QENT                                                Menu: (WALLS) WEDIT / INFO
==============================================================================
Queries the attributes of an entity and types them in the prompt line of
the screen.

         1.* (IND) entity to be queried
         2.* (Y/N) confirm choice

Description
This command informs you of the current attributes of an indicated entity.

Indicate and confirm the entity to be queried. The requested information
will be displayed in the prompt line of the graphic screen. The message
will remain displayed until you press any key or mouse button, or until you
enter another command.

If there are more attributes than can be contained on the message line,
"MORE . . ." will appear at the end of the line and the next line will be
displayed when  you press any key or mouse button. If you want all the
attributes to be displayed on one screen, use the \QENT1 command.

The system attributes are presented in the following formats:

surface polygons:
*       ar      =       area
*       p       =       perimeter
        sn      =       2D library entity
solid entities:
*       vo      =       volume
*       ar      =       area of faces
        nu      =       complex solid
axial walls:
        ww      =       left width
                        right width
        wz      =       height at 1st end point
                        height at 2nd end point
*       wa      =       volume
                        area of left face
                        area of right face
                        area of wall base
*       h       =       maximum height
multi-layer walls:
        wn      =       wall name
        wz      =       height at 1st end point
                        height at 2nd end point
                        (heights to which wall will be restored if 3D
                        model of wall is erased (\mw2d) and
                        recreated (\mw3d))
*       wz      =       updated heights after sectioning (ONLY for areas
                                        and `irregular walls')
*       wa      =       volume
                        area of left face
                        area of right face
                        area of wall base
*       h       =       maximum height
        ws1     =       1st wall end status      j-joined
                        1st wall end status      c-closed
        ws2     =       2nd wall end status      j-joined
                        2nd wall end status      c-closed
        off     =       offset distance
*       mwe     =       layer widths
        aln     =       alignment by: 1 first layer
                        alignment by: -1 last layer
                        alignment by: 0 center
        cln     =       indication of wall refinement
        $seg    =       no. of segments in 3D multi-layer wall arc
multi-layer wall openings
*       wz      =       updated heights after sectioning (ONLY for areas
                                        and `irregular walls')
*       3dsn    =       name of predesigned opening
*       oz      =       height of predesigned opening
*       ol      =       length of opening
*       ov      =       volume of opening
*       ora     =       area of right face opening
*       ola     =       area of left face of opening
*       orl     =       length of right side of opening
*       oll     =       length of left side of opening
        sn      =       name of opening or 2D library entity
        con1    =       end condition attached to 1st end point
        con2    =       end condition attached to 2nd end point
        con     =       end condition (not opening)
        ecn     =       end condition name
        conl    =       end condition attached to left of opening
        onr     =       end condition attached to right of opening
        ofz     =       height of opening above floor
        oz      =       height of 3D opening or name of solid linked to                         opening in
                        predefined opening
        scz     =       scaling along z of predefined opening
3D placed entities:
*       scl = factors (x y z)
text, dimension entities and linear patterns:
        ta      =       text attributes in old database
        tb      =       text attributes in new database - 11 values
                        text size (meters), 0, color, 0, 0, font no.,
                          justification, 100, X of text plane,
                          Y of text plane, 0
                        dimension size (meters), edit code, color, 0,0
                        font no., justification, 100, X of
                        plane, Y of plane, 0
        t       =       text string or pattern code
        $tf     =       text font name
        $lh     =       linear pattern font name
        $wnh    =       multi-layer wall fill patterns
staircases:
        rise    =       rise
        tread   =       tread
        2h+b    =       controlling formula

NOTE 1: In addition to the system attributes, the non-geometric
        attributes added by the user are also displayed.
NOTE 2: The order of the attributes may be changed if the entity is updated.
