I. Lexmark 1100 Color Jetprinter Series Printer Driver for Microsoft Windows 3.1, 3.11, Windows 95, and Windows 98. II. VERSION HISTORY 2.1.3.2 This driver is for the Lexmark 1000 or 1100 Printer. III. CONTENTS: Filename Description ----------- ------------------ CJ3932LE.EXE Compressed driver files. (You may want to minimize this screen so that you can refer back to it during the driver installation) IV. Creating Installation Diskettes !!! If you don't want to create installation diskettes, skip to section VI to install directly on the PC !!! 1. You must have 2 Formatted diskettes to create the drivers. 2. The Disk Create Program will copy the driver files to Drive A. 3. From the download directory, locate the MakeDisk.Bat program and execute it to begin the creation of the driver diskettes. 4. Once the diskettes are created, continue with the installation instructions in step VI. You will be able to start the install from disk 1. VI. INSTALLATION INSTRUCTIONS Windows 3.1x: 1. From the "File" menu, choose "Run". 2. Type the path where you extracted the driver files (ex. c:\Lxk1100) followed by "setup.exe". 3. Press . Windows 95/98: 1. From the START menu, choose "Settings" and then "Printers". 2. Double Click on "Add Printer" in the Printers folder. 3. When you are prompted to select the printer driver, click on "Have Disk" and enter the location where the driver files were extracted (ex. C:\Lxk1100). 4. Select your printer, and continue with the installation. Click on the Readme icon in the Lexmark 1100 Series group for more information on your printer. VII. DRIVER SUPPORT: Lexmark provides technical support for this printer driver. Call the Lexmark Technical Support Center at 1-800-LEXMARK or contact Technical Support via the Internet at: http://www.lexmark.com/ SPECIAL NOTICE -- The following terms are trademarks or registered trademarks of companies as follows: Lexmark Lexmark International, Inc. Windows Microsoft Corporation Microsoft Microsoft Corporation