DUNE II: THE BUILDING OF A DYNASTY

		     Multiple Sound Device Patch (Beta)
	  
				  (09/22/93)      

This patch will allow you to play DUNE II music and sound effects on more
than one audio sound device at one time.  Simply follow the directions
listed below.  

ATTENTION!  THIS IS AN OPTIONAL PATCH.  IT IS NOT REQUIRED TO PLAY THE GAME. 

It is intended only for users that own and use more than one sound device
or card at a time.  If you only use one sound device, you do not need this 
patch.


1. Backup the following files...  
   DUNE.CFG, SETUP.EXE, and SETUPENG.DIP

   These files can be found on your hard drive in the directory where you 
   installed Lands Of Lore.


2. Copy the new SETUP.EXE, and SETUPENG.DIP into the directory 
   where DUNE II is stored.


3. Run SETUP.EXE and configure your sound devices.  When using two different
   sources for sound output, memory requirements will be high.  To run DUNE II 
   we recommend at least 621,000 bytes of free lower memory.  It is 
   enitrely possible that your configuration will require more or less than
   this amount, so don't be afraid to experiment to find your optimal setup. 


4. Exit out of the SETUP.EXE program after you have made all of your choices.  


After exiting out of the SETUP.EXE program, simply type DUNE2 to start the game.

PLEASE REMEMBER that this is a beta version of the mixed sound support patch.
We appreciate your comments regarding any mixed sound problems you may
encounter.
 
CREATIVE LABS WAVEBLASTER OWNERS:

      As of 09/22/93 this patch has been updated to support Sound Blaster 16     
      and Wave Blaster owners.  To receive mixed sound support (digitized  
      sound from the SB16, and music from the Wave Blaster) do the following:

      1.  Follow steps 1 - 3 as shown above.
      
      2.  In the SETUP program assign sound (music) option to 
	  Sound Canvas (General MIDI), sound effect option to SBPRO, and 
	  digitized option to SBPRO.
	  
      3.  After exiting SETUP.EXE, copy the files WAVESET.BAT and WAVESET.DAT
	  to your LANDS of LORE directory.

      4.  Type WAVESET anytime you wish to play DUNE II in
	  Wave Blaster/SB16 mode.         
	 
-Westwood Studios Audio Department-