

******************* IP-100 Help message file ***************
100: 1.1 Parameter
[*********** Parameter ***********]
[USAGE :]
  Prework before programming.These are: select S-CPU device
  you want to program, set S-CPU address you  want to write,
  verify and copy.
[DESCRIPTION:]
  <Parameter> has three sub-items:
     * Select type        Selecting  S-CPU  device you want
                          to program
     * Address set        Setting   S-CPU  and  RAM  buffer
                          address you want to program.
     * Quit to DOS        Returning to MS-DOS.
[EXPLATATION:]
  The detail explanation of using these items are followed.
101: 1.2 Select type:
[******** select type ********]
[FUNCTION:]
  Selecting S-CPU device and displaying it on the first line
  of the screen.
[DESCRIPTION:]
  Fourteen types of the S-CPU  can   be  selected.
[EXPLANATION:]
  The screen window of the device  type  list can  be moved,
  enlarged and reduced.  The method  of moving is showed  a:#u╦(═║â═╞â═²é═ââ═+â═éå>2&ü╔:$u■8■(■ :&ü■ ═éå═║â═╞â═²é═ââ═+â»2 u!≡" ü═╥â═╪å* ü≡╖φB}2!u|2"u:$u■╪■╚■╚═²é╔2≥<z╖┬¥:>■ └{=°╩¥■╥¥<2±<»gk├4═─(z╖┬¥:∞<╖╚{╖╩ß+├Y+>2Ω<├Y+»2Ω<├Y+> 2≥<═─(»2≥<z╖┬¥:>■ └{=°╩¥■╥¥<2±<»gk├4═─(z╖┬¥:∞<╖╚{╖╩ß+■
▄¥:>■ ┬ß+{22=+══>!π=w#"?=:∞<╖─⌐±■╖╩1,═4O├▀=2,=*F=~#"F=■!╥5φS$ü{2$ü!$ü5 ·#5 ≥╔:@üµ≡│2@ü╙É╔:@üµ│2@ü╙É╔:Aüµ≡│2Aü╙æ╔:Aüµ│2Aü╙æ╔:Büµ≡│2Bü╙Æ╔:Büµ│2Bü╙Æ╔:Cüµ≡│2Cü╙ô╔:Cüµ│2Cü╙ô╔:Düµ≡│2Dü╙ö╔:Düµ│2Dü╙ö╔:Eüµ≡│2Eü╙ò╔:Eüµ│2Eü╙ò╔:Füµ≡│2Fü╙û╔:Füµ│2Fü╙û╔:Güµ≡│2Gü╙ù╔:Güµ│2Gü╙ù╔:Hüµ≡│2Hü╙ÿ╔:Hüµ│2Hü╙ÿ╔:Iüµ≡│2Iü╙Ö╔:Iüµ│2Iü╙Ö╔:Jüµ≡│2Jü╙Ü╔:Jüµ│2Jü╙Ü╔:Küµ≡│2Kü╙¢╔:Küµ│2Kü╙¢╔:Lüµ≡│2Lü╙£╔:Lüµ│2Lü╙£╔:Müµ≡│2Mü╙¥╔2Pü╙ó╔2Qü╙í╔2Rü╙á╔:Müµ▀│2Mü╙¥╔:Müµ∩│2Mü╙¥╔:Müµ≈│2Mü╙¥╔═â>@╙ú╔!@ü═▌â╔!