None
Sound Blaster FM (OPL2)
SB Pro/16, PAS 16 (OPL3)
Sound Blaster AWE32/64
Sound Master II
General MIDI
Gravis Ultrasound
Gravis Ultrasound Max
Pro Audio Spectrum/16
SB16/AWE 16bit Driver
Auto Detect Sound Hardware
Attempts to automatically determine sound hardware installed.
Change Digital Sound Card
Select the type of sound card to use for digital Sound.
Test Digital Sound Card
Test the current digital sound card selection.
View README file
View important information on Descent To Undermountain.
Exit
Exit the installation program.
Continue with Auto Detection
Return to Main Menu
Select this sound card
Do not use these values
Yes
No
 Auto detection of hardware may cause your computer  to hang.  If you choose to continue, and your       computer hangs, reset and then select your sound    and music card manually.\n\n Additionally, auto-detection may not always         correctly detect general midi devices, such as the  AWE32, correctly. Use 'Change Music Card' from the  main menu to select the correct device for music    playback.
 Sound Information
 Main Menu
 Description
 Select Sound Card
 Select Music Card
 WARNING!! WARNING!!
 Select IRQ
 Select DMA
A sound card was not detected.  Hit Enter to return to main menu
Error getting device settings.  Please enter sound card values manually.
Can't test sound -- no sound card selected.
Can't test music -- no music card selected.
(* means value not required)
Cannot get handle for digitest.\nYou will be unable to test digital sound.
Cannot get handle for midi song.\nYou will be unable to test music.
 Select Port
Looking for Sound Card
Save changes?
 Descent To Undermountain Setup (v%s) -- (C) 1997, Parallax Software Corp.
Auto detection found the following:\n\nCard: %s\nPort: %x\nIRQ: %s\nDMA: %d\n\nMusic Card: %s\nPort: %s
Undefined
default
Sound
Port
Irq
DMA
Music
Port
Channels reversed
Error:  HMI drivers not present in current directory.\n
HMI Sound Driver
Type DTU to run Descent to Undermountain.
Cursor keys to move, / to search, ESC to quit
 Enter string to search for (case does not matter)
String not found.  Press any key to continue.
Hit ESC to stop testing
Testing center channel...
Testing left channel...
Testing right channel...
Accept values and return to main menu
Reverse channels
Play sound samples again
Done testing sound samples.  If you did not hear\nthe left and right channel tests on the appropriate\nside, reverse the channels.  If you did not hear\nany sound at all, you have not chosen the correct\nsound card.\n
Error
Testing music... Press any key to quit.
Unable to open dtu.cfg for writing.\n \nCheck attributes on file and try again
Sound Blaster Pro
Sound Blaster Pro Mono
.