Getting started

Welcome to the LogoManager getting started guide!

Once you have installed LogoManager on your machine, the first thing you will need to do is to get the software connected to the phone.  For this you will need either a cable or a suitably configured infrared port.

• If you are using a cable, connect it to a free 9 pin serial port, then enter the LogoManager configuration dialog to specify the port you have selected and cable type.  The installation tool can also be used to automatically detect the best configuration for your cable.
• If you are using a more recent handset via infrared (IrDA), then it is likely that you already have the needed IrDA drivers installed for your infrared port.  Simply select 'IrDA (Use drivers)' in the configuration dialog.
• If you have an older infrared-enabled phone such as the 6110, you will need to refer to the help information on DirectIR before proceeding.

Once you have configured the port, you should get the 'Connected' message in the LogoManager status bar.  If not, then please refer to the connection troubleshooter for further help.  There is also a list of frequently asked questions.

Next Page

What do you want to know more about?

Cables
Infrared
Connection troubleshooter
Frequently asked questions