; Car Modify help text
;

htxt000:	Shorter, tighter tracks require more acceleration and
		better fuel economy. High speed tracks require greater
		horsepower.
		0
						
htxt001:	Gears should be selected so that the maximum amount of
		acceleration is achieved when exiting corners. Top gear
		should be set for fuel efficiency.
		0

htxt002:	For a high speed oval use a compound that has good
		stopping power but high wear rates. On a twisty road
		coarse select a set with long wear times and resistance
		to fading.
		If you experience oversteer while braking, add front bias.
		0

htxt003:	Stiffening the front springs will add understeer.
		Stiffening the  rear springs will add oversteer.
		Stiffening front dampers increases understeer in bumpy turns.
		Stiffening rear dampers	increases oversteer in bumpy turns.
		Stiffening front anti-roll bar adds understeer.
		Stiffening rear anti-roll bar adds oversteer.
		0

htxt004:	Adjust the tank size so that the minimum amount of fuel is
		used to fill the tank at each stop.
		0

htxt005:	Decrease Steer Ratio	to make wheels turn faster.
		Increase Steer Lock to increases the amount of steering
		available.
		Increasing Steer Scale reduced steering the faster you go.
		0

htxt006:	Increase front wing increased oversteer.
		Increase rear wing to add understeer.
		0

htxt007:	Tire pressure is used to make minor adjustments to tire
		temperature and to add small amounts of understeer or
		oversteer.
		Camber affects a tire's cornering force and should be set
		to achieve the highest forces.
		Toe affects the steer characteristics of the car and are
		typically set near zero.
		0

htxt008:	By analyzing the telemetry data it is possible to determine
		what forces are acting on the car, what the driver was doing
		at the time, and how the car responded.
		0

htxt009:	The High Speed Oval is used for testing aerodynamic effects,
		engines, and handling at high speeds.
		The Skid Pad is used for testing steady state cornering and
		tire grip.
		The Braking track is used for testing both 1/4 mile speed
		and braking distance.
		The Handling track allows you to test transient handling
		properties.
		0

htxt010:	You will typically want a different setup for each track
		and each car.
		0

htxt011:	The Paint Shop is used to customize the look of a car.
		0