#
# This file is a Makefile for Tk.  If it has the name "Makefile.in"
# then it is a template for a Makefile;  to generate the actual Makefile,
# run "./configure", which is a configuration script generated by the
# "autoconf" program (constructs like "@foo@" will get replaced in the
# actual Makefile.

#----------------------------------------------------------------
# Things you can change to personalize the Makefile for your own
# site (you can make these changes in either Makefile.in or
# Makefile, but changes to Makefile will get lost if you re-run
# the configuration script).
#----------------------------------------------------------------

# Default top-level directories in which to install architecture-
# specific files (exec_prefix) and machine-independent files such
# as scripts (prefix).  The values specified here may be overridden
# at configure-time with the --exec_prefix and --prefix options
# to the "configure" script.

exec_prefix =	/usr/local
prefix =	/usr/local

# Directory in which to install the library of Tk scripts and demos
# (note: you can set the TK_LIBRARY environment variable at run-time to
# override the compiled-in location):
TK_LIBRARY =	$(prefix)/lib/tk

# Directory in which to install the archive libtk.a:
LIB_DIR =	$(exec_prefix)/lib

# Directory in which to install the program wish:
BIN_DIR =	$(exec_prefix)/bin

# Directory in which to install the include file tk.h:
INCLUDE_DIR =	$(prefix)/include

# Directory in which to install manual entry for wish:
MAN1_DIR =	$(prefix)/man/man1

# Directory in which to install manual entries for Tk's C library
# procedures:
MAN3_DIR =	$(prefix)/man/man3

# Directory in which to install manual entries for the built-in
# Tcl commands:
MANN_DIR =	$(prefix)/man/mann

# The directory containing the Tcl sources and headers appropriate
# for this version of Tk ("@srcdir@" will be replaced or has already
# been replaced by the configure script):
TCL_DIR =	@srcdir@/../tcl7.0b1

# Libraries to use when linking:  must include at least Tk, Tcl, Xlib,
# and the math library (in that order).  The "@LIBS@" part will be
# replaced (or has already been replaced) with relevant libraries as
# determined by the configure script.
LIBS = libtk.a $(TCL_DIR)/libtcl.a -lX11 -lm @LIBS@

# To change the compiler switches, for example to change from -O
# to -g, change the following line:
CC_SWITCHES = -O

# To compile under OpenWindows, reverse the comments on the following
# lines:
OW_FLAGS =
#OW_FLAGS = 	-I/usr/openwin/include -L/usr/openwin/lib

# To turn off the security checks that disallow incoming sends when
# the X server appears to be insecure, reverse the comments on the
# following lines:
SECURITY_FLAGS =
#SECURITY_FLAGS = -DTK_NO_SECURITY

# To disable ANSI-C procedure prototypes reverse the comment characters
# on the following lines:
PROTO_FLAGS =
#PROTO_FLAGS = -DNO_PROTOTYPE

# To enable memory debugging reverse the comment characters on the following
# lines.  Warning:  if you enable memory debugging, you must do it
# *everywhere*, including all the code that calls Tcl, and you must use
# ckalloc and ckfree everywhere instead of malloc and free.
MEM_DEBUG_FLAGS =
#MEM_DEBUG_FLAGS = -DTCL_MEM_DEBUG

# Some versions of make, like SGI's, use the following variable to
# determine which shell to use for executing commands:
SHELL =		/bin/sh

#----------------------------------------------------------------
# The information below is modified by the configure script when
# Makefile is generated from Makefile.in.  You shouldn't normally
# modify any of this stuff by hand.
#----------------------------------------------------------------

AC_FLAGS =		@DEFS@
INSTALL =		@INSTALL@
INSTALL_PROGRAM =	@INSTALL_PROGRAM@
INSTALL_DATA =		@INSTALL_DATA@
RANLIB =		@RANLIB@
SRC_DIR =		@srcdir@
VPATH =			@srcdir@

#----------------------------------------------------------------
# The information below should be usable as is.  The configure
# script won't modify it and you shouldn't need to modify it
# either.
#----------------------------------------------------------------


CC =		cc
CFLAGS =	${CC_SWITCHES} -I${SRC_DIR} -I${TCL_DIR} \
${AC_FLAGS} ${OW_FLAGS} ${PROTO_FLAGS} ${SECURITY_FLAGS} ${MEM_DEBUG_FLAGS} \
-DTK_LIBRARY=\"${TK_LIBRARY}\"

WIDGOBJS = tkButton.o tkEntry.o tkFrame.o tkListbox.o \
	tkMenu.o tkMenubutton.o tkMessage.o tkScale.o \
	tkScrollbar.o

CANVOBJS = tkCanvas.o tkCanvArc.o tkCanvBmap.o tkCanvLine.o \
	tkCanvPoly.o tkCanvPs.o tkCanvText.o tkCanvWind.o \
	tkRectOval.o tkTrig.o

