Note: To install close all programs
then use Run Setup.exe

For the latest version check my web site at 

http://members.aol.com/andrewc119/index.htm
 
Requires Windows 95 or NT


What Is Gcode, The Product?.

Gcode is specifically designed for converting AutoCAD
drawings into G-Code files for use with any 2-D or 3-D.
Machine such as Wire EDMs,  Laser Etchers, Flame cutting,
Milling machines, Lathes etc..

GCode can be used for creating individual complicated tool
paths for 2-D and 3-D machines. Custom INI files are used
to taylor Gcode to your particular machine tool.
Several working examples are provided.
Gcode is a low cost opportunity for small independent
machine shops to convert their drawings into useful
programs for their CNC and DNC equipment
without the hassle of figuring out the geometry manually.	

Simply draw the outline of the part on a dedicated layer.

Then DXF out the file to a directory that Gcode is watching.

Gcode will capture the file, process, and plot it.

A full function editor is provided up to one million line capacity
to fine tune the file adding tool offsets etc.

Numerous other options such as flipping the part, 
and scaling are provided.
'Swap' allows the direction of travel to be changed.

File transfer both in an out is supported so this system
can be hard wired to a machine tool via Rs232.

Graph line color red = cutting to blue not cutting.

Files can be saved and retrieved across a network.

Standard ascii format is used for all files.

Can be configured to support any axis combination.

The characters assosiated with a command 
can be changed at will.

Start by selecting File, Open, Samples. Exp.dxf

To quickly see a demo.

Produced with Borland Delphi2.

Please register your shareware.

A R Clayton.
865 Fox Hollow Ln.
Salisbury NC.
28144-1808

Fee $100.00 after 30 days use.



Questions ? Email andrewc119@aol.com

Fax 704 630 9544

Thankyou for trying Gcode.

Other Shareware used with Gcode 

Helpgen 1.2 By Rimrock Software

Autocad is a registered trademark of Autodesk Inc

Windows95 is a registered trademark of Microsoft Corp inc.