[GeneralConstants]
    Radio1  = "1"
    Radio2  = "2"
    Radio3  = "3"
    Radio4  = "4"
    Radio5  = "5"
    Radio6  = "6"
    Radio7  = "7"
    Radio8  = "8"
    Radio9  = "9"
    Chosen    = "ON"
    NotChosen = "OFF"
[ProcessorID]
    ProcessorID_I386  = I386
    ProcessorID_I486  = I486
    ProcessorID_I586  = I586
    ProcessorID_R4000 = R4000
[PlatformID]
    PlatformID_I386 = I386
    PlatformID_Mips = Mips
[DebugVars]
    STF_DISPLAYDEBUGOUTPUT = 0
[ProcessorVar]
    STF_PROCESSOR = "" ? $(!LIBHANDLE) GetProcessor
[LanguageVar]
    STF_LANGUAGE   = "" ? $(!LIBHANDLE) GetLanguage
    LanguageList   = ^(LanguageID, 1)
[DestSizeVarsI386]
    MinPrimaryFree = 1
    SystemRequired = 12
    MinSystemFree  = 15
    MinPagingFile  = 20
    VirtualMinimum = 20480
    VirtualMarkup  = 12288
    MinVolumeFree  = 35
    MinHardDisk    = 40
[DestSizeVarsMips]
    MinPrimaryFree = 0
    SystemRequired = 55
    MinSystemFree  = 60
    MinPagingFile  = 20
    VirtualMinimum = 20480
    VirtualMarkup  = 12288
    MinVolumeFree  = 80
    MinHardDisk    = 100
[DriveTypeVar]
    DriveType = "" ? $(!LIBHANDLE) GetTypeOfDrive $(DriveToExamine)
[UiVars]
    BuildVersion    = "6-92"
    STF_CONTROLSET  = CurrentControlSet
    STF_INSTALLDATE = {} ? $(!LIBHANDLE) GetSystemDate
    STF_UPGRADE     = NO
    STF_PRINTSERVER = ""
    Primary         = "C:"
    STF_NTDRIVE        = ""
    STF_NTPATH         = ""
    STF_WINDOWSPATH    = "" ? $(!LIBHANDLE) GetWindowsNtDir
    STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
    STF_BUSTYPE        = "" ? $(!LIBHANDLE) GetMyBusType
    STF_UNUSEDDRIVES = {} ? $(!LIBHANDLE) GetUnusedDrives
    OrgName            = ""
    FullName           = ""
    STF_USERNAME       = ""
    STF_COMPUTERNAME   = ""
    STF_DOMAIN         = ""
    STF_DOMAIN_ROLE    = STANDALONE
    STF_NCPA_FLUSH_COPYLIST = FALSE
    SystemMemory    = "" ? $(!LIBHANDLE) GetMemorySize
    MinWinntSystemMemory    = 8000
    MinLanmanNTSystemMemory = 12096
    MinSystemMemory = ""
    DoPartial   = $(Chosen)
    DoNetwork   = $(Chosen)
    DoPrinter   = $(Chosen)
    DoAppSetup  = $(Chosen)
    STF_START_SPOOLSS = YES
    SeedMilliseconds1 = ""
    SeedMilliseconds2 = ""
    Seed              = ""
[DestPrepUiVars]
    VolumeList      = {} ? $(!LIBHANDLE) GetHardDriveLetters
    VolumeSizeList  = {} ? $(!LIBHANDLE) GetHardDriveTotalSpace
    VolumeFreeList  = {} ? $(!LIBHANDLE) GetHardDriveFreeSpace
    VolumeFSList    = {} ? $(!LIBHANDLE) GetHardDriveFileSystems
[SeedTime]
    SystimeStructure = {} ? $(!LIBHANDLE) GetSystemDate
[ConfigSysAppend]
AddOnConfig = ""
[AutoexecBatAppend]
AddOnBatch =  ""
[LoadSetupLibrary]
    LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
    exit
[FreeSetupLibrary]
    FreeLibrary $(!LIBHANDLE)
    exit
[Shell Commands]
    read-syms DebugVars
    set !DebugOutputControl = $(!STF_DISPLAYDEBUGOUTPUT)
    StartWait
    set-title "Windows NT Setup"
    install   LoadSetupLibrary
    set-subst CR = "\r"
    set-subst LF = "\n"
    set Exit_Code = $(!SETUP_ERROR_GENERAL)
    read-syms GeneralConstants
    read-syms BuiltinAccountNameVar
    read-syms LanguageVar
    detect    LanguageVar
    read-syms Billboards$(!STF_LANGUAGE)
    shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard1)
    read-syms ProcessorID
    read-syms PlatformID
    read-syms ProductType
    read-syms ProcessorVar
    detect    ProcessorVar
    ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I386)
        ifstr(i) $(STF_PLATFORM) != $(PlatformID_I386)
            shell "subroutn.inf" PopBillboard
            EndWait
            read-syms FatalError11$(STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
            StartWait
            goto setupnotdone
        endif
        set STF_PRNPLATFORM = "w32x86"
        set STF_PRNENVIRONM = "Windows NT x86"
    else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I486)
        ifstr(i) $(STF_PLATFORM) != $(PlatformID_I386)
            shell "subroutn.inf" PopBillboard
            EndWait
            read-syms FatalError11$(STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
            StartWait
            goto setupnotdone
        endif
        set STF_PRNPLATFORM = "w32x86"
        set STF_PRNENVIRONM = "Windows NT x86"
    else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I586)
        ifstr(i) $(STF_PLATFORM) != $(PlatformID_I386)
            shell "subroutn.inf" PopBillboard
            EndWait
            read-syms FatalError11$(STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
            StartWait
            goto setupnotdone
        endif
        set STF_PRNPLATFORM = "w32x86"
        set STF_PRNENVIRONM = "Windows NT x86"
    else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_R4000)
        ifstr(i) $(STF_PLATFORM) != $(PlatformID_Mips)
            shell "subroutn.inf" PopBillboard
            EndWait
            read-syms FatalError11$(STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
            StartWait
            goto setupnotdone
        endif
        set STF_PRNPLATFORM = "w32mips"
        set STF_PRNENVIRONM = "Windows NT R4000"
    else
        shell "subroutn.inf" PopBillboard
        EndWait
        read-syms FatalError1$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        goto setupnotdone
    endif
checksrcdir =+
    ifstr(i) $(STF_SRCTYPE) == "DOS"
    else-ifstr(i) $(STF_SRCTYPE) == "ARC"
        LibraryProcedure STATUS, $(!LIBHANDLE), ArcPathToDosPath $(STF_SRCDIR)
        ifstr(i) $(STATUS) == ERROR
            shell "subroutn.inf" PopBillboard
            EndWait
            read-syms FatalError18$(STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
            StartWait
            goto setupnotdone
        endif
        set STF_SRCTYPE = "DOS"
        set STF_SRCDIR  = $(STATUS)
    else-ifstr(i) $(STF_SRCTYPE) == "UNC"
        ifstr(i) $(STF_INSTALL_TYPE) == SETUPTOSHARE
        else
            read-syms FatalError14$(STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
            StartWait
            goto setupnotdone
        endif
    else
        shell "subroutn.inf" PopBillboard
        EndWait
        read-syms FatalError18$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        goto setupnotdone
    endif
    ifstr(i) $(STF_INSTALL_TYPE) == SETUPTOSHARE
         goto setuptoshare
    else-ifstr(i) $(STF_INSTALL_TYPE) == SETUPBOOTED
    else
         set STF_INSTALL_TYPE = SETUPRUN
    endif
    read-syms UiVars
    detect    UiVars
    set !STF_NTPATH = $(!STF_WINDOWSSYSPATH)
    GetDriveInPath !STF_NTDRIVE $(!STF_WINDOWSSYSPATH)
    shell "subroutn.inf" ReadSetupHelpIds
    SetHelpFile "setupnt.hlp" $(!MinimumID) $(!MaximumID) $(!InitialContentsID)
memorycheck = +
    ifstr(i) $(!STF_PRODUCT) == Winnt
        set MinSystemMemory = $(MinWinntSystemMemory)
    else
        set MinSystemMemory = $(MinLanmanNTSystemMemory)
    endif
    ifint $(SystemMemory) < $(MinSystemMemory)
        shell "subroutn.inf" PopBillboard
        EndWait
        read-syms FatalError2$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        goto setupnotdone
    endif
    ifstr(i) $(STF_INSTALL_TYPE) == "SETUPRUN"
        shell "subroutn.inf" PopBillboard
        EndWait
        read-syms FatalError6$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        goto end
    else
        ifstr(i) $(!STF_PLATFORM) == $(!PlatformID_I386)
            install Install-SetBootIniTimeout
        endif
        LibraryProcedure STATUS, $(!LIBHANDLE), InstallNetDDE
        InitRestoreDiskLog
        ifstr(i) $(STF_INSTALL_MODE) == "CUSTOM"
        else-ifstr(i) $(STF_INSTALL_MODE) == "EXPRESS"
        else
            shell "" DoInstallMode
            ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
                goto setupnotdone
            endif
            set STF_INSTALL_MODE = $($R1)
        endif
    endif
finddestination =+
    read-syms DestSizeVars$(STF_PLATFORM)
    read-syms DestPrepUiVars
    detect    DestPrepUiVars
    install Install-InitializeNTTree
    install Install-CreateNTTree
    read-syms SeedTime
    detect    SeedTime
    set SeedMilliseconds1 = *($(SystimeStructure), 8)
    shell "subroutn.inf" PopBillboard
    shell "" DoLicense
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        goto setupnotdone
    endif
    read-syms SeedTime
    detect    SeedTime
    set SeedMilliseconds2 = *($(SystimeStructure), 8)
    set-sub Seed = $(SeedMilliseconds2) $(SeedMilliseconds1)
    shell "" DoComputerName
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        goto setupnotdone
    else
        set STF_COMPUTERNAME = $($R1)
    endif
    shell "hardware.inf"  InitialHardwareInstall
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        goto setupnotdone
    endif
    set HardwareConfigureOptions = $($R1)
    install Install-System-Files
    shell "" DoOptions
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        goto setupnotdone
    endif
    shell "partial.inf" DoProgmanComponents
    StartWait
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        goto setupnotdone
    endif
    set ProgmanComponents = $($R1)
printersetup = +
    ifstr(i) $(DoPrinter) == $(Chosen)
        shell "prnsetup.inf" DoPrinterSetup
        StartWait
        ifstr(i) $($R0) == "STATUS_SUCCESSFUL"
            set PrintersToConfigure = $($R1)
        else-ifstr(i) $($R0) == "STATUS_USERCANCEL"
            set PrintersToConfigure = {}
        else-ifstr(i) $($R0) == "STATUS_USERQUIT"
            goto setupnotdone
        else
            EndWait
            read-syms NonFatalError4$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
