** FIXED.SD **************************************************************

This file describes the bugs fixed in StupenDOS 5.0, and the new features
that have been added.

Some of the bugs mentioned in this file are bugs in previous beta
versions, and did not occur in the 4.0 release version.

**************************************************************************

* Fixed problem with files disappearing from the ZIP screen after using TYPE.
  Turning off the setuP | External programs | List files | Update time/date
  in version 4 also fixes the problem.

* After executing a program or batch file that changes the default directory,
  SD will now reread the files after returning.

* Copying to a write protected floppy would try to copy each tagged file.  It
  will now abort after the write protect error is displayed.

* The -b option didn't work when deleting files with PKZIP, this has been
  fixed.

* The Current directory number displayed while selecting a directory within
  Prune And Graft was not always correct.  Fixed.

* The file finder acted strangely when files were being displayed, and the
  mouse cursor was on the screen.  Fixed.

* If the number of windows was set to TWO, and you specified two different
  directories on the command line, the second window would not display the
  correct directory.  Fixed.

* The Reread after ZIP/UNZIP didn't work for zipping. Fixed.

* After running a ZIP operation, the sort method was reset to the default
  method.  Fixed.

* After using Unzip | View to console, SD will remain in the UNZIP screen. It
  used to go back to the main screen.

* Added a counter to the LOCATE function.  Press '/' to try it.

* Added some information to the More | Byte Info option.

* After executing a file (like list), the filelist was usually reread.  This
  has been fixed.

* Clicking on a file, and then dragging the mouse did not work if the mouse
  was not released after selecting a file.  Fixed.

* The '/' match function would crash if no matching files were found.  Fixed.

* If you have OVERWRITE turned off during a copy, the warning message
  displayed could be truncated if the destination path was too long.  The
  message was previously truncated too short, this has been fixed.

* Added a 28 line screen mode (look under setuP | Video | Monitor)

* Added file coloring to the file finder and ZIP/UNZIP screens.

* Added "Drag And Tag" to the ZIP and UNZIP screens.

* Typing 'Y' in the ZIP or UNZIP screens wouldn't work if the file in the
  ZIP was encrypted.  This now reports a error message.

* Many of you have asked for a "Wipe all tagged directories". This has been
  added.  The value for SD.PRO for this option is 11536.

   key:389;11536;           // Would make F11 wipe all tagged directories.

* After aborting a ZIP or UNZIP, the files will no longer be reread.

* After "Executing" a file that changed the current directory, SD will now
  set the current file window to that new directory.

* Added new input routine for CHANGE DRIVE.  Added PgUp/PgDn to the
  CHANGE DRIVE window.

* 4DOS descriptions are now displayed, if that option is enabled. To enable
  4DOS descriptions, you must set the option in the setuP | Other Options
  menu.

* If a long directory was wiped in the tree display, a lockup could result.

* You can select the screen blanker delay in the setup.

* On a network, the ".." directory was not always displayed, and sorting
  the files could cause a crash.

* Pressing '%' in the tree display will now display either the directories
  percentage of the disk, the number of files in the directory, or the size
  the directory occupies.

* A new directory (MKDIR) would not always be displayed in the correct spot
  in the filelist.  Fixed.

* After a prune/graft, the bytes free was not always updated properly.

* If you want your MOUSE character to be transparent, see the setuP | Mouse
  Options menu.

* Added the '/' Locate function to the TREE display.

* To make the mouse "auto locate" on pull down menu items, set the option
  in setuP | Mouse Options.

* Changed the text input routines used in the F5 change directory function.
  The SD.DIR file is now read when F5 is pressed, or whenever the directory
  is changed, like by pressing ENTER on "..", rather than when SD is first
  run.

* Pressing TAB in a file window containing no files could cause a crash.

* The Locate function works for directories now.
     K:309;11546;      // locate files and dirs with "ALT /"

* The zipping function will now ZIP tagged directories as well as files.  You
  MUST use the -rP options.  The 'p' must be UPPER CASE, or PKZIP will
  probably not store the files the way you want them.

   DIR
     Ã XXX   Contains file xfile
     À YYY   Contains file yfile

   If the -rp is used, the ZIP file will contain

      XFILE
      YFILE

   If the -rP is used, the ZIP file will contain

      XXX\XFILE
      YYY\YFILE

* I have made several changes to the USR functions.  I added a PgUp and PgDn
  functions, and added a scrollbar.

* USR functions should now work with the mouse or the keyboard.

* New SD.INI item added:    SkipDrives = bcd
  This would not check the validity of drives B:, C: or D:.  Some of you
  have told me that you cannot log onto Bernoulli drives, or optical
  disks, so you can now force SD to skip checking these drives.

* If a file was viewed in the ZIP/UNZIP screen, the file could not be
  extracted unless you returned to the main screen, or changed a unzip
  option.  Fixed.

* The SPAWN routines are new, they are provided by Ralf Brown.  They are
  free routines, and they work really well.  These are the routines that
  run other programs, and automatically write SD.EXE to memory or disk.

