1	RIVA TNT
2	Additional %s Properties
3	Are you sure you want to permanently delete the setting "%s"?
4	%s KB
5	Bilinear
6	8-tap anisotropic
7	Please enter a name for this setting.
8	More Direct3D
10	Best image quality
11	High image quality
12	Blend
13	High Performance
14	Best Performance
15	%s MB
16	PCI
17	AGP
18	%u MHz
21	<Unavailable>
40	Not present
41	Unknown
42	NTSC
43	PAL
44	SECAM
45	HDTV
46	%s%%
47	%s%s°
65	Off 
66	Low
67	Medium
68	High
69	Max
70	Off
71	Low
72	Moderate
73	High
75	Auto-Select
76	Always Off
77	Always On
78	AGP  (PCI mode)
80	Chrontel
81	Chrontel 7000 Family
82	Chrontel 7003
83	Chrontel 7004
84	Chrontel 7005
85	Chrontel 7006
86	Chrontel 7007
87	Chrontel 7008
88	Conexant
89	Conexant Bt868
90	Conexant Bt869
91	Conexant CX25870
92	Conexant CX25871
93	Philips
94	Philips 7100 Family
95	Philips 7102
96	Philips 7103
97	Philips 7108
98	Philips 7109
99	Philips 7108B
100	NVIDIA Integrated
124	Chrontel 7009
125	Chrontel 7010
126	Integrated (MV)
127	Integrated
128	Chrontel 7011
129	Chrontel 7012
130	Red
131	Green
132	Blue
133	All channels
135	Use Block Transfer
136	Use Page Flip
137	Auto-Select
138	&Contrast
140	Philips 7108A
141	Philips 7109A
142	Philips 7104
143	Philips 7105
144	Conexant CX25872
145	Conexant CX25873
146	Conexant CX25874
147	Conexant CX25875
150	Your flat panel display has a maximum resolution of %u x %u.
151	Windows will now switch your desktop to the selected settings. This may take several seconds. If Windows does not reappear correctly, wait 15 seconds and your original settings will be restored.
152	The screen has been reset to its default position.
153	Unlike external computer monitors, LCD display panels have one particular Screen Resolution setting that looks best.  It is recommended you set your Screen Resolution to %ux%u.
200	(Combination) N/PAL
201	B/PAL
202	D/PAL
203	I/PAL
204	M(Japan)/NTSC
205	M/NTSC
206	M/PAL
207	N/PAL
208	G/PAL
209	H/PAL
210	K1/PAL
211	B,D,G,H,I/PAL
212	[PAL only]
213	SECAM
214	HDTV
215	HDTV 480i
219	HDTV 1080p
300	Country/Region
301	Format
302	Windows will now set your hardware to match the settings you have specified. The screen may become blank for several seconds during this process.\n\nTo avoid potential problems with the hardware, do not turn off your computer during this process!
303	Description
304	Filename
305	Version
306	HDTV 720i
400	Auto-Select
401	Composite Video-Out
402	S-Video-Out
403	Direct3D Settings
404	OpenGL Settings
405	Overlay Controls
406	NVRotate
407	nView Display Mode
408	3D Antialiasing Settings
409	Desktop Utilities
411	Performance & Quality Settings
412	Additional Information
413	Refresh Rate Overrides
414	Device Selection
415	Colour Correction
416	Flat Panel Display
417	Clock Frequencies
418	TV Output
420	Off
421	2
422	3
423	4
424	5
440	3D Antialiasing Settings
441	Accuview Antialiasing Settings
500	Intel x86 Compatible
501	Intel Pentium(r)
502	Intel PentiumPro(r)
503	Intel Celeron(tm) or Xeon(tm)
504	Intel Celeron(tm)-A
505	Intel Pentium(r) II
506	Intel Pentium(r) III
507	Intel Pentium(r) 4
508	Intel Itanium(r)
509	AMD K5
510	AMD K6
511	AMD K6-2
512	AMD K6-3
513	AMD Athlon(tm)
514	AMD Duron(tm)
515	Cyrix MediaGX
516	Cyrix 6x86 Family
517	Cyrix MII Family
518	IDT WinChip C6
519	IDT WinChip 2
520	with MMX(tm)
521	with 3DNow!(tm)
522	with SSE
523	with SSE2
600	No DirectX installed
617	DirectX 9.0 or better
650	Unknown version of DirectX installed
1000	NVIDIA (Unknown)
1001	RIVA TNT
1002	Vanta
1003	TNT2 Model 64
1004	RIVA TNT2
1005	RIVA TNT2 Pro
1006	TNT2 Ultra
1007	GeForce 256
1008	GeForce DDR
1009	Quadro
1010	Aladdin TNT2
1011	GeForce2 MX/MX 400
1012	GeForce2 MX 100/200
1013	Quadro2 MXR/EX
1014	GeForce2 GTS
1015	GeForce2 Ultra
1016	GeForce2 Ti
1017	Quadro2 Pro
1018	GeForce2 Go
1020	GeForce3
1021	GeForce2 MX 100/200
1022	GeForce2 MX 100
1023	GeForce2 MX 200
1024	GeForce2 MX 400
1025	GeForce2 Integrated GPU
1026	Quadro DCC
1027	GeForce3 Ti 200
1028	GeForce3 Ti 500
1029	NV17
1030	NV17-1
1031	NV17-2
1032	NV17-3
1033	GeForce4 440 Go
1034	GeForce4 420 Go
1035	NV17M
1036	GeForce4 420 Go 32M
1037	GeForce4 440 Go 64M
1070	Fixed
1071	Grow Only
1072	Dynamic
1073	NVIDIA nForce
1074	220D SDRAM
1075	420D SDRAM
1076	220D DDR-RAM
1077	420D DDR-RAM
1078	with Dolby(R) Digital
1079	220
1080	420
1081	SDRAM
1082	DDR
1090	Additional OpenGL Properties
1091	Use Shutter Glasses
1092	Use Vertical Interlace monitor
1093	Use nView Clone mode
1094	Use on-board DIN connector
1095	Use on-board DIN connector on DAC 1
1096	Use blue-line-code for StereoGraphics(R) products
1100	Colour-Indexed Overlays (8 bpp)
1101	RGB Overlays (RGB555 format)
1102	Colour-Indexed (8 bpp) and RGB555 formats
1114	The Full-Screen Video Mirror feature requires the nView mode to be set to Clone or Extended Desktop.\nClick OK below and navigate to the nView page to select Clone mode from the available nView display modes.
1115	Full-Screen Video Mirror
1116	The Full-Screen Video Mirror feature requires the nView mode to be set to Clone.\nClick OK below and navigate to the nView page to select Clone mode from the available nView display modes.
