$#KEditor
Description
Introduction
The Chart Editor is designed to help you quickly modify Charts.
To get help on any Topic in the Chart Editor, select the {bmc helpbutton.bmp} button at the top righthand side of the Editor window and drag it onto the Topic in question. TeeChart Pro help will show you the runtime property or method associated with the feature.
Editor design
There are 2 principal sections to the Chart editor, Chart parameters and the Series parameters, which are separated as 2 tabs of the Chart Editor.
{bmc Editortabs.bmp}
Chart pages
You may define overall Chart display parameters.

Series Pages
Series pages will contain parameters dependant on the series type concerned. The Combobox at the top of the Series tab page shows which series you are editing.

$#KAdd Series
Description
Add a new Series to the Chart.

$#KAdjustFrame
Description
The AdjustFrame property controls if Chart Title and Foot frames will be resized to full Chart dimensions or to the title text width.

$#KAlignment
Description
The Alignment property defines the Legend position.

Legend can be currently placed at Top, Left, Right and Bottom side of Chart.

$#KAlignment
Description
The Alignment property decides the alignment of the text of a TChartShape.

$#KAlignment
Description
The Alignment property controls how Chart Title and Foot text will be aligned within Chart rectangle.

A TChartTitle can optionally be surrounded by a Frame.

$#KEnable Zoom
Description
Enable/Disable Zoom on mouse drag.

$#KAngle
Description
The Angle property determines the Axis Title rotation in degree units.

Valid values are 0, 90, 180, 270 and 360 degrees.

$#KAnimated
Description
The AnimatedZoom property determines if Zoom will be performed directly or it will be displayed as an animated sequence of zooms. The AnimatedZoomSteps property controls the number of zoom steps. AnimatedZoom can be useful when there are a lot of points.

$#KAnimated Steps
Description
The AnimatedZoomSteps property determines the number of steps of the animated zooming sequence. Big number of steps can delay zooming. The AnimatedZoom property should be True.

$#KArea Brush
Description
Fill Brush characteristics of the Area of an Area Series

$#KArea Pen
Description
Pen used to draw Lines in Area Series.

$#KArrow Height
Description
The ArrowHeight property determines the vertical arrow head size in pixels for an ArrowSeries.

$#KArrow Width
Description
The ArrowWidth property determines the horizontal arrow head size in pixels for an ArrowSeries.

$#KAuto Mark Position
Description
The AutoMarkPosition property controls if Marks on TBarSeries will be repositioned if there’s the possibility of Mark overlapping. Marks are displaced to the top of the Bars to minimize the overlapping effect of Marks with long text or big font sizes.

$#KAutomatic
Description
When disabled, Maximum and Minimum Axis values may be manually set.

$#KAutomatic Maximum
Description
If Axis.Automatic is disabled setting AutomaticMaximum to True will automatically determine the Axis Maximum only. Minimum will require to be manually set.

$#KAutomatic Minimum
Description
If Axis.Automatic is disabled setting AutomaticMinimum to True will automatically determine the Axis Minimum only. Maximum will require to be manually set.

$#KAxis Pen
Description
The Axis property determines the kind of pen used to draw the Axis major lines. These are the lines which go from Axis Minimum to Axis Maximum screen positions.

$#KVisible Axis
Description
Enables/disables Axis visible for all Axes at once.

$#KBack Image Load
Description
Back Chart Panel image. May be .bmp, .wmf, .emf or .ico.

$#KBack Image Inside
Description
Restrict Backimage display to inside Chart Rectangle only.

$#KBack Image Mode
Description
The BackImageMode property determines how will the background bitmap be displayed. Eg. Stretched, Tiled or Centered.

$#KBar Brush
Description
Brush used to Fill Bars of a BarSeries.

$#KBar Pen
Description
Pen used to Draw Lines of a Bar Series.

$#KBar Style
Description
Choose the Type of Bar for the Bar Series. Eg. Rectangle, Pyramid or Ellipse.