* The 4DOS descriptions should update properly when copying files.

* Added

    USRScrollable = false

  to SD.INI.  This makes it so no scrollbar will appear for the USR area.
  The items can still be scrolled with the keyboard.

* You can now specify 'k' as an option in a USR definition.  So if you run
  a program that takes several ESC's to exit, sometimes SD would catch a few
  extra ESC's and SD may exit.  So you can now specify 'k' to clear the
  keyboard after running an external program.

   USR: VPIC;k;vpic %f    (Run VPIC on the highlighted file, clear the
                           keyboard when returning to SD)

* The statistics displayed after a disk is formatted are now cleared after
  each disk is formatted.

* The Change directory screen now has a F2 Reload list function.  Pressing F2
  will reload the original list from the disk.

* Rereading the directory after running an external program wasn't working
  properly, this has been fixed.

* The arrow keys didn't work properly in TAG BY DATE, fixed.

* Changed the print buffer size from 62K to 2K so it is easier to
  abort a print.

* Made some changes in the Prune and Graft code.  Some people have reported
  that when Pruning and Grafting, only the first file in each directory is
  copied.  I have been unable to duplicate this problem, so please let me
  know if you run across this problem.

* If you want to toggle the 4DOS description display, add this to SD.PRO:

    KEY:4;11060;        // CTRL D toggles 4DOS display

* The code for modifying 4DOS descriptions is 11070.  So add this to SD.PRO
  to make the '4' key modify the current files 4DOS description.

    KEY:52;11070;

  After you edit a 4DOS description, it is displayed on the screen if
  you have 4DOS descriptions being displayed (see toggling the 4DOS display
  above).  The changes are also saved to disk.

* If you had a USR item with the WAIT option set, if may not have worked
  properly.  This has been fixed.

* When CONFIRM DELETE is enabled, you could press F1 to delete a file, or F2
  to skip the file.  You can now also press ESC to abort the delete if you
  are deleting several files.

* If two file windows were open, a copy to a new filename would only
  display the file in the other file window.  This has been fixed so that
  the filename is displayed in both windows.

* The bottom line of the screen is now programmable.  See the end of the
  SD.PRO file for examples.

* Changing to a removable hard disk that wasn't ready would cause a crash.
  This has been fixed.

Here is a listing of legal programmable values:

DELETE_BAK                  4000   // Delete *.BAK, entire disk
DELETE_SPEC                 4001   // Delete specified files
DELETE_L_BAK                4003   // Delete Local *.BAK
DELETE_HIGH_NO_CONFIRM      4004   // Delete highlighted file, no confirm
DELETE_HIGH_CONFIRM         4005   //                          w/confirm
DEL_ALL_NO_CONFIRM          4006   // Delete tagged files, no confirm
DEL_ALL_CONFIRM             4007   //                      w/confirm
DELETE_SPEC_PASSED          4008   // Delete Specified from entire disk

TYPEALL                     4011   // Display all tagged files
TAG_BY_DATE                 4012   // Tag By Date Window
TAGALL                      4013   // Tag all files
EDITALL                     4015   // Edit all tagged files
COMPARE                     4016   // File Compare
LOADTAGFILE                 4017   // Load a tag file

BATCHTAG                    4020   // Tag by filespec (name)
BATCHCLEAR                  4021   // Clear
SIZETAG                     4022   // Tag by size
SIZECLEAR                   4023   // Clear
DATETAG                     4024   // Tag by date
DATECLEAR                   4025   // Clear
TODAYTAG                    4026   // Tag files with todays date
TODAYCLEAR                  4027   // Clear
ARCHIVETAG                  4028   // Tag file with ARCHIVE bit set
ARCHIVECLEAR                4029   // Clear
REVERSETAGS                 4030   // Reverse all tags
REMOVETAGGEDFILES           4031   // Remove tagged files from the display
TAG_MODE                    4032   // Sets Tag mode
CLEAR_MODE                  4033   // Sets Clear mode
CLEAR_ALL_TAGS              4034   // Clear all tags

ABOUT_SD                    11000  // About Box display
CHANGE_COLORS               11001  // Change Colors Window
RUN_PKZMENU                 11004  // Run PKZMENU (A shareware program)
TOUCHFILES                  11005  // Stamp time/date of tagged files
DISKSTATS                   11006  // Disk Statistics Window
RESET_MOUSE                 11007  // Reset (after running external program)

REMOVE_DIR                  11050  // Remove directory
MAKE_DIR                    11051  // Make Directory
DOS_CALL                    11052  // External DOS Call
DOS_SHELL                   11053  // DOS Shell, type EXIT to return to SD
RENAME                      11054  // Rename file(s)
FIND_FILE                   11055  // Activate the file finder
ALLDRIVEINFO                11056  // Information on all disk drives
_4DOS_DESCRIPTIONS          11060  // Toggle 4DOS description display
MODIFY_4DOS                 11070  // Modify a 4DOS description

