FRCPY                                                              Menu: MANIP
==============================================================================
Selects entities within a fence, and copies and rotates them.

        1.   (POINT) first corner of fence
        2.   (POINT) opposite corner of fence
        3. * (POINT) point to copy & rotate from
        4. * (NUM) rotation angle (+/360)
        5. * (POINT) copy to point

Description:
This command selects entities within a fence, copies them, and translates and
rotates the copies. It is especially useful for instances (placed objects)
that you wish to set on a plane (columns, pre-designed elements, etc.). The
resulting entities appear only after the next redraw command (e.g., \refr).
The copied group of entities is selected by the system for further
manipulations.
Pick the first and opposite corners of the fence. Pick the point from which
you wish to copy and rotate your selection group, and then enter the rotation
angle about the xy plane. Finally, pick the destination point.
You are prompted to pick additional "from" points, rotation angles, and "to"
points until you enter another command.

        Example: \frcpy -2 -2 0 0 0 0 0 0 0 45 3 3 0

Result: All entities or instances within the fence from point -2 -2 0 to point
0 0 0 will be copied from 0 0 0 to 3 3 0 with rotation of 45 about xy relative
to the original group. The new group is now the selected one, ready for more
manipulations.