$#KBar Width Percent
Description
The BarWidthPercent property determines the percent of total Bar width used. Setting BarWidthPercent := 100 makes joined Bars.

$#KBrush
Description
Brush used to fill a Series Pointer

$#KBrush
Description
Brush used to fill a Shape

$#KCaption
Description
The Caption property defines the string of text used to draw near to each Chart Axis. When empty, no Title is displayed.

$#KChange Series Type
Description
Changes the Series Type to an available Type offered by the TeeChart Gallery.

$#KScroll
Description
TChart and TDBChart components allow, by default, runtime Scrolling. Users need to drag the mouse while holding the right mouse button pressed.

$#KChart 3D Percent
Description
The Chart3DPercent property indicates the size ratio between Chart dimensions and Chart depth when Chart.View3D is True. You can specify a percent number from 1 to 100.

$#KAspect
Description
The Chart3DPercent property indicates the size ratio between Chart dimensions and Chart depth when Chart.View3D is True. You can specify a percent number from 1 to 100.

$#KShow Preview
Description
Shows a customisable PrintPreview of Chart.

$#KCircle Back Color
Description
The CircleBackColor determines the color to fill the ellipse.

$#KCircled
Description
The Circled property defines if a CircledSeries such as TPieSeries will be drawn elliptically or with same X and Y radius (circle).

$#KClip Points
Description
ClipPoints boolean property toggles the drawing of Series points within Chart boundaries, preventing other Chart regions from being overwritten.

$#KPanel Color
Description
Background colour of the entire TeeChart Panel.

$#KLegend Color
Description
Background colour of the Legend box.

$#KPen Color
Description
Colour of the Chart Pen used for drawing lines.

$#KWall Color
Description
Colour of the Selected Chart Wall.

$#KColor Each Point
Description
When enabled, assigns a different, TeeChart selected colour, to each Series point.

$#KColor Width
Description
The width of the Colour box representing the Series (or Series point) in the Legend.

$#KConnecting Pen
Description
Pen porperties for the Line that connects Gantt Bars.

$#KDark3D
Description
Dark shades the sides of 3D Objects.

$#KDirection
Description
The Direction property specifies the direction the gradient fill will be applied.

$#KDividing Lines
Description
The DividingLines property specifies the Pen attributes used to draw lines separating Legend’s items.

Lines are drawn horizontally for Left or Right aligned Legend and vertically for Top or Bottom Legend alignments.

$#KDraw3D
Description
The Draw3D property controls if Series Pointers will be drawn in a 3D way or not. Currently only rectangle points have 3D capability.

$#KEnd Color
Description
The EndColor property is one of the two colors used to create the gradient fill. The gradient fill is composed of two colors: StartColor and EndColor.

$#KExchange Series
Description
Interchanges the Series index between 2 Series. Their index position will determine there position from front to back on the Chart.

$#KLegend Font
Description
Text font for Legend Text

$#KShape Font
Description
Text font for text placed in a ChartShape Series' Shape.

$#KAxis Title Font
Description
Text font for Axis titles.

$#KTitle Font
Description
Text font for the Chart title text.

$#KFrame
Description
Enables/disables the Chart rectangle surrounding Frame.

$#KLegend Frame
Description
Enables/disables the rectangle surrounding the Legend.

$#KGrid Pen
Description
Pen used to draw Chart Grid Lines.

$#KRotation Angle
Description
The RotationAngle can be a valid integer number between 0 and 359. This will the angle each Pie sector will be rotated counter-clockwise.

$#KAxis Maximum
Description
Axis Maximum is the highest value an Axis will use to scale their dependent Series point values.

It can be any number or DateTime value.

It must be greater than the Axis.Minimum value.

VERY IMPORTANT:

Axis.Automatic property must be FALSE.

$#KHorizontal Margin
Description
The HorizMargin property speficies the number of screen pixels between Legend and Chart rectangles. By default its 0, meaning Legend will calculate a predefined margin based on total Legend width.

$#KHorizontal Size
Description
The HorizSize property specifies the Series Pointer width in logical pixels.

