5 Troubleshooting Help
for NWAdmin


S_Bezeichnung:
GroupWise 5 German Administration Help Files

S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
GroupWise 5
Admin GW50

ABSTRACT:

This self-extracting file contains updated administration help files for the
German version of Novell GroupWise 5.


S_Hinweise:
³		 ACCTON TECHNOLOGY CORPORATION			³
³   EN1203, EN1207(-TX) Series PCI-BUS (FAST) ETHERNET ADAPTER	³
³								³
³	Copyright 1995-1997 ACCTON Technology Corporation	³
³		      All rights reserved.			³


S_Hinweise:
Version 2.7a
 
Digital Fast EtherWORKS PCI 10/100 Adapter (DE500-XA, DE500-AA, and DE500-BA)


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
Client for Win 16 - GW51B
Client for Win 32 - GW51B
Client GW50

ABSTRACT:

This contains the updated help file for GroupWise 5.x  for Windows (16-bit)
Client.  Technical Information Document #2924545 explains the naming convention
used for this file.


S_Hinweise:
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³                                                                    ³
³  MODULE NAME      MA58DEDE                                         ³
³                                                                    ³
³  DESCRIPTIVE NAME MQSeries Client for Windows NT (German)          ³
³                                                                    ³
³  Statement:       Licensed Materials - Property of IBM             ³
³                                                                    ³
³                   MA58 SupportPac                                  ³
³                   (c) Copyright IBM Corp. 1996                     ³
³                                                                    ³
³                   All rights reserved.                             ³
³                                                                    ³
³                   U.S. Government Users Restricted Rights - use,   ³
³                   duplication or disclosure restricted by GSA      ³
³                   ADP Schedule Contract with IBM Corp.             ³
³                                                                    ³
³  Status:          Version 2.0.1 (CSD U200058)                      ³
³  Last Modified:   19 November 1996                                 ³
³                                                                    ³
³         06 Aug 96   - Inclusion of RUNMQTMC.EXE                    ³
³                     - Inclusion of STRMQTRC.EXE                    ³
³                     - Inclusion of ENDMQTRC.EXE                    ³
³                     - Inclusion of AMQZTRCN.EXE (trace mechanism)  ³
³                     - Inclusion of MQICCBB.DLL (cobol bindings)    ³
³         01 Oct 96   - New URL path                                 ³
³         19 Nov 96   - Addition of U200058 to package               ³
³                                                                    ³
³   NOTES :-                                                         ³
³     DEPENDENCIES = Windows NT V3.50 and later                      ³
³     RESTRICTIONS = None                                            ³
³     MODULE TYPE  = InfoZip compressed                              ³
³                                                                    ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ


S_Bezeichnung:
Patch HP J22569J ASA vJ.01.00 (WIN95/NT) -US

S_Hinweise:
This self-extracting file [ASAJ10_A.exe] contains a patch for the product:
 HP J2569J AdvanceStack Assistant (ASA) for Microsoft Windows 95 and NT
 Version: J.01.00


S_Hinweise:
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³                                                                    ³
³  MODULE NAME      MA58ENUS                                         ³
³                                                                    ³
³  DESCRIPTIVE NAME MQSeries Client for Windows NT (English)         ³
³                                                                    ³
³  Statement:       Licensed Materials - Property of IBM             ³
³                                                                    ³
³                   MA58 SupportPac                                  ³
³                   (c) Copyright IBM Corp. 1996                     ³
³                                                                    ³
³                   All rights reserved.                             ³
³                                                                    ³
³                   U.S. Government Users Restricted Rights - use,   ³
³                   duplication or disclosure restricted by GSA      ³
³                   ADP Schedule Contract with IBM Corp.             ³
³                                                                    ³
³  Status:          Version 2.0.1 (CSD U200058)                      ³
³  Last Modified:   19 November 1996                                 ³
³                                                                    ³
³         06 Aug 96   - Inclusion of RUNMQTMC.EXE                    ³
³                     - Inclusion of STRMQTRC.EXE                    ³
³                     - Inclusion of ENDMQTRC.EXE                    ³
³                     - Inclusion of AMQZTRCN.EXE (trace mechanism)  ³
³                     - Inclusion of MQICCBB.DLL (cobol bindings)    ³
³         01 Oct 96   - New URL path                                 ³
³         19 Nov 96   - Addition of U200058 to package               ³
³                                                                    ³
³   NOTES :-                                                         ³
³     DEPENDENCIES = Windows NT V3.50 and later                      ³
³     RESTRICTIONS = None                                            ³
³     MODULE TYPE  = InfoZip compressed                              ³
³                                                                    ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
                                                                                                                                    
Inst


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
IntranetWare for Small Business

ABSTRACT:

In IntranetWare for Small Business (IWSB), a customer will be unable to BIND
IPX to multiple LAN cards.  It will prevent binding IPX to both a physical LAN
card and NetWare Connect's PPPRNS service.

 NOTE: With the first release of  LSLCRIPP.NLM a problem specific to TCPIP, had
been identified. When IP is bound, no error messages are returned, but IP does
not function.  It did not effect IPX, multiple IPX protocols could be bound.


S_Hinweise:
J2414A HP ADVANCESTACK 100VG SNMP/BRIDGE MODULE FIRMWARE UPDATE, VERSION A.01.05


S_Hinweise:
This archive of the Support Disk for the HP J2405A adapter contains
 drivers for three networking environments:
 
    Novell NetWare Client 32    in directory NOVELL\CLIENT32
    Microsoft Windows 95        in directory WIN95
    Microsoft Windows NT 4.0    in directory WINNT


S_Hinweise:
@echo off
:begin
if exist %1\general\readme.bat goto top
@echo.      
@echo If your current drive does not contain the NE10/100 ISA Configuration
@echo and Driver diskette, either:
@echo    (1) make that diskette your current drive by entering A: or B:
@echo or
@echo    (2) type README drive:\path (excluding GENERAL)
@echo so that the README files can be read from the correct disk.
pause
goto fini

:top
cls
@echo.
@echo.
@echo     ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
@echo     ³                                                                ³
@echo     ³              Microdyne NE10/100 ISA Adapter                    ³
@echo     ³                        Information                             ³
@echo     ³                                                                ³
@echo     ³  New Features, Release Notes                      press 1      ³
@echo     ³  General Introduction                             press 2      ³
@echo     ³  NetWare Clients (DOS, OS/2, NT, 95)              press 3      ³
@echo     ³  NetWare Server                                   press 4      ³
@echo     ³  Windows (WfW, NT, 95) and MS Network Client      press 5      ³
@echo     ³  Lan Manager                                      press 6      ³
@echo     ³  Lan Server                                       press 7      ³
@echo     ³  Packet Driver                                    press 8      ³
@echo     ³  SCO UNIX                                         press 9      ³
@echo     ³  Keywords                                         press 0      ³
@echo     ³  To Exit                                          press Esc    ³
@echo     ³                                                                ³
@echo     ³                                                                ³
@echo     ³                                                                ³
@echo     ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ


S_Hinweise:
@echo off
if exist %1readme.bat goto :top
@echo.
@echo If your current drive does not contain the NE10/100 ISA Configuration
@echo and Driver diskette, either:
@echo    (1) make that diskette your current drive by entering A: or B:
@echo or
@echo    (2) type README drive:
@echo so that the README files can be read from the correct diskette.
@echo.
goto :fini

:top
cls
@echo.
@echo.
@echo     ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
@echo     ³                                                                ³
@echo     ³           Microdyne NE10/100 ISA Ethernet Adapter              ³
@echo     ³                        README files                            ³
@echo     ³                                                                ³
@echo     ³  To read the General Introduction README file,    press 1      ³
@echo     ³  To read the NetWare DOS Client README file,      press 2      ³
@echo     ³  To read the NetWare Server driver README file,   press 3      ³
@echo     ³  To read the NDIS README files (e.g.,Win95, NT,)  press 4      ³
@echo     ³  To read the Packet Driver README file,           press 5      ³
@echo     ³  To read the SCO UNIX README file,                press 6      ³
@echo     ³  To exit the README files,                        press 0      ³
@echo     ³                                                                ³
@echo     ³                                                                ³
@echo     ³  When you see "-- More --" at the bottom of each screen,       ³
@echo     ³  press the [SPACEBAR] to view the next screen.                 ³
@echo     ³                                                                ³
@echo     ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ


S_Hinweise:
This README file is an explanation of the files contained in the root 
directory of this diskette and their usage. More information can be obtained
about most of these files in the "NetWare Workstation for DOS" manual.

                ---------------------------------

AUTOEXEC.BAT:

This is an example of a file that will load your driver and the
other files necessary to bring up your workstation.  It should be
on your workstation boot diskette or hard disk along with the LAN
driver for your adapter, NETX, and any other files you wish to load
when booting.  This AUTOEXEC file should work fine for most
situations, but you can modify it as necessary.


S_Hinweise:
Program Name
------------
MQSeries for OS/2 link extra for Lotus Notes

Specified Operating Environment
-------------------------------
The Program Specifications and Specified Operating Environment
information may be found in the Installation/Users Guide provided with
this program.

Additional Terms and Conditions
-------------------------------
  Authorization for Copy and Use on Home/Portable Computer
  --------------------------------------------------------
  Yes; under the terms stated in the IPLA.

  Transfer of Program
  -------------------
  Program is fully transferable.

  Proof of Entitlement
  --------------------
  The Proof of Entitlement for this program should be retained in
  order to support eligibility provided by IBM or its authorized
  reseller for warranty services, future upgrade program prices (if
  announced), potential special or promotional opportunities (if any),
  and as evidence of the end user's authorized use of this IBM
  licensed program.

  Program Services
  ----------------

    Availability/Duration of Program Services
    -----------------------------------------
    Program services will be available until

    1997/02/28 MQSeries for OS/2 link extra for Lotus Notes

  Statement of Service
  --------------------
  IBM provides defect support through Program Services.  A defect
  related problem means the program does not conform to specifications
  and could be either a code or documentation error.

  For information on how you may access Program Services, or other
  fee-based support services, please contact IBM or its reseller from
  whom you acquired this program.


S_Hinweise:
------------
MQSeries for OS/2 link extra for Lotus Notes

Specified Operating Environment
-------------------------------
The Program Specifications and Specified Operating Environment
information may be found in the Installation/Users Guide provided with
this program.

Additional Terms and Conditions
-------------------------------
  Authorization for Copy and Use on Home/Portable Computer
  --------------------------------------------------------
  Yes; under the terms stated in the IPLA.

  Transfer of Program
  -------------------
  Program is fully transferable.

  Proof of Entitlement
  --------------------
  The Proof of Entitlement for this program should be retained in
  order to support eligibility provided by IBM or its authorized
  reseller for warranty services, future upgrade program prices (if
  announced), potential special or promotional opportunities (if any),
  and as evidence of the end user's authorized use of this IBM
  licensed program.


S_Hinweise:
Using the EXOS105 NDIS DRIVER

 If a hardware configuration change from the factory set defaults is
 necessary, you may be required to modify the PROTOCOL.INI file manually
 after the software installation.

 Any configurations which use more than one EXOS 105 Ethernet Controller
 and/or more than one protocol via NDIS may require manual modifications
 to the PROTOCOL.INI file (refer to the example below).

   Directory contents:

      EXOS105.EXE      EXOS105 Ethernet adapter NDIS driver.
      PROTMAN.SYS      The Protocol Manager DOS device driver.      
      NETBIND.EXE      Protocol/Mac bind utility.
      PROTOCOL.INI     INIT file configured for the EXOS105 only.

   Installation:

      Copy the EXOS105.EXE file to an appropriate directory where
      you keep other network software.

      If you do not already have the driver PROTMAN.SYS copy this
      file to your network directory.

      Copy the NETBIND.EXE utility to an appropriate directory where
      you keep other network utilities. The directory you select
      must be in the DOS path or you must make this directory the
      current directory to execute the utility.


S_Hinweise:
WNIM2000 AIO Driver V2.00 Information


                                May 1995


                          Microdyne Corporation
                         3601  Eisenhower Avenue
                        Alexandria,  Virginia 22304
                                 U.S.A.


              TEL: (800) 255-3967      FAX: (703) 329-3722
              TEL: (703) 329-3700      BBS: (703) 960-8509


                    Copyright 1995 Microdyne Corporation.
                           All rights reserved.



INTRODUCTION

The AIOWNIM2.NLM V2.00 is the AIO Driver for Microdyne's WNIM2000
and WNIM4400 AIO adapters. The WNIM4400 is integrated in Microdyne's 
ACS4400 Asychronous Access Server. This document contains the necessary 
information to load the WNIM2000/WNIM4400 AIO Driver and lists 
status/error messages that may display while loading and unloading the 
AIO Driver.


S_Hinweise:
MA31: A REXX Interface to MQSeries for OS/2



Description

This SupportPac provides a Rexx Interface for IBM MQSeries Version 2.0 on OS/2. It permits the usage of MQ function within a Rexx Exec,
and can be used as a prototyping tool in the OS/2 environment. 

Two DLLs are provided. One DLL supports access to a Local Queue Manager, whilst the other DLL provides access to a Server Queue
Manager via MQSeries Clients. 

Source is included for both DLLs to allow for local modification and customisation. 

A sample REXX Exec which demonstrates usage of the interface is also supplied.


S_Hinweise:
This disk is provided user to update en2212 CIS
in flash. After update cis , this card can support Windows NT4.0.
Drivers is same as Windows nt3.51. For your convenient, I put
NT dirvers in this disk.
	       Please verify your machine can program flash first.
NOTE:
The restriction is as follow:
	1.notebook  use INTEL82365 PCIC controller.

usage: update.exe
after cis programming is finished. You can run checkcis.exe to check
the accis.bin is equal to  cis in flash or not.

We have test this program in the following machine.
1.NEC versa P/75.
2.Conpaq Concerto.
3.IBM Thinkpad 750.
4.Acer Note 950.
5.Twin head Slimnote-8100TX.
6.AcerNote light.
7.HP OMINBOOK 4000ct.
8.NEC versa 486SX/25.

if you still have trouble to program flast . please contact accton corp.

best regards


S_Hinweise:
MA32: MQSeries for OS/2 Utilities



Description

This SupportPac describes a set of utilities that may be helpful when using MQSeries for OS/2 Version 2.0. The utilities will load a file from a
Queue (and the other way around), and also provide a way of manipulating the Attributes of a Queue. The source code is provided, and so these
programs may be used by an installation to provide a basis for their own programs. 

Possible Uses

This SupportPac is designed for people who: 

     Want to explore Message Queuing within the OS/2 environment 
     Will be writing utilities for MQSeries for OS/2 
     Need knowledge of Message Queueing operations in order to provide Technical Support 
     Are interested in the Design of Message Queuing Applications


S_Hinweise:
Gateway's NDIS Driver

To use Gateway's adapter with the NDIS driver, you must modify the CONFIG.SYS
and PROTOCOL.INI files on your system.

The CONFIG.SYS file should be modified to have a statement such as: 

        Device=c:\path\GQNCNDS.DOS  (for DOS-based workstations) or
        Device=c:\path\GQNCNDS.OS2  (for OS/2-based workstations)

Copy the driver into the appropriate subdirectory specified by the path in
CONFIG.SYS.

Select the appropriate NDIS driver for your card:
        National Chipset cards - GETHER.DOS
        Fujitsu Chipset cards - GQNCNDS.DOS
        EISA Busmaster (32EB) - GEEBNDS.DOS
        (replace the ".DOS" with ".OS2" for OS/2 workstations

The PROTOCOL.INI file is usually provided in the network software or is
generated during network installation.  The file consists of three or more
sections, and each section has a header which is enclosed in brackets.
The first section is the Protocol Manager section, followed by one or more
Protocol sections and one or more Hardware sections.  You must add a Hardware
section for the Gateway adapter and change the "bindings" statement in the
appropriate Protocol section to point to the Hardware section for Gateway
adapters.  The Hardware section for a Gateway adapter at default settings
looks like this:


S_Hinweise:
This disk is provided user to update EN2218 CIS
in EEPROM. After update cis , this card can support Windows NT4.0.
, Windows NT3.51(chinese version) and windows 95 release SR2 .


S_Hinweise:
Novell NetWare 3.12, ODI 3.3 Driver Version 1.00

NetWare ODI Server Driver for the
DIGITAL ATMworks 351 PCI ATM Adapter


S_Hinweise:
MA71: MQSeries for Windows NT - MQSeries link extra for Lotus Notes



Description

This Supportpac contains the MQSeries for Microsoft Windows NT link extra for Lotus Notes software developers kit. 

MQSeries link extra provides MQSeries applications with a means of sending data to a Lotus Notes environment. This data can be used to
update or add one or more documents to a Lotus Notes database. Document updates may span more than one database. The user specifies
what action to take using a combination of key fields and rules. An exit is provided for special error handling, which the user can change. 

This SDK requires MQSeries for Microsoft Windows NT running in the Lotus Notes environment. The message data can originate from any
platform which MQSeries supports.


S_Hinweise:
Switch settings for the Convertable & Hardtop adapters

S_Intern:
Switch settings for the Convertable & Hardtop adapters


S_Hinweise:
Dated 12/22/95:

This readme file covers issues for the Microdyne IrmaTrac PCI 4/16 
Token Ring Adapter users. This file will be updated as the issues 
are resolved. The intent here is to provide the user up-front 
information to prevent installation problems.

Using Novell Netware Server 4.10:
--------------------------------
The Microdyne server driver, TR2K386.LAN, is tested extensively in 
various PCI systems in Netware 3.12, Netware 4.01 and 4.10 server 
environments. Single and dual adapters in the PC server work in all 
environments. However, there is a compatibility problem with server 
driver (TR2K386.LAN) in the IBM PC Server model 8640 when running 
Netware 4.10 with dual adapters. In the Netware 4.01 environment 
the driver works with 2 IrmaTrac adapters installed to create 
2 token ring network. The IBM PC Server fails, in the Netware 4.10 
environment with two IrmaTrac adapters and any EISA based SCSI 
controller, after a few hours of operation. 

Possible work around:  For the IBM PC Server  use the on board IDE 
hard disk controller with 2 IrmaTrac adapters. The driver works but 
at lower performance.


Using dual IrmaTrac Adapters:
----------------------------
Dual adapters are supported only in the Novell DOS  server and client 
environments. At this time dual adapters are not supported in the 
Microsoft and IBM network environments.

S_Intern:
IrmaTracPCI NDIS, Win(3.x 95) & LAN support Drivers


S_Hinweise:
MA77: A REXX Interface to MQSeries for Windows NT



Description

This SupportPac provides a Rexx Interface for MQSeries for Windows NT Version 2.0. It permits the usage of MQSeries function within an
Object Rexx Exec and can be used as a prototyping tool in the Windows NT environment. 

Two DLLs are provided. One DLL supports access to a Local Queue Manager, whilst the other DLL provides access to a Server Queue
Manager via MQSeries Clients. 

Source is included for both DLLs to allow for local modification and customisation. 

A sample REXX Exec which demonstrates usage of the interface is also supplied.


S_Hinweise:
Novell NetWare 4.1x, ODI 3.3 Driver Version 1.00

NetWare ODI Server Driver for the
DIGITAL ATMworks 351 PCI ATM Adapter


S_Bezeichnung:
C++ Interface f. MQI v1.6 (WIN95/NT x) - US

S_Hinweise:
MA79: MQSeries C++ for Windows 95 and NT



Description

This SupportPac provides C++ classes that encapsulate the MQI, for use with MQSeries for Windows NT Version 2.0, MQSeries Client for
Windows 95 and MQSeries for Windows 2.1 (Beta). It also works in conjunction with SupportPac MA74 ( MQSeries for Windows NT -
Queue Manager/Client Presence Autodetect). 

C++ support for MQSeries for Windows V2.0 is provided in SupportPac MA73 whilst support for MQSeries Client for Windows 3.1 is
provided in SupportPac MA59. 

MQSeries C++ Version 1.6 Read Me
---------------------------------

This is the C++ programming interface for the
MQSeries Message Queue Interface (MQI).

These are the changes for Version 1.6:


S_Hinweise:
100 Mb/s MSL Adapter
                  Software Distribution Diskette


  This diskette contains programs and data files which are required
  for the operation of the MSL network adapters.

  The diskette contains subdirectories which contain computer configuration
  files, network adapter diagnostic programs and Novell MSL drivers.

DIRECTORY CONTENTS
------------------

  Root Directory Contents

    1.  READ.ME - This file.
    2.  !PTS002A.CFG - EISA configuration files for the EISA MSL
        adapter cards.
                                                                    
  \NEW Directory Contents

    1. The latest MSL driver for EISA Fiber and PCI Fiber. The PCI 
       support is new. This driver is currently undergoing certification
       It's use is recommended.
   	 
  \CERTIFIED Directory Contents

    These are the currently Novell certified drivers.

    1.  3.11\WBMSL.MSL - Certified version of the EISA Novell 3.11 MSL File

S_Intern:
Drivers for the NMSL+ fiber adapters. v1.6


S_Hinweise:
Accton Technology Corporation
        EN1657/58-P Software Driver Support
             V1.01     02/28/1997
        ==============================

 Copyright (c) 1994-1997 by Accton Technology Corporation.
 All rights reserved.

 Welcome to Accton's growing family of users and thank
 you for purchasing one of our many networking products.

 The most important thing for Accton's EN1657/58-P adapter is that:
 ======================================================================
 ** To use EN1657/58-P adapter on Non-PnP machine, please run  setup program
 and set the adapter to jumpless mode, otherwise driver can't recognize
 the adapter.


