RenderWare(tm) v1.4 FCS MS-Dos Demonstration Program
     ====================================================

----------------------------------------------------------------------------
This demonstration program is copyright Criterion Software Limited 1994.
You may not disassemble, decompile or reverse engineer this demonstration
program.

This demonstration program is provided as is with no warranties of any
kind. Criterion Software  will not, under any circumstances, be liable for
any lost revenue or other  damages arising from the use of this
demonstration program.

RenderWare is a trademark of Canon Inc.
----------------------------------------------------------------------------

DOSROBOT.EXE
============

DOSROBOT.EXE demonstrates RenderWare's animation and hierarchical modeling
facilities. The application shows a scene containing a simple model of a
robot. The robot stands on a checkerboard floor which also
contains a box wrapped in gift paper. You can give an object to the
robot by clicking on one of the words "ball","torus","banana" or
"eggs". The object will drop onto the checker board floor.  The robot will
decide whether it "likes" the dropped object.  If it does, the robot will put
the object into its box. Otherwise it will throw the object away. The robot
remembers which objects it liked and which it did not.

The Application Controls
------------------------

The application controls are as follows:

1) To "give" an object to the robot.
   Click on the name of the object you wish to give to the robot.

2) To pan the camera around the robot.
   Hold down the left mouse button and move the mouse left or
   right.

3) To zoom the camera toward or away from the robot.
   Hold down the left mouse button and move the mouse up or
   down.

3) To tilt the camera over or under the robot.
   Hold down the left mouse button and the SHIFT key and move
   the mouse up or down.

4) To pan the light around the robot.
   Hold down the left mouse button and CONTROL key and move
   the mouse left or right.

5) Press ESC to exit.