Series that derive from TPointSeries usually override the HorizSize and VertSize properties.

$#KIncrement
Description
Axis Increment is the minimum step between axis labels. It must be a positive number or DateTime value. TChart will use this value as the starting axis labels step. If there is not enough space for all labels, TChart will calculate a bigger one.

$#KInflate Margins
Description
The InflateMargins property controls if Chart dimensions will be rescaled to accomodate the Series.Pointer HorizSize and VertSize pixels. When False, Chart Axis scales will be preserved and points close to the Axis limits will be partially displayed.

$#KInverted Axis
Description
When Inverted is True, Axis Minimum and Maximum scales will be swapped. Axis labels and Series points will be displayed accordingly. This applies both to vertical and horizontal axis.

$#KInverted Stairs
Description
When Stairs is set to True you may set InvertedStairs to True to alter the direction of the step.

$#KLabels Visible
Description
The Labels property shows or hide Axis Labels. Set it to False to draw the Axis Ticks and / or Grid lines only.

$#KLabels enable
Description
The Labels property shows or hide Axis Labels. Set it to False to draw the Axis Ticks and / or Grid lines only.

$#KLabels Font
Description
Text font for Axis Labels.

$#KLabels On Axis
Description
The LabelsOnAxis property controls if Labels just at Axis Minimum and Maximum positions will be shown or NOT.

$#KLabels Separation
Description
The LabelsSeparation property specifies the percent amount of minimum distance between Axis Labels.

Setting it to "0" zero makes TChartAxis skip calculating overlapping labels. (No clipping is performed).

$#KLabels Size
Description
The LabelsSize property is 0 by default.

Therefore the space between the Axis and the Chart will be automatically calculated based on the Axis Labels Width and Height. Any other value will set the space in pixels.

$#KLabel Style
Description
Possible values:
Auto - Chooses the Style automatically. 
None - No label. 
Value - Axis labeling is based on axis Minimum and Maximum properties. Mark - Label using SeriesMarks style. 
Text - Label using Series.XLabels strings.

$#KLine Brush
Description
The LineBrush property defines the brush style used to fill LineSeries contents.

It has effect only when Chart1.View3D is True.

The Legend reflects automatically the selected brush style.

$#KLine Pen
Description
The LinePen property determines what kind of pen will be used for drawing the line connecting all points.

$#KLogarithmic
Description
This property scales the Axis Logarithmically when enabled. Axis Minimum and Maximum values should be greater than 0, and Axis cannot be of DateTime type.

$#KMargins
Description
Each Chart component has four margin properties: LeftMargin, RightMargin, TopMargin, BottomMargin.

These properties are expressed in screen pixels. Default values are 8 for top and bottom margins and 12 for left and right margins.

$#KMaximum Points Per Page
Description
The MaxPointsPerPage property controls "TeeChart AutoPaging". 

Setting it to a number greater than zero makes TeeChart to internally divide Series points in Pages.

$#KAxis Minimum
Description
Axis Minimum is the lowest value an Axis will use to scale their dependent Series point values. Can be any number or DateTime value. Axis 'Automatic' must be OFF.

Must be lower than the Axis.Maximum value.

$#KMinorTick Count
Description
The MinorTickCount property determines the number of Axis minor ticks. Axis minor ticks are the Axis sub-ticks between major ticks.

$#KMinorTick Length
Description
The MinorTickLength property indicates the length in pixels of Axis Minor ticks.

$#KMinor Ticks
Description
The MinorTicks property is the Pen used to draw the Axis Minor ticks. Minor ticks will only be displayed if MinorTicks.Visible is True.

$#KMinimum Value
Description
The MinValue property returns the lowest of all values inside the TChartValuelist.

$#KMultiArea
Description
The MultiArea property determines the kind of displayed Area when there's more than one AreaSeries with the same ParentChart. The default value is maNone, meaning all Areas will be drawn one behind the other. maStacked and maStacked100 modes will draw each Area on top of previous one. msStacked100 adjusts each individual point to a common 0..100 axis scale. The order which Series are accumulated depends on the Chart.SeriesList property.