S_Hinweise:
Microdyne Corporation                       NTR 2000  Token Ring Adapter   
							Readme.txt
=======================================================================
IMPORTANT:

	If you are using the default interrupt option (IRQ 2) in a
NetWare v3.11 server the following steps must be followed before
executing SERVER.EXE.


   Step 1:   Copy the XLOAD.EXE and LDR001.PTF from the 386ODI directory
		 to the same directory where SERVER.EXE is located.  (The 
		 server boot directory)

   Step 2:   At the DOS prompt, in the server boot directory, type the
		 following:  XLOAD LDR001.PTF

The above steps will modify the SERVER.EXE to allow the use of the IRQ 2
interrupt option.  The above steps will only need to be performed once.

-------------------------------------------------------------------------

I. NetWare Server Driver

This diskette includes a NetWare Server Driver (NTR2000.LAN) that  
requires certain NLMs to be loaded (order sensitive).  The required 
NLMs are:

				 PATCHMAN.NLM
				 LSLENH.NLM
				 MSM.NLM
				 MSM31X.NLM
				 TOKENTSM.NLM
				 NTR2000.LAN

S_Intern:
NTR2000 install disk - Novell client/server drivers


S_Hinweise:
Windows NT Intel Driver Version 1.01

Windows NT Driver for the 
DIGITAL ATMworks 351 PCI ATM Adapter


S_Hinweise:
Modem-Emulation für Creatix ISDN und WIN 95. Es wird jetzt auch T-Online unterstützt. Diese Modem-Emulation ist aktueller als die Modem-Emulation von Creatix ISDN 97.


S_Hinweise:
WAN Links
for Windows NT

Version 2.0.0
 Copyright 1996-1997 Digi International, Inc.

This document describes the installation, configuration and features of the Digi WAN Links package.  This package includes support for both X.25 and Frame Relay for Windows NT versions 3.51 and 4.0.


S_Hinweise:
NW2000 Frame Relay Drivers and Wandiag.exe

S_Intern:
NW2000 Frame Relay Drivers and Wandiag.exe


S_Hinweise:
Accton Technology Corporation
        EN166x Software Driver Support
             V1.06     01/07/1997
        ==============================

 Copyright (c) 1996, 1997 by Accton Technology Corporation.
 All rights reserved.

 Welcome to Accton's growing family of users and thank
 you for purchasing one of our many networking products.

 The most important thing for Accton's EN166x adapter is that:
 ======================================================================
 ** To use EN166x adapter on Non-PnP machine, please run  1Step program
 and set the adapter to jumpless mode, otherwise driver can't recognize
 the adapter.

 ** 1Step Ver1.01 or later can not be used with UNC diskette Ver 1.1, it
    must use together with UNC diskette Ver1.21 or later.

 ** AccView Station program are moved to MPX WORK diskette, this disk
 are included in 5 adapters package(EN166x-005), if user want to use
 this program, he can copy it from Accton's distributor or download from
 Accton's BBS directly.(See \Support directory for BBS information)
 =======================================================================


S_Hinweise:
The Open Data-Link Interface (ODI) Overview

A discussion on why Novell is promoting the transition to the 
ODI specification:

A comparision between Novell's Dedicated IPX and ODI, 
an ODI architectural overview, and 
a comparison between ODI and Microsoft's NDIS.

Prepared By Novell Labs Marketing
Revision 1.4


Introduction
This paper provides an overview of ODI from several vantage points.  The 
first section will compare ODI with Dedicated IPX.  The second section 
contains an architectural overview of ODI and explains the different 
components and how they interact.  The third section is a comparison of ODI 
with Microsoft's NDIS.  The focus of this paper will be in helping to 
understand the advantages of ODI and explain why ODI is Novell's 
recommended specification.


S_Hinweise:
Windows NT Intel Diagnostic Driver Version 1.01

This disk contains the Windows NT diagnostic software and
documentation for Digital ATMworks 351 PCI/ATM NIC.  The
ATMworks 351 is an ATM network interface card (NIC) that
provides high performance PCI-to-ATM connectivity.


S_Hinweise:
You are ready to install the IBM Internet Connection Server V4R2 for OS/2 Warp.
                                                                         
Before continuing, make sure your system meets all the following
requirements:     

o If you are migrating from a previous release or want to reinstall 
  the US-Canadian version of the V4R2 Internet Connection Secure
  Server for OS/2, you must first delete the current version of the 
  server using the current server's installation utility.  For details, see 
  the Internet Connection Secure Server's Quick Beginnings book.
                                                                         
o You MUST install the server on an HPFS-formatted drive;
   it cannot be installed on a FAT-formatted drive.
                                                                         
o You must have OS/2 Warp V3.0 (or later), or OS/2 Warp Server, or 
   OS/2 Warp-J.

o  New APARs and CSDs are available for different versions of OS/2 Warp and TCP/IP.
 
                                                       TCP/IP
   OS/2 level              TCP/IP    MPTS CSD        CSD                APARs
   ----------------    ------    ---------    --------    ----------------------
   Warp                     V2.0                       UN64092     PN71501
   Warp Connect            V3.0       WR08210      UN00959     IC15427
   Warp Server              V3.1                       UN00959     IC15782
   Warp Server SMP        V3.5                                      IC16401, then IC15968
   Warp V4 (Merlin)        V4.0                                      IC16063, then IC16782


S_Hinweise:
Dual 32-bit CREATIX ISDN CAPI 1.1 + 2.0 for Windows 3.1 and Windows 95
plus NDIS WAN Miniport-driver + ISDN Accelerator Pack 1.1 for Windows 95.


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  NETWARE.DRV 3.03 Windows NetWare Shells (VLM)
README FOR:  WINDR3.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare Client for DOS/MS Windows 1.2

ABSTRACT:

This file contains updated Windows Driver files for workstations
using either VLMs or NETX.  This file includes NETWARE.DRV v3.03
Rev A released for workstations using the VLMS with Windows 3.1x
or Windows for Workgroups 3.11.  NETWARE.DRV v2.02 and its HLP
file are version specific for NETX and have been moved to
NET33X.EXE. The updated VIPX.386 v1.19 included in this file,
needs to be used with LSL.COM v2.12 or higher, and IPXODI.COM
v3.01 or higher from VLMUP4.EXE.



-----------------------------------------------------------------
 DISCLAIMER
 THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO
NOVELL.  NOVELL
 MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE
 INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL
 MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.

-----------------------------------------------------------------

S_Intern:
Latest Window's Update's from Novell's Web Site


S_Hinweise:
Release Notes (B) 93000254B
                           for
                  DataFire PRIme Adapter
                       Driver for
                       Windows NT
                    v1.2.1 Release C
                        3/17/97


S_Hinweise:
This (English) IntranetWare Client for Windows 95 (v2.12) contains the Network installation version of the Windows 95 client. The 2.12 version is available only in English.


S_Hinweise:
Release Notes (B) 93000254B
                           for
                  DataFire PRIme Adapter
                       Driver for
                       Windows NT
                    v1.2.2 Release C
                        3/17/97


S_Hinweise:
Disclaimer
==========

THIS DRIVER IS SUPPLIED TO YOU FOR NO CHARGE, "AS-IS" AND WITH NO 
WARRANTY OF ANY KIND WHATSOEVER.  USE OF THIS DRIVER IS ENTIRELY
AT YOUR OWN RISK AND THE SUPPLIER WILL NOT BE HELD LIABLE FOR ANY
LOSSES HOWSOEVER INCURRED, DIRECT OR CONSEQUENTIAL, THROUGH ITS 
USE OR ABUSE, INCLUDING (BUT NOT LIMITED TO) DATA LOSS ON CD-ROMS 
OR HARD-DRIVES AND INABILITY TO BOOT YOUR COMPUTER.

IF YOU DO NOT AGREE TO THESE TERMS, DO NOT ATTEMPT TO INSTALL THE DRIVER!


Introduction
============

This is the readme file for the patched SCSICDRM.SYS driver 
for Windows/NT v3.51.

This cdrom driver replaces the one from Microsoft and enables you to 
use Yamaha recorders as CD-ROM stations (reader). GEAR must be set
to WINASPI or Cyclical buffer to be able to find the recorder after
installing the driver! See the release notes of GEAR for further details.

This driver also solves the problem of reading multi-session discs with
the following recorders:

PHILIPS CDD2000
Plasmon CDR4220
HP Surestore
Grundig CDR100IPW

S_Intern:
Driver that allows you to use the DW-S114X as a reader under Windows NT


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                      8020.EXE LATEST Drivers
          For EtherEZ PC Card and EtherEZ PC Card+Modem
                         Ethernet Adapters

                         RELEASE INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                               All rights reserved.

                        Version 0.09     24 February 1997


This release information describes the version history of 8020.EXE drivers.

SUPPORTED ADAPTERS

o EtherEZ PC Card
o EtherEZ PC Card+Modem

VERSION HISTORY

-- Version 0.09 (Current Release) --

	Update OEMSETUP.INF  file for Windows NT.

__ Version 0.08

S_Intern:
Latest files for the 8020 PCMCIA adapters


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

              Novell NetWare DOS ODI Workstation Driver
                   For PCMCIA Ethernet LAN Adapters

                         RELEASE INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1993 Standard Microsystems Corporation.
                         All rights reserved.

                Version 1.02          June 07, 1994


This driver conforms to the ODI Developer's LAN Driver Toolkit
Guide for DOS WorkStation HSMs, version B, 18 June 1992.

This release information describes the version history of the 
Novell NetWare DOS ODI workstation driver for PCMCIA.

Note: This driver supports 8016 PCMCIA Ethernet Adapters only.


VERSION HISTORY

-- Version 1.02  (5/11/94)

    Added workaround so hot swapping will works with Toshiba/Phoenix card
    and socket services.

    Added workaround so the driver will unload properly with Toshiba/Phoenix
    card and socket services.

S_Intern:
8016 PCMCIA novell dos odi drivers v1.02


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION
                          
                              PC Agent
         For Ethernet and TokenCard Elite Series LAN Adapters


                        RELEASE INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.

                   Version 1.31     2 June 1993



VERSION HISTORY

-- Version 1.31 (Current Version) --

   Added code to use default configuration file name, PCAGENT.CFG,
   if no file name is specified in the command line. PCAGENT will
   retrieve the configuration file from the path where PCAGENT is
   resided. If PCAGENT.CFG is not found, PCAGENT will continue 
   with some of the parameters not initialized.    

-- Version 1.30 --

   Reduced code size.


S_Hinweise:
Update to Windows 95 TCP/IP Out-Of-Band issue


S_Hinweise:
EN2015 Intelligent MGT Hub firmware file ver. 2.11


S_Hinweise:
Firmwareupdate auf die Version 2.10 für die COMfour Nebenstellenanlage mit Hardwarepatch


S_Hinweise:
SMS Write PDF.This is an updated version of the tool designed to allow you to create PDFs from packages.


S_Hinweise:
Windows 95 WinSock Update to Improve Multihoming Support


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION
                         NDIS 2.01 driver 
                For EliteCard PCMCIA LAN Adapters


		       RELEASE INFORMATION

	Version 1.02                       20 June 1994

VERSION HISTORY

-- Version 1.02 --

Updated Card Services Support.
Fixed Hot Swap machine lockup problem.

-- Version 1.01 --

Updated card services support.

-- Version 1.00 --

Initial Driver release.

NOTE: The OS/2 driver is currently not supported. We are working
with IBM to resolve the Card/Socket Services issues.


EtherCard PLUS, TokenCard, and SuperDisk are trademark, and 
SMC and Standard Microsystems are registered trademarks of 
Standard Microsystems Corporation. Other trademarks
mentioned herein belong to their respective companies.


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                              Packet Driver 
                  For 8016C/PC Ethernet LAN Adapters

                           INSTALLATION GUIDE

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.


VERSION HISTORY

-- Version 11.3.0 (Current Version) --

   Initial version developed by Crynwr.  Based on Clarkson Packet 
   Driver.


This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788. 


SMC and Standard Microsystems are registered trademarks; and 
EliteCard, Elite Series, EZStart, SuperDisk, UltraChip, and UMAC/LMAC


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                             SuperDisk 
                  For 8016C/PC Ethernet LAN Adapters

     This software is licensed by SMC for use by its customers only.
         Copyright (c) 1994 Standard Microsystems Corporation.
                       All rights reserved.

                   Version 1.3       6 October 1994
                  Compressed Driver File SMCD13.EXE


DISK INFORMATION

This SMC SuperDisk is designed to be used with SMC's EZStart Program,
which is on this SuperDisk.  EZStart configures and tests your adapter, 
copies the files you need from this disk to your PC, and displays or 
prints appropriate instruction files that are located on this disk.


SYSTEM REQUIREMENTS

To use EZStart, your system must meet the following minimum requirements:

o  MS-DOS or PC-DOS operating system, version 3.13 or later, which
   is required to run the EZStart program

o  Card and socket services software -- compliant with PCMCIA 
   specification version 2.01 or higher -- must already be installed
   on your computer. Otherwise, you cannot access your computer's 
   PCMCIA slot(s). For more information, refer to the SMC EliteCard 
   PCMCIA Ethernet Adapter User Guide.


S_Hinweise:
XFOR: IMC May Lose Messages if Code Pages Incorrect on Embedded Messages


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                         DOS NDIS Driver
                For 8016C/PC Ethernet LAN Adapters

                        RELEASE INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.

                   Version 1.01     22 March 1994


This release information describes:

o  Known problems with the DOS NDIS driver.

o  The version history of the DOS NDIS driver.


VERSION HISTORY

-- Version 1.01 (Current Version) --

   Initial release.

   Known Problems

   When using Elite View on an IBM Model 90 and PCAgent on a
   Panasonic notebook, the Elite View station (IBM Model 90)
   will report "Agent not Responding".

S_Intern:
8016 PCMCIA WFW3.1 Driver with NDIS 2.01 Spec


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                                     SuperDisk
            For EtherEZ PC Card and EtherEZ PC Card+Modem
                               Ethernet Adapters

     This software is licensed by SMC for use by its customers only.
         Copyright (c) 1996 Standard Microsystems Corporation.
                               All rights reserved.

                    Version 1.0             26 June 1996


DISK INFORMATION

This SMC SuperDisk is designed to be used with SMC's EZStart Program,
which is on this SuperDisk. EZStart configures and tests your adapter,
copies the files you need from this disk to your PC, and displays or 
prints appropriate instruction files that are located on this disk.

The EZStart default directory may be a:\. Please make a backup copy of
your SuperDisk before EZStart copies de-compressed driver files to
the SuperDisk to create an "option" diskette.


SUPPORTED ADAPTERS

o  EtherEZ PC Card adapters (8020T and 8020BT PC Card types)
o  EtherEZ PC Card+Modem adapters (8020TM and 8020BTM PC Card types)


S_Hinweise:
Calling HRBackupGetDatabaseNames returns invalid parameter error.


S_Hinweise:
Firmwareupdate für den 1 Kanal A/B-Wandler auf die Version 1.10A. Mit dieser Firmware ist die Rufweiterschaltung möglich.


S_Hinweise:
EN2022 Intelligent Hub firmware file ver. 2.11


S_Bezeichnung:
EtherHub 1500 series(EH1502..) MIB file - US


S_Hinweise:
Firmwareupdate für den 2 Kanal A/B-Wandler auf die Version 1.11. Mit dieser Firmware ist die Rufweiterschaltung möglich. 
Gegenüber der Version 1.10A gilt zusätzlich: 
*97*# 3.1 kHz Audio (default) 
*96*# Speech 
*95*# 3.1 kHz Audio mit HLC Fax


S_Hinweise:
Rockwell RCV288DPi(6682-24) and RC288DPi(6682-26) chipset upgrage to 33.6Kdps

S_Intern:
Rockwell RCV288DPi(6682-24) and RC288DPi(6682-26) chipset upgrage to 33.6Kdps


S_Hinweise:
ROCKWELL RC336ACF chipset 33600 Voice modem Verson 2.05 DATE

S_Intern:
ROCKWELL RC336ACF chipset 33600 Voice modem Verson 2.05 DATE


S_Hinweise:
SNA 2.11 Service Pack 2 Win 3.x, MS-DOS, OS/2 Client update


S_Hinweise:
SNA 2.11 Service Pack 2 Eicon WAN Services Drivers (Intel)


S_Hinweise:
SNA 2.11 SP2 Windows NT Client update (Intel)


S_Hinweise:
SNA 2.11 Service Pack 2 Windows NT Server Update -Intel


S_Hinweise:
SNA 2.11 SP2 Windows NT Client update (Alpha)


S_Hinweise:
SNA 2.11 Service Pack 2 Windows NT Server Update -Alpha


S_Hinweise:
SNA 2.11 Service Pack 2 Eicon WAN Services Drivers (Alpha)


S_Hinweise:
SNA 2.11 TN3270 Server Update -Intel, Alpha


S_Hinweise:
SNA 2.11 SP2 Windows 95 Client - Full client


S_Hinweise:
SNA Server 3.0 Service Pack 1 Win 3.x, MS-DOS, OS/2 Client updates


S_Hinweise:
SNA Server 3.0 Service Pack 1 Host security update (Intel & Alpha)


S_Hinweise:
SNA Server 3.0 Service Pack 1 Windows NT client update (Intel)


S_Hinweise:
SNA Server 3.0 Service Pack 1 Server update (Intel)


S_Hinweise:
SNA Server 3.0 Service Pack 1 Workstation update (Intel)


S_Hinweise:
BUG: OpenGL Color Problems using Service Pack 2 for Windows NT 4.0


S_Hinweise:
SNA Server 3.0 Service Pack 1 Windows NT client update (Alpha)


S_Hinweise:
SNA Server 3.0 Service Pack 1 Server update (Alpha)


S_Hinweise:
Microsoft Systems Management Server Version 1.2           
                      U.S. Service Pack 2


S_Hinweise:
EH1502 Intelligent Hub firmware ver 2.03 and
Out-of-Brand program ver. 2.02


S_Hinweise:
DEC FDDIcontroller PCI/EISA DOS Firmware Upgrade Disk (v3.10)

This directory contains the following files:

README.TXT   -  This file
RELEASE.NOT  -  DECblast Release Notes
DECBLAST.EXE -  Firmware Upgrade Application executable that runs
		under DOS and communicates directly with the DEFEA/DEFPA
		to update the DEC FDDIcontroller/EISA/PCI firmware.
DFEAB.310    -  S-Record Firmware File v3.10 (DEFEA Rev 2 Only)
DFXAA.310    -  S-Record Firmware File v3.10 (DEFEA Rev 3 and DEFPA Only)
DFEAA.130    -  S-Record Firmware File v1.30 (DEFEA Rev 1 Only)


S_Hinweise:
Index Server 1.1 italian
Requiers Windows NT Server 4.0 and Internet Information Server 2.0.


S_Bezeichnung:
Firmware TURBOchannel DEFTA-AA v2.4 - US

S_Hinweise:
DEC FDDIcontroller/TURBOchannel

DEFTA-AA Firmware, Version 2.4


S_Hinweise:
Microsoft Windows NT 3.51 Workstation and Server Service Pack 5 (Alpha)


S_Bezeichnung:
Firmware TURBOchannel DEFTA-DA v2.4 - US

S_Hinweise:
DEC FDDIcontroller/TURBOchannel

DEFTA-DA Firmware, Version 2.4


S_Bezeichnung:
Firmware TURBOchannel DEFTA-UA v2.4 - US

S_Hinweise:
DEC FDDIcontroller/TURBOchannel

DEFTA-UA Firmware, Version 2.4


S_Hinweise:
Microsoft Windows NT 3.51 Workstation and Server Service Pack 5


S_Hinweise:
Microsoft Windows NT 3.51 Workstation and Server Service Pack 5 italian


S_Hinweise:
Microsoft Exchange 5.0 Resource Kit for Windows NT - Alpha. Contains all primary components of the Resource Kit


S_Hinweise:
Microsoft Exchange 5.0 Resource Kit for Windows NT - Intel. Contains all primary components of the Resource Kit


S_Hinweise:
Microsoft Exchange 5.0 Resource Kit for Windows 95. Contains all primary components of the Resource Kit


S_Hinweise:
IIS 3.0 : NetShow On-Demand Tools (US English)


S_Bezeichnung:
Firmware TURBOchannel DEFTA-FA v1.1 - US

S_Hinweise:
DEC FDDIcontroller/TURBOchannel

DEFTA-FA Firmware, Version 1.1


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
LAN WorkPlace Pro for Windows 95/NT 5.1

ABSTRACT:

LPO51A.EXE is the first maintenance patch for the LAN WorkPlace Pro for Windows
95/NT and is recommended for all sites with LAN WorkPlace Pro for  Windows
95/NT.  Includes numerous fixes.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
LAN WorkPlace 5 for MS Windows and DOS
LAN WorkGroup 5
NCS Client 1.0
LAN WorkPlace Pro for Windows 95/NT 5.1

ABSTRACT:

This patch contains both the configuration and binaries necessary to support
connecting to PASV FTP servers.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare Connect 1.0
LAN WorkGroup 4.2
LAN WorkPlace for DOS 4.2
LAN WorkPlace 5 for MS Windows and DOS
NetWare Connect 2.0

ABSTRACT:

  NWCMOD always contains the newest modem scripts for NetWare Connect, LAN
WorkPlace 5 & 4.2, and LAN WorkGroup 4.2.  It currently contains AIOMDMS1.MDC,
AIOMDMS2.MDC and NLABSMDM.MDC dated 4/18/97. NLABSMDM.MDC contains all modem
scripts specifically certified by Novell Labs.  Also included are MODEMS.TXT (a
list of modems contained in these files), TSHOOT.TXT (some modem script
troubleshooting tips) and MWAVE.TXT (special info relative to the configuration
of a MWave modem).