            StartWait
            set PrintersToConfigure = {}
        endif
    endif
settingaccountdomainsid = +
    ifstr(i) $(!STF_DOS_SETUP) == "YES"
        set SourcePath = "A:\"
    else
        set SourcePath = $(!STF_SRCDIR)
    endif
    shell "registry.inf" WinNTKeyCreate {$(!STF_WINDOWSPATH), SYSTEM, $(!FullName), $(!OrgName), $(!STF_INSTALLDATE), $(!STF_PRODUCT), $(SourcePath)}
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        EndWait
        read-syms FatalError5$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        Debug-Output "SETUP.INF: Shelling WinNTEntryCreate failed"
        goto setupnotdone
    endif
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        EndWait
        read-syms FatalError5$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        Debug-Output "SETUP.INF: Creating Software Entry for WinNT Failed"
        goto setupnotdone
    endif
    LibraryProcedure STATUS, $(!LIBHANDLE), SetAccountDomainSid $(Seed) $(!STF_COMPUTERNAME)
    ifstr(i) $(STATUS) == ERROR
        EndWait
        read-syms FatalError9$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        goto setupnotdone
    endif
    LibraryProcedure STATUS, $(!LIBHANDLE), SetMyComputerName $(!STF_COMPUTERNAME)
    ifstr(i) $(STATUS) == "ERROR"
        EndWait
        read-syms FatalError4$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        Debug-Output "SETUP.INF: Setting ComputerName Value Entry Failed"
        goto setupnotdone
    endif
    LibraryProcedure STATUS, $(!LIBHANDLE), CreateSamEvent
    Debug-Output "SETUP.INF: CreateSamEvent returned: "$(STATUS)
ntlanman = +
    ifstr(i) $(DoNetwork) == $(!Chosen)
        EndWait
        shell "ntlanman.inf" DoNetwork
        StartWait
        ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
            Debug-Output "SETUP.INF: Network inf returned: "$($R0)
            set !DoNetwork = $(!NotChosen)
            ifstr(i) $(!STF_PRODUCT) == "LanmanNT"
                goto setupnotdone
            endif
        endif
        set-title "Windows NT Setup"
    endif
signallsa = +
    set !DebugOutputControl = $(!STF_DISPLAYDEBUGOUTPUT)
    LibraryProcedure STATUS, $(!LIBHANDLE), SignalLsaEvent
    Debug-Output "SETUP.INF: SignalLsaEvent returned: "$(STATUS)
finish = +
    read-syms ProgressCopy$(STF_LANGUAGE)
    EndWait
    ifstr(i) $(DoNetwork) != $(!Chosen)
        Shell "" ControlBitmaps START
    Endif
    install Install-All-Files-Now
    ifstr(i) $(DoNetwork) != $(!Chosen)
        Shell "" ControlBitmaps STOP
    Endif
    StartWait
    ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
        goto setupnotdone
    endif
startspooler =+
    ifstr(i) $(!STF_START_SPOOLSS) == "YES"
        StartDetachedProcess STATUS "" "" $(!STF_WINDOWSSYSPATH)"\spoolss.exe"
        ifstr(i) $(STATUS) == "ERROR"
            set SpoolerStarted = FALSE
        else
            set SpoolerStarted = TRUE
        endif
    else
        set SpoolerStarted = TRUE
    endif
iniconfig =+
    shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard3)
    shell "hardware.inf" ConfigureHardwareOptions $(HardwareConfigureOptions)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        read-syms FatalError3$(STF_LANGUAGE)
        shell "subroutn.inf" PopBillboard
        EndWait
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        Debug-Output "SETUP.INF: Execing Configuring hardware options failed"
        StartWait
        goto setupnotdone
    endif
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        EndWait
        shell "subroutn.inf" PopBillboard
        read-syms FatalError3$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        Debug-Output "SETUP.INF: Configuring hardware options failed"
        goto setupnotdone
    endif
    shell "subroutn.inf" PopBillboard
    shell   "partial.inf" ConfigureProgman $(ProgmanComponents)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "SETUP.INF: Shelling ConfigureProgman failed"
        goto setupnotdone
    endif
    shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard4)
    Debug-Output "SETUP.INF: Setting temp variable to: "$(!STF_TEMPPATH)
    LibraryProcedure STATUS, $(!LIBHANDLE), SetEnvVar USER "tmp"  "0" $(!REG_VT_SZ) $(!STF_TEMPPATH)
    LibraryProcedure STATUS, $(!LIBHANDLE), SetEnvVar USER "temp" "0" $(!REG_VT_SZ) $(!STF_TEMPPATH)
    shell "registry.inf" ModifyServicesEntry "ClipSrv"    $(!SERVICE_AUTO_START)
    shell "registry.inf" ModifyServicesEntry "NetDDE"     $(!SERVICE_AUTO_START)
    shell "registry.inf" ModifyServicesEntry "NetDDEdsdm" $(!SERVICE_AUTO_START)
    Debug-Output "SETUP.INF: Setting EventLog entry to autostart."
    shell "registry.inf" ModifyServicesEntry "Eventlog" $(!SERVICE_AUTO_START)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        shell "subroutn.inf" PopBillboard
        EndWait
        Debug-Output "SETUP.INF: Shelling ModifyServicesEntry on eventlog failed"
        read-syms NonFatalError12$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) NONFATAL $(NonFatal)
        StartWait
    else-ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        shell "subroutn.inf" PopBillboard
        EndWait
        Debug-Output "SETUP.INF: Couldn't modify services entry for eventlog"
        read-syms NonFatalError12$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) NONFATAL $(NonFatal)
        StartWait
    endif
vdmconfig =+
    shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard5)
    Debug-Output "SETUP.INF: Configuring the DOS Subsystem."
    ifstr(i) $(!STF_WIN31UPGRADE) == NO
        shell "registry.inf" AppendToSystemPath "%SystemRoot%"
    endif
    read-syms ConfigSysAppend
    read-syms AutoexecBatAppend
    LibraryProcedure STATUS,$(!LIBHANDLE),VdmFixup $(AddOnConfig) $(AddOnBatch)
    ifstr(i) $(STATUS) == ERROR
        shell "subroutn.inf" PopBillboard
        EndWait
        read-syms NonFatalError2$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) NONFATAL $(NonFatal)
        StartWait
    endif
    ifstr(i) $(!STF_PLATFORM) == $(!PlatformID_Mips)
        set wowfile = krnl286
    else
        set wowfile = krnl386
    endif
    shell "registry.inf" MakeWOWEntry $(wowfile)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        shell "subroutn.inf" PopBillboard
        EndWait
        read-syms NonFatalError13$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) NONFATAL $(NonFatal)
        StartWait
    else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
        shell "subroutn.inf" PopBillboard
        EndWait
        read-syms NonFatalError13$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) NONFATAL $(NonFatal)
        StartWait
    endif
printerconfig=+
    read-syms PrintMonitorName
    LibraryProcedure STATUS,$(!LIBHANDLE),MiscSpoolerInit $(MonitorName)
    ifstr(i) $(DoPrinter) == $(Chosen)
        shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard7)
        Debug-Output "SETUP.INF: Configuring printers."
        ifstr(i) $(SpoolerStarted) == "FALSE"
            shell "subroutn.inf" PopBillboard
            EndWait
            read-syms NonFatalError9$(STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "NONFATAL" $(NonFatal)
            StartWait
        else
            shell "prnsetup.inf" DoPrinterConfigure $(PrintersToConfigure)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                shell "subroutn.inf" PopBillboard
                Debug-Output "SETUP.INF: shelling Printer Config Failed"
                goto setupnotdone
            else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
                shell "subroutn.inf" PopBillboard
                EndWait
                read-syms NonFatalError8$(STF_LANGUAGE)
                shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "NONFATAL" $(NonFatal)
                StartWait
            endif
        endif
    endif
setuplocalaccount=+
    shell "subroutn.inf" PushBillboard STATUSDLG ""
    shell "subroutn.inf" PopBillboard
    set SetAdminPassword = YES
    ifstr(i) $(!STF_PRODUCT) == "LanmanNT"
        ifstr(i) $(!STF_DOMAIN_ROLE) != DC
            set SetAdminPassword = NO
        endif
    endif
    ifstr(i) $(SetAdminPassword) == YES
        shell "" DoAdminAccountSetup
        ifstr(i) $($R0) == STATUS_SUCCESSFUL
            set !STF_ADMIN_PASSWORD = $($R1)
        else
            set !STF_ADMIN_PASSWORD = ""
        endif
    endif
    set MakeUserAccount  = NO
    ifstr(i) $(!STF_PRODUCT) == "WinNT"
        ifstr(i) $(!STF_DOMAIN_ROLE) == STANDALONE
            shell "" DoAccountSetup
            ifstr(i) $($R0) == STATUS_SUCCESSFUL
                set !STF_USERNAME = $($R1)
                set !STF_PASSWORD = $($R2)
                set MakeUserAccount = YES
            else-ifstr(i) $($R0) == STATUS_USERCANCEL
            endif
        endif
    endif
    shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard8)
    WaitOnEvent STATUS, "\SAM_SERVICE_STARTED", 0
    Debug-Output "SETUP.INF: WaitOnEvent returned: "$(STATUS)
    ifstr(i) $(SetAdminPassword) == YES
        LibraryProcedure STATUS, $(!LIBHANDLE), ChangeLocalUserPassword $(AdminAccountName) "" $(!STF_ADMIN_PASSWORD)
        Debug-Output "SETUP.INF: ChangeUserPassword for Administrator returned: "$(STATUS)
    endif
    ifstr(i) $(MakeUserAccount) == "YES"
        Debug-Output "SETUP.INF: Setting up a local account."
        LibraryProcedure STATUS, $(!LIBHANDLE), AddLocalUserAccount $(!STF_USERNAME) $(!STF_PASSWORD)
    endif
    Ifstr(i) $(STF_PRODUCT) == "LanmanNT"
        Ifstr(i) $(!STF_DOMAIN_ROLE) == "DC"
            Debug-Output "SETUP.INF: AddPdcMachineAccount for PDC of new domain..."