@üÉφú╚·═â═â╔═±é╔>E═╟é═±é╔>L═╟é═±é╔> ═╙éÇ═é╔>¢═╙éÇ═é╔>ÿ═╙éÇ═é╔>┌══é═sé╔>┌══é@═ºü╔>ÿ═╙éÇ═ºü╔>Ç╙É2@ü╙₧>╙ƒ╔═┐ü═╦ü═╫ü═πü═∩ü═√ü═é═é╔!ü0═▌â╔!@ü═▌â╔!≡═▌âsy▒╚#°~/w╔#≈*ü:$u■┌ä╩╫ä■┌▐ä╩Üà■╩╫ä■┬▐ä:#u╦G(	├╫ä>═εÄ╔╦E╩çä ═┐ü╦M╩Åä═╦ü╦U╩ûä ═╫ü╦](]═πü╦e([ ═∩ü╦m(Y═√ü╦u(W ═é╦}(U═é╦D(S ═é>2"ü╦L(═+é╔═+é╔═┐ü├(ä═╦ü£═╫üƒ═πüí═∩üú═√üÑ═éº═é⌐═é½╦T( ═7é╔═7é╔═ä═╟ä╔╦E╩Zà═âü:"ü■└╦M╩bà :@üµÇ│_═Åü:"ü■└╦U╩pà═¢ü:"ü■(╔╦](\ ═ºü╦e(Z ═»é╦m(X═úé╦u(V ═ùé╦}(T═ïé═iä═╟ä╦\(═Cé╔═Cé╔═âü├εä:@üµÇ│_═Åüò═¢üá═ºüó═»éñ═úéª═ùé¿═ïé¬═▐ä╦d( ═Oé╔═Oé╔»2ü*ü#"ü*ü+"ü|╡╔:üo╦E(E ═┐ü╦M(D═╦ü╦U(B ═╫ü╦](@═πü╦e(> ═∩ü╦m(<═√ü╦u(: ═é╦}(8═é╔═┐ü├╧à═╦ü║═╫ü╝═πü╛═∩ü└═√ü┬═é─═é╔█É╦O(╦└╦W(╦╚╦_(╦╨╦g(╦╪╦o(╦α╦w(╦Φ╦(╦≡█Æ╦o(╦°x2ü╔═²é═+â ═é═âü═Åü:$u■0 ═ºü:$u■8═¢ü═│ü═sé╔═[é═gé╔!░"ü*&u"ü*(u"ü╔:%u■µ╩0ï■Φ╩oê■Θ╩¡ë■Ω╩⌡å>═εÄ╔═╦å:$u■8╩òç■┌Éç╩ç■╩╪ç├òç■(═âü═âü═Åü═mâ═εâ ═Åü═pü═æâ═pü:$u■(═âü═pü═Gå:$u■(═âü═Åü:ü■(:ü<2ü■┬*ç> ═εÄ:#ü■ ═¡à┬*ç═éå╔═│ü ═é═sé═[é ═gé═εâ═gé═Gå:ü■ (:ü<2ü■ ▐> ═εÄ:#ü■└═¡à┬ñç╔ ═»é═xâ═âü:#u■8+ ═gé═ïé:#u╦o !"ü!"ü!"ü!"ü═εâ ═Åü═pü═æâ═pü═âü═pü═Gå═âü═Åü:ü■(:ü<2ü■┬ê> ═εÄ:#ü■ ═¡à┬ê═éå╔═┼å:$u■┌îê╩·ê■┌⌡ê(■╩*ë├·ê■(═âü═âü═Åü═mâ═εâ ═Åü═pü═æâ═pü:$u■(═âü═pü═Gå:$u■(═âü═Åü:ü*üw#"ü═¡à │═éå╔═│ü ═é═sé═[é ═gé═εâ═gé═Gå:ü*üw#"ü═¡à α╔ ═»é═xâ═âü:#u■8+ ═gé═ïé:#u╦o !"ü!"ü!"ü!"ü═εâ ═Åü═pü═æâ═pü═âü═pü═Gå═âü═Åü:ü*üw#"ü═¡à┬ië═éå╔═┼å²*ü:$u■┌╧ë╩Zè■┌Uè╩╧ë■╩ªè├Zè■(═âü═âü═Åü═mâ═εâ ═Åü═pü═æâ═pü:$u■(═âü═pü═Gå:$u■(═âü═Åü:ü²╛(:ü<2ü■ ░²~2ü>═εÄ:#ü■ ²#═¡à┬τë═éå╔═│ü ═é═sé═[é ═gé═εâ═gé═Gå:ü²╛(:ü<2ü■ ▌²~2ü>═εÄ:#ü■└²#═¡à┬iè╔ ═»é═xâ═âü:#u■8 ═gé═ïé!"ü!"ü═εâ ═Åü═pü═æâ═pü═âü═pü═Gå═âü═Åü:ü²╛(:ü<2ü■ ╛²~2ü>═εÄ:#ü■ ²#═¡à┬╨è═éå╔═┼å²*ü:$u■┌Rï╩ ï■┌≥î╩Rï■╩╓ì├ ï═Åü═âü ═é═sé═mâ²~2ü■╩≤ï═εâ ═Åü═pü═┬à═pü═Aâ6═pü═bâÇ6═pü═sé6═pü ═é═æâ═pü═sé═âü═Gå═Åü═âü═sé:ü²╛(:ü<2ü■
┬iï²~2ü>═εÄ²#═¡à┬iï═éå╔:t
  the screen's bottom line.