S_Bezeichnung:
Drv. DS/PC Card / ISA NDIS3 (WIN 95) - US

S_Hinweise:
RoamAbout DS/PC Card & ISA NDIS3 Driver for Windows 95/OSR2

This driver is for the recently released Windows 95/OSR2 operating system. Under 'Control Panel" / "System" you will see the Windows 95 version as either "4.00.950", "4.00.950a" or "4.00.950b" where "4.00.950b" is also known as OSR2. It will also work with pre OSR2 systems and will be released after a couple of weeks of internal testing.


S_Hinweise:
Please refer to LAN WorkPlace f. Windows 95-NT 5.1 category


S_Hinweise:
Please refer to LAN WorkPlace 5 for MS Windows and DOS


S_Hinweise:
RoamAbout DS/PC Card NDIS3 Driver

This driver is for the RoamAbout DS/PC Card. In order to run it on a Windows 95 or Windows NT system, you MUST upgrade the firmware on your
older PC Card.  Read the README95.TXT or READMENT.TXT file included in the ZIP file to run DSCARDUP.EXE.


S_Hinweise:
Please refer to LAN WorkPlace Pro for Windows 95/NT 5.1 category


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare/IP 2.2

ABSTRACT:

NetWare IP patch, to be applied to NWIP 2.2x only.  Various fixes to DNS, LPR,
and NWIP functions.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
DHCP Server - DHCP

ABSTRACT:

DHCP Server public release to resolve server hangs and DHCP tab file
corruption.


S_Bezeichnung:
Firmware MultiSwitch 600 Stack Director v1.0.0

S_Hinweise:
MultiSwitch 600 Stack Director

dlssm100.bin    Firmware for the MultiSwitch 600 Stack Director, Version 1.0.0
dlssm10.txt     Release Notes for the MultiSwitch 600 Stack Director, Version 1.0


S_Hinweise:
MultiSwitch 612EX

dlmwl100.bin    Firmware for the MultiSwitch 612EX, Version 1.0.0
dlmwl10.txt     Release Notes for the MultiSwitch 612EX, Version 1.0


S_Hinweise:
MultiSwitch Hub 624T

dlmr2110.bin    Firmware for the MultiSwitch Hub 624T, Version 1.1.0
dlmr211.txt     Release Notes for the MultiSwitch Hub 624T, Version 1.1


S_Hinweise:
DECagent 90

denma303.sys    Firmware for the DECagent 90, Version 3.0.3
denma303.txt    Release Notes for the DECagent 90, Version 3.0.3


S_Hinweise:
DECconcentrator 900MX

def6x332.bin    Firmware for the DECconcentrator 900MX, Version 3.3.2
def6x33.txt     Release Notes for the DECconcentrator 900MX, Version 3.3


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare Global MHS 2.0

ABSTRACT:

************************************************
 NetWare Global MHS 2.00F
 November 1, 1996
 ***********************************************


 NetWare Global MHS (GMHS) Version 2.00F provides the following changes:
    o Information about upgrading from GMHS to Groupwise
    o New Method for Updating NGM NLMs
    o New Method for Updating DIRADM.EXE
    o Additional Support for Migration to Groupwise
    o Some Bug Fixes.


S_Hinweise:
DECconcentrator 900TH

defhu332.bin    Firmware for the DECconcentrator 900TH, Version 3.3.2
defhu33.txt     Release Notes for the DECconcentrator 900TH, Version 3.3


S_Hinweise:
DECconcentrator 900FH

defhm332.bin    Firmware for the DECconcentrator 900FH, Version 3.3.2
defhm33.txt     Release Notes for the DECconcentrator 900FH, Version 3.3


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
ManageWise 2.1
ManageWise Virus Protect - MWISE21

ABSTRACT:

WARNING: MAY CAUSE ABENDS IF NOT PROPERLY INSTALLED - SEE INSTALL INSTRUCTIONS
FOR DETAILS.

 Resolves the following server problems: abends when using pattern file 250 or
higher; detection of macro viruses. Workstation fixes: PCSCAN now supports
connections above 255, and it improves performance.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
ManageWise Desktop Management - MWISE21
ManageWise Console - MWISE21

ABSTRACT:

This patch resolves the btrieve status 46 error when attempting to delete
information, or add custom information, to the inventory database.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
ManageWise 2.1
ManageWise Agent for Windows NT Server

ABSTRACT:

This file MWNT01A.EXE has major Enhancements over the previous
 version . Please refer to the readme (MAREAD01.WRI)


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
ManageWise 2.1

ABSTRACT:

MWMIS01.EXE is the new release of ManageWise Export Services
 2.1.  Export Services retrieves topology information from the ManageWise
database and transmits it to third party network management consoles.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
ManageWise 2.1

ABSTRACT:

This file is an update to ManageWise 2.1.  It fixes many important
 issues regarding ManageWise 2.1. This patch should be loaded before
 contacting Tech Support . Please note that naming conventions have been
established  for ManageWise patch files. These standards are documented in TID # 2913237.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare Management Agent 2.1
ManageWise 2.0

ABSTRACT:

NMA21.EXE provides a new SERVINST.NLM for servers running NetWare Management
Agent 2.1.  (NMA 2.1 is part of ManageWise 2.0 and can also be purchased
separately).  The new SERVINST.NLM deals with a "benign problem" which results
in apparent 100% CPU utilization at BuildUserListHour.


S_Hinweise:
GIGAswitch/FDDI Firmware, Version 3.1 FDDI Line Cards

fg2-31.rsx      Operational Firmware for FGL-2 module, Version 3.10
fg4-31.rsx      Operational Firmware for FGL-4 module, Version 3.10


S_Bezeichnung:
Drv. CreditCard Ethernet+Modem II (WIN) v2.52 -US

S_Hinweise:
.
.                  XIRCOM CREDITCARD ETHERNET+MODEM II
.                             Version 2.52
.                           August 13, 1996

=============================================================================

Thank you for purchasing the Xircom CreditCard Ethernet+Modem II Adapter.
Xircom has done everything to ensure that our adapter is compatible with the
widest range of notebook and laptop PCs possible.  As a company, we are
equally committed to customer satisfaction and timely response to the needs
and concerns of our customers.

If you have compatibility issues related to your specific environment, or
require additional information, please refer to the CreditCard Ethernet+Modem
II User's Guide.

Remember to register your Xircom adapter to receive information about
future software upgrades and new products.

CONTENTS
========
   1) Release Notes/Known Limitations
   2) Windows '95
   3) CXCFG.EXE Configuration Utility
   4) Special Configuration Notes
   5) Machine Specific Notes
   6) NDIS3 Driver Under Windows for Workgroups
   7) Modem
   8) Modem Utilities
   9) Xircom Technical Support


S_Bezeichnung:
Drv. CreditCard Ethernet 10/100 v1.30 (WIN/NT) -US

S_Hinweise:
.
.                XIRCOM CREDITCARD ETHERNET ADAPTER 10/100
.                Driver Disk Software Release Version 1.30
.                            November 1, 1996

=============================================================================


Thank you for purchasing your Xircom CreditCard Ethernet Adapter 10/100. 
Xircom has done everything to ensure that our adapters are compatible 
with the widest range of notebook and laptop PCs possible. As a company,
we are equally committed to customer satisfaction and timely response to 
the needs and concerns of our customers.  

If you have compatibility issues related to your specific environment, or 
require additional information, please refer to your Xircom CreditCard 
Ethernet Adapter 10/100 User's Guide.  

Remember to register your Xircom adapter to receive information about 
future software upgrades and new products.


CONTENTS
========
   1) Xircom CreditCard Ethernet Adapter 10/100 Characteristics
   2) Release Notes/Known Limitations
   3) Machine Specific Notes
   4) SNMP Agent
   5) Xircom Technical Support

S_Intern:
CreditCard Ethernet Adapter 10/100 Drivers v1.30


S_Bezeichnung:
BIOS Update CC Ether+Modem II v4.16 (DOS) -US

S_Hinweise:
.                XIRCOM CREDITCARD ETHERNET+MODEM II
.                          FIRMWARE UPGRADE
.                    Release 4.16 International
.                            October 25, 1996
=============================================================================

This release contains the following:
   - XFLASH Flash ROM upgrade utility
   - CEM2 Firmware Upgrades in a .PAK format.  This firmware is not
.    intended for use with versions of the CEM2 used in the US or Canada.
  

CONTENTS
========
   1) Upgrade Instructions
   2) Release Notes
   3) Xircom Technical Support


S_Hinweise:
.                XIRCOM POCKET ETHERNET ADAPTER III
.                       Release Version 3.51
.                         October 28, 1996
=====================================================================

Thank you for purchasing the Xircom Pocket Ethernet Adapter III (PE3).  
Xircom has done everything to ensure that our adapter is compatible
with the widest range of notebook and laptop PCs. As a company, we 
are equally committed to customer satisfaction and timely response 
to the needs and concerns of our customers.  

If you have compatibility issues related to your specific 
environment, or you have general questions, please contact Xircom
Technical Support.  Information on Xircom Technical Support is 
located at the end of this file.

Remember to register your Xircom adapter to receive information 
about future software upgrades and new products.


CONTENTS
========
   1) Features of this Release
   2) Novell NetWare ODI Driver Notes
   3) Microsoft Windows NDIS 3.0 Driver Notes
   4) Known Issues
   5) Machine Specific Notes
   6) Xircom Technical Support


S_Hinweise:
CreditCard Token Ring+Modem Adapter Drivers

S_Intern:
CreditCard Token Ring+Modem Adapter Drivers


S_Hinweise:
APAR(s) IR35155 & IR35156 for 2217MpC Release 2

   This package contains apars IR35155 and IR35156 for the 2217 operating
   on RELEASE 2 and is applied via the 2217 Remote Control Utility (RCU).

   APAR IR35155 PROVIDES THE CODE NESESSARY TO CORRECTLY APPLY TR35156
   AND MUST BE APPLIED AND IML'ED PRIOR TO INSTALLING TR35156.

   INVAPAR.EXE IS ALSO INCLUDED IN THIS PACKAGE AND MUST BE COPIED INTO
   THE SAME SUBDIRECTORY ON YOUR RCU WORKSTATION WHICH CONTAINS THE 2217
   RCU APPLICATION PRIOR TO INSTALLING IR35155 AND IR35156.  THE RCU MUST
   BE AT VERSION 3.00.01 OR LATER.

   Apar IR35156 applies to all 2217s configurations operating on
   release 2 and is the LATEST Commmunications Server fixpac for
   Communication Server 4.0.


   Shown below are the steps for applying an apar to the 2217MpC
   operating with release 2.  For a more detailed explaination,
   refer to appendix D-9 of the 2217 Nways Multiprotocol Concentrator
   User's Guide for Release 2, GC30-3706-01.


S_Hinweise:
A2814.TSK size 262144 bytes V.34 EXTERNAL


S_Hinweise:
AT&T CHIPSET MODEM 
A2814HZ.TSK size 262144 bytes V.34 INTERNAL for GERMANY


S_Hinweise:
.
.                 XIRCOM CREDITCARD TOKEN RING+MODEM 33.6
.                Installation Disk Software Release Version 1.01
.                           January 21, 1997 
=============================================================================


Thank you for purchasing your Xircom CreditCard Token Ring+Modem
33.6 Adapter. Xircom has done everything to ensure that our 
adapters are compatible with the widest range of notebook and 
laptop PCs possible.  As a company, we are equally committed 
to customer satisfaction and timely response to the needs 
and concerns of our customers.  

CONTENTS
========
   1) Xircom CreditCard Token Ring+Modem 33.6 Adapter Characteristics
   2) Command Line Options for Installation Program
   3) Release Notes/Known Limitations
   4) Machine Specific Notes
   5) Xircom Technical Support

1)  XIRCOM CREDITCARD TOKEN RING+MODEM 33.6 ADAPTER CHARACTERISTICS
    ===============================================================
    This release of Xircom's CreditCard Token Ring+Modem 33.6 has the
    following characteristics:

    -DOS and Windows based installation program.

    -Plug and Play installation under Windows 95

    -Simultaneous use of LAN and modem.

    -Software selectable 16Mbps or 4Mbps network speed.

    -Comprehensive suite of drivers for DOS, Windows 3.X,
     Windows 95, Windows NT and OS/2.

    -Support for UTP and STP Token-Ring connections.

S_Intern:
CreditCard Token Ring+Modem Adapter Installation


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                       ETHER.EXE LATEST Drivers
              For Elite, Elite16, Elite16 Ultra and EtherEZ
			Ethernet LAN Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.

                   Version 0.28        19 March 1997

This release information describes the version history of ETHER.EXE.

SUPPORTED ADAPTERS

o  EtherCard PLUS, EtherCard PLUS Elite, EtherCard PLUS ELite16, 
   EtherCard PLUS Elite/A, EtherCard PLUS, EtherCard PLUS 10T/A
   EtherCard PLUS/A, StarCard PLUS, StarCard PLUS/A, StarCard,
   EtherEZ and Tiger EtherCard. 

VERSION HISTORY

__ Version 0.28 (Current Version)

	Update LSL.COM v2.20.
	Update IPXODI.COM v3.03.
	Update VLM.EXE v1.21.

__ Version 0.27

S_Intern:
Latest files for the Ethernet Family including EtherEZ


S_Hinweise:
ROCKWELL 288DPI chipset modem
 R2814PCA.BZT size 62812 bytes V.34 PCMCIA FOR GERMANY


S_Hinweise:
ROCKWELL 288DPI chipset modem
R2814PCA.GEN size 62844 bytes V.34 PCMCIA


S_Bezeichnung:
Tool CC Token Ring+Modem Diagn. (DOS) v2.05 -US

S_Hinweise:
CreditCard Token Ring+Modem Adapter Diagnostics

S_Intern:
CreditCard Token Ring+Modem Adapter Diagnostics


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                          SuperDisk
            For EtherEZ PC Card and EtherEZ PC Card+Modem
                    Ethernet Network Cards

     This software is licensed by SMC for use by its customers only.
         Copyright (c) 1997 Standard Microsystems Corporation.
                      All rights reserved.

                 Version 2.2           21 February 1997


DISK INFORMATION

This SMC SuperDisk is designed to be used with SMC's EZStart Program,
which is on this SuperDisk. EZStart configures and tests your network
card, copies the files you need from this disk to your PC, and displays
or prints appropriate instruction files that are located on this disk.

The EZStart default directory may be A:\. Please make a backup copy of
your SuperDisk before EZStart copies de-compressed driver files to
the SuperDisk to create an "option" diskette.


SUPPORTED NETWORK CARDS

o  EtherEZ PC Card networks cards (8020T and 8020BT PC Cards)

o  EtherEZ PC Card+Modem network card (8020TM PC Card)


SYSTEM REQUIREMENTS

Your system must meet the following minimum requirements:

o  MS-DOS or PC-DOS operating system, version 3.13 or later.

o  A minimum amount of available hard disk space (typically 50 KB)
   for installing a single driver from the SuperDisk.

   OR

   At least 1.44 MB of available hard disk space if you intend to
   extract all of the drivers from the SuperDisk.

S_Intern:
Latest files for the 8020TM (ethernet/modem) adapters


S_Hinweise:
ROCKWELL 288DPI chipset modem
R2814A.BZT size 65464 bytes V.34 INTERNAL,EXTERNAL FOR GERMANY


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                              SuperDisk
                      For Ethernet LAN Adapters

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1997 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 3.1       30 January 1997
               Compressed Driver File SMCG31.EXE


DISK INFORMATION

This SMC SuperDisk is designed to be used with SMC's EZStart
Program, which is on this SuperDisk. EZStart configures and tests
your adapter, copies the files you need from this disk to your PC,
and displays or prints appropriate instruction files that are located
on this disk.


SYSTEM REQUIREMENTS

To use EZStart, your system must meet the following minimum
requirements:

o  MS-DOS or PC-DOS operating system, version 3.11 or later, which
   is required to run the EZStart program

o  To take advantage of EZStart's graphics features, a VGA or better
   monitor; however, EZStart can operate in text mode on any monitor

o  A minimum amount of available hard disk space (typically 50 KB)
   for installing a single driver from the SuperDisk using EZStart


S_Bezeichnung:
Drv.Set Ethernet EISA Adapters v0.06 -US

S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                   9232.EXE LATEST Drivers
   	For Ether 10/100 Fast Ethernet EISA Network Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 0.06       19 May 1997


This release information describes the version history of the
9232.EXE drivers.


SUPPORTED ADAPTERS

o SMC Ether 10/100 Fast Ethernet EISA Adapter

VERSION HISTORY 

___ Version 0.06 (Current Version)

	Update Windows NT driver SMC9232N.SYS v1.02.

___ Version 0.05

	Update LSL.COM v2.20.
	Update IPXODI.COM v3.03.
	Update VLM.EXE v1.21.

S_Intern:
Latest files for the Fast Ethernet EISA Adapters


S_Hinweise:
2217MpC APAR IR34177

   This package contains apar IR34177 for the 2217MpC operating
   microcode release 2 and is applied via the 2217 Remote Control
   Utility (RCU).

   Patched file(s): acsappc.dll   acsapldr.exe   lanmsgdd.os2
                    acsgwscp.dll  cmkfmsmi.exe   lanmsgex.exe
                    cmkfmapi.dll  cmkfmde.sys    acslan.dll
                    lanmsgdl.dll  landll.exe     landlldd.os2
                    landd.os2     landd.nif      axswcm.exe
                    axsstat.exe   axsconf.exe    axsmain.exe
                    axslandd.sys  axsfiltr.dll   axsiopl.dll
                    lcu.exe       cpsyserr.cmd   sdlcpd.sys
                    sx.exe


S_Bezeichnung:
BIOS CC Modem Adapter Flash v4.32 (DOS) -US

S_Hinweise:
.                XIRCOM CREDITCARD ETHERNET+MODEM 28.8
.                      AND CREDITCARD MODEM 28.8
.                          FIRMWARE UPGRADE
.                     Release 4.32 (International)
.                         February 13, 1997
=======================================================================

This release contains the following:
   - XFLASH Flash ROM upgrade utility
   - CEM28 and CM28 Firmware Upgrades in a .PAK format.  
   - This firmware is not intended for use with U.S. and Canadian
     versions of the CEM28 and CM28. 

CONTENTS
========
   1) Upgrade Instructions
   2) Release Notes
   3) Xircom Technical Support


1) UPGRADE INSTRUCTIONS
   ==================== 
   NOTE: 
   XFLASH must run to completion without interruption. It is recommended
   that AC power be supplied to your laptop to ensure that continuous
   power is available.

1. Copy XFLASH.EXE and the PAK file(s) to a new directory on your hard
   drive.

2. Power off the computer.

3. Insert the adapter.

4. Power on the computer.  When the "Starting MS-DOS" message appears,
   hold down the SHIFT key.

   4a. WINDOWS '95: When starting Windows '95, hit SHIFT + F5.

5. Change to the directory on your hard drive you just created for
   XFLASH and the PAK files.  Type XFLASH and hit Enter.

6. The XFLASH program will update the adapter with the correct
   firmware. 

7. When the update is completed, exit XFLASH by pressing any key,
   and reboot the computer.

8. When rebooting the computer, and the modem is initialized for the
   first time since a firmware update, it may take several seconds
   for the modem to initialize. If you experience any problems, we
   recommend that in a terminal application that you send the 
   following command to "reset" the modem:
   
   AT&F&W&W1

9. This version of the XFLASH program is not compatible with the 
   following laptops:
   AST Ascentia 950N 
   HP Omnibook 600
   HP Omnibook 4000 (not compatible with bottom slot only)
   Gateway 2000 Solo (not compatible with bottom slot only)
   IBM Thinkpad 360C
   IBM Thinkpad 701C
   IBM Thinkpad 755CS
   Sharp 8650

S_Intern:
CreditCard Modem Adapter International Model Flash Upgrade Ver. 4.32


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                           	         SuperDisk
          For EtherPower II 10/100 PCI Network Cards

   This software is licensed by SMC for use by its customers only.
          Copyright (c) 1997 Standard Microsystems Corporation.
                           All rights reserved.

                Version 1.2               27 February 1997


DRIVER REQUIREMENTS

This EtherPower II 10/100 network card (SMC9432TX) requires the
latest SMC network drivers (SMC EtherPower II 10/100 SuperDisk v1.2
or later). It will not operate with drivers provided with previous-
generation SMC Fast Ethernet network cards (SMC9332DST, SMC9332BDT,
SMC9332BVT).

The drivers provided on the SuperDisk that ships with this product
function only with the EtherPower II 10/100 network card (SMC9432TX)
and do not work with previous-generation SMC Fast Ethernet network
cards (SMC9332DST, SMC9332BDT, SMC9332BVT).


EZDIAGNOSTIC UTILITY FOR WINDOWS NT

The EZDiagnostic utility for use with Windows NT and the
EtherPower II 10/100 network card will soon be available. You can
download this utility from SMC's 24-hour Bulletin Board or Web site
when available. Refer to the back cover of your user guide for BBS
numbers and Web site address.

S_Intern:
Latest EZStart v5.55 for Ethernet ISA/PCI/EISA


S_Hinweise:
2217MpC Service Diskette

          [SERVICE.EXE | PN 55H7700 | 9-12-96 | 1,033,724 bytes]


S_Hinweise:
ROCKWELL 288DPI chipset modem
R2814HA.GEN size 62714 bytes V.34 INTERNAL


S_Hinweise:
2217MpC Remote Service

   This package contains code that will perform a 'remote' service disk
   operation on the 2217. RMTSRV.ZIP is applied via the 2217 RCU MDM.
   Detailed instuctions are listed below.

   WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING !

   By applying RMTSRV.ZIP to your 2217, you are resetting the 2217 back
   to the original factory code and configuration. Once RMTSRV has completed,
   the 2217 will automatically reboot and come up as ANYBOX.IBM2217 with
   a MAC address of 40002217FFFF. You will no longer be able to reach the
   the 2217 remotely via the wide area. You will have to connect to the 2217
   either through the LAN adapter or async modem in order to apply a
   new configuration.


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                              SuperDisk 
  For EtherPower, EtherPower^2, and EtherPower 10/100 Family
                       PCI Network Adapters

This software is licensed by SMC for use by its customers only.
     Copyright (c) 1997 Standard Microsystems Corporation.
                     All rights reserved.

                 Version 2.4         12 March 1997


SUPERDISK CONTENTS

The following list describes some of the files contained on this
SuperDisk:

    File             Contents

    README.DOC       This file.


    Utilities/       Contents
    Drivers

    DOS ODI          Open data-link interface driver to be used with
                     ODI protocol stacks.

    EZSTART          Documentation for the EZStart Program.

    EZDOSODI         Batch file that performs an EZStart macro for
                     automatic NetWare client installation.

    NDIS             DOS and OS/2 NDIS drivers to be used with NDIS-
                     compliant network operating systems and protocol
                     stacks. Contain documentation with supporting
                     files information for specific network operating
                     systems.

S_Intern:
EtherPower 10/100 PC Superdisk V2.4 (includes Windows friendly format)


S_Hinweise:
.
.               XIRCOM CREDITCARD MODEM 33.6 GLOBALACCESS
.                             Version 1.08
.                          December 4th, 1996

=============================================================================

Thank you for purchasing the Xircom CreditCard Modem 33.6 Adapter.  Xircom
has done everything to ensure that our adapter is compatible with the widest
range of notebook and laptop PCs possible.  As a company, we are equally
committed to customer satisfaction and timely response to the needs and
concerns of our customers.

If you have compatibility issues related to your specific environment, or
require additional information, please refer to the CreditCard Modem User's
Guide.

Remember to register your Xircom adapter to receive information about
future software upgrades and new products.


CONTENTS
========
   1) CreditCard Modem 33.6 Characteristics
   2) Release Notes/Known Limitations
   3) Machine Specific Notes
   4) Modem
   5) Xircom Technical Support


1) CREDITCARD MODEM 33.6 CHARACTERISTICS
   =====================================
   This release of Xircom's CreditCard Modem 33.6 has the following
   characteristics:

   -Intended for use with the following PCMCIA interface chips:
    Intel 82365 PCIC, Databook TCIC, Cirrus Logic CL-PD6710 or CL-PD6720,
    or Toshiba ICCNT.

   -Any environment with PC Card Standard (v2.00 and above) Card and Socket
    Services.

S_Intern:
CreditCard Modem Adapter Install/Drivers Ver. 1.08


S_Hinweise:
RCU APAR 35308

   This package contains apar 35308 for the 2217 RCU.  This apar IS
   NOT applied to the 2217.

   Patched file(s): 2217CN23.EXE       2217CN32.EXE

   This APAR corrects a problem where TCP/IP Host definitions are
   being duplicated in the 2217 configuration each time a configuration
   is applied to the 2217.


S_Hinweise:
APAR TR35127 - Wrong versions of LANDD.OS2 and LANDLLDD.OS2
          LAN failures after SERVICE disk operation.
          [35127.EXE | 2217 Release 3 | 05-08-97 | 112,022 bytes]


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION


                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1995 Standard Microsystems Corporation.
                         All rights reserved.

                 Version 0.24          27 March 1997


This release information describes the version history of the 
TOKEN.EXE drivers.

Note: This drivers supports all 81xx TokenCard Series ISA and 
      Micro Channel Token-Ring adapters.


VERSION HISTORY

-- Version 0.24 (Current Version) --

	Update Windows 95 driver SMC8100W.VXD v2.10
	Update Windows NT driver SMC8100N.SYS v2.10

__ Version 0.23

	Update LSL.COM v2.20.
	Update IPXODI.COM v3.30.
	Update VLM.EXE v1.21.

__ Version 0.22

	Add LANSERVE directory with OEMSETUP.INF for LANSERVE,
	DOS LAN SERVICE and WFW 3.1.


S_Hinweise:
APAR TR34524 for 2217MpC Release 3

   This package contains apar TR34524 for the 2217 operating on RELEASE 3
   and is applied via the 2217 Remote Control Utility (RCU).

   Patched file(s): OOCSVCS.DLL


S_Hinweise:
2217MpC APAR IR34389

   This package contains apar IR34389 for the 2217 and is applied via
   the 2217 Remote Control Utility (RCU).

   Patched file(s): GSDLLNMS.DLL

   This APAR corrects a problem in which the 2217 will not allow LNM
   to attach properly.


S_Hinweise:
Inf for Windows NT40,NT35 and Windows 95 update ,for all models , Version: 4.0
Inf  drivers for WINDOWS 95,NT4.0,NT3.51 DATE: 4-10-1997


S_Bezeichnung:
BIOS CC Modem Adapter Flash v4.34 (DOS) -US

S_Hinweise:
.                XIRCOM CREDITCARD ETHERNET+MODEM 33.6
.                      AND CREDITCARD MODEM 33.6
.                          FIRMWARE UPGRADE
.                    Release 4.34 (International)
.                           March 31, 1997
=======================================================================

This release contains the following:
   - XFLASH Flash ROM upgrade utility
   - CEM33 and CM33 Firmware Upgrades in a .PAK format.  
   - This firmware is not intended for use with U.S. and Canadian
     versions of the CEM33 and CM33. 

CONTENTS
========
   1) Upgrade Instructions
   2) Release Notes
   3) Xircom Technical Support


1) UPGRADE INSTRUCTIONS
   ==================== 
   NOTE: 
   XFLASH must run to completion without interruption. It is recommended
   that AC power be supplied to your laptop to ensure that continuous
   power is available.

1. Copy XFLASH.EXE and the PAK file(s) to a new directory on your hard
   drive.

2. Power off the computer.

3. Insert the adapter.

4. Power on the computer.  When the "Starting MS-DOS" message appears,
   hold down the SHIFT key.

   4a. WINDOWS '95: When starting Windows '95, hit SHIFT + F5.

5. Change to the directory on your hard drive you just created for
   XFLASH and the PAK files.  Type XFLASH and hit Enter.

6. The XFLASH program will update the adapter with the correct
   firmware. 

7. When the update is completed, exit XFLASH by pressing any key,
   and reboot the computer.

S_Intern:
CreditCard Modem Adapter International/GlobalACCESS Flash Upgrade


S_Hinweise:
2217MpC APAR IR34274

   This package contains apar IR34274 for the 2217 and is applied via
   the 2217 Remote Control Utility (RCU).

   Patched file(s): GETPD.CMD

   This apar may be applied to 2217s operating on either release 2 or 3,
   and updates GETPD.CMD to the latest level.  Four additional files are
   being added to the PDINFO.EXE file that is generated when GETPD.CMD
   is executed.
                 CMLINKS.OUT  - ComServer link status.
                 WACSTAT.OUT  - WAC statistics
                 NETSTATF.OUT - RouteXpander frame relay statistics
                 APARDIR.OUT - Directory listing of C:\apars


S_Hinweise:
Firmware update utility for PCMCIA models
1414PC ,2814PC and 3314PC .... 
Only DM-1414PC ,2814PC and 3314PC PCMCIA MODEM can use "ACEEX.EXE"
to flash memory upgrade.


S_Hinweise:
2217MpC APAR IR33816

   This package contains apar IR33816 for the 2217 and is applied via
   the 2217 Remote Control Utility (RCU).

   Patched file(s): 2217CONV.EXE

   This apar corrects a problem where the async modem will no longer
   answer the phone after applying a configuration that was converted
   from a release 1 configuration into a release 2 configuration via
   the 2217 RCU.

***************************************************************************
*                                                                         *
*  PLEASE NOTE THAT THE INSTALLATION OF THIS APAR DIFFERS FROM OTHER 2217 *
*  APARS THAT YOU MAY HAVE INSTALLED.  THIS APAR INCLUDES A FILE WHICH    *
*  MUST BE COPIED ONTO YOUR RCU WORKSTATION.                              *
*                                                                         *
***************************************************************************

I


S_Hinweise:
2217MpC APAR IR33629

   This package contains apar IR33629 for the 2217 and is applied via
   the 2217 Remote Control Utility (RCU).

   Patched file(s): REACTX25.EXE       ACSSVC16.DLL

   This apar applies to 2217 configurations operating on release 2 code
   and configured for X.25 communications. This apar provides the
   ComServer utility REACTX25 which is will cause DTR and RTS to
   return to the ON state after a physical link has been disconnected.

   Shown below are the steps for applying an apar to the 2217MpC
   operating with release 2.  For a more detailed explaination,
   refer to appendix D-9 of the 2217 Nways Multiprotocol Concentrator
   User's Guide for Release 2, GC30-3706-01.


S_Hinweise:
2217MpC APAR IR33523

   This package contains apar IR33523 for the 2217MpC operating
   microcode release 2 and is applied via the 2217 Remote Control
   Utility (RCU).

   Patched file(s): CCDMAIN.DLL

   This apar applies to configurations running R2 configured for X.25
   and resolves a problem where the async modem will no longer answer
   a call after the X.25 configuration is applied.  If this apar is
   applied AFTER the problem is encountered, the configuration must
   be reapplied after this apar is installed to recover the modem.

   Shown below are the steps for applying an apar to the 2217MpC
   operating with release 2.  For a more detailed explaination,
   refer to appendix D-9 of the 2217 Nways Multiprotocol Concentrator
   User's Guide for Release 2, GC30-3706-01.


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                               EZStart
               For TokenCard EliteSeries LAN Adapters

                              USER GUIDE

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.


This user guide describes:

o  Major features of EZStart
o  Program-installation procedures
o  How to use EZStart with various displays
o  How to detect and resolve I/O conflicts
o  Multiple SMC Token Ring adapters
o  What macros are and how to use them
o  Command line options

Note: This version of EZStart supports SMC TokenCard EliteSeries
      ISA and EISA adapters.


MAJOR FEATURES

Custom Test

This function includes the Basic Adapter Test and Two Node Test.
The Basic Adapter Test verifies the operation of the adapter's
electronic components. The Two Node Test verifies the adapter-to-
network connection. To run the Two Node Test, set up one PC as
an Initiator and set up another PC as a Responder.

Driver Installation

This function provides access to the .DOC files and driver files on 
your SuperDisk. You need only select the Network Operating System 
you are using. EZStart will allow you to copy the appropriate 
drivers and information files to the Destination Directory of your 
choice. EZStart also lets you view or print documentation files that 
provide more information on installing the device driver.


S_Hinweise:
.                 XIRCOM CREDITCARD ETHERNET+MODEM 28.8
.                             Version 2.42
.                            March 13, 1997
=============================================================================

******************** Special Upgrade Instructions ***************************
*                         Windows '95 and NT                                *
*                                                                           *
*   If you already have a CEM28 installed under Windows '95 or NT, it is    *
*   important that you follow the upgrade instructions in Section 1.        *
*****************************************************************************

Thank you for purchasing the Xircom CreditCard Ethernet+Modem 28.8
Adapter.  Xircom has done everything to ensure that our adapter is
compatible with the widest range of notebook and laptop PCs possible.
As a company, we are equally committed to customer satisfaction and timely
response to the needs and concerns of our customers.

If you have compatibility issues related to your specific environment, or
require additional information, please refer to the CreditCard 
Ethernet+Modem User's Guide and/or Troubleshooting Guide.

Remember to register your Xircom adapter to receive information about
future software upgrades and new products.


CONTENTS
========
   1) Windows '95, Windows '95 OSR2 and NT - Special Upgrade Instructions
   2) CreditCard Ethernet+Modem 28.8 Characteristics
   3) Release Notes/Known Limitations
   4) CXCFG.EXE Configuration Utility
   5) Special Configuration Notes
   6) Machine Specific Notes
   7) Modem
   8) Installation Program
   9) Xircom Technical Support


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

              		MASTER32.EXE LATEST Driver
                     For TokenCard Elite Master32 LAN Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.

                 Version 0.03          19 March 1997


This release information describes the version history of the 
MASTER32.EXE driver.

Note: This driver supports the SMC 83M32 TokenCard Elite Master32 
      Token-Ring adapters.


VERSION HISTORY

-- Version 0.03 -- (Current Version)

	Update LSL.COM v2.20
	Update IPXODI.COM v3.03
	Update VLM.EXE v1.21

__ Version 0.02

	Update IPXODI.COM v3.02
	Update NETX.EXE v3.32 (941122)

__ Version 0.01

	Initial Release

S_Intern:
Latest files for the Token Master 32 Adapters


S_Hinweise:
.
.                 XIRCOM CARDBUS ETHERNET 10/100 ADAPTER
.                Driver Disk Software Release Version 1.11
.                           December 6, 1996	
=============================================================================


Thank you for purchasing your Xircom CardBus Ethernet 10/100 Adapter. 
Xircom has done everything to ensure that our adapters are 
compatible with the widest range of notebook and laptop PCs possible.  
As a company, we are equally committed to customer satisfaction and timely 
response to the needs and concerns of our customers.  

Xircom's CardBus Ethernet 10/100 Adapter is designed to work with 
portable PC's which include a CardBus PC Card slot. CardBus is the next
generation PC Card (PCMCIA) standard. It enables portable PC's to 
incorporate a PCI based 32-bit bus, which dramatically improves performance.

As the leader in mobile networking, Xircom is leading the market in the
development of CardBus products.  Because CardBus is a new technology, 
support for CardBus in many popular operating systems and Card and Socket
Services software is not yet implemented. 

In this README file, we have included the latest information on support
for CardBus. It is important that you read this file before installing
the product. Because the CardBus environment is changing rapidly, we
have setup three ways for you to get the latest information:

1.  The Xircom Website
Visit the Xircom website at http://www.xircom.com/ for the latest CardBus
information.

S_Intern:
CardBus 10/100 Adapter Drivers Ver. 1.10


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                    9432.EXE LAZTEST Drivers
          For EtherPower II 10/100 PCI Network Cards 

                       RELEASE INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1997 Standard Microsystems Corporation.
			 All rights reserved.

	         Version 0.02               May 14, 1997



VERSION HISTORY

--Version 0.02 (Current Version)

	Update Windows NT, Windows 95 driver SMC9432.SYS v1.02
	Update Windows for Workgroup 3.11 driver SMC9432W.386 v1.02
	Update NDIS 2 driver SMC9432.DOS v1.02
	Update DOS ODI driver SMC9432.COM v1.02

__Version 0.01 

	Initial release.

This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation, 80 Arkay Drive,
Hauppauge, NY 11788.

S_Intern:
Latest files for the 9432 PCI 10/100 Adapters.


S_Bezeichnung:
IntranetWare Client Admin Files (for DW & 95)

S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
IntranetWare Client for DOS/WIN 3.x 2.12
IntranetWare Client for Windows 95 2.12

ABSTRACT:

These files are provided as a supplement to the v2.12 release of the
IntranetWare Clients for DOS/Windows 3.x and Windows 95 (i.e., DWENU_N3.EXE and
95ENU_N3.EXE).  Included are utilities for the DOS ACU install, a diagnostic
utility (NWD2), INF files for the MSBATCH install, the CLIENT32.ADM policy
template file, a few required patches for NetWare 3.11 and 4.10, and two MIB
files for NMS.
 These are the same files that are included with IntranetWare and NetWare 4.11
and the previous release of the Novell Clients (v2.11).


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  Uninstall for Client 32 for Windows 95
README FOR:  W95UNC.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare Client32 Win95 2.11
NetWare Client32 for WIN95 2.1

ABSTRACT:

Use UNC32.EXE to uninstall the NetWare Client 32 for Windows 95 from a
workstation.


S_Bezeichnung:
Diagnose Utility 80XX Adapters v4.01 -US

S_Hinweise:
DIAGNOSTIC PROGRAM FOR
                8003/8013 FAMILY LAN ADAPTERS

          Version 4.01                 April 24, 1992
		      		       	       	     
VERSION HISTORY

-- Version 4.01 -- (Current Version)
	       
Bug fixes:
	Fixed command line mode not finding 8013WP/A and 8013 EP/A
	adapters.
	
-- Version 4.00 --
		  
Bug fixes:

        8013EW Link Integrity Test option in Set Configuration listed
        three options, the third being blank or garbage data.
        
        Locked up on some machines during RAM test in Basic Adapter Test
        when RAM base was below D000.

Other revisions:

        Changed Western Digital messages to Standard Microsystems
        messages.


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 4.1
Windows 95
NetWare Client32 for WIN95 2.1
Printing WIN 95
IntranetWare
NetWare 4.11
NetWare Client32 Win95 2.11

ABSTRACT:

This file contains the released IntraNetWare Version of NPRINTER for Windows 95
(NetWare Nprinter Manager) that is compatible with the NetWare Client 32 for
Windows 95.


S_Bezeichnung:
Drv./Instructions for Networking games -US

S_Hinweise:
SMC Technical Support Information on using network games that 
need an IPX or TCP/IP stack

TABLE OF CONTENTS

Network Documentation
Win95 Documentation
Network Documentation  
SMC Network adapter Sample 

Overview

Most network games need a protocol in which to communicate with over 
the network. The most common stack used is IPX, but TCP/IP can also be used.

DOS

If you are using DOS and want to communicate between two or more systems,
you will need to load either one of the examples below before you start 
the game:

Sample # 1 With an IPX network running.
IPX.COM - for the specific adapter.

Sample # 2 With or Without an IPX network running.
LSL.COM - Novell ODI stack.
DRIVER - Network Card driver (eg. SMC8000.COM).
IPXODI.COM - Novell ODI stack.
IPXSETUP.EXE - Supplied with your game software.

S_Intern:
Drivers/Installation instructions for networking games


S_Hinweise:
Please refer to IntranetWareClient f. Win95 v2.12


S_Bezeichnung:
IntranetWare Client Dos/Win (Net Inst Englsh)

S_Hinweise:
IntranetWare Client Dos/Win (Net Inst Englsh)


S_Bezeichnung:
Client 32 DW German Language Modules v2.11

S_Hinweise:
Client 32 DW German Language Modules v2.11


S_Bezeichnung:
Client 32 DW English Language Modules v2.11

S_Hinweise:
Client 32 DW English Language Modules v2.11


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                       Network Address Program
         For Ethernet and TokenCard Elite Series LAN Adapters

                         RELEASE INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 6.02     27 September 1994


VERSION HISTORY

-- Version 6.02 (Current Version) --

   Added support for 8416, 82M32, 83M32, 8016C/PC.
   Added EISA motherboard ID display.
   Added IRQ and Ram Base display.
   Fixed problem with NADD not finding all ISA adapters.

-- Version 5.00 --

   Added support for all 8216 Ethernet boards. 

   Combined the Ethernet and Token-Ring versions into one executable 
   program. 

   Fixed the problem of the Token-Ring board ID not being found.

S_Intern:
Node Address Utility for ISA/EISA/MCA ethernet and token ring adapters


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                   SMC3016.EXE LATEST Drivers
   	For SMC3000 Series ISA and MCA of Ethernet Network Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 0.03       3 February 1997


This release information describes the version history of the
3016.EXE drivers.


SUPPORTED ADAPTERS

o  SMC3016, SMC3016TP ISA Ethernet adapters.
o  SMC3016/MC and SMC3016TP/MC Ethernet adapters.
o  SMC3008 and SMC3008TP Ethernet adapters.


VERSION HISTORY 

___ Version 0.03 (Current Version)

	Update SMC3000.COM for WFW and ODI stack.

___ Version 0.02

	Update IPXODI.COM v3.02
	Update NETX.EXE v3.32 (941122)
	Include E16ODIW.COM in OLD_ODI for older 3008.

S_Intern:
Latest files for the 3000 Series adapters


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                   8008.EXE LATEST Drivers
   	For SMC EtherNote ElitePort Parallel LAN Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 0.02       26 June 1996


This release information describes the version history of the
8008.EXE drivers.


SUPPORTED ADAPTERS

o  SMC EtherNote ElitePort LAN Ethernet adapters.


VERSION HISTORY 

___ Version 0.02 (Current Version)

	Update IPXODI.COM v3.02
	Update NETX.EXE v3.32 (941122)

S_Intern:
Latest drivers for the ElitePort adapter


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

		        8032.EXE LATEST Drivers
		For EtherPower 10/100 CardBus Family
	             of Network Adapters

		     VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1997 Standard Microsystems Corporation.
		    All rights reserved.

		Version 0.02		May 16, 1997

This release information describes the version history of the
8032.EXE drivers.

SUPPORTED ADAPTERS

o  EtherPower 10/100 CardBus Ethernet adapters (8032 board type)

VERSION HISTORY

___ Version 0.02 (Current Version)

	Update DOS ODI driver SMCPWR.COM v2.51.


S_Bezeichnung:
Drv.Set Elite 32 EISA Ethernet v0.02 -US

S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                    8033.EXE LATEST Drivers
   For Elite 32 (SMC8033 and SMC3032) EISA Ethernet LAN Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 0.02       26 June 1996


This release information describes the version history of the
8033.EXE drivers.


SUPPORTED ADAPTERS

o  Elite 32 Ethernet EISA adapters (8033 & 3032 board types)


VERSION HISTORY 

___ Version 0.02 (Current Version)

	Update Netware Server NW_4_0X.DOC file.
	Update Netware Server NW_3_11.DOC file.

