ADI Corporation		         	  ADI updated driver for Windows 95  V. 3.0



				Readme First !


ADI update driver for Windows 95
This document contains release information for the ADI monitor users to update
driver onto Windows 95. The ADI Updating File is free to any ADI monitor user
and may be freely distributed. Updates to the tools will be available through
the standard ADI distribution mechanisms(technical support databases, development
partner, etc.). Updates are also available on the ADI World Wide Web site 
(WWW.ADI.com.tw).

New series of ADI monitors
The following contains installation procedure for updating ADI monitor series
of ADI
DMC-2304
ProVista 14,
Provista E30
Provista E40
MicroScan 3V,
MicroScan 5V,
MicroScan 5V+,
MicroScan 4P/4P+,
MicroScan 5P/5P+,
MicroScan 6P,
MicroScan 4G,
MicroScan 5G,
MicroScan 6G, 
MicroScan 17,
MicroScan 17X,
MicroScan 17X+, and
ADI Duo

To the old monitor users
For belowwith monitor users can continue to use old driver on Windows 95 and
therefore there is no need to use this new driver.

ADI MicroScan 2E
ADI MicroScan 3E
ADI MicroScan 3E+
ADI MicroScan 4A
ADI MicroScan 4GP
ADI MicroScan 4V
ADI MicroScan 5AP
ADI MicroScan 5EP


Installation Procedure:

1. Starting windows 95
 
2. Open <Control Panel> under <My Computer>, click on the <Display> icon. 
   You will see a window titled "DISPLAY PROPERTIES", click SETTINGS. The
   settings allow changes of the monitor setup, including model names, 
   resolutions and colors.
 
3. Afterward, a window titled "CHANGE DISPLAY TYPE" will be appeared under 
   the monitor type.
 
4. Click "Change" and select source drive to be installed from "SELECT DRIVE".
   For example, If you are using a 3.5" diskette drive for installation, chose
   "A" drive accordingly. The default monitor will appeared under Models.
 
5. Click on 'Have Disk'.  A window "INSTALL FROM DISK" will appear and request to 
   insert disk with our driver "ADI95V01.INF". Install the driver accordingly.
 
6. After coping the driver to the hard disk, click ok return to "SELECT DRIVE".

7. Click Show all devices, then all the manufacturers and models will be appeared. 

8. Select ADI and ADI models accordingly.  Click ok to leave windows. Please
   note that the selected model will now appear under Monitor Type in the
   sub-windows "CHANGE DISPLAY TYPE".
 
9. Now you can chose your updated ADI monitor model from the list then restarted
   it for effecting the driver.



April 1997