1117	Custo&m OpenGL Applications Setting:
1118	Application Settings
1900	Stereo Game Configuration
1901	Game &Name:
1902	Stereo Value Rating:
1903	Stereo Compatibility Rating:
1904	Rating Key: 1 (Excellent) - 5 (Poor)
1905	Co&mments:
1906	A&dvanced Settings...
1907	Configure &Hot Keys...
1908	Help
1909	Close
1910	Advanced Game Configuration
1911	Game Name:
1912	Config Values
1913	Demo
1914	ID Key:
1915	Change...
1916	Clear
1917	Full Game
1918	ID Key:
1919	Change...
1920	Clear
1921	OK
1922	Cancel
1923	&Apply
2000	NVIDIA (Unknown)
2001	RIVA TNT
2002	RIVA TNT2
2003	Vanta
2004	Vanta LT
2005	TNT2 Model 64
2006	RIVA TNT2 Pro
2007	TNT2 Ultra
2008	Aladdin TNT2
2009	GeForce 256
2010	GeForce DDR
2011	Quadro
2012	GeForce2 MX
2013	GeForce2 MX 100
2014	GeForce2 MX 200
2015	GeForce2 MX 100/200
2016	GeForce2 MX 400
2017	GeForce2 MX/MX 400
2018	GeForce2 Go
2019	Quadro2 MXR
2020	Quadro2 EX
2021	Quadro2 MXR/EX
2022	GeForce2 Integrated GPU
2023	GeForce2 GTS
2024	GeForce2 Ultra
2025	GeForce2 Ti
2026	GeForce2 Pro
2027	Quadro2 Pro
2028	Quadro2 Pro
2029	Quadro2 Go
2030	GeForce3
2031	GeForce3 Ti 200
2032	GeForce3 Ti 500
2033	Quadro DCC
2034	NV17
2035	NV17M
2036	GeForce4 440 Go
2037	GeForce4 420 Go
2038	GeForce4 420 Go 32M
2039	GeForce4 440 Go 64M
2040	GeForce4 MX 460
2041	GeForce4 MX 440
2042	GeForce4 MX 420
2043	Quadro4 500/550 XGL
2044	Quadro4 200 NVS
2045	Quadro4 400 NVS
2046	Quadro4 550 XGL
2047	GeForce4 Ti 4600
2048	GeForce4 Ti 4400
2049	GeForce4 Ti 4200
2050	Quadro4 900 XGL
2051	Quadro4 750 XGL
2052	Quadro4 700 XGL
2053	Quadro4 200/400 NVS
2054	Quadro4 500 GoGL
2130	Stereo Properties
2131	Stereo &Enable Mode
2132	Enabled
2133	Enabled by Hot Key
2134	Disabled
2135	Stereo T&ype
2136	Page Flipped
2137	Anaglyph
2138	S&tereo Separation
2139	Beginner
2140	Advanced
2141	25%
2142	Stereo &Gamma Setting
2143	1.0
2144	Stereo &Viewer...
2145	&Medical Test Image...
2146	Advanced Stereo Properties
2147	Hot Key Setup
2148	Laser Sight
2149	&On for Configured Games
2150	O&ff for All Games
2151	LaserSight
2152	100%
2153	&Transparency
2154	&Browse...
2158	Anaglyph Stereo...
2159	Separation
2160	Gamma
2161	Anaglyph
2162	Left Eye
2163	Right Eye
2164	Filter Color Setup
2168	Stereo Setup & Test
2169	&Bit Depth
2170	16 bits per pixel
2171	32 bits per pixel
2172	&Monitor Size
2173	19.0"
2174	&Resolution
2175	1600x1200
2176	S&tereo Refresh Rate
2177	120 Hz
2178	Misc. Options
2179	Always &use Stereo Refresh Rate
2180	&Save Setting
2181	S&et Rate For All Resolutions
2182	Re&vert To Saved
2183	&Launch Test Application...
2184	Game Configuration Hot Keys
2185	&Enable In-Game Configuration
2191	Convergence
2192	Screen Depth
2193	Backplane
2194	Settings and Config
3804	Dualview
3805	Standard (Dualview)
5001	(Empty) 
5002	Media Centre Properties
5003	About
5004	Adjust Display Properties
5005	Custom Direct3D Settings
5006	Custom Colour Settings
5007	NVIDIA Media Centre
5008	Restore Driver Defaults
5009	Restore Hardware Defaults
5010	Unable to start the applet. Please ensure that the software has been properly installed on your system.
5011	Media Centre
5012	Media Centre Properties
5013	The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start a Direct3D application.
5014	The default Direct3D settings have been restored.
5015	The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start an OpenGL application.
5016	The default OpenGL ICD settings have been restored.
5017	Custom OpenGL Settings
5018	Display %u
5019	Unable to find the file NVDESK32.DLL. The Desktop Manager features will be unavailable.
5020	Dynamic link failure in NVDESK32.DLL. The Desktop Manager features will be unavailable.
5021	Program Files
5022	Select an application
5023	The hot key you have selected is a single key without a CTRL, SHIFT, or ALT key used in combination. Only function keys can be assigned as single-key hot keys.\n\nPlease select a different hot key for this action.
5024	The hot key you have selected is a single key with the SHIFT key as a modifier. You may use a SHIFT + single-key combination only if the Single-Key is a function key.\n\nPlease select a different hot key for this action.
5025	The hot key you selected is already in use.\n\nPlease select a different hot key for this action.
5026	nView Desktop Manager
5028	The Desktop Manager is currently enabled, but the system must be\nrestarted to enable all Desktop Manager functionality.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5029	The Desktop Manager is currently disabled, but it will remain in your\ncomputer's memory until the system is restarted.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5031	The settings "%s" have been successfully applied.
5032	The default colour settings have been restored.
5040	Desktop Manager Enabled
5042	Desktop Manager Disabled
5044	Desktop Manager Properties
5050	TV Output
5060	nView Properties
5061	nView Desktops
5062	nView
5063	Enable nView
5064	Disable nView
5065	Open nView properties panel
5066	nView Profiles
5070	Rotation Settings
5071	Rotation Enabled
5072	Rotation Disabled
5073	Rotate 0 degrees
5074	Rotate 90 degrees
5075	Rotate 180 degrees
5076	Rotate 270 degrees
5077	The rotation cannot be applied with the current resolution.
5078	Apply colour settings to all rotation angles
5079	Applying rotation failed because an active application is blocking the rotation. Please close the application and try again.
5090	Wizard Error - There was a problem accessing your registry -
8002	Color Correction
8006	Device Selection
8014	Vertical Flicker
8015	Horizontal Flicker
8016	Horizontal Luminance Flicker
8017	Horizontal Chrominance Filter
8018	Dynamic Flicker Filter
8030	Overlay Settings
8037	Disable
8038	Primary display
8039	Secondary display
8040	Auto-Select
8041	Track Overlay Aspect
8042	Source Aspect
8043	Full-Screen
8044	TV 4:3
8045	Anamorphic 16:9
8046	Video Overlay
8047	Video Mirror
8048	Both
8056	Changing your Video viewing preference will cause the displays to momentarily become blank on your system\nDo you want to continue?