___ Version 0.01

	Update SMC3OS2A.NIF file for OS/2.
	Update SMC3OS2B.NIF file for OS/2.

S_Intern:
Latest files for the Elite32 dual channel EISA adapters


S_Hinweise:
Microsoft Exchange Version 4.0 Service Pack 4, Windows NT (Alpha) Server update


S_Hinweise:
Microsoft Exchange Version 4.0 Service Pack 4, Windows NT (Intel) Server update.


S_Hinweise:
CONTENTS
  ________





                      2217 RELEASE 3 UPGRADE PACKAGE CONTENTS   1
                      Migrating to Release 3   1

                      2217 RELEASE 3 FUNCTIONAL CONTENTS   3
                        Multiport Model 2 Adapter   3
                        User-specified Password   3
                        SNA Enhancements   3

                      RCU VERSION 3.0 REQUIREMENTS   5

                      INSTALLING RCU VERSION 3.0   7
                      Installing RCU Version 3.0 in a New Workstation   8
                      Installing RCU Version 3.0 in an Existing RCU
                       Workstation   9

                      UPGRADING A 2217 TO RELEASE 3   11
                      Details of the Upgrade Process   11
                      Using MDM to Schedule an Upgrade   12
                      Important Notes   13

                      CONVERTING STAND-ALONE CONFIGURATION FILES   15


S_Hinweise:
Microsoft Exchange Version 4.0 Service Pack 4, Windows 95 client update.


S_Hinweise:
Microsoft Exchange Version 4.0 Service Pack 4, Eforms Designer update.


S_Hinweise:
Microsoft Exchange Version 4.0 Service Pack 4, Windows NT (Alpha) client update.


S_Hinweise:
Microsoft Exchange Version 4.0 Service Pack 4, Windows NT (Intel) client update.


S_Hinweise:
Microsoft Exchange Version 4.0 Service Pack 4, SMS files.


S_Hinweise:
Microsoft Exchange Version 4.0 Service Pack 4, Windows 3.x client update.


S_Bezeichnung:
Patch f. Ethernet Microcode v3.52 Patch6 -US

S_Hinweise:
================================
Release 3.52 Patch 6 Change List
================================


This document lists the changes included in patch level 6 of the 8235
microcode version 3.52. Note that some of these fixes are at the hardware
driver level and so require a Clear and Download from Management Facility.

8235 Ethernet microcode 3.52 patch 6 [formatted for AutoIP download]
     updates base model 8235-0x2 to version 3.52 patch level 6
     [BEA352P6.ZIP | Version 3.52p6 | 3-10-97 | 667,840 bytes]


S_Bezeichnung:
Patch f. Token Ring Microcode v3.52 Patch6

S_Hinweise:
8235 Token Ring microcode 3.52 patch 6 [formatted for AutoIP download]
     updates base model 8235-0x1 to version 3.52 patch level 6
     [BTA352P6.ZIP | Version 3.52p6 | 3-10-97 | 574,014 bytes]


S_Hinweise:
DIALs for OS/2 version 4.03 patch 4 update (requires installed 4.0x client)
     Corrects various problems -- see READ.ME
     [403P4.EXE | Version 4.03p4 | 2-24-97 | 348,810 bytes]


S_Bezeichnung:
Patch f. 8235-0x2 Ethernet Microcode Lev7

S_Hinweise:
8235 Ethernet microcode 4.02 patch 7 [formatted for BOOTP download]
     updates base model 8235-0x2 to patch level 7
     [BEB402P7.ZIP | Version 4.02p7 | 3-10-97 | 747,185 bytes]


S_Bezeichnung:
Patch f. 8235-0x1 Token Ring Microc. Lev7

S_Hinweise:
8235 Token Ring microcode 4.02 patch 7 [formatted for BOOTP download]
     updates base model 8235-0x1 to patch level 7
     [BTB402P7.ZIP | Version 4.02p7 | 3-10-97 | 643,549 bytes]


S_Hinweise:
Management Facility for Ethernet (1 of 9) [must have 2M in base model 8235]
     Order 4.5 upgrade kit if need to use ISDN BRI, for 8235 base model PROM update
     [823EMFE1.EXE | Version 4.53 | 3-10-97 | 1,305,840 bytes]


S_Hinweise:
Management Facility for Token Ring (1 of 9) [must have 2M in base model 8235]
     Order 4.5 upgrade kit if need to use ISDN BRI, for 8235 base model PROM update
     [823EMFT1.EXE | Version 4.53 | 3-10-97 | 1,305,842 bytes]


S_Bezeichnung:
OS/2 Utilities for NetWare v3.12 and v4.10

S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 3.12
NetWare 4.02
NetWare Client for OS/2 2.11
NetWare 4.1
NetWare Client for OS/2 2.12

ABSTRACT:

  OS2U1.EXE Supercedes OS2UTP.EXE
 This file contains updated OS/2 utilities for NetWare v3.12, NetWare v4.02 and
 NetWare v4.10 as 20 September 1995.
 The updated utilites are to be used with NetWare Client for OS/2 v2.1x.
 Also included is a OS/2 PM version of Rconsole.
 These utilities have not been submitted to Novell system test.


S_Hinweise:
DIALs for Windows (1 of 3)

     [823EDIW1.EXE | Version 4.52 | 3-10-97 | 1,188,015 bytes]


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
OS/2 NetWare Client - OS/2 2.12
OS/2 NetWare Client IW OS/2 2.12

ABSTRACT:

This is the new Netware Client for OS/2 v2.12 that is currently shipping in
NetWare 4.11 and IntranetWare.  This client is enabled for the following
langauges: English, Deutsch, Espanol, Francais, Italiano, Portugue.  This is
the network install version of this client.


S_Bezeichnung:
Netware File Access & MacIPX Ethernet Updates

S_Hinweise:
ISSUE: 

When a user selects the Collect for Output in QuarkExpress v3.32, the following error is received:

 "File is locked [-54]"

The Collect for Output attempts to gather all of the linked graphics and
prompts the user for a location to store all the files. If they choose the 
Mac hard drive or the network drive the above error occurs when any of the files are stored on the file server.

The Macintosh workstation is logged in to the server via IPX through the NetWare Client for Mac OS 5.11 client.

MacIPX Ethernet:

MacIPX Ethernet test version. It now always uses OT calls if the mac is a pci-based mac.

Known Issues:

1. Occassionally, MacIPX doesn't find a network and sets the network address to 0. In this case you can go to the MacIPX control panel and select Appletalk, and then select Ethernet again. Or you can re-boot. 

2. When 2 cards are installed, it seems to work ok on startup, but in the MacIPX control panel when switching to the other card, sometimes the system will crash.

Installation Instructions:

Replace current NFA in Macintosh System Folder. Copy the MacIPX into the System Folder. 
------------------------------------------------------------------------
File Contents



Self-Extracting File Name:  MCLUPD.BIN

Files Included     Size     Date      Time   Version   Checksum

\
    MCLUPD.BIN     162688     04-14-97       1:23p   





------------------------------------------------------------------------
Installation Instructions 

Update the NFA & MacIPX Ethernet in the Macintosh Extentions folder within the System Folder.


S_Hinweise:
SQL Server 6.5 Service Pack 2 . U. S. Service Pack 2 for Microsoft SQL Server v6.5 (for Alpha-based computers).


S_Hinweise:
SQL Server 6.5 Service Pack 2 . U. S. Service Pack 2 for Microsoft SQL Server v6.5 (for Intel-based computers).


S_Hinweise:
Internet Mail Service for Windows 95 Release/Update. - US.This component adds POP3 client mail services to the Windows 95 Microsoft Exchange client.


S_Hinweise:
Internet Mail Service for Windows 95 Release/Update. - D.This component adds POP3 client mail services to the Windows 95 Microsoft Exchange client.


S_Hinweise:
DIALs for OS/2 version 4.52 patch 1 update (requires installed 4.52 client)
Corrects various problems -- see 452P1.TXT
[452P1.EXE | Version 4.52p1 | 3-21-97 | 64,460 bytes]


S_Hinweise:
DIALOUT for Windows 95 (1 of 1)

[823EDO91.EXE | Version 4.5 | 3-10-97 | 1,177,502 bytes]


S_Hinweise:
DIALOUT for Windows NT (1 of 1)

[823EDON1.EXE | Version 4.5 | 3-10-97 | 1,181,560 bytes]


S_Hinweise:
DIALOUT for Windows (1 of 1)

[823EDOW1.EXE | Version 4.5 | 3-10-97 | 739,817 bytes]


S_Hinweise:
LAN Connect for Windows (1 of 1)

[823ELCW1.EXE | Version 4.5 | 3-10-97 | 285,710 bytes]


S_Hinweise:
Security Pack for Windows 95 (1 of 1)

[823ESP91.EXE | Version 1.30 | 3-10-97 | 137,215 bytes]


S_Hinweise:
Microcode update for base ethernet 8235s with adapters (8235-012 & 8235-032)
Corrects potential problem using Download To Modules command
[CSD454E.EXE | Version 4.54 | 3-12-97 | 1,128,373 bytes]


S_Hinweise:
Microcode update for base token ring 8235s with adapters (8235-011 & 8235-031)
Corrects potential problem using Download To Modules command
[CSD454T.EXE | Version 4.54 | 3-12-97 | 965,317 bytes]


S_Hinweise:
Patch 453p2 for the 8235-I40 Ethernet
Corrects issues using Dialout/in support
[IE453P2.ZIP |Version 4.53 | 4-14-97 | 2,530,038 bytes]


S_Bezeichnung:
Patch f. 8235-I40 Token Ring v.453p2 - US

S_Hinweise:
Patch 453p2 for the 8235-I40 TOKEN RING
Corrects issues using Dialout/in support
[IT453P2.ZIP |Version 4.53 | 4-14-97 | 2,370,075 bytes]


S_Hinweise:
AVS code version 1.0 (service level 24)
Disk 1 of 5
[AVS00241.EXE | Version 1.0 (service level 24) | 4-25-97 | 1,310,518 bytes]


S_Hinweise:
AVS Tools version 1.0 (service level 24)

     [AVS0024L.ZIP | Version 1.0 (service level 24) | 4-25-97 | 6,737,821 bytes]


S_Hinweise:
ATM TW25 ISA WinNT 3.51-4.0 Multi-LEC/CIP
     (Forum-Compliant)
     [AT25NT.EXE | Version 2.1 | 05-26-97 | 462,855 bytes]


S_Hinweise:
ATM TW25 ISA Win95 LEC/CIP Driver
     (Forum-Compliant)
     [ATI25WCI.EXE | Version 1.2 | 01-27-97 | 361,735 bytes]


S_Hinweise:
ATM TW25 ISA OS/2 LEC/CIP Driver
     (Forum-Compliant)
     [AT25OCI.EXE | Version 2.03 | 05-26-97 | 455,414 bytes]


S_Hinweise:
ATM TW25 ISA DOS/Win LEC+ATMAID
     (Forum-Compliant)
     [ATI25C.EXE | Version 2.20 | 11-16-96 | 921,160 bytes]


S_Hinweise:
ATM TW25 ISA OS/2, NT, Win95 ATMAID
     (Forum-Compliant)
     [ATI25AID.EXE | Version 1.2 | 09-14-96 | 389,638 bytes]


S_Hinweise:
ATM TW25 PCI WinNT 3.51-4.0 Multi-LEC/CIP
     (Forum-Compliant)
     [AT25NT.EXE | Version 2.1 | 05-26-97 | 462,855 bytes]


S_Hinweise:
ATM TW25 PCI OS/2 LEC/CIP Driver
     (Forum-Compliant)
     [AT25OCI.EXE | Version 2.03 | 05-26-97 | 455,414 bytes]


S_Hinweise:
ATM TW25 PCI OS/2, WinNT, Win95 ATMAID
     (Forum-Compliant)
     [ATP25AID.EXE | Version 1.20 | 12-07-96 | 377,221 bytes]


S_Hinweise:
ATM TW25 PCI DOS/Win LEC+ATMAID
     (Forum-Compliant)
     [ATP25C.EXE | Version 2.20 | 12-07-96 | 914,668 bytes]


S_Hinweise:
ATM TW25 PCI Win95 LEC/CIP Driver
     (Forum-Compliant)
     [ATP25WCI.EXE | Version 1.2 | 01-27-97 | 364,705 bytes]


S_Hinweise:
ATM IP155 PCI WinNT TR/ENET LE Diskette
     Forum-Compliant
     [ATP155NT.ZIP | Version ID1 | 2-07-97 | 709,230 bytes]


S_Hinweise:
ATM IP155 PCI Netware TR/ENET LE Diskette
     Forum-Compliant
     [ATP155NW.EXE | Version NW115 | 02-23-97 | 531,359 bytes]


S_Hinweise:
ATM 8281 Bridge Configuration Utility (Configurator) Diskette
     ATM Forum Compliance - For stand-alone bridge only
     [8281CFC.EXE | Version 2.2 | 1-13-97 | 1,000,021 bytes]


S_Hinweise:
ATM 8281 Bridge Operational Code and MIB Diskette
     ATM Forum Compliance - For stand-alone bridge only
     [8281OFC.EXE | Version 2.3 | 3-16-97 | 696,805 bytes]


S_Hinweise:
8229 Operational Software Diskette

     [8229V22.EXE | Version 2.2 | 4-21-97 | 1,097,967 bytes]


S_Hinweise:
PCI Adapter WinNT 3.51 Device Driver Diskette v1.0

     [WACPCNT1.ZIP | Version 1.0 | 02-03-97 | 388,939 bytes]


S_Bezeichnung:
Drv. PCI Link Device & Diags v.1.0 (NT3) - US

S_Hinweise:
PCI Adapter WinNT 3.51 Link Device Driver/Diags. Diskette v1.0

     [WACPCNT2.ZIP | Version 1.0 | 02-03-97 | 903,605 bytes


S_Hinweise:
PCI Adapter OS/2 Device Driver Diskette
     (Frame Relay, X25 and SDLC Support)
     [WACPCOS2.ZIP | Version 1.30 | 05-19-97 | 506,829 bytes]


S_Hinweise:
SQL Server 6.0 Service Pack 3 . U.S. Service Pack 3 for Microsoft SQL Server v6.0 (SP3 executable for Intel).


S_Bezeichnung:
IE 4.0 Preview Shellint. (NT4, WIN95) -D

S_Hinweise:
IE 4.0 für Windows 95 & Windows NT 4.0. Vorschauversion Internet Explorer 4.0 mit Shellintegration.


S_Hinweise:
IE 4.0 für Windows 95 & Windows NT 4.0. Vorschauversion Internet Explorer 4.0 ohne Shellintegration


S_Hinweise:
.                XIRCOM CREDITCARD ETHERNET+MODEM 28.8
.                      AND CREDITCARD MODEM 28.8
.                          FIRMWARE UPGRADE
.                     Release 4.32 (International)
.                         February 13, 1997
=======================================================================

This release contains the following:
   - XFLASH Flash ROM upgrade utility
   - CEM28 and CM28 Firmware Upgrades in a .PAK format.  
   - This firmware is not intended for use with U.S. and Canadian
     versions of the CEM28 and CM28. 

CONTENTS
========
   1) Upgrade Instructions
   2) Release Notes
   3) Xircom Technical Support


1) UPGRADE INSTRUCTIONS
   ==================== 
   NOTE: 
   XFLASH must run to completion without interruption. It is recommended
   that AC power be supplied to your laptop to ensure that continuous
   power is available.

1. Copy XFLASH.EXE and the PAK file(s) to a new directory on your hard
   drive.

2. Power off the computer.

3. Insert the adapter.

4. Power on the computer.  When the "Starting MS-DOS" message appears,
   hold down the SHIFT key.

   4a. WINDOWS '95: When starting Windows '95, hit SHIFT + F5.

5. Change to the directory on your hard drive you just created for
   XFLASH and the PAK files.  Type XFLASH and hit Enter.

6. The XFLASH program will update the adapter with the correct
   firmware. 

7. When the update is completed, exit XFLASH by pressing any key,
   and reboot the computer.


S_Hinweise:
IE 3.02 für NT4.0 (Intel) empfohlene Installation.


S_Hinweise:
8210 MSS Operational Code Version 1.1
     Latest microcode for the MSS
     [8210V11.ZIP | Version 1.1 | 04-14-97 | 5,734,722 bytes]


S_Hinweise:
.                XIRCOM CREDITCARD ETHERNET+MODEM 33.6
.                      AND CREDITCARD MODEM 33.6
.                          FIRMWARE UPGRADE
.                    Release 4.34 (International)
.                           March 31, 1997
=======================================================================

This release contains the following:
   - XFLASH Flash ROM upgrade utility
   - CEM33 and CM33 Firmware Upgrades in a .PAK format.  
   - This firmware is not intended for use with U.S. and Canadian
     versions of the CEM33 and CM33. 

CONTENTS
========
   1) Upgrade Instructions
   2) Release Notes
   3) Xircom Technical Support


1) UPGRADE INSTRUCTIONS
   ==================== 
   NOTE: 
   XFLASH must run to completion without interruption. It is recommended
   that AC power be supplied to your laptop to ensure that continuous
   power is available.

1. Copy XFLASH.EXE and the PAK file(s) to a new directory on your hard
   drive.

2. Power off the computer.

3. Insert the adapter.

4. Power on the computer.  When the "Starting MS-DOS" message appears,
   hold down the SHIFT key.

   4a. WINDOWS '95: When starting Windows '95, hit SHIFT + F5.


S_Hinweise:
IE 3.02 für Win95 empfohlene Installation


S_Hinweise:
8270-800 TR LAN Switch
     This release has support for ATM or SRB. You also need 827XA106.EXE for ATM U
     [8270312B.EXE . | Version 3.12B | 05-13-97 | 693,098 bytes]


S_Bezeichnung:
Support f. ATM UFC v.1.06 (see INFO) - US

S_Hinweise:
Support for ATM UFC for 8270-800 & 8272-108/216 TR LAN Switch
     and 8271-108/216 Ethernet LAN Switch
     [827XA106.EXE | Version 1.06 | 05-15-97 | 745,321 bytes]


S_Hinweise:
.                 XIRCOM CREDITCARD ETHERNET+MODEM 33.6
.                             Version 1.14
.                            March 13, 1997
=============================================================================

******************** Special Upgrade Instructions ***************************
*                         Windows '95 and NT                                *
*                                                                           *
*   If you already have a CEM33 installed under Windows '95 or NT, it is    *
*   important that you follow the upgrade instructions in Section 1.        *
*****************************************************************************

Thank you for purchasing the Xircom CreditCard Ethernet+Modem 33.6
Adapter.  Xircom has done everything to ensure that our adapter is
compatible with the widest range of notebook and laptop PCs possible.
As a company, we are equally committed to customer satisfaction and timely
response to the needs and concerns of our customers.

If you have compatibility issues related to your specific environment, or
require additional information, please refer to the CreditCard 
Ethernet+Modem User's Guide.

Remember to register your Xircom adapter to receive information about
future software upgrades and new products.


CONTENTS
========
   1) Windows '95, Windows '95 OSR2 and NT - Special Upgrade Instructions
   2) CreditCard Ethernet+Modem 33.6 Characteristics
   3) Release Notes/Known Limitations
   4) CXCFG.EXE Configuration Utility
   5) Special Configuration Notes
   6) Machine Specific Notes
   7) Modem
   8) Installation Program
   9) Xircom Technical Support

S_Intern:
CEM33.6 (US/CANADA and International models) Drivers


S_Hinweise:
Microsoft Internet Explorer 3.01 für Windows NT 4.0 (DEC Alpha) - US version


S_Hinweise:
8272 Model 108/216 and 8260 FC 6208/6308 TR LAN Switch
     This release has support for ATM or SRB. You also need 827XA106.EXE for ATM U
     [8272312A.EXE . | Version 3.12A | 05-13-97 | 678,499 bytes |]


S_Hinweise:
8272 Nways TR LAN Switch Model 108/216 and 8260 Hub FC 6208/6308
     Maintenance Release 2.33
     [8272V233.EXE | Version 2.33 | 04-28-97 | 545,386 bytes |]


S_Hinweise:
Support for ATM UFC for 8270-800 & 8272-108/216 TR LAN Switch
     and 8271-108/216 Ethernet LAN Switch
     [827XA106.EXE | Version 1.06 | 05-15-97 | 745,321 bytes |]


S_Hinweise:
IBM FDDI ISA Adapter Diskette 1 of 3

     [FDDII131.EXE | Version 1.3 | 2-06-97 | 401,295 bytes]


S_Hinweise:
IBM FDDI EISA Adapter Diskette 1 of 3

     [FDDIE131.EXE | Version 1.3 | 2-06-97 | 415,256 bytes]


S_Bezeichnung:
TOOL Modem Script Files  v2.00 (WIN95/NT) -US

S_Hinweise:
.                 XIRCOM MODEM PROGRAM INSTRUCTIONS
.                      AND MODEM SCRIPT FILES
.                           Release 2.00
.                          April 28, 1997
=======================================================================

This README.TXT file contains instructions for setting up your Xircom 
Modem (or Ethernet+Modem) with several popular communications programs.
This includes the following Xircom products: CM28, CM33, CEM2, CEM28,
CEM33.

