DELE                                                       Menu: (WALLS) WEDIT
                                                                 (MWALS) MWEDT
                                                                  (DRAW) EWIRE
                                                                   (DSG) DEDIT
==============================================================================
Deletes an entity from the model or a drawing from a drawing sheet.
(A loop nested command.)

         1.* (IND) entity to be deleted, <ENTER>  to exit command
         2.* (Y/N) confirm choice

Description
This command deletes an indicated entity.  A placed entity will be removed
from your model, leaving its original file unaffected.

In the Drawing Sheet Generator module a placed drawing will be deleted with
its enclosing frame.

When an axial wall line is deleted, the entire wall is deleted.

To delete a solid prism, both its bases should be indicated.

When deleting a multi-wall, all the openings in that wall will be deleted
together with the wall.  If the wall forms the "head" or "leg" member in a
T-junction between two multi-walls, the remaining member will also be
"healed." If you delete an opening in a multi-layer wall, the wall will be
automatically "healed." If a wall that forms part of a continuous string of
walls is deleted, the adjacent walls will not be "healed." If you delete the
2D base of a multi-layer wall, the 3D model of that wall will also be deleted.
If you indicate only the 3D model, the 2D base will remain.

Indicate and confirm the entity or placed drawing to be deleted.  The entity
or drawing will be deleted from your model or drawing sheet.  You may indicate
additional entities or drawings to be deleted until you enter a new command or
press <ENTER> to return to the previous command.

NOTE 1: An entity cannot be restored after it has been deleted.
Think twice before confirming the deletion!
NOTE 2: When indicating a drawing in the Drawing Sheet Generator you may
indicate either the frame itself or its contents but indicating the frame will
save time.