            LibraryProcedure STATUS, $(!LIBHANDLE), AddPdcMachineAccount $(!STF_COMPUTERNAME)
            Debug-Output "SETUP.INF: AddPdcMachineAccount returned: "$(STATUS)
        Endif
        shell "registry.inf" MakeQuotaEntries 48 24
    Endif
    install Install-Win-Ini-Alter
    shell "subroutn.inf" PopBillboard
    shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard11)
    install Install-SetFonts
    shell "subroutn.inf" PopBillboard
setaclsonfiles=+
    Debug-Output "SETUP.INF: Setting up for conversion and setacl if necessary."
    set Fs_C     = *($(VolumeFSList), ~($(VolumeList), $(Primary)))
    set Fs_Winnt = *($(VolumeFSList), ~($(VolumeList), $(!STF_NTDRIVE)))
    shell "" SetAcls $(!STF_CONVERT_C) $(!STF_CONVERT_WINNT) $(Fs_C) $(Fs_Winnt)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "SETUP.INF: Shelling SetAcls failed"
        goto setupnotdone
    else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
        EndWait
        read-syms FatalError10$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        goto setupnotdone
    endif
virtual_config = +
    set ConfigurePagingFiles = YES
    shell "virtual.inf" DoVirtual
    StartWait
    ifstr(i) $($R0) == "STATUS_SUCCESSFUL"
        set OldPagingFiles = $($R1)
        set NewPagingFiles = $($R2)
    else
        EndWait
        read-syms NonFatalError3$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
        StartWait
        set ConfigurePagingFiles = NO
    endif
    Debug-Output "SETUP.INF: Setting paging files."
    ifstr(i) $(ConfigurePagingFiles) == "YES"
        shell "virtual.inf" ConfigureVirtual $(OldPagingFiles) $(NewPagingFiles)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "SETUP.INF: Shelling ConfigureVirtual failed"
            read-syms NonFatalError6$(STF_LANGUAGE)
            EndWait
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "NONFATAL" $(NonFatal)
            StartWait
        else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
            EndWait
            read-syms NonFatalError6$(STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "NONFATAL" $(NonFatal)
            StartWait
        endif
    endif
appsetup =+
    ifstr(i) $(DoAppSetup) == $(Chosen)
        shell "app.inf", "DoAppSearch"
        StartWait
    endif
    shell "registry.inf" ResetSetupProgressValue
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        EndWait
        read-syms FatalError13$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        goto setupnotdone
    else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
        EndWait
        read-syms FatalError13$(STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(STF_LANGUAGE) "FATAL" $(Fatal)
        StartWait
        goto setupnotdone
    endif
gogmt =+
    EndWait
    read-syms DateTime$(!STF_LANGUAGE)
    RunProgram STATUS "" "" $(!STF_WINDOWSSYSPATH)"\control.exe" main.cpl $(Applet) setup
    StartWait
emergency =+
    EndWait
    shell "repair.inf" "CreateRepairDiskette"
    StartWait
cleaninfs =+
    ForListDo {prnsetup.inf, repair.inf, virtual.inf}
    EndForListDo
    ifstr(i) $(!STF_DOS_SETUP) == "YES"
        shell "subroutn.inf" PushBillboard STATUSDLG $(Billboard10)
        LibraryProcedure STATUS, $(!LIBHANDLE), Delnode $(!STF_SRCDIR)
        shell "subroutn.inf" PopBillboard
    endif
    LibraryProcedure STATUS,$(!LIBHANDLE), SaveHive $(!REG_H_USERS) ".DEFAULT" $(!STF_CONFIGPATH)"\UserDef"
    ifstr(i) $(STATUS) != SUCCESS
        read-syms FatalError12$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) FATAL $(Fatal)
        goto setupnotdone
    endif
    install Install-ScreenSaver
setupdone =+
    EndWait
    set Exit_Code = $(!SETUP_ERROR_SUCCESS)
    read-syms SetupDoneDlg$(STF_LANGUAGE)
    ui start "SetupDone"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ui pop 1
        goto rebootend
    else
        ui pop 1
        goto end
    endif
setupnotdone =+
    EndWait
    read-syms SetupNotDoneDlg$(STF_LANGUAGE)
    ui start "SetupNotDone"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ui pop 1
        goto rebootend
    else
        ui pop 1
        goto end
    endif
rebootend =+
    set Reboot = YES
    install   Install-Shutdown
end =+
    install   FreeSetupLibrary
    exit
upgradenotdone = +
    EndWait
    read-syms SetupNotDoneRestartDlg$(STF_LANGUAGE)
    ui start "SetupNotDone"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ui pop 1
        goto end
    else
        goto end
    endif
setuptoshare = +
    shell "filelist.inf" SetupToShare
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "SETUP.INF: shelling filelist.inf Failed"
        goto setuptosharenotdone
    endif
    ifstr(i) $($R0) != STATUS_SUCCESSFUL
        goto setuptosharenotdone
    endif
setuptosharedone = +
    set Exit_Code = $(!SETUP_ERROR_SUCCESS)
    read-syms SetupDoneRestartDlg$(STF_LANGUAGE)
    EndWait
    ui start "SetupDone"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ui pop 1
        goto end
    else
        goto end
    endif
setuptosharenotdone = +
    read-syms SetupNotDoneRestartDlg$(STF_LANGUAGE)
    EndWait
    ui start "SetupNotDone"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ui pop 1
        goto end
    else
        goto end
    endif
[Install-InitializeNTTree]
    set STF_VITAL = ""
    set !STF_CONFIGPATH    = $(!STF_WINDOWSSYSPATH)\config
    set !STF_DRIVERPATH    = $(!STF_WINDOWSSYSPATH)\drivers
    set !STF_WINSPOOLPATH  = $(!STF_WINDOWSSYSPATH)\spool
    set !STF_PRNDRIVERPATH = $(!STF_WINSPOOLPATH)\drivers\$(!STF_PRNPLATFORM)
    set !STF_PRNPROCPATH   = $(!STF_WINSPOOLPATH)\prtprocs\$(!STF_PRNPLATFORM)
    set !STF_TEMPPATH      = $(!STF_NTDRIVE)\temp
    set !STF_USERPATH      = $(!STF_NTDRIVE)\users
    set !STF_APPPATH       = $(!STF_NTDRIVE)\win32app
    set !STF_OS2PATH       = $(!STF_WINDOWSSYSPATH)\os2
    set !STF_OS2SYSPATH    = $(!STF_WINDOWSSYSPATH)\os2\dll
    exit
[Install-CreateNTTree]
    set STF_VITAL = ""
    CreateDir  $(!STF_WINDOWSPATH)
    CreateDir  $(!STF_WINDOWSPATH)\system
    CreateDir  $(!STF_WINDOWSSYSPATH)
    CreateDir  $(!STF_TEMPPATH)
    CreateDir  $(!STF_USERPATH)
    CreateDir  $(!STF_USERPATH)"\default"
    CreateDir  $(!STF_APPPATH)
    CreateDir  $(!STF_CONFIGPATH)
    CreateDir  $(!STF_DRIVERPATH)
    ifstr(i) $(!STF_PLATFORM) == $(!PlatformID_I386)
        CreateDir  $(!STF_OS2PATH)
        CreateDir  $(!STF_OS2SYSPATH)
    endif
    CreateDir  $(!STF_WINSPOOLPATH)
    CreateDir  $(!STF_WINSPOOLPATH)\drivers
    CreateDir  $(!STF_WINSPOOLPATH)\drivers\$(!STF_PRNPLATFORM)
    CreateDir  $(!STF_WINSPOOLPATH)\prtprocs
    CreateDir  $(!STF_WINSPOOLPATH)\prtprocs\$(!STF_PRNPLATFORM)
    exit
[Install-System-Files]
    set STF_VITAL = ""
    AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt                     $(!STF_SRCDIR)       $(!STF_WINDOWSPATH)
    AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt-system              $(!STF_SRCDIR)       $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt-system-drivers	    $(!STF_SRCDIR)	 $(!STF_DRIVERPATH)
    AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt-system16always	    $(!STF_SRCDIR)	 $(!STF_WINDOWSPATH)\system
    ifstr(i) $(!STF_WIN31UPGRADE) == NO
        AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt-compatibility  $(!STF_SRCDIR)       $(!STF_WINDOWSPATH)
        AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt-system16       $(!STF_SRCDIR)       $(!STF_WINDOWSPATH)\system
    endif
    ifstr(i) $(!STF_PLATFORM) == $(!PlatformID_I386)
        AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt-system-os2      $(!STF_SRCDIR)      $(!STF_OS2PATH)
        AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt-system-os2-dll  $(!STF_SRCDIR)      $(!STF_OS2SYSPATH)
    endif
    AddSectionFilesToCopyList Files-$(!STF_PLATFORM)-nt-system-spool-prtprocs-winprint +
                              $(!STF_SRCDIR) +
                              $(!STF_PRNPROCPATH)
    exit
[Install-All-Files-Now]
    ifstr(i) $(STF_NCPA_FLUSH_COPYLIST) == FALSE
        CopyFilesInCopyList
    endif
    exit
[Install-Win-Ini-Alter]
ReplaceIniKeyValue "Win.ini", Winlogon, DefaultUserName, $(!STF_USERNAME)
ReplaceIniKeyValue "Win.ini", Winlogon, DebugServerCommand, "no"
ReplaceIniKeyValue "Win.ini", DeskTop,  Wallpaper, $(!STF_PRODUCT)".bmp"
exit
[Install-SetFonts]
ForListDo ^(FontList,0)
    ReplaceIniKeyValue "Win.ini", Fonts, $($), #(FontList,$($),1)
EndForListDo
ForListDo ^(FontListE,0)
    ReplaceIniKeyValue "Win.ini", Fonts, $($), #(FontListE,$($),1)
EndForListDo
exit
[Install-SeeIfFileIsPresent]
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FileToCheck)
exit
[Install-Shutdown]
LibraryProcedure STATUS,$(!LIBHANDLE),ShutdownSystem $(Reboot)
exit
[Install-IsValidNetName]
LibraryProcedure STATUS,$(!LIBHANDLE),NetNameCheck $(Name)
exit
[Install-SetBootIniTimeout]
ChangeBootIniTimeout 30
exit
[Install-ScreenSaver]
ReplaceIniKeyValue "Win.ini", DeskTop, ScreenSaveActive, 1
ReplaceIniKeyValue "Win.ini", DeskTop, SCRNSAVE.EXE, $(STF_WINDOWSSYSPATH)\logon.scr
exit
[DoLanguage]
    Return STATUS_FAILED
[DoLicense]
    set Status   = STATUS_FAILED
license =+
    ifstr(i) $(!OrgName) != ""
        goto fullname
    else
        goto fullnameorgname
    endif
fullname = +
    read-syms QueryFullNameDlg$(!STF_LANGUAGE)
    EndWait
    ui start "QueryName"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ifstr(i) $(EditTextOut) == ""
            read-syms NonFatalError1$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) NONFATAL $(NonFatal)
            goto fullname
        else
            ui pop 1
            set !FullName = $(EditTextOut)
            goto verifyfullname
        endif
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "subroutn.inf" QueryUserQuit $(!STF_LANGUAGE)
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERQUIT
            ui pop 1
            goto finish_license
        else
            goto fullname
        endif
    else
        ui pop 1
        goto finish_license
    endif
verifyfullname = +
    read-syms VerifyFullNameDlg$(!STF_LANGUAGE)
    ui start "VerifyName"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set Status = STATUS_SUCCESSFUL
        ui pop 1
        goto finish_license
    else-ifstr(i) $(DLGEVENT) == "BACK"
        ui pop 1
        goto fullname
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "subroutn.inf" QueryUserQuit $(!STF_LANGUAGE)
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERQUIT
            ui pop 1
            goto finish_license
        else
            goto verifyfullname
        endif
    else
        ui pop 1
        goto finish_license
    endif
fullnameorgname = +
   read-syms QueryFullNameOrgNameDlg$(!STF_LANGUAGE)
   EndWait
   ui start "QueryName"
   ifstr(i) $(DLGEVENT) == "CONTINUE"
        ifstr(i) *($(EditTextOut), 1) == ""
            read-syms NonFatalError1$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
            set ReInit = NO
            goto fullnameorgname
        else
            ui pop 1
            set !FullName = *($(EditTextOut),1)
            set !OrgName  = *($(EditTextOut),2)
            goto verifyfullnameorgname
        endif
   else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "subroutn.inf" QueryUserQuit $(!STF_LANGUAGE)
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERQUIT
            ui pop 1
            goto finish_license
        else
            set ReInit = NO
            goto fullnameorgname
        endif
   else
        ui pop 1
        goto finish_license
   endif
verifyfullnameorgname = +
    read-syms VerifyFullNameOrgNameDlg$(!STF_LANGUAGE)
    ui start "VerifyName"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set Status = STATUS_SUCCESSFUL
        ui pop 1
        goto finish_license
    else-ifstr(i) $(DLGEVENT) == "BACK"
        ui pop 1
        goto fullnameorgname
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "subroutn.inf" QueryUserQuit $(!STF_LANGUAGE)
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERQUIT
            ui pop 1
            goto finish_license
        else
            goto verifyfullnameorgname
        endif
    else
        ui pop 1
        goto finish_license
    endif
finish_license = +
    StartWait
    Return $(Status)
[DoComputerName]
    set Status       = STATUS_FAILED
    set ComputerName = ""
computername = +
    ifstr(i) $(!STF_PRODUCT) == Winnt
        read-syms QueryComputerNameDlg$(!STF_LANGUAGE)
    else
        read-syms QueryComputerNameDlgAS$(!STF_LANGUAGE)
    endif
    EndWait
    ui start "QueryComputerName"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ifstr(i) $(EditTextOut) == ""
            read-syms NonFatalError5$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) NONFATAL $(NonFatal)
            goto computername
        else
            set Name = *($(EditTextOut), 1)
            ifstr(i) $(Name) == "."