CONTENTS
========
   1) Introduction
   2) America Online v. 3.0
   3) America Online v. 3.0 with Windows '95
   4) Banyan Vines 5.5 PC Dial-In
   5) CompuServe - WinCIM 2.5.1 with Internet Explorer 2.1
   6) CompuServe - WinCIM v.3.02 with Windows '95
   7) Laplink v.6.0
   8) Laplink v.6.0 with Windows '95
   9) Lotus CC:Mail Mobile v.2.22 with Windows
   10) Lotus CC:Mail Mobile v.2.22 with Windows '95
   11) Lotus Notes v.4.11a with Windows 
   12) Lotus Notes v.4.11a with Windows '95,NT4.0
   13) Microsoft Dial-Up Adapter Networking for Windows '95
   14) Microsoft Remote Access Server (RAS)
   15) Procomm Plus v.2.1
   16) Prodigy Internet v.1.1.6 with Windows '95
   17) Xircom Technical Support


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                             EZStart
                     For Ethernet LAN Adapters

                        RELEASE INFORMATION

     This software is licensed by SMC for use by its customers only.
          Copyright (c) 1994-1996 Standard Microsystems Corporation.
                           All rights reserved.

                     Version 6.12    8 August 1996


This diskette contains EZStart version 6.12. EZStart is a program
that is designed for SMC's new generation of SMC Ethernet adapters.


VERSION HISTORY
-- Version 6.12 (Current Version) --
   Cosmetic changes.
   Macro Recording problem fix.
    
-- Version 6.11 --
   Fixed problems with IRQ test failing and Loopback test failing on a
   live network.

-- Version 6.10 --
   Major Revision.  Supports 8020BT, BTM only.

-- Version 5.47 --
   Added support for the EtherPower 10/100 B.

-- Version 5.46 --
   Added support for running EZStart in Windows 95 safely.
   Added SMC Software License Agreement.


S_Hinweise:
DES-2205 Switch firmware upgrade 3.25 Please View the README.TXT file


S_Hinweise:
Confidence Test for 3000 Series adapters

S_Intern:
Confidence Test for 3000 Series adapters


S_Hinweise:
IBM LAN Client, Diskette 1 of 4

     [LANCLNT1.EXE | Version 2.1b | 3-16-97 | 768,545 bytes]


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

              Novell NetWare DOS ODI Workstation Driver
                  For 8016C/PC Ethernet LAN Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.

                   Version 0.12     16 August 1996


This release information describes the version history of the 
PCMCIA.EXE for EliteCard PCMCIA.

Note: These driver supports 8016 PCMCIA Ethernet Adapters only.


VERSION HISTORY

-- Version 0.12 (Current Release) --

	Add OS/2 NDIS driver SMC80PC.OS2 v1.00.

__ Version 0.11

	Update IPXODI.COM v3.02
	Update NETX.EXE v3.32 (941122)

___ Version 0.10 Initial Release
	Update WIN95 Driver SMC80PC.VXD v1.01 (3-29-96)

S_Intern:
Latest files for the 8016 PCMCIA adapters


S_Hinweise:
DE-950 firmware Revision 1.35 Please View the README.TXT file


S_Bezeichnung:
Client 32 f. Dos/Win (Net Inst.) v2.11 -D

S_Hinweise:
Client 32 f. Dos/Win (Net Inst.) v2.11 (Net Inst. German)


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                              SuperDisk 
 	 For  EtherPower 10/100 Card Bus
                          Network Adapters

This software is licensed by SMC for use by its customers only.
     Copyright (c) 1997 Standard Microsystems Corporation.
                     All rights reserved.

                 Version          20 April 1997


SUPERDISK CONTENTS

The following list describes some of the files contained on this
SuperDisk:

    File     	        Contents

   README.DOC       This file.


   NOVELL           Dos Odi driver .
   WORKSTATION

   WINDOWS for      Dos Odi Driver for Microsoft Windows for
   WORKGROUPS       Workgroups version 3.11.

   WINDOWS 95       Driver for Microsoft Windows 95.

   OSR2 USER	    NDIS 32 bit driver.
   INSTALL

   OSR2 FACTORY     NDIS 32 bit driver.

   ENABLER	    SMCCARDB.EXE


S_Bezeichnung:
Drv. CC ISDN Adapter Driver v1.21 (WIN31/DOS) -US

S_Hinweise:
.               XIRCOM CREDITCARD ISDN ADAPTER
.                   Release Version 1.21
.                     October 16, 1996

=============================================================================

Thank you for purchasing the Xircom CreditCard ISDN Adapter. Xircom has 
done everything to ensure that our adapter is compatible with the widest 
range of notebook and laptop PCs possible. As a company, we are equally 
committed to customer satisfaction and timely response to the needs and 
concerns of our customers.

If you have compatibility issues related to your specific environment, 
or require additional information, please refer to the CreditCard ISDN 
User's Guide.

Remember to register your Xircom adapter to receive information about 
future software upgrades and new products.


CONTENTS
========
   1) CreditCard ISDN Characteristics
   2) Release Notes/Known Limitations
   3) Special Configuration Notes
   4) Machine Specific Notes
   5) Xircom Technical Support


S_Hinweise:
FXSWITCH.EXE      1,254,100  10/3/96   3:01p
FlexSwitch Software Program for D-Link Switches


S_Hinweise:
Updated Windows 95 drivers for the Adaptec AHA-151x/152x, AIC  6260/6360/6365/6370, APA-14xx, AHA-154x, AHA-2940, AHA-3940, AHA-2920/A and AIC-78x0.


S_Intern:
Latest SuperDisk for the 9432 PCI adpater


S_Hinweise:
CardBus 10/100 Adapter Install Ver. 1.10

S_Intern:
CardBus 10/100 Adapter Install Ver. 1.10


S_Hinweise:
8224 Ethernet Stackable Hub Firmware Release

     [8224V131.EXE | Version 1.31 | 8-19-96 | 355,133 bytes]


S_Bezeichnung:
Client 32 DW French Language Modules v2.11

S_Hinweise:
Client 32 DW French Language Modules v2.11


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

              		ULTRA32C.EXE LATEST Driver
          For EtherCard Elite32 Ultra Ethernet LAN Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.

                   Version 0.02     27 June 1996


This release information describes the version history of the 
ULTRA32C.EXE driver.


VERSION HISTORY

-- Version 0.02 (Current Version) --

	Update IPXODI.COM v3.02
	Update NETX.EXE v3.32 (941122)
	
__ Version 01

	Initial Release

This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788.

S_Intern:
Latest files for the Ultra32 EISA adapters


S_Hinweise:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
                   Adaptec 7800 Family Manager Set v2.0 for OS/2
                   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Welcome to Adaptec 7800 Family Manager Set v2.0
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

The following information is available in this README file:

   o Supported Hardware
   o Changes From Prior Release
   o Installation Instructions
   o Known Issues
   o Additional Notes
   o Command Line Options
   o Diskette Contents
   o Contacting Adaptec



=-=-=-=-=-=-=-=-=-=
Supported Hardware
=-=-=-=-=-=-=-=-=-=

The following Adaptec SCSI Host Adapters are supported:

   Adaptec Host Adapter   Description
   --------------------   -----------
   AHA-2910               PCI-to-Fast SCSI (non-bootable)
   AHA-2930               PCI-to-Fast SCSI
   AHA-2940               PCI-to-Fast SCSI
   AHA-2940W              PCI-to-Fast and Wide Single-ended SCSI
   AHA-2940AU             PCI-to-Ultra Single-ended SCSI
   AHA-2940U              PCI-to-Ultra Single-ended SCSI
   AHA-2940UW             PCI-to-Ultra Wide Single-ended SCSI
   AHA-2944W              PCI-to-Fast and Wide Differential SCSI
   AHA-2944UW             PCI-to-Ultra Wide Differential SCSI

   AHA-3940               MultiChannel PCI-to-Fast SCSI
   AHA-3940W              MultiChannel PCI-to-Fast and Wide SCSI
   AHA-3940U              MultiChannel PCI-to-Ultra SCSI
   AHA-3940UW             MultiChannel PCI-to-Ultra Wide SCSI
   AHA-3940UWD            MultiChannel PCI-to-Ultra Wide SCSI with dual
                          external connectors
   AHA-3944UWD            MultiChannel PCI-to-Ultra Wide Differential SCSI
                          with dual external connectors
   AHA-3940AU             MultiChannel PCI-to-Ultra SCSI
   AHA-3940AUW            MultiChannel PCI-to-Ultra Wide SCSI
   AHA-3940AUWD           MultiChannel PCI-to-Ultra Wide SCSI with dual
                          external connectors
   AHA-3944AUWD           MultiChannel PCI-to-Ultra Wide Differential SCSI
                          with dual external connectors

   AHA-4944W              Quad Channel PCI-to-Fast and Wide Differential SCSI

   AIC-7850               Single-chip PCI-to-Fast SCSI
   AIC-7855               Single-chip PCI-to-Fast SCSI
   AIC-7856               Single-chip PCI-to-Fast SCSI
   AIC-7860               Single-chip PCI-to-Ultra SCSI
   AIC-7870               Single-chip PCI-to-Fast and Wide SCSI
   AIC-7880               Single-chip PCI-to-Ultra Wide SCSI
   AIC-7895               Single-chip PCI-to-MultiChannel Ultra Wide SCSI


S_Bezeichnung:
Client 32 f. Dos/Win (Net Inst.) v2.11 -F

S_Hinweise:
Client 32 f. Dos/Win (Net Inst.) v2.11 French


S_Hinweise:
This version 5.33 is for user for the DES 3205T module installed only  !


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                   ARCNET.EXE LATEST Drivers
   	For SMC ARCNet Series ISA and MCA of Ethernet Network Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 0.03       10 September 1996


This release information describes the version history of the
ARCNET.EXE drivers.


SUPPORTED ADAPTERS

o  All SMC ARCNet  adapters.


VERSION HISTORY 

___ Version 0.03 (Current Version)

	Update Netware 4.1 Server driver SMCARC.LAN v2.02

___ Version 0.02

	Update IPXODI.COM v3.02
	Update NETX.EXE v3.32 (941122)

____ Version 01

	Initial Release


S_Hinweise:
IBM 8225 Model 003 Microcode Upgrade
     (Includes a ReadMe File)
     [8225R126.EXE | Version 1.26 | 05-12-97 | 238,904 bytes]


S_Hinweise:
This version 5.33 is for user for the FIBER-Module installed only  !


S_Hinweise:
IBM 8225 Model 002 Microcode Upgrade
     (Includes a ReadMe File)
     [8225S119.EXE | Version 1.19 | 05-12-97 | 212,876 bytes]


S_Bezeichnung:
Drv. AirSurferWireless LAN v2.51 (WIN95) -US

S_Hinweise:
XIRCOM CREDITCARD NETWAVE ADAPTER
                    Windows 95 Installation Disk
                        Release Version 2.51
                         November 24, 1996

=============================================================================

Thank you for purchasing the Xircom CreditCard Netwave Adapter. This
README.TXT file contains information about this release or information not
included in the User's Guide.

If you have compatibility issues related to your specific environment, or 
you have general questions, please contact Xircom Technical Support.  
Information on Xircom Technical Support is located at the end of this file.

Remember to register your Xircom adapter to receive information about 
future software upgrades and new products.


CONTENTS
========

   1) Description
   2) New Features 
   3) Requirements
   4) Installation Instructions
   5) Special Software Notes
   6) Machine Specific Notes
   7) Xircom Technical Support


S_Hinweise:
8230 version 1.1.3 code for Models 04A, and 04P
     Corrects problem on 8230-04X
     [UR46930.EXE | Version 1.1.3 | 12-23-96 | 457,094 bytes]


S_Hinweise:
This version is for users who have a 1-port TX
Module installed only. Version 5.33


S_Bezeichnung:
Client 32 f. Dos/Win (Net Inst.) v2.11 -I

S_Hinweise:
Client 32 f. Dos/Win (Net Inst.) v2.11 italian


S_Bezeichnung:
Flash Microcode f. AB1 & PB1(Bronze) v.1.12 - US

S_Hinweise:
8238 Token Ring Stackable Hub Flash Microcode
     Models AB1 and PB1 (Bronze)
     [38V112BR.EXE | Version 1.12 | 9-23-96 | 658,069 bytes]


S_Bezeichnung:
Flash Microcode f. AG1 & PG1(Gold) v.1.12 - US

S_Hinweise:
8238 Token Ring Stackable Hub Flash Microcode
     Models AG1 and PG1 (Gold)
     [38V112GD.EXE | Version 1.12 | 9-23-96 | 626,895 bytes]


S_Bezeichnung:
Drv. ATM Power 155 Series v0.01 (NT) -US

S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

		ATM155.EXE LATEST Drivers
	    SMC ATM (974x) LANE Family Network Adapters
	       
			VERSION INFORMATION

     This software is licensed by SMC for use by its customers only.
	  Copyright (c) 1996 Standard Microsystems Corporation.
			   All rights reserved.


		Version 0.01             10 January, 1997


This release information describes the version history of the 
ATM155.EXE drivers

SUPPORTED ADAPTERS

o  SMC ATM POWER 155 PCI Adapter (9741D, 9741F)
o  SMC ATM POWER 155 PCI Adapter (9746D, 9746F)
o  SMC ATM POWER 155 EISA Adapter (9742D, 9742F)
o  SMC ATM POWER 155 EISA Adapter (9747D, 9747F)

VERSION HISTORY


-- Version 0.01 (Current Version)

    Initial release.


S_Hinweise:
This version is for users who have a 2-port TX
Module installed only. Version 5.33


S_Bezeichnung:
Flash Microcode f. AS1 & PS1(Silver) v.1.12 - US

S_Hinweise:
8238 Token Ring Stackable Hub Flash Microcode
     Models AS1 and PS1 (Silver)
     [38V112SI.EXE | Version 1.12 | 9-23-96 | 627,107 bytes]


S_Bezeichnung:
Drv. AirSurfer Access Point v2.55 (DOS) -US

S_Hinweise:
XIRCOM NETWAVE ACCESS POINT FOR ETHERNET UPDATE DISK
                            Release Version 2.55
                               October 28, 1996

=============================================================================

Thank you for purchasing the Xircom Netwave Access Point for Ethernet
(model NWAP/E or NWAP/10BT).  This README.TXT file contains information
about this release and information not included in the User's Guide.

If you have compatibility issues related to your specific environment, or
general questions, please contact Xircom Technical Support.  Information
on Xircom Technical Support is located at the end of this file.

Remember to register your Netwave Access Point to receive information about 
future software upgrades and new products.


CONTENTS
========

   1) Description
   2) New Features 
   3) Requirements
   4) Installation Instructions
   5) Special Software Notes
   6) Xircom Technical Support


S_Hinweise:
ATM 8282 Concentrator Operational Code Version 10.1

     [8282V101.EXE | Version 10.1 | 10-15-96 | 470,622 bytes]


S_Bezeichnung:
Univ.Drv. Ethernet Adapters v3.05 (WIN95/NT) -US

S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

  Windows NT 3.51 and Windows 95 NDIS 3.1 (Miniport) Driver
                         For Ethernet LAN Adapters

                         RELEASE INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                               All rights reserved.

                   Version 3.05           17 September 1996


The NDIS driver is designed to work with Ethernet LAN Adapters. It
conforms to the Network Driver Interface Specification (NDIS) version
3.1 defined by Microsoft. The driver has been built and tested with
Windows NT version 3.51 and Windows 95.


VERSION HISTORY

--Version 3.05 (Current Version) --
   Added support for Windows NT 4.0.
   Improved performance. 

   Known Problem:
      This version of the driver is not supported in Windows NT on a
      dual processor machine with multiple cards that are in I/O
      Mapped mode (8416 default).  If you require support for this
      configuration, please use the driver v3.00 found in the
      compressed driver file and can be obtained via EZStart.  Please
      note that you will need to copy the Windows NT supporting
      files (located in the root of the SuperDisk) to the same
      directory as the driver to ensure proper installation.

S_Intern:
WIN95 Unattended Install for ISA adapters


S_Bezeichnung:
Client 32 for Win95 2.11 Disk Install -US

S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare Client32 Win95 2.11

ABSTRACT:

This (English) NetWare Client 32 for Windows 95 (v2.11) contains the diskette
installation version of the Windows 95 client currently shipping in
IntranetWare and NetWare v4.11. Instructions for obtaining network versions of
this client in English, French, Italian, German, Spanish and Portuguese are
included in the Issue section of this document.


S_Hinweise:
Full driver set for DFE-500TX PCI 10/100 adapters


S_Hinweise:
NETACCESS MULTIPORT MODEM CARD

                      RAS DRIVER Version 3.1  for NT 4.0
                      RAS DRIVER Version 2.16 for NT 3.51

                      May 13, 1997

========================================================================

Thank you for purchasing the Netaccess MultiPort Modem (MPM) Card.  
This README.TXT file provides information that is not included in the
MultiPort Modem Card Installation and Reference Guide.

This update contains the latest software for the MultiPort Modem, and
can be used with Netaccess MultiPort Modem Card models MPM-4 and MPM-8.

If you have installation or compatibility issues specific to your 
environment or if you have general questions, please contact 
Netaccess Technical Support. Information about how to contact 
Technical Support is located in the NETACCESS TECHNICAL SUPPORT 
section of this document.

CONTENTS
========

    1) Description
    2) New Features
    3) Requirements
    4) Compatibility Notes 
    5) Installation Instructions
    6) Known Problems
    7) Netaccess Technical Support


S_Hinweise:
NetWare Administrator - Automatic install of NWADMN95


S_Bezeichnung:
Client 32 for Win95 2.11 (Net Install) -F

S_Hinweise:
Client 32 for Win95 2.11 (Net Install) french


S_Bezeichnung:
BIOS MPM Firmware Update v4.26 (DOS) -US

S_Hinweise:
NETACCESS MULTIPORT MODEM CARD

                    Model MPM-4 28.8K
                    Version 4.26F10  [ 71CSX ]

                    Model MPM-4 33.6K
                    Version 4.26C10  [ 91CSX ]

                    Model MPM-8 28.8K
                    Version 4.26B10  [ 81CSX ]

                    Model MPM-8 33.6K
                    Version 4.26A10  [ 101CSX ]
                                        
                    Firmware Update 

                    February 26, 1997

========================================================================

Thank you for purchasing the Netaccess MultiPort Modem Card. 

This update contains the latest version of firmware for the MPM.

If you have compatibility issues specific to your environment, or if you
have general questions, please contact Netaccess Technical Support.
Information on how to contact Netaccess Technical Support is located in
the NETACCESS TECHNICAL SUPPORT section of this file.

CONTENTS
=========

   1) DESCRIPTION
   2) NEW FEATURES
   3) REQUIREMENTS
   4) INSTALLATION INSTRUCTIONS
   5) KNOWN PROBLEMS
   6) TROUBLESHOOTING
   7) NETACCESS TECHNICAL SUPPORT


S_Hinweise:
IBM EtherJet PC Card Device Drivers...(Diskette 1)
     This package contains the Device Drivers for the EtherJet PC Card
     [EJETPC1.EXE | Version 1.0 | 03-31-97 | 476,391 bytes |]


S_Bezeichnung:
Drv. MPM Firmware Update v4.26 (DOS) -INT

S_Hinweise:
NETACCESS MULTIPORT MODEM CARD

                    Model MPM-4 28.8K ( International )
                    Version 4.26X10  [ 72SX ]

                    Model MPM-4 33.6K ( International )
                    Version 4.26Y10  [ 92SX ]

                    Firmware Update 

                    February 26, 1997

========================================================================

Thank you for purchasing the Netaccess MultiPort Modem Card. 

This update contains the latest version of firmware for the MPM.

If you have compatibility issues specific to your environment, or if you
have general questions, please contact Netaccess Technical Support.
Information on how to contact Netaccess Technical Support is located in
the NETACCESS TECHNICAL SUPPORT section of this file.

CONTENTS
=========

   1) DESCRIPTION
   2) NEW FEATURES
   3) REQUIREMENTS
   4) INSTALLATION INSTRUCTIONS
   5) KNOWN PROBLEMS
   6) TROUBLESHOOTING
   7) NETACCESS TECHNICAL SUPPORT


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                            SuperDisk 
  For EtherPower, EtherPower^2, and the EtherPower 10/100 Family
                       of PCI Network Cards

  This software is licensed by SMC for use by its customers only.
       Copyright (c) 1996 Standard Microsystems Corporation.
                        All rights reserved.

                 Version 1.1         28 August 1996



DISK INFORMATION

This SMC SuperDisk is designed to be used with SMC's EZStart Program,
which is on this SuperDisk.  EZStart configures and tests your 
network card, copies the files you need from this disk to your PC, and 
displays or prints appropriate instruction files that are located on 
this disk.


SYSTEM REQUIREMENTS

To use EZStart, your system must meet the following minimum 
requirements:

o  MS-DOS, PC-DOS, or Windows v3.11 or later 

o  To take advantage of EZStart's graphics features, a VGA or better
   monitor; however, EZStart can operate in text mode on any monitor

o  Approximately 380 K run-time memory to run EZStart.

o  A minimum amount of available hard disk space (typically 50 KB)
   for installing a single driver from the SuperDisk using EZStart


S_Hinweise:
PCMCIA 33.6/14.4 Data/Fax Modem Install/Drivers Diskette 1

     [336MOD01.EXE | Version 1.26 | 05-02-97 | 1,014,597 bytes]


S_Bezeichnung:
Client 32 for Win95 2.11 (Net Install) -I

S_Hinweise:
Client 32 for Win95 2.11 (Net Install) italian


S_Bezeichnung:
Installdisk Remote Unattended (WIN 95) - US

S_Hinweise:
Remote Unattended Install - Windows 95
     For the Auto 16/4 TR Credit Card Adapter
     [W95PCCRD.EXE | 02-25-97 | 755,480 bytes]


S_Bezeichnung:
Utilty ATM Diagnostic Software v2.10 (DOS) -US

S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                         Diagnostic Software Utility for DOS
                   For EISA and PCI ATM Power155 Adapters
		
                                RELEASE INFORMATION

                      Version   2.10                     April 25, 1996


VERSION HISTORY

-- Version 2.10 (Current Version) --
   Initial Release


This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788. 