DRIVE_A_B                   11100  // Change to Drive A:, use 11101 for B:
DRIVE_C_D                   11102  //
DRIVE_E_F                   11104  //
DRIVE_G_H                   11106  //
DRIVE_I_J                   11108  //
DRIVE_K_L                   11110  //
DRIVE_M_N                   11112  //
DRIVE_O_P                   11114  //
DRIVE_Q_R                   11116  //
DRIVE_S_T                   11118  //
DRIVE_U_V                   11120  //
DRIVE_W_X                   11122  //
DRIVE_Y_Z                   11124  //

COPY_TO_A                   11150  // Copy tagged files to A:
COPY_TO_B                   11151  //
COPY_TO_C                   11152  //
COPY_TO_D                   11153  //
COPY_TO_E                   11154  //
COPY_TO_F                   11155  //
COPY_TO_G                   11156  //
COPY_TO_H                   11157  //
COPY_TO_I                   11158  //
COPY_TO_J                   11159  //
COPY_TO_K                   11160  //
COPY_TO_L                   11161  //
COPY_TO_M                   11162  //
COPY_TO_N                   11163  //
COPY_TO_O                   11164  //
COPY_TO_P                   11165  //
COPY_TO_Q                   11166  //
COPY_TO_R                   11167  //
COPY_TO_S                   11168  //
COPY_TO_T                   11169  //
COPY_TO_U                   11170  //
COPY_TO_V                   11171  //
COPY_TO_W                   11172  //
COPY_TO_X                   11173  //
COPY_TO_Y                   11174  //
COPY_TO_Z                   11175  //

EXITCNOW                    11200  // Exit to current directory
EXITSNOW                    11201  // Exit to startup directory

SORT_BY_NAME                11300  // Sort by Name, use 11301 for descending
SORT_BY_EXT                 11302  //         Extension
SORT_BY_DATE                11304  //         Date
SORT_BY_SIZE                11306  //         Size
SORT_UNSORTED               11308  //         Unsorted
SORT_TAGGED                 11310  //         Tagged

LOAD_PRO_FILE               11350  // Load a new .PRO file

COPY_TO_OTHER               11400  // Copy to other window
MOVE_TO_OTHER               11500  // Move to other window

BYTESINDIRECTORY            11504  // Show the bytes used in the directory
FORMAT                      11505  // Format a floppy disk

ENLARGEWINDOW               11510  // Increase window size
DECREASEWINDOW              11511  // Decrease window size
OPEN_CLOSE_WINDOW           11512  // Open/Close a window
CHANGEWINDOWS               11513  // Change to the other window

ZIPVAL                      11520  // Open the ZIP full screen window
UNZIPVAL                    11521  // Open the UNZIP full screen window

PRINTVAL                    11530  // Print files
WIPE                        11535  // Wipe directory
WIPEALLTAGGED               11536  // Wipe all tagged directories
LISTFILE                    11540  // Create a list file
LOCATEFILE                  11545  // Locate a file by name
LOCATEFILEDIR               11546  // Locate a file or a directory by name
NEWDIR                      11565  // Reread the current directory
COPYFILE                    11570  // Copy tagged files
MOVEFILE                    11575  // Move tagged files

TYPEFILE                    11585  // View a file
EDITFILE                    11590  // Edit a file
HELPSCREEN                  11595  // Display help screen
TREEFILE                    11596  // Activate tree display, use .TRE file
TREEREREAD                  11605  // Activate tree display, read disk
SORT_MENU                   11610  // Pop up the sort menu

CHANGEDRIVE                 11600  // Change drive window
DELETEMENU                  11601  // Activate the delete menu
CHANGEATTR                  11602  // Activate the Change Attribute window
EXECUTEFILE                 11603  // Run a program
USR_MENU                    11604  // Enter the USR area
FILE_COMPARE                11606  // Compare files
CHDIR_PASSED                12000  // Change to the specified directory
CHDIR_PASSED_OPEN           12001  // Open a window, chdir to the passed dir

* The "delete highlighted" didn't work properly if CONFIRM was selected.

* The Key commands to change drives didn't work properly.

* A new command has been added to open a second window and change to a
  specified directory.  The following shows two examples:

  usr: PCPLUS;12001;D:\PCPLUS // Open a second window and change to D:\PCPLUS
  key:1;12001;e:\dbase    // CTRL A will open a window and change to e:\dbase

* Added the ability to display the date of files in the YY-MM-DD format.

* Added commas to the filesize if the filesize is less than 1MB.

* The deleting of a ReadOnly file didn't work properly.

* Added a Secondary Sort option to the setup so you can configure a default
  secondary sort.

* NOTE: When you specify a program to view and edit files, you should specify
  the entire program name.  For example, if you use LIST.COM, and you
  currently specify

     LIST %f

  change this to:

     LIST.COM %f

  The routines I use seem to get confused if there is another file called
  LIST in the current directory.  The routines will call the LIST. file
  rather than LIST.COM, unless the .COM is specified.

* If you tried to UNZIP a non-zipfile, you get a "Bad ZIP File" message. If
  you then tried to LIST the file, you were not able to because the file had
  not been closed.  Fixed.

*** End of File ***