                read-syms NonFatalError7$(!STF_LANGUAGE)
                shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
                goto computername
            else-ifstr(i) $(Name) == ".."
                read-syms NonFatalError7$(!STF_LANGUAGE)
                shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
                goto computername
            endif
            install Install-IsValidNetName
            ifstr(i) $(STATUS) == NO
                read-syms NonFatalError7a$(!STF_LANGUAGE)
                shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
                goto computername
            else
                ui pop 1
                set ComputerName = $(EditTextOut)
                goto verifycomputername
            endif
        endif
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "subroutn.inf" QueryUserQuit $(!STF_LANGUAGE)
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERQUIT
            ui pop 1
            goto finish_docomputername
        else
            goto computername
        endif
    else
        ui pop 1
        goto finish_docomputername
    endif
verifycomputername = +
    read-syms VerifyComputerNameDlg$(!STF_LANGUAGE)
    ui start "VerifyComputerName"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set Status = STATUS_SUCCESSFUL
        ui pop 1
        goto finish_docomputername
    else-ifstr(i) $(DLGEVENT) == "BACK"
        ui pop 1
        goto computername
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "subroutn.inf" QueryUserQuit $(!STF_LANGUAGE)
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERQUIT
            ui pop 1
            goto finish_docomputername
        else
            goto verifycomputername
        endif
    else
        ui pop 1
        goto finish_docomputername
    endif
finish_docomputername = +
    StartWait
    Return $(Status) $(ComputerName)
[DoAccountSetup]
    set Status   = STATUS_FAILED
    set Password = ""
    set Username = ""
account= +
    read-syms AccountDlg$(!STF_LANGUAGE)
    EndWait
    ui start "QueryAccount"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ifstr(i) *($(EditTextOut), 1) == ""
            read-syms NonFatalError15$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
            set ReInit = NO
            goto account
        endif
        set Name = *($(EditTextOut), 1)
        ifstr(i) $(Name) == $(!AdminAccountName)
            read-syms NonFatalError16$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
            set ReInit = YES
            goto account
        else-ifstr(i) $(Name) == $(!GuestAccountName)
            read-syms NonFatalError16$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
            set ReInit = YES
            goto account
        endif
        install Install-IsValidNetName
        ifstr(i) $(STATUS) == NO
            read-syms NonFatalError14$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
            set ReInit = NO
            goto account
        endif
        set Username = *($(EditTextOut), 1)
        ifstr *($(EditTextOut), 2) == *($(EditTextOut), 3)
            ifstr(i) *($(EditTextOut), 2) == ""
                read-syms Warning3$(!STF_LANGUAGE)
                shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(Warning)
                ifstr(i) $($R0) != STATUS_SUCCESSFUL
                else
                    ifstr(i) $($R1) == "OK"
                    else
                        set ReInit = NO
                        goto account
                    endif
                endif
            endif
            set Password = *($(EditTextOut), 2)
            ui pop 1
            set Status = STATUS_SUCCESSFUL
            goto finish_account
        else
            read-syms NonFatalError10$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
            set DefEditCtl = 1
            set ReInit = YES
            goto account
        endif
    else-ifstr(i) $(DLGEVENT) == "BACK"
        read-syms Warning2$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(Warning)
        ifstr(i) $($R0) != STATUS_SUCCESSFUL
            ui pop 1
            set Status = STATUS_USERCANCEL
            goto finish_account
        endif
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERCANCEL
            ui pop 1
            goto finish_account
        else
            set ReInit = NO
            goto account
        endif
    else
        ui pop 1
        goto finish_account
    endif
finish_account = +
    StartWait
    Return $(Status) $(Username) $(Password)
[DoAdminAccountSetup]
    set Status   = STATUS_SUCCESSFUL
    set Password = ""
admin_account= +
    read-syms AdminAccountDlg$(!STF_LANGUAGE)
    EndWait
    ui start "QueryAdminAccount"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        ifstr *($(EditTextOut), 1) == *($(EditTextOut), 2)
            ifstr(i) *($(EditTextOut), 1) == ""
                read-syms Warning3$(!STF_LANGUAGE)
                shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(Warning)
                ifstr(i) $($R0) != STATUS_SUCCESSFUL
                else
                    ifstr(i) $($R1) == "OK"
                    else
                        set ReInit = NO
                        goto admin_account
                    endif
                endif
            endif
            set Password = *($(EditTextOut), 1)
            ui pop 1
            set Status = STATUS_SUCCESSFUL
            goto finish_admin_account
        else
            read-syms NonFatalError10$(!STF_LANGUAGE)
            shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(NonFatal)
            set DefEditCtl = 0
            set ReInit = YES
            goto admin_account
        endif
    else
        ui pop 1
        goto finish_admin_account
    endif
finish_admin_account = +
    StartWait
    Return $(Status) $(Password)
[DoInstallMode]
    set Status = STATUS_FAILED
    read-syms InstallModeConstants
    set InstallMode     = "CUSTOM"
    set InteractDefault = $(MaxInteract)
queryinstallmode = +
    read-syms InstallModeDlg$(!STF_LANGUAGE)
    EndWait
    ui start "InstallMode"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set Status = STATUS_SUCCESSFUL
        ui pop 1
        ifstr(i) $(ButtonChecked) == $(MinInteract)
            set InstallMode = EXPRESS
        else
            set InstallMode = CUSTOM
        endif
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "subroutn.inf" QueryUserQuit $(!STF_LANGUAGE)
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERQUIT
            ui pop 1
        else
            goto queryinstallmode
        endif
    else
        ui pop 1
    endif
    StartWait
    Return $(Status) $(InstallMode)
[InstallModeConstants]
    MinInteract        = "1"
    MaxInteract        = "2"
[DoOptions]
    set Status = STATUS_FAILED
options = +
    ifstr(i) $(!STF_PRODUCT) == Winnt
        set OptionsGreyed = {}
    else
        set OptionsGreyed = {3}
    endif
    ifstr(i) $(!STF_WIN31UPGRADE) == "YES"
        set !DoAppSetup = $(!NotChosen)
        set OptionsGreyed = >($(OptionsGreyed), 4)
    endif
    ifstr(i) $(!STF_INSTALL_MODE) == EXPRESS
        set Status = STATUS_SUCCESSFUL
        goto finish_options
    endif
    read-syms OptionsDlg$(!STF_LANGUAGE)
    EndWait
    ui start "Options"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set !DoPartial   = *($(CheckItemsOut), "1")
        set !DoPrinter   = *($(CheckItemsOut), "2")
        set !DoNetwork   = *($(CheckItemsOut), "3")
        set !DoAppSetup  = *($(CheckItemsOut), "4")
        ui pop 1
        set Status = STATUS_SUCCESSFUL
        goto finish_options
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        shell "subroutn.inf" QueryUserQuit $(!STF_LANGUAGE)
        ifstr(i) $($R1) == "OK"
            set Status = STATUS_USERQUIT
            ui pop 1
