README.TXT for Windows NT 4.0 driver version 1.0 for
AIWA GD-8000 tape drive
---------------------------------------------------------
The following steps will install AIWADAT.SYS on an NT 4.0
system.
 
1. Cable the tape drive to the system.

2. Start Windows NT.

3. Put the driver diskette in drive A:.

4. From the 'Start Menu', choose 'Settings', then
   choose 'Control Panel'.

5. Double-click 'Tape Devices'; the 'Tape Devices' window
   appears and automatically loads the driver list.
   Click 'Have Disk'.

6. The 'Install from Disk' window appears. Ensure that the
   source directory is A:\.

7. Click OK.

8. The 'Install Driver' window appears. In the 'Tape Devices'
   list, 'AIWA Tape Driver for GD-8000' is highlighted.
   Click OK.

9. The 'New Tape Device Found' window appears.

10. Click OK to install driver now.
 
11. The 'Tape Devices' window appears. It shows 
    'AIWA GD-8000   (Driver loaded)'. Under the Drivers Tab,
    it shows 'AIWA Tape Driver for GD-8000    (Started)'.
    Click OK to close the window.

12. Close Control Panel.

13. Remove the diskette from drive A:.

14. Restart Windows NT.

15. From the Start menu, Choose 'Settings', then choose 'Control Panel'.
    Double-click 'Devices' and confirm that the AIWADAT
    device started.