[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    MCA
    "Jazz-Internal Bus"
[LanguagesSupported]
    ENG
[Options]
    PCIMACISA
    PCIMAC/4
[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
DIGIHANDLE = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "DigiBoard"
ProductMajorVersion     = "1"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "Pcimac"
ProductSoftwareTitle    = "DigiBoard ISDN Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\pcimac.sys"
NetRuleSoftwareType     = "pcimacSys ndisDriver pcimacDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """PcimacSys"" yes no container"
NetRuleSoftwareClass    = {"pcimacDriver basic"}
NetRuleSoftwareBindable = {"pcimacDriver pcimacAdapter non exclusive 100"}
ProductHardwareName     = "Pcimac"
ProductHardwareTitle    = "DigiBoard ISDN Adapter"
NetRuleHardwareType     = "pcimac pcimacAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"pcimacAdapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
!DebugOutputControl = 1
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
                        goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
                        goto returnoptions
        else
                        set Status = STATUS_NOTSUPPORTED
                        goto finish_ReturnOptions
        endif
    else
                set Status = STATUS_NOLANGUAGE
                goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Status   = STATUS_FAILED
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    set Result = {}
    Set ActivateDetection = FALSE
    Shell $(UtilityInf), GetBusTypeNum
    set BusTypeNum = $($R1)
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set StartLabel = configureadapter
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Debug-Output "Cannot configure the PCIMAC driver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            set Error = $($R0)
            set from = end
            set to = end
            goto nonfatalinfo
        endif
    else
        set ActivateDetection = TRUE
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    Debug-Output "OEMNADDI.INF: =================================================="
    Debug-Output "OEMNADDI.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
    Debug-Output "OEMNADDI.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "OEMNADDI.INF: Option is: "$(Option)
    Debug-Output "OEMNADDI.INF: SrcDir is: "$(SrcDir)
    Debug-Output "OEMNADDI.INF: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "OEMNADDI.INF: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "OEMNADDI.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "OEMNADDI.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "OEMNADDI.INF: BusTypeNum is: "$(BusTypeNum)
    Debug-Output "OEMNADDI.INF: =================================================="
    Set DetectedCard = FALSE
    Ifstr(i) $(ActivateDetection) != TRUE
        Goto $(StartLabel)
    Endif
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
	Debug-Output "OEMNADDI.INF: KeyProduct "$(KeyProduct)
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif
	goto adapteroptions
configureadapter = +
		Debug-Output "OEMNADDI.INF: Configure Adapter"
adapteroptions = +
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
           Ifstr(i) $(DoCopy) == "YES"
              Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
              Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  Goto ShellCodeError
              Else-Ifstr(i) $($R0) == STATUS_FAILED
                  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                  ifint $($ShellCode) != $(!SHELL_CODE_OK)
                      goto ShellCodeError
                  endif
                  set Error = $($R0)
                  Goto fatal
              Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                  Goto successful
              Endif
              Set SrcDir = $($R1)
           Endif
           install "Install-Option"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
              Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
              ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
              endif
              set Error = $($R0)
              goto fatal
           endif
        endif
	endif
	Debug-Output "OEMNADDI.INF: RegBase "$(!NTN_RegBase)
	LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
	Debug-Output "OEMNADDI.INF: LIBHANDLE is "$(!LIBHANDLE)
	LoadLibrary "x" $(!STF_CWDDIR)digiinst.dll DIGIHANDLE
	Debug-Output "OEMNADDI.INF: DIGIHANDLE is "$(DIGIHANDLE)
	LibraryProcedure Result, $(DIGIHANDLE), DigiEntry, $(!STF_HWND) $(Option) $(!NTN_InstallMode) $(!NTN_RegBase) $(BusTypeNum)
	Debug-Output "OEMNADDI.INF: Dialog Result is "$(Result)
    Ifstr(i) $(Result) == Success
    	goto successful
    else-Ifstr(i) $(Result) == Cancel
		goto cancel
    else-Ifstr(i) $(Result) == Error
		goto fatal
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
		Debug-Output "OEMNADDI.INF: RegBase "$(!NTN_RegBase)
		LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
		Debug-Output "OEMNADDI.INF: LIBHANDLE is "$(!LIBHANDLE)
		LoadLibrary "x" $(!STF_CWDDIR)digiinst.dll DIGIHANDLE
		Debug-Output "OEMNADDI.INF: DIGIHANDLE is "$(DIGIHANDLE)