SMC and Standard Microsystems are registered trademarks; and Power155 
and SuperDisk are trademarks of Standard Microsystems Corporation. 
Other products and company names are registered trademarks or trademarks 
of their respective holders.


S_Hinweise:
Remote Unattended Install - Windows NT
     For the Auto 16/4 TR Credit Card Adapter
     [NTPCCRD.EXE | 03-07-97 | 753,188 bytes]


S_Bezeichnung:
Client 32 for Win95 2.11 (Net Install) -D

S_Hinweise:
Zur Installation wechseln Sie in das Verzeichnis Deutsch und starten die
Datei SETUP.EXE !

             NETWARE CLIENT 32 FÜR WINDOWS 95

                    VERSIONSHINWEISE

                         27.08.96

INHALT

1.0 Untersttzung langer Dateinamen
2.0 Hilfetext ist primre Dokumentation
3.0 Aufrsten von einer Client 32-Betaversion
4.0 Kompatibilität
5.0 Installation
6.0 Allgemeines
7.0 Drucken
8.0 ODI- und NDIS-LAN-Treiber
9.0 Internationales
10.0 Problemlösungen
11.0 Marken
12.0 Haftungsausschluß


S_Bezeichnung:
Drv. Cirrus Logic PCMCIA Patch (DOS) -US

S_Hinweise:
.
.            XIRCOM 16-BIT REAL MODE DRIVERS WITH CIRRUS LOGIX
.               6729 OR 6730 PCMCIA CONTROLLER CHIPSET FIX
.
.                           January 16, 1997	
=============================================================================
FIX FOR LOADING 16-BIT REAL MODE DRIVERS ON COMPUTERS WITH THE CIRRUS 
LOGIC 6729 AND 6730 PCMCIA CONTROLLER CHIP SETS

Xircom has found the following drivers will work on most computers using 
the Cirrus Logic 6279 and 6730 PCMCIA controller chip set, including AST 
Ascentia J and P Series, Gateway Solo 2100 Series and Dell Latitude LM 
Series computers.

The files 6729_3E0.SYS (written by Cirrus Logic) and IRQ11OFF.COM (from 
AST) allow the 16-bit Real Mode drivers for Xircom PCMCIA products to 
load on computers with the Cirrus Logic 6729 and 6730 PCMCIA controller 
chip sets. 6729_3E0.SYS and/or IRQ11OFF.COM are required to free 
resources on the computer for the Xircom PCMCIA adapter to use.

S_Intern:
Cirrus Logic 6729 and 6730 PCMCIA controller chipset patch


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION
	    SMC ATM (974x) LANE Adapter WINDOWS NT 3.5/4.0 Drivers
	       
			RELEASE INFORMATION

     This software is licensed by SMC for use by its customers only.
	  Copyright (c) 1996 Standard Microsystems Corporation.
			   All rights reserved.


	Version   2.20                    Dec 12, 1996

VERSION HISTORY


-- Version 2.20 --
    Initial release.


S_Hinweise:
-----------------------------------
Novell IntranetWare Client for Windows NT Release Notes 2/14/97

These notes describe issues that have not been resolved for this release of the Novell* IntranetWare* Client* for Windows** NT** software.  Most of these 
issues will be resolved in future releases.

This release supports the following:

Intel**-based Windows NT Workstation 3.51 workstations, with Service Pack 4 
installed

Intel-based Windows NT Workstation 4.0 workstations

To install IntranetWare Client for Windows NT, you must have access to the 
Windows NT 3.51 or 4.0 CD, or be able to access Windows NT installation files 
over the network.

* Novell trademark.  ** Third-party trademark.  
For more information, see Trademarks.


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION
 
                     Netware 386 32 Bit ODI Driver 
             For EISA and PCI ATM Power155 Adapters

                       RELEASE INFORMATION

          Version 1.00                            March 19, 1996


VERSION HISTORY

-- Version 1.00 (Current Version) --
   Initial Release   


This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788. 


SMC and Standard Microsystems are registered trademarks; and Power155 
and SuperDisk are trademarks of Standard Microsystems Corporation. 
Other products and company names are registered trademarks or trademarks 
of their respective holders.

S_Intern:
Netware Server V. 1.00 (supports PVC only)


S_Bezeichnung:
Drv. AIO Driver for Novell v1.6 (NOV3/NOV4) -US

S_Hinweise:
NETACCESS MULTIPORT MODEM CARD

                      AIO DRIVER Version 1.6

                      December 12, 1996

=======================================================================

Thank you for purchasing the Netaccess MultiPort Modem (MPM) Card.  
This README.TXT file provides information that is not included in the
MultiPort Modem Card Installation and Reference Guide.

This update contains the latest software for the MultiPort Modem, and
can be used with Netaccess MultiPort Modem Card models MPM-4 and MPM-8.

If you have installation or compatibility issues specific to your 
environment or if you have general questions, please contact 
Netaccess Technical Support. Information about how to contact 
Technical Support is located in the NETACCESS TECHNICAL SUPPORT 
section of this document.

CONTENTS
========

    1) Description
    2) New Features
    3) Requirements
    4) Compatibility Notes 
    5) Installation Instructions
    6) Known Problems
    7) Netaccess Technical Support


S_Hinweise:
IBM Token-Ring Credit Card Win95 IBMTOK.VXD Update.
     (Corrects problem with Win95 Advance Power Management & DHCP)
     [TRCCW95.EXE | 10-18-96 | 88,392 bytes]


S_Hinweise:
Novell IntranetWare Client for Windows NT Release Notes 2/14/97

These notes describe issues that have not been resolved for this release of the Novell* IntranetWare* Client* for Windows** NT** software.  Most of these 
issues will be resolved in future releases.

This release supports the following:

Intel**-based Windows NT Workstation 3.51 workstations, with Service Pack 4 
installed

Intel-based Windows NT Workstation 4.0 workstations

To install IntranetWare Client for Windows NT, you must have access to the 
Windows NT 3.51 or 4.0 CD, or be able to access Windows NT installation files 
over the network.

* Novell trademark.  ** Third-party trademark.  
For more information, see Trademarks.


S_Hinweise:
IBM TR Credit Card WinNT IBMTKPCM.SYS Update
     Fix for Line Drops with WinNT 4.0 and TP560
     [TRCCNT4.EXE | Version x.xx | 11-25-96 | 48,054 bytes]


S_Hinweise:
Attached you will find a copy of a fix that will allow to select all of
the SMC adapters thru Network Client Administrator supplied from Microsoft 
Windows NT 4.0 Server.


	o	Go into the MSCLIENT\NETSETUP directory
	o	Rename WCNET.INF to WCNET.001
	o	Copy NTADMIN.EXE into above directory
	o	Execute NTADMIN.EXE in the above directory 

At this point you should be able to run the Network Client Admin
program and choose any of the SMC adapters.



Note : If you are creating a diskette for PCMCIA adapter you must 
install the approriate socket services for that laptop on the diskette.

History
=======
3/1/97	Creation
3/11/97 Changed 9332DST to use older NDIS2(v2.21) driver
3/14/97 Fixed 9432 text
	Correct selection for 9232 adapter

S_Intern:
NT Client Install (for most of SMC adapters)


S_Hinweise:
IBM TR Credit Card OS/2 IBMTOKCS.OS2 Driver Update
     New OS/2 Driver for Trap D/Line Drops on TP
     [TRCC2054.EXE | Version 2.054 | 11-25-96 | 32,678 bytes]


S_Hinweise:
ADM411NT.EXE contains the IntranetWare version of NWAdmin (NWADMN32.EXE) for Windows NT.


S_Hinweise:
IBM Token Ring Credit Card Adapter Install A Diskette.
     Contains the latest Drivers, LANAID and Install programs.
     [TRCC1.EXE | Version 3.06 | 02-24-97 | 977,369 bytes]


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                     PCI.EXE LATEST Drivers
   For EtherPower, EtherPower^2, and the EtherPower 10/100 Family
                       of PCI Network Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 0.44       25 April 1997


This release information describes the version history of the
PCI.EXE drivers.


SUPPORTED ADAPTERS

o  EtherPower Ethernet PCI adapters (8432 board types)
o  EtherPower^2 Dual-Channel PCI Ethernet adapters (8434 board types)
o  EtherPower 10/100 Fast Ethernet PCI adapters (9332 board types)
o  EtherPower 10/100 Fast Ethernet PCI adapters (9334 board types)


VERSION HISTORY 

___ Version 0.44 (Current Version)

	Add older SMCPWR.OS2 v2.11.

___ Version 0.43

	Update LSL.COM v2.20.
	Update SMCPWR.COM v2.43.
	Update IPXODI.COM v3.03.
	Update VLM.EXE v1.21.
	Add 9332DST directory for older NDIS driver (SMCPWR.DOS v2.11).

S_Intern:
Latest files for the PCI Series Adapters


S_Bezeichnung:
Drv. Multichannel ISDN Streams (NT3) -US

S_Hinweise:
This distribution contains the BETA release of the Xircom 
Windows NT(tm) 3.51 Driver for Instant ISDN(tm).  

The Xircom MultiChannel ISDN Streams Driver (XMCISD) is a
streams driver that runs on the 3.51 version of NT and is
subject to the limitations of the NT streams implementation. 

Use of this driver involves several steps:
--installing the release source tree on a NT build system;
--installing the appropriate cards into the target NT system;
--using driver parameter information to configure board switches;
--building checked or free version of driver and applications;
--installing driver on target NT system;
--starting driver on target NT system; and
--configuring board using supplied applications.

S_Intern:
DRV-WINNT351 - STREAMS Driver for WinNT 3.51


S_Hinweise:
IBM Token Ring Credit Card LAN Client A Diskette.
     Disk 1 of the LAN Client program.
     [TRCC3.EXE | Version x.xx | 12-14-96 | 798,583 bytes]


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
OS/2 NetWare Client - OS/2 2.12
OS/2 NetWare Client IW OS/2 2.12

ABSTRACT:

This is the new Netware Client for OS/2 v2.12 that is currently shipping in
NetWare 4.11 and IntranetWare.   This is the diskette install version,  enabled
for the following langauges: English, Deutsch, Espanol, Francais, Italiano,
Portugue.


S_Hinweise:
Release Notes for Beta disk for PRI runtime software.
			06/11/96


NOTES:


Note 1.	To install the PRI runtime software and run the demo program:

	a.  Install a PRI board in two PC's running OS2 2.1.
	    Set the switch settings to match the i/o address specified
	    in the load.cmd command file.  Make certain there are no
	    interrupt or address conflicts between the PRI card and 
	    any other cards in your system.

	b.  Connect a a cable with a TX, RX crossover between trunk
	    B of each card.  (Trunk B is the top connector).

	c.  Create a directory C:\PRI on each machine.
	    Copy all files from this disk into that directory.

	d.  Install the PRI.SYS device driver in each OS2 machine
	    by placing the follwing line in the config.sys file:
	    DEVICE=C:\PRI\PRI.SYS
            No command line arguments are requred since the loadpri.exe
	    utility will configure the driver.

S_Intern:
Product: DRVOS2 - Streams Driver for OS/2


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

                     PCIMS.EXE LATEST Drivers
   For EtherPower, EtherPower^2, and the EtherPower 10/100 Family
                       of PCI Network Adapters

                         VERSION INFORMATION

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1996 Standard Microsystems Corporation.
                         All rights reserved.

                    Version 0.02       30 January 1997


This release information describes the version history of the
PCIMS.EXE drivers.


SUPPORTED ADAPTERS

o  EtherPower Ethernet PCI adapters (8432 board types)
o  EtherPower^2 Dual-Channel PCI Ethernet adapters (8434 board types)
o  EtherPower 10/100 Fast Ethernet PCI adapters (9332 board types)
o  EtherPower 10/100 Fast Ethernet PCI adapters (9334 board types)


VERSION HISTORY 

___ Version 0.02 (Current Version)

	Update OEMSETUP.INF file for WFW 3.11.

___ Version 0.01

	Incorporate Windows drivers and new installation procedures.

S_Intern:
Latest windows friendly diskette for PCI cards


S_Hinweise:
EtherJet ISA Adapter Device Driver Diskette
     Diskette 1 of 2
     [ETIJ01.EXE | Version 1.8 | 05-19-97 | 438,892 bytes]


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 4.1
NetWare for Macintosh 4.10
NetWare Client for Mac OS 5.11

ABSTRACT:

This file contains the Netware Client for MacOS version 5.11.

 Note: This version of the client does not support IPX running on PCI lan
cards.


S_Bezeichnung:
Install EtherJet Remote v.1.0 (NT x) - US

S_Hinweise:
EtherJet Remote Unattended Install WNT 3.51-4.0
     (Sample Book Disk)
     [EJRUINT.EXE | Version 1.0 | 05-19-97 | 827,621 bytes]


S_Hinweise:
100/10 Ethernet ISA Adapter Install Diskette 1

     [ETI1001.EXE | Ver 2.1 | 04-13-97 | 544,992 bytes]


S_Hinweise:
Ethernet PCI Adapter Driver Diskette
     Diskette 1 of 2
     [ETPLAN01.EXE | Version 3.11 | 05-12-97 | 629,588 bytes]


S_Bezeichnung:
Utility Diagnostic Ethernet 100/10 v.2.3 - US

S_Hinweise:
Ethernet 100/10 PCI Adapter Driver/Diagnostics Diskette

     [ETP100.EXE | Version 2.3 | 1-10-97 | 882,091 bytes]


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare Client for Dos/MS Windows 1.21

ABSTRACT:

This is 1 of 6 files required to obtain the complete NetWare Client for Dos/MS
Windows v1.21.(VLMs) This product currently ships with IntranetWare and NetWare
v4.11. This version (v1.21) replaces all previous versions of the VLMs. These
files may be used to create a client installation area on a NetWare Server or a
local hard drive. Multiple Language support is included. (See ISSUES) The
following files are required in order to download the complete client:
VLM121_1.EXE, VLM121_2.EXE, VLM121_3.EXE, VLM121_4.EXE, VLM121_5.EXE,
VLM121_6.EXE.


S_Hinweise:
NETACCESS MULTIPORT MODEM CARD

                      Diagnostic and Support Software

                      December 12, 1996

========================================================================

Thank you for purchasing the Netaccess MultiPort Modem (MPM) Card.  
This README.TXT file provides information that is not included in the
MultiPort Modem Card Installation and Reference Guide.

This update contains the latest software for the MultiPort Modem, and
can be used with Netaccess MultiPort Modem Card models MPM-4 and MPM-8.

If you have installation or compatibility issues specific to your 
environment or if you have general questions, please contact 
Netaccess Technical Support. Information about how to contact 
Technical Support is located in the NETACCESS TECHNICAL SUPPORT 
section of this document.

CONTENTS
========

    1) Description
    2) New Features
    3) Requirements
    4) Compatibility Notes 
    5) Special Notes
    6) Installation Instructions
    7) Known Problems
    8) Netaccess Technical Support

S_Intern:
COM Port Mode configuration files and diagnostic utilities


S_Hinweise:
STANDARD MICROSYSTEMS CORPORATION

            Microsoft Windows NT v3.51/v4.0 and Windows 95
                       NDIS v3.1 Driver (Miniport)
     For EtherPower, EtherPower^2, and the EtherPower 10/100 Family
                           of PCI Network Cards

     This software is licensed by SMC for use by its customers only.
         Copyright (c) 1996 Standard Microsystems Corporation.
                         All rights reserved.

                 Version 4.14          26 November 1996


The NDIS driver is designed to work with Ethernet LAN Network cards. It
conforms to the Network Driver Interface Specification (NDIS) v3.1 
defined by Microsoft.
   

VERSION HISTORY
-- Version 4.14 (Current Version) --
   Fixed a problem with Full duplex which caused failures on the test
      suite and bad performance.

-- Version 4.13 --
   Added full NWAY support for certain cards.
   Added support for the Unlimited Burst Length option.

-- Version 4.12 --
   Fixed a problem with the 9332BVT card.

-- Version 4.11 --

S_Intern:
Unattended install for WIN95 and PCI adapters


S_Bezeichnung:
Utility Diagnostic 16/4 II Adapt. v.3.2 - US

S_Hinweise:
16/4 II Adapter Diagnostics/Drivers Diskette

     [TRI1642.EXE | Version 3.2 | 01-20-97 | 652,206 bytes]


S_Bezeichnung:
Utility Diagnostic Auto Wake 16/4 Turbo v.2.21

S_Hinweise:
Auto Wake 16/4 Turbo ISA LANAID & Diagnostics
     Diskette 1 of 4
     [TRI164T1.EXE | Version 2.21 | 10-14-96 | 1,057,593 bytes]


S_Hinweise:
Overview
The purpose of this file is to allow for the automatic installation of 
Windows NT4.0 Workstation or Server with the SMC PCI family adapters 
and the Ultra series adapters. 

PCI Familiy includes
EtherPower 10/100 (SMC9332BDT, SMC9332BVT, SMC9332DST)
EtherPower (SMC8432BT, SMC8432T, SMC8432e)
EtherPower^2 (SMC8434)

Ultra Family Include
EtherEZ Adatpers (8416)	
Ultra Series Adapters (8216)
Elite Series Adapters (80x3)

This software distribution has unattended files and sample scripts
for both WindowsNT 4.0 Server and Workstation. The specific files 
required for each operating system are contained in the subdirectories.

The sample Unattended scripts are:

WindowsNT 4.0 Server	  =	/NT40SERV/NT40SERV.TXT
WindowsNT 4.0 Workstation =	/NT40WORK/NT40WORK.TXT

The WindowsNT 4.0 Workstation script has been designed to install NT with 
the following options: (your site could have different requirements)
·	FileSystem 	  ===>	FAT
·	Workgroup  	  ===>	WORKGROUP, ie not into a DOMAIN
·	NT root directory ===>	\WINNT40
·	Networking protocols used ===> TCP/IP w/DHCP enabled

S_Intern:
NT Unattended Install for adapters in NT 4.0


S_Bezeichnung:
Utility Diagnostic Turbo 16/4 v.2.21 - US

S_Hinweise:
IBM Turbo 16/4 ISA LANAID & Diagnostics Diskette
     Disk 1 of 4
     [TRI164T1.EXE | Version 2.21 | 10-12-96 | 1,057,593 bytes]


S_Bezeichnung:
TOOL COM Port Monitoring Program (WIN) -US

S_Hinweise:
.
.                     XIRCOM COM PORT MONITOR PROGRAM
.                          Release Version 1.02
.                           September 18, 1995

=============================================================================

The Xircom COM Port Monitor Program is provided for use with the following 
Xircom products: CreditCard Ethernet+Modem II, CreditCard Ethernet+Modem 
28.8, and the CreditCard Modem 28.8 adapters.

The Xircom COM Port Monitor is a Windows-based simulation LED program for the
Xircom CreditCard Modem product line. The program simulates the status LEDs 
traditionally found on external modems.


S_Bezeichnung:
Install 16/4 Turbo Remote v.1.0 (WIN 95) - US

S_Hinweise:
16/4 ISA Turbo Win95 Remote Unattended Install
     See README.1ST File on Diskette.
     [W95_TURB.EXE | Version 1.0 | 9-17-96 | 686,011 bytes]


S_Bezeichnung:
Install 16/4 Turbo Remote v.1.0 (NT) - US

S_Hinweise:
16/4 ISA Turbo WinNT Remote Unattended Install
     See README.1ST File on Diskette.
     [NT_TURB.EXE | Version 1.0 | 12-16-96 | 631,660 bytes]


S_Hinweise:
16/4 ISA Turbo Modified OEMSETUP.INF File
     For WinNT 4.0 Install Problem per MS Article Q156606.
     [OEMSETNT.EXE | Version x.x | 12-16-96 | 33,858 bytes]


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  CFGRD3.EXE - NetWare Config Reader Ver 2.1
README FOR:  CFGRD3.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 3.12
NetWare 4.1
NetWare 4.11

ABSTRACT:

The Config Reader - Internet Edition! (version 2.1) is a win 95 client-based
utility that analyzes the config.txt file produced by the CONFIG.NLM (available
from the TABND2.EXE file). 
 This latest version can now:
 - Download a Novell-controlled database via FTP
 - Print Suggestions
 - View the server's DOS config.sys & autoexec.bat files
 - Tell you what file to download if an NLM is "out-of-date"
 - Compare two servers' configs side-by-side
 - And...the "List index out of bounds" error is corrected


S_Hinweise:
Token-Ring Probe 2.96 Agent & Config System Firmware

S_Intern:
Token-Ring Probe 2.96 Agent & Config System Firmware


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  SMSUP6.EXE  readme and file description
README FOR:  SMSUP6.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 3.11
NetWare 3.12
NetWare 4.01
NetWare 4.02
NetWare 4.1
NLMs 4.11

ABSTRACT:

This download provides updated files used for SMS functions such as Sbackup or
NetWare Navigator.  These files are identical with those files tested and
released in NetWare 4.11.  Readmes are also included which deal with disaster
recovery strategies for NDS.  DSBACKER.NLM for NetWare v4.10 is also included.


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  Upgrade Activation Key Program
README FOR:  ACTKEY.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 3.12
NetWare 4.1
NetWare 4.11
SMP 4.11
SFT III 4.11
NetWare for OS/2

ABSTRACT:

All NetWare/IntranetWare upgrade products require that the installer/user
obtain an activation key to unlock the license diskette before performing an
upgrade of the product.