[WARNING:]
  If  you  <first> put the chip on  the  socket  and  <then>
  select the  Single  CPU type,some chip (8748H,8749H,8744H) 
  will be damaged.
  To aviod error,the correct steps are :
     <FIRST:>  select the type of the chip.
     <SECOND:> put the chip you choosed on the socket.
[STEPS:]
    * Move cursor bar to <Parameter> and press Enter key.
    * Move cursor bar to <Select type> and press Enter key.
    * Move cursor bar to select a device and press Enter key.
    * Press <F3> to move window position and use cursor key
      to enlarge and reduce in the window.
    * Stop window  movement and return to deivce type select
      state by pressing <ESC> key.
102: 1.3 Address set:
[******** Address set ********]
[FUNCTION:]
  Set S-CPU  address  you  want  to  write, verify and copy.
  The default is the whole S-CPU address is setted.
[STEPS:]
   * Move cursor bar to <Parameter> and press Enter key.
   * Move cursor bar to <Address set> and press Enter key.
   * Key in program start address on <S-CPU START ADDRESS>
     line and press Enter key.
   * Key in program end address on <S-CPU  END ADDRESS>
     line and press Enter key.
   * key in RAM buffer start address on <MEMORY START ADDRESS>
     and press Enter key.
   * Return to <Address set> menu by press ESC key.
103: Quit to MS_DOS
[FUNCTION:]
   Return to MS-DOS.
200: 2.1 File
[******** File ********]
[USAGE:]
  Prework before programming. These are:  loading data  file
  into the RAM buffer, saving data file from  RAM buffer  to
  the disk and modifying memory.                    
[DESCRIPTION:]
  <File> has six sub-items:
     * Load file          Reading  data file from disk  into
                          the RAM buffer.
     * Load encryption    Reading  encryption data file from
       array data file    the disk into the RAM buffer.
     * Load  signature    Reading  signature bytes data file      
       bytes file         from the disk into the RAM buffer.
     * Save file          Saving  data file from RAM  buffer
                          into disk.
     * Modify memory      Modifying or  displaying  the data
                          in the RAM buffer.
     * Quit to DOS        Returning to the MS-DOS.
[EXPLATATION:]
  The detail explanation of using these items are followed.
201: 2.1 Load file:
[******* Load file *******]
[FUNCTION:]
  Read  programming loading data file  from the disk in the
  RAM buffer.

[EXPLANATION:]
  The  file name  will be displayed on the top of screen if
  the file read is correct.
[STEPS:]
   * Move cursor bar to <File> and press Enter key.
   * Move cursor bar to <Load file> and press Enter key.
   * Key in programmer's loading file name (suffix included)
     and press Enter key.
   * Return to <Load file> menu.
202: 2.2 Load encryption data file:
[******** Load encryption data file ********]
[FUNCTION:]
  Read encryption data file from the disk in the RAM buffer.

[EXPLANATION:]
  The  file name  will be displayed on the top of screen if
  the file read is correct.
[STEPS:]
   * Move cursor bar to <File> and press Enter key.
   * Move  cursor  bar  to  <Load encryption data file>  and
     press Enter key.
   * Key in programmer's loading file name (suffix included)
     and press Enter key.
   * Return to <Load encryption data file> menu.
203: 2.3 Load signature bytes file:
[******** Load signature bytes file ********]
[FUNCTION:]
  Read encryption data file from the disk in the RAM buffer.

[EXPLANATION:]
  The  file name  will be displayed on the top of screen if
  the file read is correct.
[STEPS:]
   * Move cursor bar to <File> and press Enter key.
   * Move  cursor  bar  to  <Load signature bytes file>  and
     press Enter key.
   * Key in programmer's loading file name (suffix included)
     and press Enter key.
   * Return to <Load signature bytes file> menu.
204: 2.4 Save file:
[******** Save file: ********]
[FUNCTION:]
  Save the data in RAM buffer to disk.
[STEPS:]
   * Move cursor bar to <File> and press Enter key.
   * Move cursor bar to <Save file> and press Enter
     key.
   * Key in file name followed by Enter key.
