VESA Mode Identifier
                    ====================

----------------------------------------------------------------------------
This utility program is copyright Criterion Software Limited 1995.
You may not disassemble, decompile or reverse engineer this
program.

This program is provided as is with no warranties of any
kind. Criterion Software  will not, under any circumstances, be liable for
any lost revenue or other  damages arising from the use of this
program.

RenderWare is a trademark of Canon Inc.
----------------------------------------------------------------------------


The purpose of this tool is to display the video modes that the VESA bios
has available. A sub set of these modes are available to RenderWare.

1) Renderware can only work with 8,15 and 16 bit modes

2) Renderware can only work with standard VESA resolutions (320x200),
(640x400),(640x480),(800x600),(1024x768) and (1280x1024).

3) The mode must be 'available' that is the correct monitor is attached and
the video card has enough memory to support the mode.

4) The bios must give the VESA standard video mode number.

The format of the output is

VESA video mode in hex.
Resolution Width
Resolution Height
Resolution Depth
Available/Not available (is the mode accessable on the current setup)
Text/Graphics Mode
Red:Green:Blue component bit width.
Red-Green-Blue position of components within display word.

Note that the last two values will not be displayed on older versions of
the VESA bios (1.0). Also the last two values only have meaning in modes with
depths greater than 8 bits (They will appear as 0 for 8 and 4 bit modes).

       ==========================================================