8057	Run an application that plays video using Software Overlay to see the effect.
8073	Error initialising Personal Cinema Setup.
8074	Click OK to enable Personal Cinema TV Viewing and Video Capture feature.
8076	Desktop Settings
8078	8 Bit\n16 Bit\n32 Bit\nResolution\nRefresh Rate\n
8079	320 x 200\n400 x 300\n480 x 360\n512 x 384\n640 x 400\n640 x 480\n800 x 600\n848 x 480\n1024 x 768\n1152 x 864\n1280 x 720\n1280 x 768\n1280 x 960\n1280 x 1024\n1360 x 768\n1600 x 900\n1600 x 1024\n1600 x 1200\n1920 x 1080\n1920 x 1200\n1920 x 1440\n2048 x 1536\n
8080	Default\n60 Hertz\n70 Hertz\n72 Hertz\n75 Hertz\n85 Hertz\n100 Hertz\n120 Hertz\n
10000	Argentine Republic
10001	Belgium
10002	Denmark
10003	Finland
10004	Germany (Federal Republic of)
10005	Guinea (Republic of)
10006	Hong Kong
10007	India (Republic of)
10008	Indonesia (Republic of)
10009	Italy
10010	Malaysia
10011	Netherlands (Kingdom of the)
10012	Norway
10013	Portugal
10014	Singapore (Republic of)
10015	Spain
10016	Sweden
10017	Switzerland (Confederation of)
10018	China (People's Republic of)
10019	Korea (North)
10020	Denmark
10021	Finland
10022	Germany (Federal Republic of)
10023	Italy
10024	Malaysia
10025	Netherlands (Kingdom of the)
10026	Norway
10027	Portugal
10028	Spain
10029	Sweden
10030	Switzerland (Confederation of)
10031	Belgium
10032	Hong Kong
10033	United Kingdom
10034	Guinea (Republic of)
10035	Japan
10036	Canada
10037	Chile
10038	Colombia (Republic of)
10039	Costa Rica
10040	Ecuador
10041	Haiti (Republic of)
10042	Honduras
10043	Korea (Republic of, South)
10044	Mexico
10045	Panama (Republic of)
10046	Puerto Rico
10047	Taiwan
10048	United States of America
10049	Venezuela (Republic of)
10050	Brazil (Federative Republic of)
10051	Paraguay (Republic of)
10052	Uruguay (Eastern Republic of)
10053	France
10054	Peru (Republic of)
10055	South Africa (Republic of)
10056	Australia (Commonwealth of)
10057	New Zealand
10058	Saudi Arabia (Kingdom of)
10059	United Arab Emirates
10060	Thailand
12000	Enable fog table emulation
12001	Adjust Z-buffer depth to rendering depth if unequal
12002	Enable alternate depth buffering technique
12003	Display logo when running Direct3D applications
12004	Use DirectX 5 compatibility mode
12005	Force trilinear filtering
12006	6xS
12007	8xS
12008	4xS
12009	(Direct3D only)
12010	8X
12011	16X
12050	Please note that full-scene antialiasing and the use of a unified back/depth buffer or window flipping are mutually exclusive.\n\nIf you want to enable the unified back/depth buffer or window flipping, full-scene antialiasing will be automatically disabled in the driver.
13000	Enable buffer region extension
13001	Allow the dual planes extension to use local video memory
13002	Use fast linear-mipmap-linear filtering
13003	Enable Anisotropic filtering
13004	Enable alternate depth buffering technique
13005	Disable support for enhanced CPU instruction sets
13006	Force 16-bit depth buffer
13007	Use unified back/depth buffer
13008	Enable Advanced Multiple Monitors
13009	Enable Quadbuffered Stereo API
13010	Enable Overlays
13011	Maximize texture memory
13012	Enable conformant OpenGL texture clamp behavior
13013	Enable gamma correction for antialiased lines.
13100	Always off
13101	Off by default
13102	On by default
13200	Use desktop colour depth
13201	Always use 16 bpp
13202	Always use 32 bpp
13210	3D Antialiasing Settings
13211	Save Settings
13212	TV Output
13213	TV Settings
13214	Colour Correction
13215	Screen Adjustment
13216	Flat Panel Display
13217	Change TV Format
13218	Device Selection
13219	Direct3D Settings
13220	More Direct3D
13221	OpenGL Settings
13222	OpenGL Stereo
13223	Hardware Options
13224	Restart Required
13225	Clock Frequencies
13226	Testing new settings
13227	nView Display Mode
13228	Monitor Settings
13229	Confirm Display Settings
13230	Warning
13231	Control Panel exit required...
13232	System settings change
13233	Device Configuration
13234	Desktop Utilities
13235	Display Timing
13236	Overlay Colour Control
13237	Overlay Controls
13238	Full-Screen Video Mirroring Options
13239	PowerMizer
13240	NVIDIA nForce
13241	NVRotate
13242	Options
13243	About Taskbar Utility
14000	Display driver
14001	DirectDraw driver
14002	OpenGL installable client driver
14003	Resource Manager kernel
14004	Resource Manager 16-bit client interface
14005	Resource Manager 32-bit client interface
14006	VGA virtualization and PnP services VDD
14007	Driver display mode library
14008	Display Properties extension
14009	Taskbar utility library
14010	Display management hook library
14011	Stereo Display Properties Extension
14012	Stereo Resource File
14013	Stereo Test Program
14014	Stereo Image Viewer
14115	PnP services VDD for secondary devices
14116	Display driver miniport
14117	Display management UI library
14118	Display driver helper service
14120	Desktop management hook library
14121	Shell namespace extension library
14122	Desktop management properties panel applet
14600	Gfx Driver for 3D Studio MAX
14601	NVIDIA POWERdraft for AutoCAD 2000
14602	QuadroView Application
14610	Localized resource library
14611	Localized help file
14612	Control Panel Skins library
15010	NVIDIA Logo
15011	Monitor with Graphics Card (Blue)
15012	Monitor with Graphics Card (Red)
15110	NVIDIA
15300	CRT
15302	LCD
15304	DFP
15306	Digital Monitor
15308	Analogue Monitor
15310	Digital Flat Panel
15312	Analogue Flat Panel
15314	Flat Panel Display
15316	Laptop LCD
15318	Laptop Display
15320	Laptop Flat Panel
15322	Laptop Digital Flat Panel
15324	Tablet LCD
15326	Tablet Display
15328	Tablet Flat Panel
15330	Tablet Digital Flat Panel
15332	TV
15334	HDTV
16000	Your hardware settings cannot be applied until you have tested them.\n\nSet the desired clock frequencies and then click the "Test New Settings" button to ensure that the hardware can support your selections.
16001	Your graphics hardware will now be tested at the new clock settings for several seconds.\n\nIf your computer stops responding during this time, turn your computer off and then back on.\nYour previous settings will be automatically restored.
16002	You must restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?
16004	%u x %u pixels
16005	%u Hz
16007	Analogue Display
16008	Digital Display
16009	TV
16010	A custom setting with this name already exists.\n\n Do you wish to overwrite it with the current setting?
16011	Windows was unable to change your display settings.\n\nPlease close the Display Properties, re-enter and try again.
16020	Device Settings
16021	Device Adjustments
17001	Default Monitor
17002	Plug and Play Monitor
17010	Display Properties
17011	Settings 
17012	Reverting in %d seconds
17018	%d by %d pixels
17019	%d Hertz
17020	Windows will now apply your new display settings.  This will take a few seconds, during which time your screen may flicker.\n\nIf your new settings are not applied correctly, your original display settings will be automatically restored in 15 seconds.
17021	Display Settings
17022	Custo&m OpenGL settings:
17026	First
17027	Second
17028	Third
17029	Fourth
17030	Fifth
17031	Sixth
17032	Seventh
17033	Eighth
17035	&Analogue Display:
17036	&Digital Display:
17037	&TV:
17038	&Analogue Display
17039	&Digital Display
17040	&TV
17041	TV Encoder Type:
17042	TV Codec Type:
17051	1x
17052	2x
17053	4x
17054	8x
17055	Use these control to select the degree of antialiasing to be used in OpenGL applications.
17056	PCI Mode
17058	Enabled
17059	Disabled
17060	%d. %s %s  %d x %d, %dBPP, %d Hz
17061	 nView Display %d: %s %s
17062	 nView Display %d: %s %s  %d x %d, %dBPP, %d Hz
17063	 %d. %s %s %s
17064	%d x %d, %dBPP, %d Hz
17065	%d x %d
17066	Settings
17067	Desktop Area
17068	Stereo applications cannot be used in nView Clone mode; disabling stereo.
17069	Notification
17070	3D Antialiasing Settings
17071	Accuview Antialiasing Settings
17072	Application controlled
17073	Off (no antialiasing)
17074	Quincunx Antialiasing(tm)
17075	4x, 9-tap Gaussian
17076	4xS (Direct3D only)
17077	Enable Texture Sharpening
17080	Profiles
17200	Intel
17201	Intel 440LX
17202	Intel 440BX
17203	Intel 440GX
17204	Intel 815
17205	Intel 820
17206	Intel 840
17207	Intel 850
17208	Intel 860
17230	VIA
17231	VIA 8371
17232	VIA 82C694X
17233	VIA KT133
17250	AMD
17251	AMD 751
17252	AMD 761
17253	AMD 762
17270	RCC
17271	RCC 6585HE
17275	Micron
17276	Micron SAMDDR
17280	NVIDIA nForce
18019	Help
18020	NOT RECOMMENDED FOR STEREO GAME PLAY
18021	NOT AVAILABLE
18022	No executable to associate %s with.
18023	Error Updating Stereo Information
18024	An entry exists for %s linking it to %s, change?
18025	Updating Stereo Information
18026	No entry exists for %s, unable to associate %s.
18027	Executable Files
18028	Find New Exeutable File
18029	N\A
18030	Incorrect 3D object placement
18031	Text/Objects are small and difficult to use
18032	Objects clipped at sides of monitor
18033	Incorrect clipping of subviews
18034	Mixed 2D and 3D objects in Pop-up or HUD
18035	Gunsight or Pointer is 2D object
18036	Issues with setup screens with stereo on
18037	Text highlight for 3D objects is at incorrect depth
18038	Bright colors on dark background produce ghosting
18039	Excessive use of 2D makes stereo look flat
18040	Bad choice of depth for HUD/Pop Up Screens
18041	Unknown PFIssue
18042	Bitmap Files
18043	All Files
18044	Find Laser Sight Bitmap
18045	Bitmap file must be 64x64
18046	Error Setting Laser Sight
18047	File is not a valid bitmap file
18048	This is not an NVIDIA video card.\nSome functions may not operate properly.
18049	Error Determining Display Type
18050	Unable to determine if this is an NVIDIA video card.\nSome functions may not operate properly.
18053	Please close any DirectX or OpenGL applications and hit OK
18054	Stereo Applications Enable
18055	Failed!
18060	Choose this option to enable Stereo automatically when the application starts. The hot keys can still be used to turn Stereo on or off.
18061	Choose this option to enable and disable Stereo by using the hot keys.
18062	Choose this option to disable Stereo.
18063	Adjust the stereo separation, or relative distance between left and right images, according to your expected comfort level.
18064	Set this slider according to your monitor size to allow maximum separation range, and prevent excessive separation.
18065	Application for viewing JPS images in stereo.
18066	Take this test to determine if you can see stereo images.
18067	Test the stereo display quality of your monitor under different display modes to determine the optimum stereo refresh rate for your system.
18068	View the stereo ratings, and configure stereo parameters for specific games.
18069	Set up basic hot keys, and/or set up the 3D laser sight for first-person shooter games.
18070	Set up the hot keys to allow you to change various stereo parameters while playing a game.
18071	Choose a game to view its stereo value and compatibility rating.
18072	Indicates how much added entertainment value the game has when viewed in stereo.
18073	Indicates the level of comfortable stereo viewing the game has.
18074	Describes issues in the game that might interfere with good stereo.
18075	Enables a 3D laser sight for first-person shooter games. The sight appears on the center of screen with proper visual depth.
18076	Disables the 3D laser sight.
18077	Select a sight design from the internally available collection.
18078	Set laser sight transparency. 0% = solid, 100% = completely transparent.
18079	Select the resolution that you want to use for games.
18080	Select the stereo refresh rate to use when stereo is enabled and the game is played at the resolution indicated by the Resolution slide bar.
18081	Test the display capability of your system at the selected resolution, bit depth, and refresh rate.
18082	The stereo refresh rate setting will be used when a game is played at the adjusted resolution and bit depth settings.
18083	Click to revert the panel settings to the last saved settings.
18084	The set stereo refresh rate will be applied to games played at all resolutions, at this color bit depth.
18085	Select the color bit depth that you want to use for games.
18086	Name of the executable or associated file used to identify this game/demo
18087	Take the current game configurations from the configured game version, and apply them to a new game. Select the new game from the file folder window.
18088	Undo the association of the game configuration to the new game.
18089	Adjust gamma value for Stereo mode.
18090	nView is enabled and currently set to clone mode, please disable clone mode in order to run stereo.
18091	Stereo Enable Error
18092	Enable/Disable fast refresh rate switching
18094	3D laser sight for first-person shooter games. The sight appears on the center of screen with proper visual depth.
18095	Input desired hotkey for selected action.
18097	Select desired action from the list
18098	Press 'Apply' button to save your settings.
18099	Press 'Restore Defaults' button to to restore default key binding.
19000	&Brightness
19001	&Contrast
19002	&Saturation
19003	&Flicker Filter
19004	The NVIDIA System Sentinel is reporting that the NVIDIA powered graphics card is not receiving sufficient power.
19005	To protect your hardware from potential damage or causing a potential system lockup, the graphics processor has lowered its performance to a level that allows continued safe operations.
19006	The NVIDIA System Sentinel is reporting that your NVIDIA powered graphics card is operating at an elevated temperature.
19007	To protect your system from overheating and causing a potential lockup, the GPU has lowered its performance to a level that allows continued safe operations. You may notice a performance difference in some applications.
19008	The NVIDIA System Sentinel has changed the operating characteristics of your NVIDIA powered graphics card.
19009	To protect your computer from erratic functionality or a potential lockup, the GPU has lowered its performance to a level that allows continued safe operations. You may notice a performance difference in some applications.  Any number of factors may have contributed to this adjustment. The connection between your graphics card and motherboard may be unreliable, possibly due to temperature. Poorly shielded computer cases can also cause problems.
19010	%d°
19011	Performance Indicator
19012	Power Indicator
19013	Heat Indicator
19017	Page-Flipped stereo.
19018	Anaglyphic stereo (use red-blue glasses to view).
19019	Stereo Compatibility Settings
19020	If checked, AA will be forced off when Stereo is active
19021	If checked, Software Vertex Shaders  will be used when Stereo is active
19022	If checked, Hardware Transformation and Lighting will be turned off when Stereo is active
19100	Toggle Stereo Default On
19101	Save Image
19102	Increase Separation
19103	Decrease Separation
19104	Increase Gamma
19105	Decrease Gamma
19106	Toggle Stereo Default On
19107	Cycle Frustum Adjustment
19108	Increase Screen Depth
19109	Decrease Screen Depth
19110	Increase Backplane
19111	Decrease Backplane
19112	Write Configuration
19113	Delete Configuration
19114	Increase Convergence
19115	Decrease Convergence
19116	Toggle Auto Convergence
19117	Restore Default Convergence
19118	Suggest Settings
19119	Unsuggest Settings
19120	Force &anti-aliasing always off in Stereo
19121	Force software &Vertex Shaders in Stereo
19122	Force HW &TnL off (DirectX only)
19123	Restore &Defaults
19124	Note: Stereo rendering requires both front and back buffers to be duplicated in memory potentially taking up a significant amount of memory. For example, for 800x600x32 this would add ~2Mb and for 1024x768x32 it would be over 3Mb additional. You can reduce the amount of memory required by reducing either the resolution or the pixel depth.