   * Return to <Save file> menu.
205: 2.5 Modify memory
[******** Modify memory ********]
[FUNCTION:]
  Displaying ,modifying ,searching ,comparing , filling data
  in the RAM buffer.
[STEPS:]
   * Move cursor bar to <File> and press Enter key.
   * Move cursor bar to <Modify memory> and press Enter key.
   * Process  according  to promotion at the screen.
   * Press <q> key return to <Modify memory> menu.
206: Quit to MS_DOS
[FUNCTION:]
   Return to MS-DOS.
300: 5.3 Program
[********* Program *********]
[USAGE:]
  Accomplishing the programming of selected device.
[DESCRIPTION:]
   Automatic        Processing <Blank> + <Write> + <Verify>
   ERASE            Blank chip testing.
   Read             Reading chip's data into the RAM buffer.
   Verify           Comparing chip's data in the RAM buffer.
   Write            Writing data in RAM buffer to chip.
   Lock bit1 pro-   Lock  bit1  writing , only  87C51H  and
   gram             8752BH have this function.
   Security bit     Writing  the  security  bit, only 8744H,
   program          8751H,8741AH,8742AH have this function.
   Encryption       Writing  the  Encryption  array , only
   array pprogram   87C51H, 8752BH have this function.
   Signature bytes  Writing the signature byte, only 8741AH,
   program          8742AH have this function.
[EXPLANATION:]
   Read   the   help   explanation  to know the  individual
   requirement before using these ten subitems. It is  very
   important to check the device type  to  make  sure  that
   the chip inserted is the same as selected otherwise  the
   chip can be destroyed .
301: 5.3.1 Automatic
[********* Automatic *********]
[FUNCTION:]
   Processing the operation of <Blank> + <Write>+ <Verify>.
[REFERENCE:]
   Reference the explanation of the individual sub-items.
[STEPS:]
   * Select the same device type as the chip being handled.
   * Read data file to be writen to the chip.
   * Place  the  chip  in  test  socket  and  fix it firmly
     (bottom align and pin1 to LED).
   * Move cursor bar to <Program> and press Enter key.
   * Move cursor bar to <Automatic> and press Enter key.
   * Return to <Automatic> menu.
[ERROR MESSAGE:]
   Correct  message  will  be  displayed  on  the screen if
   operation is right  otherwise  the error message will be
   displayed to show what error happened and return.
302: 5.3.2 Blank
[*********** Blank ************]
[FUNCTION:]
   Checking to see  if the chip  is blanked .
[EXPLANATION:]
   Before doing Blank, You should check the the device type
   displayed  on the first row of screen  and make sure  it
   is the same  as  the  chip  to be handled to  avoid  the
   damage of it.After operation, the data in the RAM buffer
   is not changed.
[STEPS:]
   * Choose  same type of chip as to be used.
   * Place  the  chip  in  test  socket  and  fix  it
     (Pin1 to front and bottom align).
   * Move cursor key to <Program> and press Enter key.
   * Move cursor key to <Blank> and press Enter key.
   * Return to <Blank> menu.
[ERROR MESSAGE:]
   "ERASE OK ! "  is displayed  it  is  all right,otherwise
    display  corresponding  error  message   and
   " ERASE ERROR ! " .
303: 5.3.3 Write
[************** Write **************]
[FUNCTION:]
   Writing the data in the RAM buffer to the chip.
[EXPLANATION:]
   RAM buffer is not changed after the operation.
[STEPS:]
   * Select the device   type  according  to the chip to be
     writen.
   * Preparing  the  data to be writen in the RAM  buffer.
   * Place and fasten the chip in test socket.
   * Move cursor bar to <Program> and press Enter key.
   * Move cursor bar to <Write> and press Enter key.
   * Return to <Write> menu.
[ERROR MESSAGE:]
   Display " WRITE OK !" if operation is correct, otherwise
   display "WRITE ERROR !" and corresponding error message.
304: 5.3.4 Verify
[*********** Verify ***********]
[FUNCTION:]
   Reading  data and comparing it with the data in the RAM
   buffer.
[EXPLANATION:]
   <Verify> doesn't change data in the RAM buffer.
[STEPS:]
   * Select  correct deivce type .
   * Place the chip in the test socket and fasten it .
   * Move cursor bar to <Program> and press Enter key.
