[winsock]
; name of this host
hostname=

; if use DNS for name resolution set the following to yes (default is no)
;usedomainnameserver=yes

; if use NIS for name resolution set the following to yes (default is no)
;usenisnameserver=yes

; domain this host belongs to
domainname=

; if use DNS or NIS, enter ip addresses of name servers
nameservers=

; to disable winsock background monitor set the following to no 
; (default is yes)
;usewinsockmonitor=no

; to substitute your own winsock monitor (instead of the one supplied), 
; set its name here
customwinsockmonitor=wsacore.exe

; full pathname of hosts, services and protocol files
; note that if name server is used, hosts file is not required. In 
; addition if internal services and protocol databases are used (see below), 
; pathnames for corresponding external services and protocol files are 
; not needed
hostsdb=\corewsds\hosts
;servicesdb=\corewsds\services
;protocolsdb=\corewsds\protocol

; CORE winsock contains built-in services and protocol files,
; hence obviating the need for external services and protocol files. If
; you do not wish to use the built-in files, set the following keywords 
; to no (default is yes)
;useinternalservdb=no
;useinternalprotodb=no
; if use bootp or DHCP server set it to yes (default is no)
usebootp=no
useinternalservdb=yes
useinternalprotodb=yes
usenisnameserver=no
usedomainnameserver=no
usehostsfileanddns=yes

[tcpip]
licensenumber=7W-9767-04B09F1

; ip address of this host
; if bootp or DHCP server is not used
ipaddress=

; network mask
netmask=255.0.0.0
gateways=
ipforwarding=yes
actasgateway=yes
subnetsarelocal=yes
allowicmpredirect=yes
; specify your packet filter library here (useful for gateway only)
;ipfilterlibrary=ipfilter.dll

[wsacore]
;debug=yes
visible=yes
;usepolling=no
; number of secs of inactivity before exiting (0 means never timeout)
inactivetimeout=1
;inactivetimeout=0
;testing=yes
;log=no
datatrace=no
tcptrace=no
udptrace=no
icmptrace=no
arptrace=no

[wping]
hostname=lucy
verbose=yes
debug=no
dontroute=no
iterations=1
packetsize=56
showmessagewindow=yes
twowindows=no
logfilename=\COREWSDS\WPING.log
backgroundcolor=65280
textcolor=16711680

[wfinger]
hostname=lucy
username=fred
backgroundcolor=255
textcolor=16777215
logfilename=\COREWSDS\WFINGER.log

[ethernet_0]
name=ethernet0-pktdrv
; IP address of interface (if different from local address above)
enabled=no
localipaddr=
netmask=255.0.0.0
mtu=1500

[serial_0]
;name=slip-interface
;name=ppp-interface
; local IP address, set to 0 if dynamically assigned by host
localipaddr=0.0.0.0
; remote IP address, set to 0 if dynamically assigned by host
remoteipaddr=0.0.0.0
enabled=yes
mtu=256
; do not change this
portmonitor=wsaslip.exe
; VJ compression, dynamic means support whatever mode used by host
;compressed=dynamic
compressed=yes
sendicmp=yes
port=com1
protocol=ppp
; Set to yes to accept incoming connection (i.e. run as server)
server=no

netmask=255.0.0.0
inactivetimeout=300

; other PPP-related parameters

asyncmap=0xffffffff
;asyncmap=0
; userid and password to send to remote if remote uses PAP
; if not set here, will prompt for at connection time
myuserid=my_userid_here
mypassword=my_password_here

; PPP negotiated options
; if run as server, require remote to send in user-id and password
pppopt_upap=no
; do VJC negotiation as defined by old RFC1172 (option 2)
pppopt_rfc1172vjc=no
; by default we will do IP address negotiation as defined by RFC1332
; (option 3). However, if remote host uses old RFC1172 format, we comply.
; do IP address negotiation as defined by old RFC1172 (option 1)
pppopt_rfc1172ipaddr=no
pppopt_cidcompression=no
pppopt_ipaddr=yes
pppopt_vjcompression=no
pppopt_upap=no
pppopt_mru=no
pppopt_accompression=no
pppopt_pcompression=no
pppopt_asyncmap=no
pppopt_magicnumber=no
;pppopt_startmode=passive
pppopt_startmode=active

[ppp_server_users]
; list of userids allowed to connect to this machine
; userid=password,localipaddr,remoteipaddr
my_user_id=TCwXjXAFGK6,193.47.1.3,193.47.1.5