		LibraryProcedure Result, $(DIGIHANDLE), DigiEntry, $(!STF_HWND) $(Option) $(!NTN_InstallMode) $(!NTN_RegBase) $(BusTypeNum)
		goto end
UpgradeSoftware = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) != $(KeyNull)
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)
            Split-String $(!NTN_Infname), "\", FilenameList
            QueryListSize ListSize $(FilenameList)
            set !UG_Filename = *($(FilenameList), $(ListSize))
            install "Install-Update"
            ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                goto fatal
            endif
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
            ifint $(Version) != $(ProductVersion)
            endif
            CloseRegKey $(KeyProduct)
        else
            goto fatalregistry
        endif
    else
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
              $(MAXIMUM_ALLOWED) NetworkCardKey
        Ifstr(i) $(NetworkCardKey) != $(KeyNull)
            GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
            set ServiceName = *($(ServiceNameInfo), 4)
            OpenRegKey $(NetworkCardKey) "" "NetRules" +
                $(MAXIMUM_ALLOWED) NetRuleKey
            Ifstr(i) $(NetRuleKey) != $(KeyNull)
            else
                goto fatalregistry
            endif
            CloseRegKey $(NetRules)
            CloseRegKey $(NetworkCardKey)
        else
            goto fatalregistry
        endif
        OpenRegKey $(!REG_H_LOCAL) "" +
              $(!NTN_ServiceBase)"\"$(ServiceName) +
              $(MAXIMUM_ALLOWED) ServiceKey
        Ifstr(i) $(ServiceKey) != $(KeyNull)
            CloseRegKey $(ServiceKey)
        else
            goto fatalregistry
        endif
    endif
    goto end
successful = +
    set CommonStatus = STATUS_SUCCESSFUL
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = "Error: "$(FunctionTitle)
    set STF_MB_TEXT  = "Shell Code Error"
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto end
    endif
    goto end
cancel = +
	set CommonStatus = STATUS_USERCANCEL
	goto term
end = +
    goto term
term = +
    Return $(CommonStatus)
	exit
[DebugConfiguration]
    Set InfName = "OEMNADDI.INF"
    Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
    return
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
		AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1	= "Windows NT Advanced Server Setup Disk #1"   , TAGFILE = disk1
    2	= "Windows NT Advanced Server Setup Disk #2"   , TAGFILE = disk2
    3	= "Windows NT Advanced Server Setup Disk #3"   , TAGFILE = disk3
    4	= "Windows NT Advanced Server Setup Disk #4"   , TAGFILE = disk4
    5	= "Windows NT Advanced Server Setup Disk #5"   , TAGFILE = disk5
    6	= "Windows NT Advanced Server Setup Disk #6"   , TAGFILE = disk6
    7	= "Windows NT Advanced Server Setup Disk #7"   , TAGFILE = disk7
    8	= "Windows NT Advanced Server Setup Disk #8"   , TAGFILE = disk8
    9	= "Windows NT Advanced Server Setup Disk #9"   , TAGFILE = disk9
    10	= "Windows NT Advanced Server Setup Disk #10"  , TAGFILE = disk10
    11	= "Windows NT Advanced Server Setup Disk #11"  , TAGFILE = disk11
    12	= "Windows NT Advanced Server Setup Disk #12"  , TAGFILE = disk12
    13	= "Windows NT Advanced Server Setup Disk #13"  , TAGFILE = disk13
    14	= "Windows NT Advanced Server Setup Disk #14"  , TAGFILE = disk14
    15	= "Windows NT Advanced Server Setup Disk #15"  , TAGFILE = disk15
    16	= "Windows NT Advanced Server Setup Disk #16"  , TAGFILE = disk16
    17	= "Windows NT Advanced Server Setup Disk #17"  , TAGFILE = disk17
    18	= "Windows NT Advanced Server Setup Disk #18"  , TAGFILE = disk18
    19	= "Windows NT Advanced Server Setup Disk #19"  , TAGFILE = disk19
    20	= "Windows NT Advanced Server Setup Disk #20"  , TAGFILE = disk20
    21	= "Windows NT Advanced Server Setup Disk #21"  , TAGFILE = disk21
    22	= "Windows NT Advanced Server Setup Disk #22"  , TAGFILE = disk22
    23	= "Windows NT Advanced Server Setup Disk #23"  , TAGFILE = disk23
    24	= "Windows NT Advanced Server Setup Disk #24"  , TAGFILE = disk24
    25	= "Windows NT Advanced Server Setup Disk #25"  , TAGFILE = disk25
    26	= "Windows NT Advanced Server Setup Disk #26"  , TAGFILE = disk26
    27	= "Windows NT Advanced Server Setup Disk #27"  , TAGFILE = disk27
    28	= "Windows NT Advanced Server Setup Disk #28"  , TAGFILE = disk28
    29	= "Windows NT Advanced Server Setup Disk #29"  , TAGFILE = disk29
[ProductType]
STF_PRODUCT  = LanmanNT
STF_PLATFORM = I386
[Files-Inf]
2,	oemsetup.inf,	 SIZE=1000,	RENAME=$(!UG_Filename)
[Files-Dll]
22,DIGIINST.DLL , SIZE=36864
22,ISDN.DLL , SIZE=36864
23,ISDNHELP.HLP , SIZE=12288
[Files-PCIMAC/4]
20,IDP_XFS.BIN , SIZE=65536
14,PCIMAC.SYS , SIZE=95744
[Files-PCIMACISA]
20,IDP_XFS.BIN , SIZE=65536
14,PCIMAC.SYS , SIZE=95744
[Files-PCIMACMC]
20,IDP_XFS.BIN , SIZE=65536
14,PCIMAC.SYS , SIZE=95744
[OptionsTextENG]
    PCIMACISA     = "DigiBoard PCIMAC - ISA Adapter"
    PCIMAC/4      = "DigiBoard PCIMAC/4 Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "DigiBoard ISDN Adapter Card Setup"
ProductSoftwareDescription      = "DigiBoard ISDN Adapter Driver"
ProductHardwarePCIMACDescription        = "DigiBoard ISDN Adapter"