   * Move cursor bar to <Verify>  and press Enter key.
   * Return to <Verify> menu.
[ERROR MESSAGE:]
   " VERIFY OK ! "   is  displayed  if  correct,  otherwise
   " VERIFY ERROR ! " is displayed.
305: 5.3.5 Copy
[********* Copy **********]
[FUNCTION:]
   Reading data in the chip to the RAM buffer.
[EXPLANATION:]
   The  contents  in  RAM  buffer  are  changed  after  the
   operation. If you want to duplicate the chip, change the
   chip  just  read  with  a  new  one  and  do <Automatic>
   in <Program> item.
[STEPS:]
   * Choose the same device type as the  chip being used.
   * Instert the chip to the test socket and fix it.
   * Move cursor bar to <Program> and press Enter key.
   * Move cursor bar to <Copy> and press Enter key.
   * Return to <Copy> menu.
[ERROR MESSAGE:]
   " COPY OK ! "   is  shown  on  the  screen  if  correct,
   otherwise " COPY ERROR ! " is displayed.
306: 5.3.6
[FUNCTION:]
   Programming  lock  bit1  from  0  to  1  if the chip you
   selected are 87C51H or 8752BH.  Programming security bit
   if the chip you selected are 8744H, 8751H,8741AH 8742AH.
   Or quit to  MS-DOS if the  chip you selected are  8748H,
   8749H,8742.
[EXPLANATION:]
   RAM buffer is not changed after the operation.
[STEPS:]
   * Select the device   type  according  to the chip to be
     writen.
   * Place and fasten the chip in test socket.
   * Move cursor bar to <Program> and press Enter key.
   * Move cursor bar to <Lock bit1 program> or
     <Security bit program> or <Quit to DOS> and press Enter
     key.
   * Return to <Lock bit1 program> or <Security bit program>
     menu.Or return to MS-DOS.
[ERROR MESSAGE:]
   Display " LOCK BIT1 WRITE OK !" or "SECURITY BIT WRITE
   OK!"if operation is correct, otherwise display "LOCK BIT1
   WRITE ERROR !" or "SECURITY BIT WRITE ERROR !".
307: 5.3.7 Lock bit2 program
[FUNCTION:]
   Programming Encryption array if the chip you selected are
   87C51H,8752BH.Programming signature bytes if the chip you
   selected are 8741AH or  8742AH. Or  quit to MS-DOS if the
   chip you selected are 8744H or 8751H.

[EXPLANATION:]
   RAM buffer is not changed after the operation.
[STEPS:]
   * Select the device   type  according  to the chip to be
     writen.
   * Place and fasten the chip in test socket.
   * Move cursor bar to <Program> and press Enter key.
   * Move cursor bar to <Encryption array program> or
     <Signature bytes program> or <Quit to DOS> and press
     Enter key.
   * Return to <Encryption array program> or
     <Signature bytes program> menu or Quit to MS-DOS.
[ERROR MESSAGE:]
   Display" ENCRYPTION ARRAY WRITE OK !" or "SIGNATURE BYTES
   WRITE OK !" if operation is correct, otherwise  display
   "ENCRYPTION ARRAY WRITE ERROR" or "SIGNATURE BYTES WRITE
   ERROR !"
308: Quit to MS-DOS
[FUNCTION:]
   Return to MS-DOS.
400: 5.4 Msdos
[********** Msdos **********]
[USAGE:]
   Basic function of Msdos.
[EXPLANATION:]
   Providing convenience of using disk operating system  for
   user's special demand.
[DESCRIPTION:]
   There are eight sub-items under <Msdos>:
   * Os    shell    The shell of  Msdos  with entire  Msdos
                    environment.
   * Directory      Listing files name.
   * Logged  dir    Changing path of directory.
   * Print  file    Printing assigned ASCII file.
   * Copy   file    Copying one disk file to another one.
   * Rename file    Changing disk file name.
   * Erase  file    Erasing an assigned disk file.
   * Quit to DOS    Returning to MS-DOS.
401: 5.4.1 OS Shell
[********* OS Shell *********]
[FUNCTION:]
   Enterring Msdos and executing all kinds of standard DOS's
   command.   Remembering  original path and save RAM's data
   so that program  can  return  to original state when user
   press "Exit" in DOS environment.
[STEPS:]
   * Move cursor bar to <Msdos> and press Enter key.