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  NAM41B.exe - MAC.NAM, OS2.NAM for NW 4.10
README FOR:  NAM41B.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 4.1
NetWare for Macintosh 4.10

ABSTRACT:

This file contains updated MAC and OS/2 name spaces for NetWare 4.10, as well
as a VREPAIR to resolve some of the possible issues.


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  NetWare 4.10 OS Patches
README FOR:  410PT7.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 4.1
NetWare for SAA Services Manager 3.0
Installation OS/2 2.11
Kernel/OS 4.1
Install DS 4.1

ABSTRACT:

This file contains the latest operating system patches for NetWare 4.10.
 Included with this release are all patches for all user-versions of NetWare
 4.10.  The patches included have system tested by Novell. Novell recommends
 loading ALL patches before contacting Novell for support. Features are the
 following:
 -New automated installation process for Native NetWare, NetWare
 for OS/2, NetWare SFTIII. 
 -LOADER.EXE has the calander fix for Year 2000.


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  NetWare 4.11 OS Patches
README FOR:  411PT1.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare for OS/2
NetWare 4.11
SMP 4.11
SFT III 4.11
IntranetWare

ABSTRACT:

This file contains the latest operating system patches for NetWare 4.11.
 Included with this release are all patches for all user-versions of NetWare
 4.11.  The patches included have system tested by Novell. Novell recommends
 loading ALL patches before contacting Novell for support. Features are the
 following:
 -New automated installation process for Native NetWare, NetWare
 for OS/2, NetWare SFTIII. 
 -LOADER.EXE has the calander fix for Year 2000.


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  ReadMe for NW4DFS.EXE
README FOR:  NW4DFS.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 4.1

ABSTRACT:

Released patch of the NetWare Direct File System.


S_Hinweise:
NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  41RTR4.EXE; NetWare 4.10 Protocol Update
README FOR:  41RTR4.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 4.1
NetWare SFT III 4.1
SFT III 4.1

ABSTRACT:

41RTR4.EXE corrects IPXRTR problems on NetWare 4.10 and NetWare 4.10 SFT III.


S_Hinweise:
PCI Token Ring LANAID and Diagnostics Diskette
     Diskette 1 of 5
     [TRP1641.EXE | Version 1.1 | 10-04-96 | 967,712 bytes]


S_Bezeichnung:
Install Remote Unattended v.1.0 (WIN 95) - US

S_Hinweise:
PCI Token Ring Win95 Remote Unattended Install

     [RUI_W95.EXE | Version 1.0 | 9-17-96 | 744,148 bytes]


S_Hinweise:
IBM PCI WNT Remote Unattended Install disk

     [RUI_NT.EXE | 03-17-97 | 756,681 bytes]


S_Hinweise:
PCI CID Install/Config. disk

     [CID_PCI.EXE | Version 1.0 | 02-28-97 | 79,133 bytes]


S_Hinweise:
Auto Lanstreamer PCI MS Remote Unattended Install

     [IBMRUI.EXE | 03-21-97 | 720,964 bytes]


S_Hinweise:
Auto Lanstreamer PCI Drivers Diskette

     [TRPALS1.EXE | Version 1.04 | 05-12-97 | 539,147 bytes]


S_Bezeichnung:
Utility Diagnostic Auto LanStreamer v.1.03 - US

S_Hinweise:
Auto LanStreamer PCI Diagnostic Diskette

     [TRPALS2.EXE | Version 1.03 | 03-31-97 | 321,783 bytes]


S_Bezeichnung:
Drv. Auto Lanstreamer CLIENT v.1.03 (NOV) - US

S_Hinweise:
Auto Lanstreamer PCI Netware Client Diskette

     [TRPALS3.EXE | Version 1.03 | 03-03-97 | 1,359,815 bytes]


S_Bezeichnung:
Drv. Auto Lanstreamer NDIS3 Device v.1.03 - US

S_Hinweise:
Auto Lanstreamer PCI NDIS3 Device Drivers
     Windows NT, WFWG, and Win95
     [TRPALS4.EXE | Version 1.03 | 12-07-96 | 357,614 bytes]


S_Bezeichnung:
Drv. Auto Lanstreamer LSP NDIS v.1.04 - US

S_Hinweise:
Auto Lanstreamer PCI LSP NDIS Diskette

     [TRPALS5.EXE | Version 1.04 | 07-02-96 | 315,058 bytes]


S_Hinweise:
========================================================================
Sportster ISDN 128K 5.1 Release Notes                          01-07-97
========================================================================

To more easily view this file you should maximize
this window and enable word wrap under the Edit Menu.


These release notes contain IMPORTANT information which may not have been 
included in your manuals at the time they were printed.


TABLE OF CONTENTS

1.0 Changes To This Release

This section lists changes made to the software for this release.

* Many new features have been added such as a dynamic bandwidth allocation algorithm, pre-RFC support for BACP and so forth. Please refer to the on-line help for further information.


S_Hinweise:
========================================================================
Sportster ISDN 128K 5.1 Release Notes                        March 10, 1997
========================================================================

To more easily view this file you should maximize
this window and enable word wrap under the Edit Menu.


These release notes contain IMPORTANT information which may not have been included in your manuals at the time they were printed.


 TABLE OF CONTENTS

 1.0 Known Issues
 2.0 Changes to this release
 3.0 Microsoft ISDN Configuration Wizard


1.0 Known Issues

1. If your PC has a Power Saver feature, you should disable it while running the Sportster 128K. Your system may become very unstable if the power saver is activated while the Sportster 128K drivers are running.

2. If the Dial-up Network (DUN) server is set and multilink is turned on the call statics will not work correctly. 

3. If the Dial-up Network server has received a call, the second b channel cannot be used to dial out.

S_Intern:
Sportster 128k drivers for Windows 95 version


S_Hinweise:
November 18, 1996

  Build level 8.250
  
  
  Supported CSD levels
  
  XR_3000 Warp for Windows
  XR_3001 Warp with WIN-OS/2
  XR_3002 Warp for Windows Manufacturing Refresh
  XR_3003 Warp with WIN-OS/2 Connect
  XR_3004 Warp for Windows Manufacturing Refresh Connect
  XR_3005 Warp Preload
  XR_3005 Warp with WIN-OS/2 Server
  
  
  OS/2 Fix Distribution
  Personal System Products
  Austin, Tx
  
  
  (c) Copyright International Business Machines Corporation, 1994, 1996.
  All rights Reserved.

  November 18, 1996 - Warp FixPak XR_W026


S_Hinweise:
February 21, 1997

  Build level 9.025
  
  
  This FixPak applies to:
  
  CSD Level:    XR_4000
  Component ID: 5639A6100
  Version:      4.00
  Type:         0C
  
  
  
  OS/2 Fix Distribution
  Personal System Products
  Austin, Tx
  
  
  (c) Copyright International Business Machines Corporation, 1994, 1996.
  All rights Reserved.

  February 21, 1997 - Warp 4 FixPak XR_M001



                February 21, 1997 - Warp 4 FixPak XR_M001


S_Hinweise:
To easily view this file on-screen, maximize the 
Notepad window and then, from the Edit menu, 
choose Word Wrap.

RELEASE NOTES - Sportster ISDN 128K Version 5.1
-----------------------------------------------

A Tools Guide is installed to the Sportster ISDN 128K Tools window.  The Tools Guide gives additional instructions for using the Line Monitor and Protocol Monitor tools.

S_Intern:
Sportster 128k drivers for Windows NT version


S_Hinweise:
==========================================================================
Sportster ISDN 128K 5.1 Release Notes                          01-07-97
==========================================================================

To more easily view this file you should maximize
this window and enable word wrap under the Edit Menu.


These release notes contain IMPORTANT information which may not have been included in your manuals at the time they were printed.


 TABLE OF CONTENTS

 1.0 Known Issues
 2.0 Changes to this release
 3.0 Microsoft ISDN Configuration Wizard


1.0 Known Issues

1. Event though the Dial-up server recognizes the Sportster and can monitor the line, incoming calls will not be connected.


2.0 Changes To This Release

This section lists changes made to the software for this release.

* Many new features have been added such as a dynamic bandwidth allocation algorithm, pre-RFC support for BACP and so forth. Please refer to the on-line help for further information.


3.0 Microsoft ISDN Configuration Wizard

The Microsoft ISDN Configuration Wizard allows you to configure more Switch Types than our supported by the Sportster. The Sportster supports only the National ISDN, 5ESS and Northern Telecom DMS 1100 options. As a convenience we read these values after the install. Any changes after this must be done in the Sportster Manager under Configuration Settings | Telephone Company.

S_Intern:
SP51_95.ZIP   Latest Sportster 128k drivers that include support for MS ISDN Accellerator 1.1 and OEM SR2 (The new OEM version of Win95), dynamic bandwidth allocation, etc.


S_Bezeichnung:
Drv. INF File Sportster Voice x2 (WIN95) -US

S_Hinweise:
Windows 95 INF file for Sportster Voice x2

S_Intern:
Windows 95 INF file for Sportster Voice x2


S_Bezeichnung:
Drv. INF File Sportster x2 56k (WIN95) -US

S_Hinweise:
Windows 95 INF file for Sportster x2 56k

S_Intern:
Windows 95 INF file for Sportster x2 56k


S_Intern:
USRIMX2.MDM - Courier I-modem Lotus Notes script


S_Hinweise:
44837  02-28-97  Windows 95 MDMUSRCR.INF for V.34+ Courier - place in \Windows\Inf directory and re-detect Courier V.Everything. Includes support for U.S. Robotics x2.

S_Intern:
MDMUSRCR.INF    44837  02-28-97  Windows 95 MDMUSRCR.INF for V.34+ Courier - place in \Windows\Inf directory and re-detect Courier V.Everything. Includes support for U.S. Robotics x2.


S_Hinweise:
381472  02-28-97  2/25/97
Flash ROM code for U.S. Robotics Courier V.Everything. For 20Mhz Model Only (Check ATI7). This is current production code. Includes Xmodem image file and  Documentation. For domestic

S_Intern:
USRXMD.ZIP     381472  02-28-97  2/25/97 Flash ROM code for                           U.S. Robotics Courier V.Everything. For 20Mhz Model Only (Check ATI7). This is current production code. Includes Xmodem image file and  Documentation. For domestic


S_Hinweise:
AccessBuilder Remote User 400 Only - OS Versions  05.02a  through to 05.03k


Product part number:		As Below.		
Update disk part number:  	on BBS for AB400...........	(Filename AB40503K.exe)


Note, This release is applicable to the following products.

AccessBuilder Remote User (ABRU) 400 - 3C450000 (S/T Interface)
(Sometimes called AB400)             - 3C460000 (U Interface - US, Canada, Japan)		

It details the changes in the AccessBuilder Remote User 400 Operating Software since Version 05.02a and includes the changes in Versions  -  05.02a through to 05.03k.


S_Hinweise:
Product Part Numbers:		As Below.
Latest Release Part Number:	000153.014

Update Disk Part Number:	on BBS (Filename AB50503f.exe).

AccessBuilder Remote Office(ABRO)	500	3C401000 / 005A	

This TRN covers the changes in Version 05.03f Operating Software (OS)
It is applicable to AccessBuilder Remote Office (ABRO) 500 units ONLY.


S_Hinweise:
Product Part Numbers:		As Below.
Latest Release Part Number:	000134.013
Update Disk Part Number:	on BBS (Filename ABR0503f.exe).
	
AccessBuilder Remote Office	600	3C400000 & 10	- 3C400005A and 15A	
(ABRO)				700	3C400020


S_Hinweise:
Product Part Numbers:	As Below.   
Update file name on BBS is ABR0503i.exe

AccessBuilder Remote Office(ABRO)	
(S / T Interface).	 (U Interface - US, Canada, Japan).	
ABRO 600	3C400000		- 3C40005 / 00015
ABRO 700	3C400020		
AB 7000 BRI Module			3C400080
AB 7000 PRI Module			3C400085


S_Bezeichnung:
Drv. v2.1 Agent for 3C1690x SWITCH 1000 -US

S_Hinweise:
========================================================================
            SUPERSTACK II SWITCH 1000 MANAGEMENT AGENT VERSION 2.10
========================================================================

This file contains the following sections:

A)	Details of your legal rights and obligations

B)	Information about this release of Management Agent Software.

C)	A list of new features supported by this release of Management
    	Agent Software and how to use them.


LEGAL RIGHTS

========================================================================
IMPORTANT: READ BEFORE INSTALLING OR USING THIS SOFTWARE
========================================================================
You should carefully read the following terms and the terms set forth in the 
NOTICES, especially those under the headings "No Warranty", "Limitation of 
Liability" and "US Government Legends", before using the software programs 
("Software") and any documentation you have obtained from 3Com. Installation or
use of the Software indicates that you accept such terms.


S_Bezeichnung:
Drv. v2.1 Agent for 3C1694x SWITCH 3000 -US

S_Hinweise:
========================================================================
     SUPERSTACK II SWITCH 3000 FX / TX 8 PORT MANAGEMENT AGENT VERSION 2.10
========================================================================

This file contains the following sections:

A)	Details of your legal rights and obligations

B)	Information about this release of Management Agent Software.

C)	A list of new features supported by this release of Management
    	Agent Software and how to use them.


LEGAL RIGHTS   
========================================================================
IMPORTANT: READ BEFORE INSTALLING OR USING THIS SOFTWARE
========================================================================
You should carefully read the following terms and the terms set forth in the 
NOTICES, especially those under the headings "No Warranty", "Limitation of 
Liability" and "US Government Legends", before using the software programs 
("Software") and any documentation you have obtained from 3Com. Installation or
use of the Software indicates that you accept such terms.


S_Bezeichnung:
Drv. v5.03f OCR 510,520,530 Software -US

S_Hinweise:
Product Part Numbers:		As Below.
Latest Release Part Number:	000184.009
Update Disk Part Number:	on BBS (Filename OCR0503f.exe).
	
OfficeConnect Remote (OCR)	510	3C410000	- 3C410015	
				520	3C410005	- 3C410020
				530	3C410010	- 3C410025

S_Intern:
OCR 510, 520, 530 Software Version 5.03F


S_Bezeichnung:
Drv. v5.02i OfficeConnect 510, 520, 530 -US

S_Hinweise:
AccessBuilder Remote Office 500 (formerly Arpeggio Lite) & 600 (formerly Arpeggio Plus) and AccessBuilder 7000 PRI and BRI Bridge/Router Modules - Versions  05.02a  thru to 05.02I
Also - Office Connect Remote 510, 520 & 530.


S_Bezeichnung:
Drv. v5.03g OCR 510,520,530 Software -US

S_Hinweise:
Product Part Numbers:		As Below.
Latest Release Part Number:	000184.010
Update Disk Part Number:	on BBS (Filename OCR0503g.exe).
	
OfficeConnect Remote (OCR)
510	3C410000		- 3C410015	
520	3C410005		- 3C410020
530	3C410010		- 3C410025

S_Intern:
OCR 510, 520, 530 Software Version 5.03G


S_Hinweise:
SuperStack II Switch 2000 TR
               			Part #3C510600



				Version 2.00 Release Notes
   				    (December 24, 1996)

S_Intern:
Release 2.00 Software for the SuperStack II Switch 2000 TR


S_Hinweise:
SuperStack II  SW 2200 Intelligent Software Ver. 8.1.1

S_Intern:
SuperStack II  SW 2200 Intelligent Software Ver. 8.1.1


S_Hinweise:
NBRO 523, SNA Boundary Router (SW/NBR2TI-BF, 9.1.0.57)


S_Bezeichnung:
Drv. v9.1.0.57 SNA Router Remote Office -US

S_Hinweise:
To create a NETBuilder Remote Office software diskette:
(1) Using the DOS Format utility, format an 
    High Density (HD) diskette in your 1.44 floppy drive.
(2) If the image has a .ZIP extension, use PKUNZIP to 
    unarchive the files.
    If the image has a .EXE extension, execute this 
    self-extracting file.
(3) Copy the unarchived files onto the floppy drive.  
    For example, to copy the files to A: drive, type
              "copy boot.68k a:"
              "copy sys a:"


S_Bezeichnung:
Drv. v9.1.0.57 SNA Router Remote Office ISDN -US

S_Hinweise:
To create a NETBuilder Remote Office ISDN software diskette:
(1) Using the DOS Format utility, format an 
    High Density (HD) diskette in your 1.44 floppy drive.
(2) If the image has a .ZIP extension, use PKUNZIP to 
    unarchive the files.
    If the image has a .EXE extension, execute this 
    self-extracting file.
(3) Copy the unarchived files onto the floppy drive.  
    For example, to copy the files to A: drive, type
              "copy boot.68k a:"
              "copy sys a:"


S_Bezeichnung:
Drv. v2.01 Agent Software Switch 3000 (WIN) -US

S_Hinweise:
========================================================================
      SUPERSTACK II SWITCH 3000 TX 12 PORT MANAGEMENT AGENT VERSION 2.01
========================================================================

This file contains the following sections:

A)	Details of your legal rights and obligations

B)	Information about this release of Management Agent Software.


LEGAL RIGHTS
========================================================================
IMPORTANT: READ BEFORE INSTALLING OR USING THIS SOFTWARE
========================================================================
You should carefully read the following terms and the terms set forth in the 
NOTICES, especially those under the headings "No Warranty", "Limitation of 
Liability" and "US Government Legends", before using the software programs 
("Software") and any documentation you have obtained from 3Com. Installation or
use of the Software indicates that you accept such terms.


NO WARRANTY
===========
THE SOFTWARE AND DOCUMENTATION ARE PROVIDED ON AN "AS IS" BASIS AND ALL RISK
IS WITH YOU. BECAUSE THE SOFTWARE AND DOCUMENTATION ARE PROVIDED TO YOU FREE
OF CHARGE, 3COM MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY 
MATTER WHATSOEVER. IN PARTICULAR, ANY AND ALL WARRANTIES OF MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTIES RIGHTS 
ARE EXPRESSLY EXCLUDED. FURTHER, 3COM MAKES NO REPRESENTATIONS OR WARRANTIES
THAT THE SOFTWARE AND DOCUMENTATION PROVIDED YOU ARE FREE OF ERRORS OR VIRUSES
OR THAT THE SOFTWARE AND DOCUMENTATION ARE SUITABLE FOR YOUR INTENDED USE.


S_Hinweise:
NBRO 223, SNA Boundary Router (SW/NBRO-BF, 9.1.0.57)

S_Intern:
NBRO 223, SNA Boundary Router (SW/NBRO-BF, 9.1.0.57)


S_Hinweise:
for this file reply to Switch Files, SuperStack II Switch sw2200
fuer diese datei siehe Switch Files, SuperStack II Switch sw2200


S_Hinweise:
NBRO 221, Boundary Router, Ethernet (SW/NBRO-BX, 9.1.0.57)

S_Intern:
NBRO 221, Boundary Router, Ethernet (SW/NBRO-BX, 9.1.0.57)


S_Hinweise:
NOVELL PRODUCTS and VERSIONS:
NetWare 3.12
NetWare 4.1
NetWare 4.11

ABSTRACT:

The Config Reader - Internet Edition! (version 2.2) is a win 95 client based
utility that analyzes the config.txt file produced by the CONFIG.NLM (available
in TABND2.EXE).
 NOTE: The cfgrdrdb.ini database in now in /outgoing rather than /incoming. 
This version can now:
 - Use Passive Mode FTP connections
 - Print results of the Compare analysis
 - Suggestions can be copied to any app or doc
 - Print correctly from NT 4 systems
 - Analyze the IntranetWare ABEND.LOG file
 - Support configs created by CONFG7's NLMs
 CFGRD4.EXE replaces CFGRD3.EXE.


S_Intern:
FilterBuilder v1.03 - Self Extracting file


S_Bezeichnung:
LANplex 2500 Intelligent Switching v8.1.1

S_Hinweise:
Contained in the 3Com Corporation self extracting archive file L25iv811.EXE (LANplex 2500 Intelligent Switching Software Ver. 8.11) you will find the following files:

       File Name				Description

 25i811_1.EXE		LANplex 2500 Intelligent Switching  Software Ver. 8.1.1 (1 of 3)
 25i811_2.EXE		LANplex 2500 Intelligent Switching Software Ver. 8.1.1 (2 of 3)
 25i811_3.EXE		LANplex 2500 Intelligent Switching Software Ver. 8.1.1 (3 of 3) 
 25i811RN.pdf		LANplex 2500 Intelligent Switching Software Release Notes Rev 8.1.1
 LPX2000S.EXE		LANplex 2500 System Diagnostics Ver. 3.06


The Release Notes require the use of Adobe Acrobat Reader. If you do not have
this application you may obtain this shareware on the Web at www.adobe.com.

Please read the Release Notes before installing Ver. 8.1.1.

The files 25i811_1.EXE, 25i811_2.EXE, 25i811_3.EXE and LPX2000S.EXE are self 
extracting pkzip archives. Copy each of these files onto four seperate diskettes (e.g., at the DOS prompt  type  25i811_1 a:). 

NOTE: To avoid confusion, during installation, label your diskettes 1 of 2, 2 of 2,......, before extracting the
             files. 

Installation of ver. 8.1.1 will be accomplished using the first 3 diskettes and the installation instructions found in the Release Notes. Use the fourth diskette to upgrade the system diagnostics.

NOTE: Diagnostic Ver 3.06  is needed to support the ATM module.

The software contained in the above files can only be installed using either
Windows 95 or the Windows NT operating system.

S_Intern:
LANplex 2500 Intelligent Switching Ver. 8.1.1