            goto finish_options
        else
            goto options
        endif
    else
        ui pop 1
        goto finish_options
    endif
finish_options = +
    StartWait
    Return $(Status)
[SetAcls]
    set Status = STATUS_FAILED
    set Convert_C     = $($0)
    set Convert_Winnt = $($1)
    set Fs_C          = $($2)
    set Fs_Winnt      = $($3)
    set AutoLines = {}
    set SetAcl_C = NO
    set SetAcl_Winnt = NO
    ifstr(i) $(Convert_C) == YES
        set AutoLines   = >($(AutoLines), "autoconv \DosDevices\C: /fs:NTFS")
        set SetAcl_C = YES
    endif
    ifstr(i) $(Convert_Winnt) == YES
        set AutoLines   = >($(AutoLines), "autoconv \DosDevices\"$(!STF_NTDRIVE)" /fs:NTFS")
        set SetAcl_Winnt = YES
    endif
    ifstr(i) $(SetAcl_C) == NO
        ifstr(i) $(Fs_C) == NTFS
            set SetAcl_C =  YES
        endif
    endif
    ifstr(i) $(SetAcl_Winnt) == NO
        ifstr(i) $(Fs_Winnt) == NTFS
            set SetAcl_Winnt =  YES
        endif
    endif
    ifstr(i) $(SetAcl_C) == YES
        ifstr(i) $(SetAcl_Winnt) == YES
            set AutoLines = >($(AutoLines), "setacl /a \DosDevices\"$(!STF_WINDOWSSYSPATH)"\winperms.txt \DosDevices\"$(!STF_NTDRIVE))
        else
            set AutoLines = >($(AutoLines), "setacl /c \DosDevices\"$(!STF_WINDOWSSYSPATH)"\winperms.txt")
        endif
    else-ifstr(i) $(SetAcl_Winnt) == YES
        set AutoLines = >($(AutoLines), "setacl /w \DosDevices\"$(!STF_WINDOWSSYSPATH)"\winperms.txt \DosDevices\"$(!STF_NTDRIVE))
    endif
    shell "registry.inf" AppendToBootExecute $(AutoLines)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "SETUP.INF: Shelling AppendToBootExecute failed"
        goto finish_setacls
    endif
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        Debug-Output "SETUP.INF: AppendToBootExecute failed"
        goto finish_setacls
    endif
    set Status = STATUS_SUCCESSFUL
finish_setacls = +
    Return $(Status)
[ControlBitmaps]
    Ifstr(i) $($0) == START
        Ifstr(i) $(!STF_PRODUCT) == "LANMANNT"
            Set BmpList = {305,303,311,309,301,308}
        Else
            Set BmpList = {305,302,306,310,304,307}
        Endif
        BmpShow 1 5 15 $(BmpList)
        Set !STF_DLG_PRO_CTR_X = 70
        Set !STF_DLG_PRO_CTR_Y = 75
    Else
        BmpHide
        Set !STF_DLG_PRO_CTR_X = 50
        Set !STF_DLG_PRO_CTR_Y = 50
    Endif
    return
[Source Media Descriptions]
    1	= "Windows NT Advanced Server Setup Disk #1"   , TAGFILE = disk1
    2	= "Windows NT Advanced Server Setup Disk #2"   , TAGFILE = disk2
    3	= "Windows NT Advanced Server Setup Disk #3"   , TAGFILE = disk3
    4	= "Windows NT Advanced Server Setup Disk #4"   , TAGFILE = disk4
    5	= "Windows NT Advanced Server Setup Disk #5"   , TAGFILE = disk5
    6	= "Windows NT Advanced Server Setup Disk #6"   , TAGFILE = disk6
    7	= "Windows NT Advanced Server Setup Disk #7"   , TAGFILE = disk7
    8	= "Windows NT Advanced Server Setup Disk #8"   , TAGFILE = disk8
    9	= "Windows NT Advanced Server Setup Disk #9"   , TAGFILE = disk9
    10	= "Windows NT Advanced Server Setup Disk #10"  , TAGFILE = disk10
    11	= "Windows NT Advanced Server Setup Disk #11"  , TAGFILE = disk11
    12	= "Windows NT Advanced Server Setup Disk #12"  , TAGFILE = disk12
    13	= "Windows NT Advanced Server Setup Disk #13"  , TAGFILE = disk13
    14	= "Windows NT Advanced Server Setup Disk #14"  , TAGFILE = disk14
    15	= "Windows NT Advanced Server Setup Disk #15"  , TAGFILE = disk15
    16	= "Windows NT Advanced Server Setup Disk #16"  , TAGFILE = disk16
    17	= "Windows NT Advanced Server Setup Disk #17"  , TAGFILE = disk17
    18	= "Windows NT Advanced Server Setup Disk #18"  , TAGFILE = disk18
    19	= "Windows NT Advanced Server Setup Disk #19"  , TAGFILE = disk19
    20	= "Windows NT Advanced Server Setup Disk #20"  , TAGFILE = disk20
    21	= "Windows NT Advanced Server Setup Disk #21"  , TAGFILE = disk21
    22	= "Windows NT Advanced Server Setup Disk #22"  , TAGFILE = disk22
    23	= "Windows NT Advanced Server Setup Disk #23"  , TAGFILE = disk23
    24	= "Windows NT Advanced Server Setup Disk #24"  , TAGFILE = disk24
    25	= "Windows NT Advanced Server Setup Disk #25"  , TAGFILE = disk25
    26	= "Windows NT Advanced Server Setup Disk #26"  , TAGFILE = disk26
    27	= "Windows NT Advanced Server Setup Disk #27"  , TAGFILE = disk27
    28	= "Windows NT Advanced Server Setup Disk #28"  , TAGFILE = disk28
    29	= "Windows NT Advanced Server Setup Disk #29"  , TAGFILE = disk29
[ProductType]
STF_PRODUCT  = LanmanNT
STF_PLATFORM = I386
[Files-I386-nt-compatibility]
9,NOTEPAD.EXE , SIZE=57344 , NODELETESOURCE
16,TASKMAN.EXE , SIZE=27136 , NODELETESOURCE
16,WINHELP.EXE , SIZE=256512
15,SYSTEM.INI , SIZE=512
15,WIN.INI , SIZE=512
15,WINFILE.INI , SIZE=512
23,_DEFAULT.PIF , SIZE=1
[Files-I386-nt-system-drivers]
18,STREAMS.SYS , SIZE=149504 , NODELETESOURCE
21,AFD.SYS , SIZE=41984
22,CDAUDIO.SYS , SIZE=35328
15,DISKPERF.SYS , SIZE=11264
20,HPSCAN16.SYS , SIZE=1024
22,MUP.SYS , SIZE=24064
21,NDIS.SYS , SIZE=50688
22,PARALLEL.SYS , SIZE=27136
15,SCSIPRNT.SYS , SIZE=19968
15,SCSISCAN.SYS , SIZE=19456
15,TDI.SYS , SIZE=14336
22,VGA_ALT.SYS , SIZE=28672
[Files-I386-nt-system-os2-dll]
15,DOSCALLS.DLL , SIZE=12800
[Files-I386-nt-system-os2]
19,OSO009 , SIZE=108544 , RENAME=oso001.009 , NODELETESOURCE
[Files-I386-nt-system-spool-prtprocs-winprint]
15,WINPRINT.DLL , SIZE=12288
[Files-I386-nt-system16]
22,COMMDLG.DLL , SIZE=22528 , NODELETESOURCE
23,MMSYSTEM.DLL , SIZE=20992 , NODELETESOURCE
20,OLECLI.DLL , SIZE=83456 , NODELETESOURCE
22,OLESVR.DLL , SIZE=24064 , NODELETESOURCE
16,SHELL.DLL , SIZE=5120 , NODELETESOURCE
16,VER.DLL , SIZE=9216 , NODELETESOURCE
21,SETUP16.INF , SIZE=59392 , RENAME=setup.inf
22,MMTASK.TSK , SIZE=1536 , NODELETESOURCE
[Files-I386-nt-system16always]
22,APP850.FON , SIZE=36864
23,CGA40850.FON , SIZE=6656
23,CGA40WOA.FON , SIZE=6656
23,CGA80850.FON , SIZE=4608
23,CGA80WOA.FON , SIZE=4608
22,DOSAPP.FON , SIZE=36864
15,EGA40850.FON , SIZE=8704
15,EGA40WOA.FON , SIZE=8704
15,EGA80850.FON , SIZE=5632
15,EGA80WOA.FON , SIZE=5632
15,MODERN.FON , SIZE=8704
16,ROMAN.FON , SIZE=13312
16,SCRIPT.FON , SIZE=12288
22,SMALLE.FON , SIZE=26112
16,SMALLF.FON , SIZE=21504
21,SYMBOLE.FON , SIZE=56832
13,SYMBOLF.FON , SIZE=81408
16,VGA860.FON , SIZE=5632
16,VGA861.FON , SIZE=5632
16,VGA863.FON , SIZE=5632
16,VGA865.FON , SIZE=5632
16,ARIAL.FOT , SIZE=1536
17,ARIALBD.FOT , SIZE=1536
17,ARIALBI.FOT , SIZE=1536
19,ARIALI.FOT , SIZE=1536
15,COUR.FOT , SIZE=1536
15,COURBD.FOT , SIZE=1536
15,COURBI.FOT , SIZE=1536
15,COURI.FOT , SIZE=1536
16,SYMBOL.FOT , SIZE=1536
16,TIMES.FOT , SIZE=1536
16,TIMESBD.FOT , SIZE=1536
16,TIMESBI.FOT , SIZE=1536
16,TIMESI.FOT , SIZE=1536
16,WINGDING.FOT , SIZE=1536
20,ARIAL.TTF , SIZE=73216
20,ARIALBD.TTF , SIZE=73216
20,ARIALBI.TTF , SIZE=79872
20,ARIALI.TTF , SIZE=69120
20,COUR.TTF , SIZE=80896
19,COURBD.TTF , SIZE=87552
19,COURBI.TTF , SIZE=94208
19,COURI.TTF , SIZE=89600
16,L_10646.TTF , SIZE=263680
20,SYMBOL.TTF , SIZE=64512
19,TIMES.TTF , SIZE=92160
19,TIMESBD.TTF , SIZE=88576
19,TIMESBI.TTF , SIZE=85504
19,TIMESI.TTF , SIZE=87040
20,WINGDING.TTF , SIZE=71168
[Files-I386-nt-system]
12,APPSTART.ANI , SIZE=8192
22,BANANA.ANI , SIZE=12288
11,BARBER.ANI , SIZE=8704
16,COIN.ANI , SIZE=7168
15,COUNTER.ANI , SIZE=7168
15,DRUM.ANI , SIZE=3584
15,FILLITUP.ANI , SIZE=15360
15,HAND.ANI , SIZE=3584
15,HORSE.ANI , SIZE=18944
15,HOURGLAS.ANI , SIZE=12288
15,METRONOM.ANI , SIZE=9728
16,PIANO.ANI , SIZE=5120
16,RAINBOW.ANI , SIZE=10240
16,RAINDROP.ANI , SIZE=5120
16,SIZENESW.ANI , SIZE=1024
16,SIZENS.ANI , SIZE=1024
16,SIZENWSE.ANI , SIZE=1024
16,SIZEWE.ANI , SIZE=1024
16,STOPWTCH.ANI , SIZE=7168
16,VANISHER.ANI , SIZE=2048
16,WAGTAIL.ANI , SIZE=2560
16,REMLINE.BAS , SIZE=12800
13,MIDIMAP.CFG , SIZE=38400
23,CHCP.COM , SIZE=19456
21,COMMAND.COM , SIZE=50176
