Start this configuration with Windows: Enable this box if you want to start this profile with each windows starts.

Date:

Day: Select this box and specify a day if you want to start the supervision on a special day. It is also possible to specify any days e.g. the next week. This configuration will start the supervision on the start day that time and will end at the end day and end time.

Days of the week: Select this box and the days you want enable the supervision. The start and end time you configured in the next box will be used for each day.

Time: Specify the start and end time. If the Start time is higher than the stop time you configured an "overnight" protection. SupervisionCam will stop on the next day.

List box: All the listings are currently configured. Use the Add and Delete butting to configure it.

The following configuration starts the protection every night during the week but the hole time at the weekend.