Follow these instructions if GOLFDEMO does not give you any sound, and
you have an installed soundcard in your machine.

[1] If your sound card is not 100% Soundblaster or Ultrasound
compatible, then you may not be able to get sound from this product.

[2]  To initialise your Soundblaster or Ultrasound card you will
have to add a SET BLASTER or SET ULTRASND line in your AUTOEXEC.BAT
file.  (You will normally find this in the root directory of your
C: drive.)

[3]  Please refer to your sound card's documentation for precise 
instructions on how to install your sound card. However, the 
following summary for Soundblaster compatibles may help:

[4]  The line in AUTOEXEC.BAT should be of the type:

SET BLASTER=A220 I7 D1 H7 T6

where:
The three digits after A refer to the I/O range of your sound card.
The digit after I refers to the Interrupt Request number of your card.
The digit after D refers to the Low DMA setting of your card.
The digit after H refers to the High DMA of your card.
and
The digit after T refers to the type of soundcard you are using:
i.e. 	T=1 where you have a Soundblaster 1.x or compatible
	T=2, 4 or 5 where you have a Soundblaster Pro or compatible
	T=3 where you have a Soundblaster 2.0 or compatible
	T=6 where you have a Soundblaster 2 or AWE 32 compatible

[5]  If your machine locks up during sound initialisation, it will
automatically disable sound on the next attempt unless you alter the
settings. This is so that the game will safely run.

[6]  We hope that these considerations do not interfere with your
enjoyment of the product.