19125	Separation
19126	Gamma
19127	Convergence
19128	Screen Depth
19129	Backplane
19130	Settings and Config
19134	DDC VGA glasses (IO Display)
19135	Direct 3-Pin DIN VESA Connect
19136	White line code glasses
19137	Blue line code glasses
19138	Vertical Interleaved (SeeReal)
19139	Horizontal Interleaved (VREX)
19140	Vertical Interleaved
19141	Horizontal Interleaved
19142	Anaglyph (Red/Blue Glasses)
19143	Sharp 3D Display
19144	Dual VGA Output (Dep3D)
20000	Desktop Manager
20001	Application Management
20002	Hot Keys
20003	Global Settings
20004	Executable files (*.exe)
20005	Zoom
20006	Pop-Ups
20032	<current desktop>
20033	its current screen
20034	the entire desktop
22000	Are you sure you want to clear all application management settings?
22001	Are you sure you wish to reset all global Desktop Manager settings and hot keys?
22002	Two or more of the hot keys you have specified are the same and will not function correctly.\n\nPlease resolve the problem by changing or disabling the appropriate hot keys.
22003	The desktop name you entered is not valid:\n\nThe backslash ('\') character is not permitted.
24000	&Desktop Manager\n&Maximize to current display\n&Send to other display\nMa&ximizes to single display\nStarts at &last-used position\nProgram starts on &display\nProgram starts on des&ktop\n(&default)\n(&current desktop)\n&New...\n&1\n&2\n&3\n&4\n(&default desktop)\n(Desktop)
25000	Allow applications to control the antialiasing mode
25001	Manually select the antialiasing mode
25002	Off (no antialiasing)
25003	2x
25004	Quincunx Antialiasing(tm)
25005	4x
25006	4x, 9-tap Gaussian
25007	4xS (Direct3D only)
25008	Use these sliders to select the degree of antialiasing to be used in Direct3D and OpenGL applications. 
25009	Texture Sharpening
25010	Save the current settings as
25011	OK
25012	Cancel
25013	Screen positioning
25014	Up
25015	Left
25016	Right
25017	Down
25018	&Reset
25019	&Contrast
25020	&Saturation
25021	Off
25022	&Flicker filter:
25023	Note: Various settings have been disabled because protected content is being displayed. 
25025	Additional &Properties...
25026	NVIDIA on the &Internet >>
25027	Processor:
25028	%s
25029	Bus:
25030	BIOS:
25031	Memory:
25032	IRQ:
25033	TV Type:
25034	System Information
25035	System Processor:
25036	CPU
25037	Total Physical Memory:
25038	%s KB
25039	Free Physical Memory:
25040	%s KB
25041	DirectX Version:
25042	Unknown version of DirectX installed
25043	Driver Version Information
25044	Graph
25045	&Digital Vibrance:
25046	Medium
25047	Active Clou&r Channel:
25048	&Brightness
25049	&Contrast
25050	&Gamma:
25051	1.00
25052	Custo&m Colour Settings:
25053	&Save As...
25054	&Delete 
25055	&Apply settings to all rotation angles
25056	Restore &Hardware Defaults
25057	Centering
25058	Click the icons on the desktop image to adjust the screen to the desired position. 
25059	Note:\nOn certain monitors, the screen may go blank momentarily during adjustment.
25060	Default
25061	Digital Flat Panel Options
25062	These options allow you to determine how lower resolutions are displayed on your flat panel.
25063	Use &Display Adapter Scaling
25064	Use &Centered Output
25065	Use &Monitor Scaling
25066	Your flat panel display has a maximum resolution of ...
25067	&Regional Settings
25068	The proper TV format is based on your locale. Select your locale from the list below.
25069	&Make this format the power-up default
25070	Select the output device on which to display Windows:
25071	A&nalogue Display
25072	&Digital Display
25073	&TV
25074	Format:
25075	Change &format...
25076	Video &Output Format:
25077	Device Adj&ustments...
25078	0
25079	0
25080	0
25081	&Check here if you have a TV connected but it remains unselectable.
25082	&Performance and Compatibility Options
25083	Texture Anisotropic Setting :
25084	0
25085	x
25086	Mipmap Detail &Level:
25087	PCI Texture Memory Size
25088	&Use up to
25089	MB of system memory for textures in PCI mode.
25090	&Custom Direct3D settings:
25091	More Direct&3D...
25092	&Texel Alignment
25093	This slider lets you position the texel origin between the upper-left corner and the center of the texel. 
25094	Value:
25095	7
25096	Upper-Left Corner
25097	Center
25098	Vertical Sync
25099	Vertical Sync &Mode:
25100	Render &no more than
25101	frame(s) ahead.
25102	&Performance and Compatibility Options
25103	Default &Colour Depth (for textures):
25104	&Buffer-Flipping Mode:
25105	&Vertical Sync:
25106	Anisotropic &Filtering:
25107	&Use up to
25108	MB of system memory for textures in PCI mode.
25109	Custo&m OpenGL Applications Setting:
25110	Enable &Overlay in OpenGL
25111	Enable &Stereo in OpenGL
25112	Stereo Display &Mode:
25113	S&wap eyes (L becomes R, R becomes L)
25114	Current AGP Settings
25115	Mainboard Chipset:
25116	Intel 440BX
25117	AGP Rate:
25118	PCI Mode
25119	Aperture Size:
25120	256 MB
25121	Side-Band Addressing:
25122	Enabled/Disabled
25123	&Manually select your AGP rate
25124	Note: Selecting the highest AGP rate ensures only that the highest rate supported by your mainboard chipset will be used.
25125	AGP &Rate
25126	PCI Mode
25127	Depth of Request &Queue
25128	Auto-Select
25129	Specify:
25130	Enable AGP &Fast Writes
25131	Enable &Write Combining
25132	Enable &2D Command Buffer Caching
25133	The display mode setting has exceeded the capabilities of the graphics hardware.\n\nPlease select a lower resolution, colour depth, or refresh rate for one of your displays. Click OK to continue.
25134	&Don't show me this message again
25135	&Details...
25136	The changes made to the Display Properties require that the system be restarted for the new settings to take effect.
25137	Before restarting, save any open documents and close all applications.
25138	I &will restart my computer later
25139	Note: Increasing the hardware clock frequencies beyond the manufacturer's recommended settings may cause system instability and possibly damage the hardware.\nUse caution when adjusting these settings.
25140	Allo&w clock frequency adjustments
25141	&Core Clock Frequency:
25142	&Memory Clock Frequency:
25143	&Test Settings
25144	A&utomatically apply these settings at startup
25145	Restart Now
25146	To ensure the proper operation of the clock frequency controls, your graphics hardware configuration must be examined before any adjustments can be made. This requires restarting your computer. 
25147	Before continuing, save any open documents and close all applications. If you are using a third-party overclocking utility, disable it before restarting.
25148	Click 'Restart Now' to continue, or click 'Cancel' to return without restarting.
25149	After Windows has been restarted, return to the Clock Frequencies page to make the desired adjustments to the core and memory clock frequencies.
25150	Please wait...
25151	You have chosen to automatically set a clock speed at startup which varies from the hardware manufacturer's default settings.
25152	If these settings prevent Windows from starting properly or cause the system to become unstable, you can bypass the automatic clock setting and force the default hardware values by pressing and holding the CTRL key during startup.
25153	Note: To bypass the automatic clock setting on a computer connected to a network, hold down the CTRL key immediately after logging on to Windows.
25154	&Don't show this message again
25155	nView allows you to connect separate displays to a single graphics card.