$#KMultiBar
Description
If you have more than one TBarSeries in the same Chart, then you can choose if they will be drawn side-by-side, back-to-front or Stacked. Side-by-side means the Bar width will be divided by the number of Bar Series.

maNone: all Areas will be drawn one behind the other. 
maStacked and maStacked100: draws each Area on top of previous one. msStacked100 adjusts to a common 0..100 axis scale.

$#KNext Page
Description
Advances a page divided Chart by one Page.

$#KOffset Percent
Description
The OffsetPercent property indicates the Bar displacement in percent of Bar size. Displacement is horizontal for TBarSeries and vertical for THorizBarSeries. This property can be used to create "overlayed" Bar charts. Values may be +ve or -ve.

$#KFirst/Last
Description
Use the navigation buttons to scroll through the pages of a multipage Chart. First will take you to the first page and Last to the last page.

$#KPage
Description
The Page property determines the current visible points of Series in a Chart with MaxPointsPerPage property greater than zero.

$#KShape Pen
Description
Determines Pen used to draw Lines of a Shape.

$#KPointer Pen
Description
Determines Pen used to draw the Lines of a Series Point.

$#KCircle Pen
Description
Determines Pen used to draw the Lines of a Circled (eg. Pie) Series.

$#KPrevious Page
Description
Moves back one page on a pageable Chart.

$#KRemove Series
Description
Removes the currently selected Series.

$#KResize Chart
Description
The ResizeChart property indicates if Legend will automatically reduce the Chart rectangle to prevent overlap between Legend and Chart rectangles. This enables placing of the Legend inside the Chart Rectangle.

$#KRound First Label
Description
The RoundFirstLabel property controls if Axis labels will be automatically "rounded" to the nearest magnitude. This applies both to DateTime and non-DateTime axis values. When False, Axis labels will start at Maximum Axis value.

$#KExport Chart
Description
This button will save the current chart as to the specified File Name. Options for export are bitmap (bmp), Windows metafile (wmf or emf), Clipboard or TeeChart tee format. Tee templates are an efficient way to save runtime Chart appearance and may be loaded at runtime using the LoadChartFromFile.

$#KScale Last Page
Description
In a pageable Chart, when enabled, the last Chart page will have the same horizontal scaling than the other pages. When disabled, the last Chart page scaling will be adjusted based on the number of visible points on that last page.

$#KSeries Color
Description
Overall Colour of Series. This may be overidden by defining colours of individual Series points.

$#KShadow Color
Description
The ShadowColor property specifies the color to fill the Legend shadow effect.

$#KShadow Size
Description
The ShadowSize property controls the amount of pixels used to draw the Legend shadow effect.

$#KSide Margins
Description
The SideMargins property controls if first and last displayed Bar will be separated from the Chart rectangle. By default, margins are set to half the sum of all Bar Series bar widths.

$#KStairs
Description
In most situations, a Series draws a line between each Line point. This makes the Line appear as a "mountain" shape. However, enabling 'Stairs' will make the Series to draw 2 Lines between each pair of points, thus giving a "stairs" appearance.

$#KStart Color
Description
The StartColor property is one of the two colors used to create the gradient fill. The gradient fill is composed of two colors: StartColor and EndColor.

$#KPen Style
Description
The Style property determines the style in which the pen draw lines on the canvas.

$#KShape Style
Description
The Style property defines how a TChartShape component appears on a Chart.

These are the possible values and their meanings:

chasRectangle	The shape is a rectangle
chasCircle		The shape is a circle
chasVertLine	The shape is a vertical line
chasHorizLine	The shape is an horizontal line
chasTriangle	The shape is a triangle
chasInvertTriangle	The shape is an inverted triangle
chasLine		The shape is a line
chasDiamond	The shape is a diamond

$#KPointer Style
Description
The Style property defines the shape used to display the Series Points.

