BIOS-Update for HOT-541
=======================

Attention!
This file may not be up do date.
We are not liable for any damages caused by the bios-update.

Execute flash-programming without any memory manager. Disable for example
the EMM386.EXE in CONFIG.SYS. Disable any password settings in
Bios-Setup!

Start program by entering:    FLASH541 <Bios-Filename>

!!!!!!!!!!!---IMPORTANT--------!!!!!!!!!!!!!!!!!!!!!
If the flash tool reports an intel-flash-module, only use the 541wuq10,
do not use the 541wuq13 !!!! Use 541wuq13 only if the flash-tool reports
a MX-module !!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 


After programming then switch off the system and start again.

Info:
=====
since version 0A "Cyrix 6x86"-CPU is supported
since version 0B  "AMD K5"-CPU is supported
since version 0D IRDA configuration categories on BIOS setup is provided
since version 0D PnP is provided.
Make bios update with any ISA-VGA-Card, if old Bios-Version makes trouble with PnP.