25156	nView Modes
25157	&Standard (nView disabled)
25158	&Clone
25159	&Horizontal Span
25160	&Vertical Span
25161	&Display:
25162	&Make this the primary display
25163	Chip Type Text
25164	Detect Dis&plays
25165	D&evice Settings >>
25166	&Force detection of a monitor on the secondary connector
25167	Disable a&uto-panning on secondary device (viewport lock)
25168	Enable e&xtended desktop mode. (Requires reboot)
25169	Monitor Type
25170	Default Monitor
25171	Monitor Settings
25172	&Refresh Frequency:
25173	&Hide modes that this monitor cannot display
25174	Unchecking this box allows you to set your display to modes that this monitor cannot display correctly. This may lead to an unusable display and/or damaged hardware.
25175	&Yes
25176	&No
25177	Your desktop has been reconfigured. Do you want to keep these settings?
25178	Reverting in 15 seconds.
25179	You have selected a non-optimal Screen Resolution setting for your LCD display panel. Selecting this resolution may result in fuzzy text and pictures.
25180	Unlike external computer monitors, LCD display panels have one particular Screen Resolution setting that looks best. It is recommended you set your Screen Resolution to %ux%u.
25181	The Control Panel has applied changes to which other pages on the property sheet may be sensitive. To ensure proper operation, the Display Settings property sheet will now be closed.  
25182	Click OK to have the setting modified, or click Cancel to return with your original settings restored.
25183	Note that this change is required in order for the mode that you have selected to work correctly, and can be done automatically by following the instructions below.
25184	&Screen Resolution:
25185	res
25186	&Refresh Rate:
25187	&Apply
25188	&Display the NVIDIA Settings icon in the taskbar
25189	Select taskbar &icon:
25190	The Desktop Manager provides enhanced nView multi-display functionality and helps you organize your applications for use with multiple displays and desktops.
25192	&Enable Desktop Manager
25193	Desktop Manager &Configuration...
25194	Enable Dualview (Treat multiple outputs on an NVIDIA GPU-based card as separate display devices).
25195	&Timing Modes
25196	Select the proper timing mode for your display:
25197	Auto-Detect (Windows determines the proper mode.)
25198	General Timing Formula (GTF)
25199	Discrete Monitor Timings (DMT)
25201	&Brightness:
25202	100%
25203	&Contrast:
25204	100%
25205	&Hue:
25206	0°
25207	&Saturation:
25208	100%
25209	Enable Video &Overlay Zoom
25210	Select screen region to zoom
25211	Top-Left
25212	Top-Right
25213	Center
25214	Bottom-Left
25215	Bottom-Right
25216	&Zoom Control
25217	Out
25218	In
25219	&Check here if you are having problems with your TV tuner
25220	&Video Mirror Settings...
25221	Full-Screen Device
25222	Disable
25223	Primary display
25224	Secondary display
25225	Auto-Select
25226	Aspect &Ratio
25227	Track Overlay Aspect
25228	Source Aspect
25229	Full-Screen
25230	TV 4:3
25231	Anamorphic 16:9
25232	Enable Video &Mirror zoom
25233	&Track overlay zoom.
25234	Allo&w driver to select the full-screen mode
25235	Tr&ack overlay rotation
25236	Use these sliders to adjust your PowerMizer settings
25237	Maximum Power Savings
25238	Maximum Performance
25239	Frame Buffer Settings
25240	Frame Buffer &Mode:
25241	Frame Buffer Size:
25242	8 MB
25243	Frame Buffer Management Strategy:
25244	Conservative
25245	Aggressive
25246	&Enable rotation support
25247	Landscape (0 degree rotation)
25248	Portrait (90 degree rotation)
25249	Inverted Landscape (180 degree rotation)
25250	Inverted Portrait (270 degree rotation)
25251	<-
25252	->
25253	Mouse Buttons
25254	Display the NVIDIA Settings menu when clicking...
25255	The &primary mouse button
25256	The &secondary mouse button
25257	&Either the primary or the secondary button
25258	Confirmation
25259	By default, NVIDIA Settings displays a confirmation message when a custom 3D setting is applied.
25260	&Do not display confirmation messages.
25261	3D Menus
25262	Display &menus with a 3D appearance.
25263	Copyright (c) 1998-2003 NVIDIA Corporation
25264	Total Physical Memory Available:
25265	Free Physical Memory:
25266	NVIDIA Taskbar Utility
25267	Windows needs to be restarted before the Desktop Manager can be launched. A restart is required only the first time that Desktop Manager is lauched after the software is installed. 
25268	Before continuing, save any open documents and close all applications. 
25269	Click 'Restart Now' to continue, or click 'Cancel' to return without restarting.
25270	The Control Panel must change the state of the 'Hide modes that this monitor cannot display' setting on the Monitor page of this display adapter.
25271	&Restore Defaults
25272	The 'NVIDIA Settings' taskbar utility lets you conveniently access various features and presets you've configured in the Display Properties directly from the Windows taskbar.
25273	Desktop Colour Options
25274	Enable TV Viewing and Video Capture
25275	Restore non-Personal Cinema Setting
25276	Video Viewing Preference
25277	On TV
25278	On CRT
25279	Screen Size
25280	Aspect Ratio
25281	Full-Screen Video Mirroring Options
25282	The Personal Cinema device is not attached. Click OK to enable your Personal Cinema device and to switch your Primary display setting.
25283	Frame Buffer Location:
25284	For fastest start-up time
25285	For fastest graphics performance
25286	You must restart your computer before the new settings will take effect.
25290	Capabilities
25291	NVIDIA GPU :
25292	Actual :
25293	AGP &Rate
25294	&Fast Writes
25295	&Sideband Addressing
25296	Enable &2D Command Buffer Caching
25297	&Depth of Request Queue
25298	Auto-Select
25299	Specify:
25300	&Test Configuration
25301	SBA
25302	FW
25303	AGP Disabled
25304	AGP %dX
25305	AGP %d.%d
25306	%s chipset :
25307	Max request queue depth: %d
25308	disabled
25309	Intel
25310	VIA
25311	AMD
25312	RCC
25313	Micron
25314	NVIDIA
25315	Unknown
25316	VESA BIOS Information
25317	Vendor:
25318	Product:
25319	Version:
25320	System Memory
25321	Available Physical Memory:
25322	Available Virtual Memory:
25323	Default
25324	Maximum Performance
25325	&Apply to desktop
25326	&Save As...
25327	&Delete
25328	&Restore Defaults
25331	Balanced
25333	&Texture Quality
25334	Low
25335	Default
25336	High
25337	&Antialiasing
25338	Off
25339	2x
25340	Quincunx
25341	4x
25342	4x,9-tap Gaussian
25343	A&nisotropic Filtering
25344	Off
25345	1x
25346	2x
25347	4x
25348	8x
25349	AGP Settings
25350	Additional Information
25351	Performance & Quality Settings
25352	System Performance
25353	Multi-Display &Hardware Acceleration:
25355	Refresh Rate Overrides
25356	Applications &control refresh rate
25357	&Override refresh rates
25370	Temperature Settings
25371	GPU Core Temperature:
25372	Core Slowdown Threshold
25373	&Degrees:
