CORNR                                                              Menu: MWALS
==============================================================================
Creates a corner between two multi-layer walls or between a multi-layer wall
and a multi-layer wall arc.
(A loop nested command.)

         1.* (IND) first wall to form a corner, <ENTER>-to exit command
         2.* (Y/N) confirm choice
         3.* (IND) second wall to form a corner
         4.* (Y/N) confirm choice

Description

This command creates a corner between two multi-layer walls or between a
multi-layer wall and a multi-layer wall arc.

Indicate and confirm the two multi-layer wall entities that are to form a
corner.  The walls will be shortened or lengthened to the corner.  If the two
walls cross, you must indicate the walls on the side that is to be retained.

You may indicate additional multi-layer walls to form a corner until you enter
a new command or press <ENTER> at prompt 1 to return to the previous command.

NOTE 1: You may form a corner between two walls of any thickness and type
provided that they have the same number of layers and symmetry (direction).
NOTE 2: Do not use this command to create a corner between a linear
multi-layer wall and a multi-layer wall fillet.