The Pointer can be:

psRectangle
psCircle
psTriangle
psDownTriangle
psCross
psDiagCross
psStar

$#KAxes
Description
Chart components have 5 TChartAxis:

LeftAxis, RightAxis, TopAxis, BottomAxis and DepthAxis.

Select an Axis with the radio button to activate that Axis for editing.

$#KGradient
Description
The TChartGradient component contains all properties used to draw a nice Chart background.

The gradient effect is made of two colors and many middle transition colors between them.

$#KGradient
Description
Enables/disables a background Gradient on the Chart panel set according the Start and End colours.

$#KTitles' Brush
Description
The Brush property determines the kind of brush used to fill the rectangle behind Chart.Title and Chart.Foot text.

$#KTitles
Description
The TChartTitle component is used to display Chart Title and Foot text strings at top and bottom Chart sides respectively. The Text property contains the text to be displayed.

$#KWall Brush
Description
The Brush property determines the kind of brush used to fill the Chart Walls background.

The Chart.View3DWalls property should be True to make walls visible.

$#KWalls
Description
The TChartWall component controls how to display the Chart left, back and bottom walls.

$#KSize
Description
The Size property determines the thickness of the selected Chart wall.

$#KText
Description
The Text property is used by TChartShape component to display customized text content inside Shapes.

$#KText
Description
The text applying to a Chart Header or Footer depending on which is currently selected.

$#KTick InnerLength
Description
The TickInnerLength property defines the length in pixels of Axis ticks drawn inside Chart boundaries.

$#KTick Length
Description
The TickLength property defines the length of Axis Ticks in logical pixels.

Use the Ticks Pen property to change pen attributes.

$#KTick On Labels Only
Description
This property sets the Axis Ticks and Axis Grid to be drawn only to coincide at Labels. Otherwise they will be drawn at all axis increment positions.

$#KTicks
Description
The Ticks property determines the kind of Pen used to draw Axis marks along the Axis line.

The 3 kinds of ticks are:  Ticks, MinorTicks and TicksInner.

$#KInner Ticks
Description
The TicksInner property determines the kind of Pen used to draw Axis marks along the Axis line. This is the same Ticks property does but lines are drawn inside Chart boundaries instead.

$#KTitle
Description
Every TChartSeries has a Title property of type String. The Title property is used in TChart.Legend to draw the series descriptions. If Title is empty, then the Series component Name will be used to draw the legend.

$#KTitle
Description
The Title property defines the Text and formatting properties to be drawn at Top Chart side.

$#KTitle
Description
Axis Title for the currently selected Axis.

$#KTitle Size
Description
The TitleSize property is 0 by default.

Therefore the space between the Axis Title and the Chart will be automatically calculated based on the Axis Title Width and Height.

$#KTop Position
Description
Default Value: 10

The TopPos property specifies the Legend's top position in percent of total chart height.

It's used when TChartLegend.Alignment is Left or Right only.

$#KTransparent
Description
Sets the Chart Shape's background to transparent.

$#KUse Patterns
Description
The UsePatterns property indicates, when True, that Pie Sectors will be filled using different Brush pattern styles. There are 6 different pattern styles.

$#KUse the Origin
Description
The UseYOrigin property defines if Bars will be bottom aligned to the YOrigin property value.

When False, the minimum of all Bar values is used as the Bar origins value.

$#KValue Format
Description
ValueFormat sets the way to display values. Eg. ###0.0###

$#KPoint Vertical Size
Description
Vertical size of the Series' Point

$#KView3D
Description
Enables viewing of the Chart as 2D or 3D

$#KVisible Wall
Description
View3DWalls will draw Left, Back and Bottom "walls" to simulate 3D effect.

$#KVisible Axis
Description
Enables/disables display of currently selected Axis.

$#KVisible Legend
Description
Enables/disables display of Legend.

$#KVisible
Description
Enables/disables display of Lines.

$#KVisible Title
Description
Enables/disables display of the Chart Title.

$#KVisible Pointer
Description
Enables/disables display of Series' Points.