   * Move cursor bar to <Os shell> and press Enter key.
   * Enter DOS and use DOS command.
   * Key in "Exit" in DOS enviroment and press Enter key.
   * Return to <Os shell> menu.
[REFERENCE:]
   The chapter about MS-DOS command  in Disk Operation System
   manual.
402: 5.4.2 Directory
[********* Directory *********]
[FUNCTION:]
   Listing the file name of named disk.
[STEPS:]
   * Move cursor bar to <Msdos> and press Enter key.
   * Move cursor bar to <Directory> and press Enter key.
   * Key in disk and name and press Enter key.
   * Return to <Directory> menu.
403: 5.4.3 Logged dir:
[********** Logged dir: **********]
[FUNCTION:]
   Selecting directory path.
[STEPS:]
   * Move cursor bar to <Msdos> and press Enter key.
   * Move cursor bar to <Logged dir> and press Enter key.
   * Key in directory path and  press Enter key.
   * Return to <Logged dir> menu.
404: 5.4.4 Print file
[********** Print file **********]
[FUNCTION:]
   Printing  named ASCII file on the disk.
[STEPS:]
   * Connect printer and turn on the printer's power .
   * Move cursor bar to <Msdos> and press Enter key .
   * Move cursor bar to <Print file> and press Enter key.
   * Key in disk and file name followed by Enter key.
   * Return to <Print file> after printing.
[LIMITATION:]
   The file to be printed must be ASCII text pattern file.
405: 5.4.5 Copy file
[********** Copy file **********]
[FUNCTION:]
   Duplicating an assigned file to another disk file.
[STEPS:]
   * Move cursor bar to <Msdos> and press Enter key.
   * Move cursor bar to <Copy file> and press Enter key.
   * Key in source file name followed by Enter key.
   * Key in target file name and press Enter key.
   * Press any key to return to the <Copy file> menu.
406: 5.4.6 Rename file
[********* Rename file *********]
[FUNCTION:]
   Renaming an assigned file on disk.
[STEPS:]
   * Move cursor bar to <Msdos> and press Enter key.
   * Move cursor bar to <Rename file> and press Enter key.
   * Key in source file name and press Enter key.
   * Key in target file name and press Enter key.
   * Return to  <Rename file> menu.
407: 5.4.7 Erase  file
[******** Erase  file ********]
[FUNCTION:]
   Erasing a file on disk.
[STEPS:]
   * Move cursor bar to <Msdos> and press Enter key.
   * Move cursor bar to <Erase file> and press Enter key.
   * Key in file name to be erased.
   * Return to <Erase file> menu.
408: Quit to MS_DOS
[FUNCTION:]
   Return to MS-DOS.
500: 5.5 Options
[********** Options **********]
[USAGE:]
   These are the assistant options such as selecting window
   size and position,    setting communication port address,
   calling combinational software, handling clock and batch
   file.
[DESCRIPTION:]
   There are nine sub-items:
   * Set port address       Set  programmer's  commnuication
                            port address
   * Help size set          Size  and position  setting of a
                            help level window
   * Pctools box            loading and executing of Pctools
                            tool box software.
   * Load SK box            Loading   and  executing  of  SK
                            software.
   * Open clock             Opening  real  time   clock  and
                            displaying it on the screen.
   * Close clock            Closing   real  time  clock  and
                            erasing  clock  displayed on the
                            screen.
   * Debug (symdeb)         Debug function.
   * Another select         Executing   user  defined  batch
                            file Another.BAT.
   * Quit to DOS            Return to MS-DOS.
501: 5.5.1 Set Port Address
[*********** Set Port Address ***********]
[FUNCTION:]
   Setting communication  port address to the address on the
   adapter.
[EXPLANATION:]
   We  have  set  the  adapter  port  address to 3E0H as the
   software set. If user need to change address, he must set
   adapter  port  address  and  the software port address to
   same value following the help in <Set port address> item.
[LIMITATION:]
   Hardware  and  software  must  be  set  to  the same port
   address, if not,  communication  will fail and programmer
   can't work.
[STEPS:]
   * Move cursor bar to <Options> and press Enter key.
   * Move cursor bar to  <Set port address>  and press Enter
     key.
   * Move cursor bar to  selected  port  address  and  press
     Enter key.
   * Return to <Set port address> menu.
502: 5.5.2 Help Size