15,DISKCOMP.COM , SIZE=31744
15,DISKCOPY.COM , SIZE=26624
15,EDIT.COM , SIZE=512
21,FORMAT.COM , SIZE=40448
15,GRAFTABL.COM , SIZE=26112
23,GRAPHICS.COM , SIZE=19968
15,KB16.COM , SIZE=14848
22,KEYB.COM , SIZE=31232
15,LOADFIX.COM , SIZE=1536
21,MODE.COM , SIZE=40960
22,MORE.COM , SIZE=34816
16,TREE.COM , SIZE=26112
23,WIN.COM , SIZE=15360
21,EGA.CPI , SIZE=58880
15,CURSORS.CPL , SIZE=23040
17,MAIN.CPL , SIZE=214016
23,MULTIMED.CPL , SIZE=10752
13,SRVMGR.CPL , SIZE=250368
22,UPS.CPL , SIZE=33280
22,COMMDLG.DLL , SIZE=22528 , NODELETESOURCE
15,DLCAPI.DLL , SIZE=17408 , NODELETESOURCE
19,MCIAVI32.DLL , SIZE=82944 , NODELETESOURCE
23,MMSYSTEM.DLL , SIZE=20992 , NODELETESOURCE
21,MSVFW32.DLL , SIZE=52224 , NODELETESOURCE
21,MSVIDC32.DLL , SIZE=38400 , NODELETESOURCE
20,OLECLI.DLL , SIZE=83456 , NODELETESOURCE
22,OLESVR.DLL , SIZE=24064 , NODELETESOURCE
16,SHELL.DLL , SIZE=5120 , NODELETESOURCE
16,VER.DLL , SIZE=9216 , NODELETESOURCE
18,AB32.DLL , SIZE=132608
15,ACLEDIT.DLL , SIZE=220672
22,ALRSVC.DLL , SIZE=34304
17,CARDS.DLL , SIZE=158208
23,CLB.DLL , SIZE=17920
22,CUFAT.DLL , SIZE=31744
22,CUHPFS.DLL , SIZE=35840
22,DDEML.DLL , SIZE=36864
20,DEMIL32.DLL , SIZE=62976
21,DRIVERS.DLL , SIZE=49152
15,FMIFS.DLL , SIZE=15872
15,FRAME32.DLL , SIZE=287744
23,HPSCAN32.DLL , SIZE=9728
21,HTUI.DLL , SIZE=51712
20,IFSUTIL.DLL , SIZE=70656
21,IMAGEHLP.DLL , SIZE=52736
12,IMPEXP32.DLL , SIZE=89088
15,IOLOGMSG.DLL , SIZE=11264
15,LOCALMON.DLL , SIZE=27648
19,LOCALSPL.DLL , SIZE=95744
15,LZEXPAND.DLL , SIZE=10240
20,MAILM32.DLL , SIZE=69632
23,MAPI.DLL , SIZE=19968
22,MAPI32.DLL , SIZE=23552
22,MAPISRV.EXE , SIZE=28672
20,MAPIXX.DLL , SIZE=72192
22,MCICDA.DLL , SIZE=24576
23,MCIOLE16.DLL , SIZE=7168
15,MCIOLE32.DLL , SIZE=16896
22,MCISEQ.DLL , SIZE=34816
22,MCIWAVE.DLL , SIZE=33792
19,MIDIMAP.DLL , SIZE=88064
15,MMDRV.DLL , SIZE=20992
18,MORICONS.DLL , SIZE=140288
19,MPRUI.DLL , SIZE=113664
15,MSAUDITE.DLL , SIZE=28672
23,MSOBJS.DLL , SIZE=16384
19,MSPELL32.DLL , SIZE=106496
15,MSPRIVS.DLL , SIZE=29184
16,MSSCHD32.DLL , SIZE=279552
15,MSSFS32.DLL , SIZE=337920
23,MVAPI32.DLL , SIZE=10240
20,MVFS32.DLL , SIZE=73728
21,NDDEAPI.DLL , SIZE=38400
18,NETAPI.DLL , SIZE=119808
22,NETBIOS.DLL , SIZE=30208
21,NETEVENT.DLL , SIZE=49152
14,NETH.DLL , SIZE=239616
17,NTLANMAN.DLL , SIZE=177152
19,OLECLI32.DLL , SIZE=93696
21,OLESVR32.DLL , SIZE=43008
21,PABNSP32.DLL , SIZE=58880
21,PERFCTRS.DLL , SIZE=56832
21,PMSPL.DLL , SIZE=46592
19,PSXDLL.DLL , SIZE=90624
16,RPCLTC3.DLL , SIZE=12800
16,RPCLTC5.DLL , SIZE=14848
16,RPCLTC6.DLL , SIZE=12800
16,RPCLTS3.DLL , SIZE=14848
16,RPCLTS5.DLL , SIZE=15872
16,RPCLTS6.DLL , SIZE=14848
21,RPCNS4.DLL , SIZE=48640
19,SCHMSG32.DLL , SIZE=91648
16,SENDFL32.DLL , SIZE=14336
16,SOUND.DLL , SIZE=19456
16,SPOOLSS.DLL , SIZE=23552
17,SRVSVC.DLL , SIZE=177152
15,STORE32.DLL , SIZE=310272
16,TOOLHELP.DLL , SIZE=13824
16,TRNSCH32.DLL , SIZE=25088
19,UFAT.DLL , SIZE=88064
18,UHPFS.DLL , SIZE=149504
18,ULIB.DLL , SIZE=160256
15,UNTFS.DLL , SIZE=299520
16,UREG.DLL , SIZE=29184
23,VCDEX.DLL , SIZE=14336
16,VDMDBG.DLL , SIZE=22016
20,VDMREDIR.DLL , SIZE=76800
17,VFORM32.DLL , SIZE=206848
19,WGPOMG32.DLL , SIZE=112640
19,WIN32SPL.DLL , SIZE=114176
16,WIN87EM.DLL , SIZE=13312
22,WINMSD.DLL , SIZE=26112
15,WOW32.DLL , SIZE=345088
19,XACTSRV.DLL , SIZE=106496
23,NT.DOC , SIZE=5120
23,COMM.DRV , SIZE=10240
15,KEYBOARD.DRV , SIZE=1536
17,LANMAN.DRV , SIZE=221696
15,MOUSE.DRV , SIZE=3072
22,MSACM32.DRV , SIZE=33280
16,SOUND.DRV , SIZE=1536
16,SYSTEM.DRV , SIZE=3072
16,VGA.DRV , SIZE=4608
23,WFWNET.DRV , SIZE=12800
23,LMSVCS.EXE , SIZE=22016 , NODELETESOURCE
16,TASKMAN.EXE , SIZE=27136 , NODELETESOURCE
21,ACLCONV.EXE , SIZE=54272
23,APPEND.EXE , SIZE=11264
21,AT.EXE , SIZE=59392
22,ATSVC.EXE , SIZE=29184
21,ATTRIB.EXE , SIZE=39424
11,AUTOCONV.EXE , SIZE=662016
23,AUTOSETP.EXE , SIZE=13824
22,BACKUP.EXE , SIZE=36352
22,BOOTOK.EXE , SIZE=23552
23,BOOTVRFY.EXE , SIZE=15360
22,CHKDSK.EXE , SIZE=23552
19,CLIPBRD.EXE , SIZE=111104
21,CLIPSRV.EXE , SIZE=51200
18,CMD.EXE , SIZE=159744
21,COMP.EXE , SIZE=38400
22,CONTROL.EXE , SIZE=36352
15,CONVERT.EXE , SIZE=28160
21,DDESHARE.EXE , SIZE=39424
23,DEBUG.EXE , SIZE=20992
15,DISKPERF.EXE , SIZE=28672
15,DOSKEY.EXE , SIZE=42496
21,DOSX.EXE , SIZE=39936
22,DRWATSON.EXE , SIZE=26624
20,DRWTSN32.EXE , SIZE=76288
15,EDLIN.EXE , SIZE=12800
20,EVENTLOG.EXE , SIZE=77312
17,EVENTVWR.EXE , SIZE=204800
15,EXE2BIN.EXE , SIZE=8704
21,EXPAND.EXE , SIZE=39424
15,FASTOPEN.EXE , SIZE=1024
21,FC.EXE , SIZE=41472
15,FIND.EXE , SIZE=26112
21,FINDSTR.EXE , SIZE=52736
15,FORCEDOS.EXE , SIZE=20992
15,GDI.EXE , SIZE=22528
15,HELP.EXE , SIZE=27136
22,INTRO.EXE , SIZE=34304
20,KRNL386.EXE , SIZE=80384
15,LABEL.EXE , SIZE=27136
20,MAILSP32.EXE , SIZE=73216
21,MEM.EXE , SIZE=39424
15,MPNOTIFY.EXE , SIZE=28160
21,MSCDEXNT.EXE , SIZE=1024
21,MSGSVC.EXE , SIZE=57344
12,MSMAIL32.EXE , SIZE=397824
21,MSRMND32.EXE , SIZE=46080
23,NDDEAGNT.EXE , SIZE=14848
23,NDDEAPIR.EXE , SIZE=9728
17,NET.EXE , SIZE=203776
18,NETDDE.EXE , SIZE=153088
23,NLSFUNC.EXE , SIZE=7168
11,NTBACKUP.EXE , SIZE=753664
12,NTVDM.EXE , SIZE=551424
13,OS2.EXE , SIZE=520192
18,OS2SRV.EXE , SIZE=146944
23,OS2SS.EXE , SIZE=11264
20,PAX.EXE , SIZE=73216
17,PERFMON.EXE , SIZE=190464
19,PIFEDIT.EXE , SIZE=91648
21,PORTUAS.EXE , SIZE=43520
21,POSIX.EXE , SIZE=48128
16,PRINT.EXE , SIZE=23552
18,PRINTMAN.EXE , SIZE=160256
19,PSXSS.EXE , SIZE=100864
16,QBASIC.EXE , SIZE=254976
16,RECOVER.EXE , SIZE=23552
16,REDIR.EXE , SIZE=3584
17,REGEDT32.EXE , SIZE=180736
16,REPLACE.EXE , SIZE=28672
21,RESTORE.EXE , SIZE=58880
12,SCHDPL32.EXE , SIZE=643584
23,SETACL.EXE , SIZE=19456
16,SETVER.EXE , SIZE=11776
16,SHARE.EXE , SIZE=1024
16,SORT.EXE , SIZE=23552
20,SPOOLSS.EXE , SIZE=73216
14,SRVMGR.EXE , SIZE=375296
16,SUBST.EXE , SIZE=27136
16,SYSEDIT.EXE , SIZE=18944
21,UPEDIT.EXE , SIZE=47104
16,UPS.EXE , SIZE=19456
21,USER.EXE , SIZE=44032
16,USERINIT.EXE , SIZE=30720
12,USRMGR.EXE , SIZE=534528
18,WINDISK.EXE , SIZE=130048
17,WINFILE.EXE , SIZE=250880
20,WINMSD.EXE , SIZE=75264
21,WINMSDP.EXE , SIZE=47104
16,WINSPOOL.EXE , SIZE=3072
16,WINVER.EXE , SIZE=20992
16,WOWDEB.EXE , SIZE=5120
16,WOWEXEC.EXE , SIZE=15872
21,XCOPY.EXE , SIZE=41472
23,NT.FNT , SIZE=8192
23,NT2.FNT , SIZE=11776
15,DOSHELP.HLP , SIZE=4608
17,DRWTSN32.HLP , SIZE=186368
23,EDIT.HLP , SIZE=17920
23,FTPSMX.HLP , SIZE=13824
22,HALFTONE.HLP , SIZE=28672
21,NET.HLP , SIZE=54784
23,NETWORK.HLP , SIZE=15872
14,NTCMDS.HLP , SIZE=461824
22,SNDVOL32.HLP , SIZE=34304
18,SRVMGR.HLP , SIZE=125440
21,UPEDIT.HLP , SIZE=40448
18,USRMGR.HLP , SIZE=130048
21,WINDISKA.HLP , SIZE=57344
22,WINHELP.HLP , SIZE=32768
15,INTRO.ICO , SIZE=1024
15,CALC.IND , SIZE=313344
12,NTCMDS.IND , SIZE=569344
16,USRMGR.IND , SIZE=276480
15,MMDRIVER.INF , SIZE=4096
21,NTLMINST.INF , SIZE=54272
17,MSP32_AM.LEX , SIZE=177152
21,PASSPORT.MID , SIZE=40448
22,AUTOEXEC.NT , SIZE=512 , RENAME=autoexec.tmp , NOLOG
15,CONFIG.NT , SIZE=1536 , RENAME=config.tmp , NOLOG
15,GRAPHICS.PRO , SIZE=21504
23,CMOS.RAM , SIZE=512
16,BIOS1.ROM , SIZE=25088
23,BIOS2.ROM , SIZE=8192
16,V7VGA.ROM , SIZE=18944
23,BLACK16.SCR , SIZE=5632
23,PCL.SEP , SIZE=512
23,PSCRIPT.SEP , SIZE=512
21,PSLANMAN.SEP , SIZE=3072
20,SYSPRINT.SEP , SIZE=3584
23,CLIP01.SEQ , SIZE=15872
22,CLIP02.SEQ , SIZE=28160
22,CLIP03.SEQ , SIZE=25600
15,COMM01.SEQ , SIZE=10240
22,COMM02.SEQ , SIZE=23040
23,CONN01.SEQ , SIZE=16384
22,CONN02.SEQ , SIZE=28672
23,CREAT01.SEQ , SIZE=18432
23,CREAT02.SEQ , SIZE=18944
22,INTRO1.SEQ , SIZE=27136
23,INTRO2.SEQ , SIZE=18432
23,LOG01.SEQ , SIZE=17920
22,NTMENU.SEQ , SIZE=24064
16,PANEL.SEQ , SIZE=10240
16,PAUSE.SEQ , SIZE=4096
22,PRINT01.SEQ , SIZE=29696
23,REVIEW.SEQ , SIZE=2560
23,SETT01.SEQ , SIZE=23040
22,SETT02.SEQ , SIZE=25600
23,SETT03.SEQ , SIZE=22016
16,SETT04.SEQ , SIZE=15360
23,SHARE01.SEQ , SIZE=15872
23,SHARE02.SEQ , SIZE=17920
