DCROT                                                        Menu: (DSG) DEDIT
==============================================================================
Rotates a drawing within its frame.

         1.  (IND) frame to rotate content
         2.  (Y/N) confirm choice
         3.  (POINT) center of rotation, <ENTER>-frame middle pt.
         4.* (NUM) rotation angle (+/- 0-360), <ENTER>-new center of rotation
         5.* (Y/N) keep the result ?

Description
This command rotates a drawing within its frame on a drawing sheet.

Indicate and confirm the drawing to be rotated. Specify a point to
be the center of rotation. Press <ENTER> if this point
is to be the frame's middle point. This may be any point inside or
outside the drawing sheet. Then specify the angle of rotation (0-360
degrees). To define a new center of rotation, press <ENTER>.

Confirm the result. If you reply `n' the original state will be restored.

The system prompts you to specify another angle for the drawing until
you select a new command. If you wish to rotate another drawing, restart
the command (press B3 of the mouse or <Alt> +F9).

NOTE 1:When indicating a drawing you may indicate either the frame itself or
its contents but indicating the frame will save time.
NOTE 2: If the drawing was an unclipped drawing (red frame) it will become
a clipped drawing (green frame) once it has been rotated.
NOTE 3: The frame containing the drawing is not rotated. If you wish to
rotate the frame together with its contents use the \dmrot command
(increments of 90 degrees only).