$#KWidth
Description
Width of Pen. For Width greater than 1 style is disabled, the Line will be drawn as a solid Line.

$#KX
Description
These properties define the Top - Left and Bottom - Right coordinates of the englobing TChartShape rectangle.

$#KX Radius
Description
The XRadius property returns the exact ellipse's radius horizontal size in pixels.

$#KOrigin
Description
The YOrigin property determines the axis value used as a common bottom for all Bar points.

The UseYOrigin property must be True (the default) to use the YOrigin property.

$#KY Radius
Description
The YRadius property returns the exact ellipse's radius vertical size in pixels.

$#KElevation
Description
Elevation describes front plane rotation by rotation degrees (0 - 360º). Increasing the value positively will bring the top of the Chart towards the viewer and the bottom of the Chart away.

$#KChart Horizontal Offset
Description
HorizOffset will move the Chart Rectangle horizontally across the Chart Panel.

$#KOrthogonal
Description
Disabling Orthogonal (setting to False) disables the 2D Canvas and enables the 'Full' 3D Canvas allowing Elevation and Rotation displacement of the Chart.

$#KRotation
Description
Rotation describes front plane rotation by rotation degrees (0 - 360º). Increasing the value positively will bring the right of the Chart towards the viewer and the left of the Chart away.

$#KTilt
Description
ilt will rotate the Chart Rectangle within the Chart Panel. Positive values (from 0 to 360º) rotate the Chart anti-clockwise, negative values, clockwise.

*Important. Orthogonal should be set to False for Rotation to act on the Chart.

$#KChart Vertical Offset
Description
VertOffset will move the Chart Rectangle vertically across the Chart Panel. Positive values move the Chart downwards, negative values upwards.

$#KZoom
Description
View3DOptions' Zoom will zoom the whole Chart. Expressed as a percentage, Increasing the value positively will bring the Chart towards the viewer, increasing the overall Chart size as the Zoom value increases.

$#KExplode Biggest Slice
Description
Use this property to explode out  from the chart the largest slice.

$#KOther Slice
Description
Use this property to define the grouping size for the 'Other' slice of the Pie. Grouping may be expressed as a percentage or value.

$#KStyle
Description
Defines whether to use value or percentage to group the 'other' Pie slice.(eg. None, BelowPercent, BelowValue);

$#KText
Description
Label for 'Otherslice'

$#KValue
Description
Threshold value below which to include data point (or slice) in grouped 'Otherslice'.

$#KGrid Centered
Description
Places Axis Grid lines between (not at) label positions.

$#KZoom Text enable
Description
ZoomText enables/disables the zooming of text when using the TView3DOptions.Zoom property.

$#KMarks Style
Description
MarksStyle defines the possible values of the TSeriesMarks.Style property. Series Marks will draw a textual representation of each point values.

smsValue		1234
smsPercent		12 %
smsLabel		Cars
smsLabelPercent	Cars 12 %
smsLabelValue		Cars 1234
smsLegend		(Depends on LegendTextStyle)
smsPercentTotal	12 % of 1234
smsLabelPercentTotal	Cars 12 % of 1234
smsXValue		{ 21/6/1996 }

$#KMarks Back Colour
Description
The BackColor property defines the color used to fill the Marks background rectangle.

$#KMarks Font
Description
The Font property determines the font used to draw the Series Marks.

$#KMarks Frame
Description
The Frame property determines the kind of pen used to draw a rectangle around a Series Marks.

$#KMarks Arrow
Description
The Arrow property determines the kind of pen used to draw a line connecting the Point Mark to the corresponding Series point. 

$#KArrow Length
Description
The ArrowLength property determines the number of pixels used to display a line connecting the Series Marks to their corresponding points.

$#KClipped
Description
The Clip boolean property toggles if Marks outside Chart limits will overwrite any other Chart region.

$#KTransparent
Description
The Transparent property controls if Series Marks background will be filled or not.

$#KVisible
Description
The Visible property controls if Series Marks will be displayed or not.