23,ANSI.SYS , SIZE=9216
15,COUNTRY.SYS , SIZE=17408
15,HIMEM.SYS , SIZE=6144
15,KEYBOARD.SYS , SIZE=21504
22,NTDOS.SYS , SIZE=27648
22,NTIO.SYS , SIZE=34816
17,WDL.TRM , SIZE=4096
22,MMTASK.TSK , SIZE=1536 , NODELETESOURCE
16,WINPERMS.TXT , SIZE=50176
18,README.WRI , SIZE=126976
[Files-I386-nt]
11,LANMANNT.BMP , SIZE=76800
9,WRITE.EXE , SIZE=245248 , NODELETESOURCE
22,REGEDIT.EXE , SIZE=32768
22,REGEDIT.HLP , SIZE=23040
23,RINGIN.WAV , SIZE=10240
23,RINGOUT.WAV , SIZE=5632
[LanguageID]
   ENG
[LanguageTextENG]
   "English (American)"
[BuiltinAccountNameVar]
AdminAccountName = "Administrator"
GuestAccountName = "Guest"
[PrintMonitorName]
MonitorName = "Local Port"
[ProgressCopyENG]
    ProCaption   = "Windows NT Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correctly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"
[LanguageDlgENG]
    Caption      = "Language Selection"
    DlgText      = "Setup will appear in one of the following languages.  Choose "+
                   "the one you prefer."
    ListHeader   = ""
    Continue     = "Continue"
    Help         = "&Help"
    Exit         = "E&xit Setup"
    DlgType      = "List"
    DlgTemplate  = "Language"
    ListItemsIn  = ^(LanguageText$(!STF_LANGUAGE), 1)
    ListItemsOut = *($(ListItemsIn), ~($(LanguageList), $(!STF_LANGUAGE)))
    HelpContext  = ""
[QueryFullNameDlgENG]
    Caption     = "Windows NT Setup"
    DlgText     = "Please type your full name in the box below."$(!LF)$(!LF)+
                  "Then choose Continue or press ENTER."$(!LF)$(!LF)+
                  "The information you enter will be used by Setup "+
                  "for subsequent installation of Windows NT."
    Edit1Label  = "&Name:"
    Continue    = "Continue"
    Help        = "&Help"
    Exit        = "E&xit Setup"
    DlgType     = "Edit"
    DlgTemplate = "QUERY_FULLNAME"
    HelpContext = $(!IDH_DB_FULLNAMEQ_INS)
    EditTextLim = 50
    EditTextIn  = $(!FullName)
    EditFocus   = "ALL"
[QueryFullNameOrgNameDlgENG]
    Caption     = "Windows NT Setup"
    DlgText     = "Please type your full name in the box below.  "+
                  "You may also specify the name of your company if "+
                  "Windows NT will be used for business purposes."$(!LF)$(!LF)+
                  "Then choose Continue or press ENTER."$(!LF)$(!LF)+
                  "The information you enter will be used by Setup "+
                  "for subsequent installations of Windows NT."
    Edit1Label  = "&Name:"
    Edit2Label  = "&Company:"
    Continue    = "Continue"
    Help        = "&Help"
    Exit        = "E&xit Setup"
    DlgType     = "MultiEdit"
    DlgTemplate = "QUERY_FULLNAME_ORGNAME"
    HelpContext = $(!IDH_DB_ORGNAMEQ_INS)
    EditTextLim = {50, 50}
    EditTextIn  = {$(!FullName), $(!OrgName)}
[VerifyFullNameDlgENG]
    Caption      = "Windows NT Setup"
    DlgText      = "Please verify that the name you typed is correct."$(!LF)$(!LF)+
                   "If you would like to change it, choose Change. "+
                   "Otherwise choose Continue."
    Static1Label = "Name:"
    Continue     = "Continue"
    Cancel       = "&Change"
    Help         = "&Help"
    Exit         = "E&xit Setup"
    Static1Text  = $(!FullName)
    DlgType      = "Info"
    DlgTemplate  = "VERIFY_FULLNAME"
    HelpContext  = $(!IDH_DB_FULLNAMEV_INS)
[VerifyFullNameOrgNameDlgENG]
    Caption      = "Windows NT Setup"
    DlgText      = "Please verify that the information you typed is correct."$(!LF)$(!LF)+
                   "If you would like to change the name or the company "+
                   "choose Change. Otherwise, choose Continue."
    Static1Label = "Name:"
    Static1Text  = $(!FullName)
    Static2Label = "Company:"
    Static2Text  = $(!OrgName)
    Continue     = "Continue"
    Cancel       = "&Change"
    Help         = "&Help"
    Exit         = "E&xit Setup"
    DlgType      = "Info"
    DlgTemplate  = "VERIFY_FULLNAME_ORGNAME"
    HelpContext  = $(!IDH_DB_ORGNAMEV_INS)
[QueryComputerNameDlgENG]
    Caption     = "Windows NT Setup"
    DlgText     = "Windows NT needs a Computer Name to identify your "+
                  "computer.  Please enter a unique name of 15 characters "+
                  "or less."$(!LF)$(!LF)+
                  "If you are joining a Windows NT Advanced Server domain, you "+
                  "should get the name from your network administrator."
    Edit1Label  = "&Computer Name:"
    Continue    = "Continue"
    Help        = "&Help"
    Exit        = "E&xit Setup"
    DlgType     = "Edit"
    DlgTemplate = "QUERY_COMPUTER_NAME"
    HelpContext = $(!IDH_DB_COMPUTERNAMEQ_INS)
    EditTextLim = 15
    EditTextIn  = $(ComputerName)
    EditFocus   = "ALL"
[QueryComputerNameDlgASENG]
    Caption     = "Windows NT Setup"
    DlgText     = "Windows NT needs a Computer Name to identify your "+
                  "computer.  Please enter a unique name of 15 characters "+
                  "or less."$(!LF)$(!LF)+
                  "You must ensure that this name is unique on your network "+
                  "or you will encounter installation problems later."
    Edit1Label  = "&Computer Name:"
    Continue    = "Continue"
    Help        = "&Help"
    Exit        = "E&xit Setup"
    DlgType     = "Edit"
    DlgTemplate = "QUERY_COMPUTER_NAME"
    HelpContext = $(!IDH_DB_COMPUTERNAMEQ_INS)
    EditTextLim = 15
    EditTextIn  = $(ComputerName)
    EditFocus   = "ALL"
[VerifyComputerNameDlgENG]
    Caption      = "Windows NT Setup"
    DlgText      = "Please verify that the name you typed is correct."$(!LF)$(!LF)+
                   "If you would like to change it, choose Change. "+
                   "Otherwise choose Continue."
    Static1Label = "Computer Name:"
    Static1Text  = $(ComputerName)
    Continue     = "Continue"
    Cancel       = "&Change"
    Help         = "&Help"
    Exit         = "E&xit Setup"
    DlgType      = "Info"
    DlgTemplate  = "VERIFY_COMPUTER_NAME"
    HelpContext  = $(!IDH_DB_COMPUTERNAMEV_INS)
[AccountDlgENG]
    Caption     = "Local Account Setup"
    DlgText     = "Setup can create a local account for the user.  "+
                  "Please enter a Username of 15 characters or less and a "+
                  "Password of 14 characters or less to use for the account.  "+
                  "Reenter the same password in the Confirm Password field.  "+
                  "If you want to have no Password for the account don't enter "+
                  "anything in the Password or Confirm Password fields."$(!LF)$(!LF)+
                  "If you want to cancel setting up a local account you can add "+
                  "a local account later using the User Manager."
    Edit1Label  = "&Username:"
    Edit2Label  = "&Password:"
    Edit3Label  = "&Confirm Password:"
    Continue    = "Continue"
    Cancel      = "Cancel"
    Help        = "&Help"
    Exit        = "E&xit Setup"
    DlgType     = "MultiEdit"
    DlgTemplate = "ACCOUNT_SETUP"
    HelpContext = $(!IDH_DB_ACCOUNTSETUP_INS)
    EditTextLim = {15, 14, 14}
    EditTextIn  = {$(Username), "", ""}
[AdminAccountDlgENG]
    Caption     = "Administrator Account Setup"
    DlgText1    = "Please enter a Password of 14 characters or less to use "+
                  "for the Administrator account.  Reenter the same password "+
                  "in the Confirm Password field."$(!LF)$(!LF)+
                  "The Administrator account allows maximum access to your "+
                  "computer's resources.  Therefore the administrator password "+
                  "is an important piece of information which you should guard "+
                  "carefully."$(!LF)$(!LF)+
                  "Note: take special care to remember the password you supply.  "+
                  "Setup recommends that you write the password down and store "+
                  "it in a safe place."