25374	Ambient Temperature:
25375	Scale
25376	&Fahrenheit
25377	&Celsius
25378	Enable Heat Indicator &warning when threshold exceeded
25379	Display Core Temperature in system &tray area
25380	&Log Settings
25381	Temperature Level
25390	Force Fan On
25391	Apply these settings at &startup.
25392	Adapter Information
25401	Balanced
25402	Current Power Source:
25403	Current Power Level:
25404	Current Battery Charge
25407	Battery
25408	AC Outlet
25409	Maximum Power Savings
25410	Maximum Performance
25420	Image Sharpening
25423	PowerMizer setting only affects 3D performance when running on battery.
25424	The gamma ramp has been changed outside the control panel. Any modification here will erase those changes.
25425	Stereo
25426	Overlay
25427	Exported Pixel &Types:
25430	Force High Res. Z-Buffer
25431	Prune texture format list
25432	Reduce Pixel and Vertex Shader support
25433	Prune mode list
25434	Flush after blit
25435	Enforce blit wait flag
25436	Prune OGL extension string
25437	Legacy OGL support
25438	Troubleshooting
25439	Send troubleshooting report to NVIDIA.
25450	About NVIDIA Settings...
25451	Exit
25460	Single-Display Mode
25461	Multi-Device Compatibility Mode
25462	Compatibility (GCD Architecture)
25463	Multi-Device Performance Mode
25464	Performance (GCD Architecture)
25465	nView Clone/Span Mode
25500	Custom Resolutions
25501	Add
25502	&Modify
25503	&Test
25504	&Remove
25505	Allow &Panning
25506	&X
25507	&Y
25508	&Frequency
25509	&Depth
25510	Standard Modes:
25511	Custom Modes:
25512	Device Modes:
25513	Custom Resolutions && Virtual Screens
25520	Custom Resolutions
25521	Ignore &Colour
25522	Ignore &Refresh
25523	&Screen resolution
25524	Less
25525	More
25526	%u by %u pixels
25527	C&olour quality
25528	Highest (32 bit)
25529	Medium (16 bit)
25530	Lowest (8 bit)
25531	Custom Resolutions
25532	Custom Resolutions and Refresh Rates
25533	Last attempted mode:
25534	Auto-Correct
25535	Change Resolutions
25550	Optimize TV for Fullscreen Video
25551	Fullscreen Video Options
25552	Full-Screen Video
25560	Fixed Aspect Ratio Timing
25600	ClearView allows you to enable multiple displays. Select a particular device combination and select the preferred display that is most in use.
25601	ClearView Modes
25602	&Display Configuration
25603	Preferred Display follows mouse
25604	&Preferred Display
25605	Preferred Display &Refresh
25606	1x
25607	2x
25608	3x
25609	ClearView
25620	HDTV 480p
25621	HDTV 720p
25622	HDTV 1080i
25623	Component YPrPb
25630	&Test new settings
25631	Auto-&Detect
25632	&Optimize Clock
25633	Auto-&Clocking
25634	Set&tings
25635	Standard (2D)
25636	Performance (3D)
25637	Disable Hardware Overlay
25638	Use Fixed Aspect Ratio Scaling
25640	&Set pan-scan resolution
25641	&Monitor native support
25642	&Override application
25650	System Performance
25651	Antialiasing Settings
25652	Anisotropic Filtering
25653	Application
25654	Balanced
25655	Aggressive
25656	Override Application Settings
25660	&Image Settings
25661	Application
25662	Quality
25663	Performance
25671	Mode:
25672	Display Pair:
25673	Single Display
25674	Clone
25675	Horizontal Span
25676	Vertical Span
25677	The test failed to run at the selected clock frequencies.  Please lower your settings and try again.
25678	An error has occurred in running clock frequency test.  Your computer needs to be restarted.
25679	Enable &doublescan for lower resolution modes
25680	%u GHz
25681	VMR 7 support
25682	Timestamp
25683	Event ID
25684	Event
25685	Treat this system as &Server
25686	&Leading edge
25687	Re&fresh rate (Hz):
25688	&Falling edge
25689	Sync &delay (us):
25690	Frame synchronization options
25691	House Sync
25692	Incoming rate (Hz):
25693	&Outgoing sync interval:
25694	Sync and connection status
25695	Sync ready
25697	Timing
25698	Stereo sync
25699	In
25700	Out
25701	House Sync
25702	&Test Link
25703	Frame Synchronization
25704	Framelock Board Connection Problem
25705	Either an Ethernet LAN cable is connected to the framelock board or the linked PC is not turned on.  Either disconnect the Ethernet LAN cable or turn on the linked PC for proper operation.
25707	None
25708	TTL
25709	NTSC/PAL
25710	HDTV
25711	Treat this system as &Client
25712	Frame Synchronization refresh rate mismatch
25713	The Frame Synchronization device is requesting a refresh rate of %d Hz.  The nearest available refresh rate supported by the active graphics card and display combination is %d Hz.
25800	To remedy the problem, ensure that your NVIDIA graphics card in your system has the supplemental power connector attached.  This connection is required and your system may be damaged if it is not in place. Please refer to your owner's manual for complete inspection instructions.  Also, the power supply in your computer must be able to supply ample power to power all of the attached peripherals in addition to this extra connection.
25801	To remedy the problem, ensure that the NVIDIA graphics card in your system has ample space between it and other add-in cards in your system. Improper ventilation in you computers housing can contribute substantially to the system's overall temperature, causing various temperature-sensitive subsystems to function erratically or even fail.
25802	To remedy the problem, ensure that all parts of the system are properly ventilated, and the power supply has ample power to supply all connected equipment.  Also, various motherboard BIOS settings may need adjustment for proper operation of the graphics card interface.
25810	Problem Report
25811	&Troubleshoot
25820	Troubleshooting
25830	Fullscreen Video
25831	DualView
25832	Hide modes that this monitor cannot support
25833	Display custom modes only
25834	&Identify
25835	None
25836	Current Display
25838	HiRes Desktop Scaling
25839	from %d x %d to %d x %d
25840	Load the current settings from
25841	Load Settings
25842	&VMR 7 Support
25843	Fullscreen Video Options
25844	Projected Blending Apply
25845	Projected Blending may take several seconds to start because the nView services are currently disabled and will need to be automatically restarted in order to enable Projected Blending.
25846	A session of NVIDIA Control Settings is already running!
25847	NVIDIA Control Settings
25848	Unable to create critical resource
25849	Use Centered Output
25850	Optimize for DVD
25851	Optimize for desktop
25852	Custom (Default)
25853	Optimize TV
25854	Presets
25855	Saturation
25856	Brightness
25857	Contrast
25858	Flicker Filter
25859	Click 'Override refresh rates' to select refresh rate overrides to be used in applications.
25860	Default
25861	Hertz
25862	&Initialize Link
25863	Chrontel 7000 Family
25864	Philips 7100 Family
25865	NVIDIA Integrated
25866	Integrated (MV)
25867	Integrated
25868	Cyrix 6x86 family
25869	Cyrix MII family
25870	Overdrive
25871	Overscan shift
25900	Desktop Overlap and Edge Blending
25901	Enable &Desktop Overlap
25902	Overlapped Size Horizontal
25903	Overlapped Size Vertical
25904	pixels
25905	Enable Projected &Blending
25906	&Horizontal
25907	&Vertical
25908	Horizontal Roll Off
25909	Vertical Roll Off
25910	Horizontal Luma
25911	Vertical Luma
25912	E&xport Profile
25913	&Import Profile
25914	Export Profile
25915	Import Profile
26010	&In the future, do not show this message.
26011	You have chosen to override application controls for anisotropic filtering.\n\nOverriding this setting is intended ONLY for applications that do not expose anisotropic settings.\n
26012	You have chosen to override application controls for antialiasing.\n\nOverriding this setting is intended ONLY for applications that do not expose antialiasing settings.\n
26013	Application-Controlled
26014	Off
26015	2x
26016	4x
26017	8x
26018	4xG
26019	2xQ
26020	4x9T
26021	4xS
26022	6x
26023	16x
26024	High Performance
26025	Performance
26026	Quality
26030	Hz
26031	&Properties...