TEXTOBJS = tkText.o tkTextBTree.o tkTextDisp.o tkTextIndex.o tkTextTag.o

OBJS = tk3d.o tkAppInit.o tkArgv.o tkAtom.o tkBind.o tkBitmap.o tkCmds.o \
	tkColor.o tkConfig.o tkCursor.o tkError.o tkEvent.o \
	tkFocus.o tkFont.o tkGet.o tkGC.o tkGeometry.o tkGrab.o \
        tkMain.o tkOption.o tkPack.o tkPlace.o tkPreserve.o tkSelect.o \
        tkSend.o tkWindow.o tkWm.o $(WIDGOBJS) \
	$(CANVOBJS) $(TEXTOBJS)

all: libtk.a wish

libtk.a: $(OBJS)
	rm -f libtk.a
	ar cr libtk.a $(OBJS)
	$(RANLIB) libtk.a

wish: libtk.a $(TCL_DIR)/libtcl.a
	$(CC) $(CFLAGS) tkAppInit.o $(LIBS) -o wish

tktest: libtk.a tkTest.o $(TCL_DIR)/libtcl.a
	${CC} ${CFLAGS} tkTest.o $(LIBS) -o tktest

test: tktest
	@cwd=`pwd`; \
	cd $(TCL_DIR); TCL_LIBRARY=`pwd`/library; export TCL_LIBRARY; \
	cd $$cwd; cd $(SRC_DIR); TK_LIBRARY=`pwd`/library; export TK_LIBRARY; \
	cd $$cwd; ( echo cd tests\; source all\; exit ) | ./tktest

install: libtk.a wish
	@for i in $(LIB_DIR) $(BIN_DIR) \
		$(INCLUDE_DIR) $(TK_LIBRARY) $(TK_LIBRARY)/demos \
		$(TK_LIBRARY)/demos/bitmaps $(MAN1_DIR) $(MAN3_DIR) \
		$(MANN_DIR) ; \
	    do \
	    if [ ! -d $$i ] ; then \
		echo "Making directory $$i"; \
		mkdir -p $$i; \
		chmod 755 $$i; \
		else true; \
		fi; \
	    done;
	@echo "Installing libtk.a"
	@$(INSTALL_DATA) libtk.a $(LIB_DIR)
	@$(RANLIB) $(LIB_DIR)/libtk.a
	@echo "Installing wish"
	@$(INSTALL_PROGRAM) wish $(BIN_DIR)
	@echo "Installing tk.h"
	@$(INSTALL_DATA) $(SRC_DIR)/tk.h $(INCLUDE_DIR)
	@cd $(SRC_DIR)/library; for i in *.tcl tclIndex prolog.ps; \
	    do \
	    echo "Installing library/$$i"; \
	    $(INSTALL_DATA) $$i $(TK_LIBRARY); \
	    done;
	@cd $(SRC_DIR)/library/demos; for i in *; \
	    do \
	    if [ -f $$i ] ; then \
	    echo "Installing library/demos/$$i"; \
		$(INSTALL_DATA) $$i $(TK_LIBRARY)/demos; \
	    fi; \
	    done;
	@cd $(SRC_DIR)/library/demos/bitmaps; for i in *; \
	    do \
	    echo "Installing library/demos/bitmaps/$$i"; \
	    $(INSTALL_DATA) $$i $(TK_LIBRARY)/demos/bitmaps; \
	    done;
	@cd $(SRC_DIR)/doc; for i in *.1; \
	    do \
	    echo "Installing doc/$$i"; \
	    rm -f $(MAN1_DIR)/$$i; \
	    sed -e '/man\.macros/r man.macros' -e '/man\.macros/d' \
		    $$i > $(MAN1_DIR)/$$i; \
	    chmod 444 $(MAN1_DIR)/$$i; \
	    done;
	@cd $(SRC_DIR)/doc; for i in *.3; \
	    do \
	    echo "Installing doc/$$i"; \
	    rm -f $(MAN3_DIR)/$$i; \
	    sed -e '/man\.macros/r man.macros' -e '/man\.macros/d' \
		    $$i > $(MAN3_DIR)/$$i; \
	    chmod 444 $(MAN3_DIR)/$$i; \
	    done;
	@cd $(SRC_DIR)/doc; for i in *.n; \
	    do \
	    echo "Installing doc/$$i"; \
	    rm -f $(MANN_DIR)/$$i; \
	    sed -e '/man\.macros/r man.macros' -e '/man\.macros/d' \
		    $$i > $(MANN_DIR)/$$i; \
	    chmod 444 $(MANN_DIR)/$$i; \
	    done;

Makefile: $(SRC_DIR)/Makefile.in
	$(SHELL) config.status

clean:
	rm -f *.a *.o core errs *~ \#* TAGS *.E a.out errors tktest wish

distclean: clean
	rm -f Makefile config.status

$(OBJS) tkTest.o: tk.h tkInt.h tkConfig.h
$(WIDGOBJS): default.h
$(CANVOBJS): default.h tkCanvas.h
$(TEXTOBJS): default.h tkText.h
tkWindow.o: patchlevel.h