    DlgText2    = "Username:"
    DlgText3    = "Administrator"
    Edit1Label  = "&Password:"
    Edit2Label  = "&Confirm Password:"
    Continue    = "Continue"
    Help        = "&Help"
    Exit        = "E&xit Setup"
    DlgType     = "MultiEdit"
    DlgTemplate = "ADMIN_ACCOUNT_SETUP"
    HelpContext = $(!IDH_DB_ACCOUNTADMN_INS)
    EditTextLim = {14, 14}
    EditTextIn  = {"", ""}
[InstallModeDlgENG]
    Caption     = "Setup Methods"
    DlgText     = "Express Setup installs Windows NT Tools using default settings "+
                  "and detected configuration."$(!LF)$(!LF)+
                  "Custom Setup gives you more control in viewing detected configuration "+
                  "and choosing options."$(!LF)$(!LF)+
                  "Choose one of the two Setup methods:"
    Continue    = "Continue"
    Help        = "&Help"
    Exit        = "E&xit Setup"
    Radio1Text    = "&Express Setup"
    Radio2Text    = "&Custom Setup"
    DlgType     = "Radio"
    DlgTemplate = "INSTALLMODE"
    HelpContext = $(!IDH_DB_INSTALLMODE_INS)
    RadioHeader   = ""
    RadioDefault  = $(InteractDefault)
    OptionsGreyed = {}
[OptionsDlgENG]
    Caption     = "Windows NT Setup"
     DlgText    = "Setup will perform each optional task shown below with "+
                  "an 'X' in its check box."$(!LF)$(!LF)+
                  "To perform the selected tasks, choose Continue or press "+
                  "ENTER."$(!LF)$(!LF)+
                  "To change a selection, clear or select its check box, and "+
                  "then choose Continue or press ENTER."
    Check1Text  = "Set Up Only &Windows Components You Select"
    Check2Text  = "Set Up &Printers (locally connected printers only)"
    Check3Text  = "Set Up &Network"
    Check4Text  = "Set Up &Applications on the Hard Disk(s)"
    Continue      = "Continue"
    Help          = "&Help"
    Exit          = "E&xit Setup"
    DlgType     = "Check"
    DlgTemplate = "PDKOPTIONS"
    HelpContext   = $(!IDH_DB_OPTIONS_INS)
    CheckItemsIn = { $(!DoPartial),  $(!DoPrinter),   $(!DoNetwork), +
                     $(!DoAppSetup)}
[SetupDoneDlgENG]
    Caption     = "Windows NT Setup"
    DlgText     = "Windows NT 3.1 is now installed."$(!LF)$(!LF)+
                  "Remove disks from the floppy disk drives and "+
                  "choose Restart Computer to run the installed system."
    Reboot      = "&Restart Computer"
    Windows     = "E&xit to Windows NT"
    DlgType     = "Info"
    DlgTemplate = "REBOOT"
[SetupNotDoneDlgENG]
    Caption     = "Windows NT Setup"
    DlgText     = "Windows NT 3.1 has not been installed."$(!LF)$(!LF)+
                  "Remove disks from the floppy disk drives and "+
                  "choose Restart Computer to restart your computer."
    Reboot      = "&Restart Computer"
    Windows     = "E&xit to Windows NT"
    DlgType     = "Info"
    DlgTemplate = "REBOOT"
[SetupDoneRestartDlgENG]
    Caption     = "Windows NT Setup"
    DlgText     = "Windows NT System files have been copied to the destination drive."$(LF)$(LF)+
                  "Choose Exit to return to Windows NT."
    Windows     = "E&xit to Windows NT"
    DlgType     = "Info"
    DlgTemplate = "RESTART"
[SetupNotDoneRestartDlgENG]
    Caption     = "Windows NT Setup"
    DlgText     = "Setup failed to copy Windows NT system files to the destination drive."$(LF)$(LF)+
                  "Choose Exit to return to Windows NT."
    Windows     = "E&xit to Windows NT"
    DlgType     = "Info"
    DlgTemplate = "RESTART"
[Warning1ENG]
Warning = "Setup failed to capture your previous configuration for failure-proof "+
          "booting.  Please choose OK to continue or Cancel to exit setup."
[Warning2ENG]
Warning = "No local account will be set up."
[Warning3ENG]
Warning = "No password has been entered.  Choose OK to leave the "+
          "password blank, or Cancel if you want to enter a password."
[FatalError1ENG]
Fatal  = "Setup cannot install on the current processor."$(!LF)$(!LF)"Cannot proceed with install."
[FatalError2ENG]
Fatal  = "System Memory Size not sufficient.  At least "$(MinSystemMemory)"KB "+
         "is required."$(!LF)$(!LF)"Cannot proceed with install."
[FatalError3ENG]
Fatal  = "Setup couldn't modify the registry for your hardware options."$(!LF)$(!LF)"Cannot proceed with install."
[FatalError4ENG]
Fatal  = "Setup couldn't modify your computer name."$(!LF)$(!LF)"Cannot proceed with install."
[FatalError5ENG]
Fatal  = "Setup couldn't create a registry entry for your Windows NT Software."$(!LF)$(!LF)"Cannot proceed with install."
[FatalError6ENG]
Fatal  = "Setup cannot be run directly to ugrade your Windows NT system.  Please "+
         "refer to your manuals on how to run Setup."
[FatalError7ENG]
Fatal  = "Flexboot setup failed.  Cannot proceed with install. Please contact "+
         "your system administrator."
[FatalError8ENG]
Fatal  = "Setup Source Drive doesn't have the Windows NT Setup sources."
[FatalError9ENG]
Fatal  = "Setup failed to initialize security on your computer. "+
         "Installation is halted."
[FatalError10ENG]
Fatal = "Setup failed to setup your system for secure operation."
[FatalError11ENG]
Fatal = "The INITIAL.INF file does not match your computer."
[FatalError12ENG]
Fatal = "Setup was unable to build the user's default configuration file. "+
        "Windows NT cannot log on a user without this file."
[FatalError13ENG]
Fatal = "Setup was unable to reset the SystemSetupInProgress value to "+
        "indicate Setup completion."
[FatalError14ENG]
Fatal = "UNC Names are not supported by Initial Setup."
[FatalError17ENG]
Fatal  = "No free drives available to connect to UNC Drive."
[FatalError18ENG]
Fatal  = "Error processing source drive."
[NonFatalError1ENG]
NonFatal = "Setup cannot function properly unless your enter your name."
[NonFatalError2ENG]
NonFatal = "Setup failed to install configuration files for the MS-DOS "+
           "subsystem. Setup will ignore this error."
[NonFatalError3ENG]
NonFatal = "Setup failed to get configuration information on paging files. "+
           "Setup will continue install with the default paging file on your "+
           "computer. Paging file sizes can be changed after installation "+
           "from the control panel system applet."
[NonFatalError4ENG]
NonFatal = "Setup failed to find printer information.  Setup will not "+
           "install any printers on your system.  Printers can be installed "+
           "after system installation using Print Manager."
[NonFatalError5ENG]
NonFatal = "Setup cannot function properly unless you enter the information requested."
[NonFatalError6ENG]
NonFatal = "Setup failed to configure the paging files on your computer. "+
           "Windows NT will continue to use the default paging file. "+
           "Ignoring the error."
[NonFatalError7ENG]
NonFatal = "You may not use ""."" or "".."" as your computer name."
[NonFatalError7aENG]
NonFatal = "Computer names may not start or end with a space, "+
           "and the following characters are not allowed:"$(!LF)+
           "/ \ [ ] "" : ; | < > + = , ? *"
[NonFatalError8ENG]
NonFatal  = "Configuring printers failed."$(!LF)$(!LF)" No printers were installed. "+
            "Printers can be installed after system installation using Print Manager."
[NonFatalError9ENG]
NonFatal  = "Failed to initialize printer support."$(!LF)$(!LF)+
            "No printers were installed."
[NonFatalError10ENG]
NonFatal = "The Password and the Confirm Password fields are different. "+
           "Please enter both fields again."
[NonFatalError12ENG]
NonFatal = "Failed to enable the EventLog service."
[NonFatalError13ENG]
NonFatal = "Setup failed to configure the subsystem that runs "+
           "16-bit Windows applications. Setup will ignore this error."
[NonFatalError14ENG]
NonFatal = "Usernames may not start or end with a space, "+
           "and the following characters are not allowed:"$(!LF)+
           "/ \ [ ] "" : ; | < > + = , ? *"
[NonFatalError15ENG]
NonFatal = "You must enter a Username to set up a local account, or choose "+
           "Cancel if you do not want to create a local account."
[NonFatalError16ENG]
NonFatal = "A local account already exists for the Username entered.  Please "+
           "choose a different Username."
[Status1ENG]
Status = "The printer '"$(PrinterName)"' has been set up for use on "+
         "Windows NT."
[BillboardsENG]
Billboard1 = "Please wait..."
Billboard2 = "Setup is configuring your system for FlexBoot.  Please wait..."
Billboard3 = "Setup is configuring your hardware options.  Please wait..."
Billboard4 = "Setup is configuring your registry.  Please wait..."
Billboard5 = "Setup is migrating information from any previously installed "+
             "DOS system.  Please wait..."
Billboard6 = "Setup is configuring the paging file for your Windows NT system. "+
             "Please wait..."
Billboard7 = "Setup is configuring printers.  Please wait..."
Billboard8 = "Setup is creating accounts in your security database.  Please wait..."
Billboard9 = "Setup is migrating information from any previously installed "+
             "Windows system.  Please wait..."
Billboard10 = "Please wait while Setup removes temporary files..."
Billboard11 = "Setup is installing fonts.  Please wait..."
[DateTimeENG]
Applet = "date/time"
[FontList]
"Arial (TrueType)"                         = ARIAL.FOT
"Arial Bold (TrueType)"                    = ARIALBD.FOT
"Arial Bold Italic (TrueType)"             = ARIALBI.FOT
"Arial Italic (TrueType)"                  = ARIALI.FOT
"Courier New (TrueType)"                   = COUR.FOT
"Courier New Bold (TrueType)"              = COURBD.FOT
"Courier New Bold Italic (TrueType)"       = COURBI.FOT
"Courier New Italic (TrueType)"            = COURI.FOT
"Modern (Plotter)"                         = MODERN.FON
"Roman (Plotter)"                          = ROMAN.FON
"Script (Plotter)"                         = SCRIPT.FON
"Symbol (TrueType)"                        = SYMBOL.FOT
"Times New Roman (TrueType)"               = TIMES.FOT
"Times New Roman Bold (TrueType)"          = TIMESBD.FOT
"Times New Roman Bold Italic (TrueType)"   = TIMESBI.FOT
"Times New Roman Italic (TrueType)"        = TIMESI.FOT
"WingDings (TrueType)"                     = WINGDING.FOT
[FontListE]
"Small Fonts (VGA res)"                    = SMALLE.FON
"Symbol 8,10,12,14,18,24 (VGA res)"        = SYMBOLE.FON
[FontListF]
"Small Fonts (8514/a res)"                 = SMALLF.FON
"Symbol 8,10,12,14,18,24 (8514/a res)"     = SYMBOLF.FON