26032	Enter Custom Resolution values here.  To enter a refresh rate that does not appear in the list, you may type it in.
26033	The Custom Resolution property shows all available display settings for the selected resolution.
26034	&Only show custom modes
26035	Custom Resolution Settings
26036	Screen Refresh Rate:
26037	Width:
26038	Height:
26039	All available
26040	Standard Refresh Rates
26041	The Custom Resolution input is invalid.
26042	The Custom Resolution has been added. successfully.
26043	The Custom Resolution cannot be added.
26044	The Custom Resolution has been removed. successfully.
26045	The Custom Resolution cannot be removed.
26046	%d Hertz
26047	%d bit
26048	Colour Quality:
26049	Monitor Settings
26050	My connected TV does not appear in this list.
26051	Signal format:
26052	Connection:
26053	Select the output device on which to display Windows:
26054	Changing to this HDTV format may cause the Windows Start button to appear outside of the visible desktop. Overscan Shift will track the mouse cursor and move the visible desktop as you move the mouse cursor.\n\nDo you want to use the Overscan Shift feature?
26055	Changing to this HDTV format may cause the Windows Start button to appear outside of the visible desktop. Underscan will scale down the Windows desktop, allowing you to see the full desktop.\n\nDo you want to use the Underscan feature?\n\nNOTE: Enabling Underscan will change (reduce) your Windows screen resolution to %dx%d.
26056	HDTV Overscan Configuration
26057	Use Underscan to show the entire Windows Desktop.
26058	Use Overscan Shift to show the entire Windows Desktop as you move your mouse cursor.
26059	Keep the native HDTV resolution
26060	Changing to this HDTV format may cause the Windows Start button to appear off-screen.
26061	Your attempt to change current nView display mode\nsettings failed - Error Code %d
26062	Coordinated Video Timings (CVT) Standard
26063	Remember my preference for the selected format
26064	Enabling Underscan will reduce your Windows screen resolution from %dx%d to %dx%d.
26065	The choice you have selected will reduce your screen resolution from %dx%d to %dx%d.  Do you want to fine-tune this resolution?
26066	Always use this setting
26067	Capability
26068	GPU
26069	Chipset
26070	OS
26071	Optimal
26072	AGP Version
26073	Max AGP Rate
26074	Max Request Queue Depth
26075	Fast Writes
26076	Sideband Addressing
26077	Yes
26078	No
26079	Other Settings
26080	Your optimal AGP configuration is determined by the capabilities of your operating system, GPU, and motherboard chipset.\n\nYou can choose to override the optimal configuration settings below.
26081	The test failed to run with the selected configuration. Your AGP configuration was reset to the default.
26082	The test passed with the selected configuration.\n To apply your AGP settings, click Apply
26083	Screen Menus
26084	Remove infrequently used screens by dragging them from the NVIDIA screen menu to the list below.  Restore screens to the menu by dragging them individually, or click Restore Defaults.
26085	To begin, check the 'Enable Screen Menu Editing' check box. To return to normal navigation mode, uncheck the check box.
26086	E&nable Screen Menu Editing
26087	(No screens have been removed from the screen menu.)
26088	\nAccelerated Graphics Port (AGP) configuration problem was encountered.
26089	\nTo protect your system from data loss and potential lockup, Accelerated Graphics Port (AGP) configuration was set to the default. You may notice a performance difference in some applications.
26090	AGP Indicator
26091	AGP Settings...
26093	Enable &performance graph
26094	Adapter default
26095	Optimal
26096	A&pply colour changes to:
26097	All
26098	Desktop
26099	Overlay/VMR
26100	Fullscreen Video
26101	Colour P&rofile:
26103	Standard Mode
26104	Advanced Mode
26106	Custom - 
26107	ICC - 
26108	Application-Controlled
26109	&Import...
26110	Add...
26114	A&djust Colours...
26115	Import Device Ramps
26116	Load colour correction curves from ICC profile filename:
26117	ICC Colour Correction Profiles (*.icm;*.icc)|*.icm;*.icc|All Files (*.*)|*.*||
26118	This will discard the colour correction settings you specified using the previous method.  Continue?
26119	&Do not prompt me again
26120	&Undo
26121	&Redo
26122	Cu&t
26123	&Copy
26124	&Paste
26125	&Delete
26126	Select A&ll
26127	What's this?
26130	&Insert Point
26131	&Delete Point
26132	&Delete Points
26133	Cha&nnel
26134	RGB
26135	&Red
26136	&Green
26137	&Blue
26138	Grid Si&ze
26139	Show only physical panning resolutions
26140	Physical resolution
26141	Frame queue limit
26142	Not available
26150	Install Dualview (Advanced)
26151	The Windows 2000 Dualview device will now\nbe installed. You must restart your computer.\nPlease close all open applications and click\n OK to continue.
26152	Please select your application here :
26154	&Video mode
26155	In&terlace mode
26156	Auto
26157	Auto (%.2f)
26158	House sync
26165	Maximum system memory for PCI mode textures:
26166	MB
26167	&Display Adapter Scaling
26168	&Centered Output
26169	&Monitor Scaling
26170	&Fixed Aspect Ratio Scaling
26171	To conserve battery power, SmartDimmer allows you to control the brightness of your display while it is active or idle.
26172	Enable SmartDimmer (while using battery only)
26173	Brightness while active:
26174	Min
26175	Max
26176	Brightness while idle:
26177	Current brightness
26178	SmartDimmer
26179	An attempt to detect your connected displays has been made. If you do not observe positive results, you are advised to restart you system. If you continue to observe a problem, please contact Customer Support for further assistance
26180	Overlay zoom controls
26181	Overlay colour controls
26182	Full screen video zoom controls
26183	Full screen video controls
26184	Screen Adjustment
26185	TV Settings
27174	Fullscreen Video
27328	The test failed to run with the selected configuration. Your AGP configuration was reset to the previous value.
28500	3D Antialiasing Settings
28501	3D Antialiasing Settings
28502	Save Settings
28503	TV Output
28504	Info
28505	Colour Correction
28506	Screen Adjustment
28507	Flat Panel Display
28508	Confirm Desktop Setting
28509	Change TV Format
28510	Device Selection
28511	Device Selection
28512	Direct3D Settings
28513	More Direct3D
28514	OpenGL Settings
28515	OpenGL Settings
28516	OpenGL Stereo
28517	Hardware Options
28518	Restart Required
28519	PowerMizer
28520	NVidia nForce
28521	OpenGL Settings Conflict
28522	Clock Frequencies
28523	Restart Required
28524	Testing new settings
28525	Hardware Options
28526	nView
28527	nView
28528	Monitor Settings
28529	Confirm Display Settings
28530	Control Panel Exit Required...
28531	Panning Control
28532	System settings change
28533	Device Configuration
28534	Desktop Utilities
28535	Display Timing
28536	Overlay Colour Control
28537	Overlay Controls
28538	Full Screen Video Mirror Control
28539	Options
28540	About Taskbar Utility
28541	Restart Required
28542	New Application
28543	Desktop Manager
28544	Stereo Properties
28545	Additional Stereo Properties
28546	Stereo Test Configuration
28547	Game Configuration Hot Keys
28548	Game Configuration
28549	Help
28550	Advanced Game Configuration
28551	Advanced Game Configuration