[ppp_server_messages]
; if run as PPP server, messages to be sent to remote host to
; indicate login success or failure
loginsuccessmsg=Welcome to Internet-Connect (TM) PPP Server
loginfailmsg=Login to Internet-Connect (TM) PPP Server failed
logfile=pppusers.log

[wsaslip]
visible=yes
testing=no
; turn these off to maximize performance
debug=no
trace=no
log=no
defaultport=com1
; set your favorite dialer here. Set to blank (recommended) if
; use Internet-Connect built-in dialer (i.e. via wsaslip.scr script).
;dialer=wsadial.exe
dialer=
; login script
scriptfile=wsaslip.scr
; hangup script
;hangupscriptfile=hangup.scr
hangupscriptfile=
; time for wsaslip to exit after all winsock
; applications have terminated
exittimeout=1

[wsaslip_com1]
enabled=yes
connect=modem
;connect=direct
flowcontrol=rtscts
parity=None
stopbits=1
xonxoff=no
baudrate=9600
autoreconnect=yes
databits=8
onlinestatuscheck=usenone
; set to yes if wish to continually monitor DCD (default is no)
;monitordcd=yes

[wsaslip_com2]
enabled=no
connect=modem
;connect=direct
flowcontrol=rtscts
parity=none
stopbits=1
xonxoff=no
baudrate=9600
autoreconnect=yes
databits=8
onlinestatuscheck=usenone
; set to yes if wish to continually monitor DCD (default is no)
;monitordcd=yes

[wsaslip_com3]
enabled=no
connect=modem
flowcontrol=rtscts
parity=none
stopbits=1
xonxoff=no
baudrate=2400
databits=8
onlinestatuscheck=usenone
; set to yes if wish to continually monitor DCD (default is no)
;monitordcd=yes

[wsadial]
InitString=AT&F&D0V1
DialPrefix=ATDT
DialSuffix=
HangUp=ATH0
Connect1=CONNECT 1200
Connect2=CONNECT 2400
Connect3=CONNECT 9600
Connect4=CONNECT 14400
Fail1=NO CARRIER
Fail2=BUSY
Fail3=VOICE
Fail4=NO ANSWER
flowcontrol=rtscts
CarriageReturn=CR
;ApplicationName=wsaslip.exe
ApplicationDelay=5
DialOnStartup=NO
Trace=NO
Debug=NO
ExitOnConnect=NO
DialEntry=0
Log=NO

[wsatty]
NewLine=NO
LocalEcho=NO
AutoWrap=YES
Port=3
BaudRate=-236
DataBits=8
FlowControl=2
Parity=0
StopBits=0
XonXoff=NO
ForegroundColor=16711680
UseCNReceive=YES
DiaplayErrorMessages=YES

[ethernet_1]
name=ethernet1-pktdrv
localipaddr=0.0.0.0
netmask=255.0.0.0
mtu=1500
enabled=no

[serial_1]
name=slip1-interface
localipaddr=0.0.0.0
remoteipaddr=0.0.0.0
netmask=255.0.0.0
mtu=1500
enabled=no
inactivetimeout=300
compressed=yes
server=no
sendicmp=yes
protocol=slip
portmonitor=wsaslip.exe

[serial_2]
name=slip2-interface
localipaddr=0.0.0.0
remoteipaddr=0.0.0.0
netmask=255.0.0.0
mtu=1500
enabled=no
inactivetimeout=300
compressed=yes
server=no
sendicmp=yes
protocol=slip
portmonitor=wsaslip.exe

[serial_3]
name=
localipaddr=0.0.0.3
remoteipaddr=0.0.0.0
netmask=255.0.0.0
mtu=1500
enabled=no
inactivetimeout=300
compressed=yes
server=no
sendicmp=yes
protocol=ppp
portmonitor=wsaslip.exe

[wsaslip_com4]
enabled=no
connect=direct
flowcontrol=rtscts
parity=no
stopbits=1
xonxoff=no
baudrate=9600
databits=8
onlinestatuscheck=usenone
; set to yes if wish to continually monitor DCD (default is no)
;monitordcd=yes

[order]
mailserver=sun.cais.com

[DialDirectory]
Entry0=violet|1-908-4772788|COM1|9600|N|8|1|wsadial.scr|Modem
Entry1=linus-slip||COM2|9600|N|8|1||Direct