$#KShow in Legend
Description
Controls whether or not the series title should display in Chart.Legend. It is only meaningful when when LegendStyle is 'Series' or 'LastValues'.

$#KSeries Cursor
Description
The Cursor property is the image used when the mouse passes into the region covered by a Series point. Each Series determines the intersection of points with mouse coordinates each time the mouse moves.

$#KHorizontal Axis
Description
Defines the Horizontal Axis ( Top or Bottom axis ) to which the Series will be horizontally scaled.

$#KVertical Axis
Description
Defines the Vertical Axis ( Left or Right axis ) to which the Series will be vertically scaled.

$#KDateTime
Description
The DateTime property tells TeeChart what type the numbers are. The horizontal (x axis) and vertical (y axis) value defaults are number format (DateTime False).

$#KPercent Format
Description
Chart Series components have a PercentFormat property. It is used to draw the Series Marks Percent Style figures.

$#KLegend Style
Description
The LegendStyle property defines which items will be displayed in Chart Legend.

lsAuto 		TChartLegend draws Series Titles if there's more than one TChartSeries
 in the TChart
lsSeries 	TChartLegend draws the Series Titles (also if there's only one TChartSeries in the chart.
lsValues 	TChartLegend draws the first Active TChartSeries values.
lsLastValues 	TChartLegend draws the Last Value of each Active TChartSeries (similar to lsSeries).

$#KLegend Text Style
Description
LegendTextStyle defines the possible values of the TChartLegend.TextStyle property.

ltsPlain		Summer
	ltsLeftValue	1234 Summer
	ltsRightValue	Summer 1234
	ltsLeftPercent	5.1 % Summer
	ltsRightPercent	Summer 5.1 %
	ltsXValue	4321 (Applies only to Series with X values. See TChartSeries.AddXY method.)

$#KWall Border
Description
Determines the kind of pen used to draw the Chart Walls frame. The Chart.View3DWalls property should be True to make walls visible.

$#KPosition
Description
Position of Axis as percentage of Chart Height (horizontal Axis) or Chart Width (vertical Axis). Top Left is 0,0.

$#KStart
Description
Start of Axis as percentage of width (horizontal Axis) and height (vertical Axis)  of the Chart rectangle. Original Axis scale will be fitted to new Axis height/width. Left Top is 0,0

$#KEnd
Description
End of Axis as percentage of width (horizontal Axis) and height (vertical Axis) of the Chart rectangle. Original Axis scale will be fitted to new Axis height/width. Left Top is 0,0

$#KLabels Multiline
Description
When True, spaces in point Labels or in Axis DateTimeFormat / ValueFormat are used to break the label in more than one line of text).

When False, labels with #13 characters are break in lines.

Example

Series1.Add( 1234, 'Hello'+#13+'World', clGreen );

$#KChart Title Color
Description
The Colour used to fill the Chart background

$#KTransparent Wall
Description
Defines whether the Wall will be filled with the Wall colour or be transparent.

$#KClone Series
Description
Makes a new, duplicate Series of selected Series.

$#KPeriod
Description
Period refers to the point range over which the function is applied. Eg. A Period of 3 for the Average function will calculate and plot the average for every 3 points. A Period of 0 sets TeeChart to add it's default Period.

$#KSet Function source
Description
Use the 'Available' and 'Selected' windows to select Series to be used as source data for the function. Foe multiple Series input (eg. Subtract Function) the Top Series in the List will subtract the 2nd and so on..

$#KDatasource
Description
The "point provider" (or DataSource) can be:

1) Another Chart Series.
2) Any TTable, TQuery, TClientDataset or Delphi database dataset.
Eg. Select a TTable in the Dataset Window and its fields will become available for Labels, X and Y values.

$#KOuter bevel
Description
Sets the size of the bevel that will form the outer side of the Chart panel.

$#KInner Bevel
Description
Sets the size of the bevel that will form the inner side of the Chart panel.

$#KPerspective
Description
Use this property with Orthogonal unchecked to modify the 3D perspective of the Chart. Larger values add more depth perspective.