ALi ATAPI Bus Master Device Driver for Windows 95 v2.8 (57KB)

-------------------------------------------------------------------------
         How to install drivers ?
-------------------------------------------------------------------------
 One of the two methods listed below can be used to install driver:

  I. Use INSTALL.BAT under Windows 95 environment.

  OR

 II. Use the following sequence step by step:

  . Popup 'Control Panel' and open 'Add New Hardware'.

  . Choice 'Next'.

  . Switch to 'No' - don't let Windows to search for your new hardware, and 
    click 'Next'.

  . Select 'Hard disk controller' and click 'Next'.

  . Click the button 'Have Disk' ( or press Alt+H ).

  . Make sure the install disk is in drive A(or drive B), and then click 'OK'.

  . A 'Select Device' dialog box will be popup.

  . Select the device that you wish to install and click 'Next'.

  . After this install procedure is complete, you may need to restart the computer.

-------------------------------------------------------------------------
         How to uninstall drivers ?
-------------------------------------------------------------------------
  Use UNINSTAL.BAT under Windows 95 environment.

-------------------------------------------------------------------------
Attention :
-------------------------------------------------------------------------
  1. When the Win95 install the software for primary and secondary channel
     for IDE driver, please DO NOT RESTART COMPUTER after Win95 just finish 
     primary channel. Let Win95 continue to install software for secondary 
     channel. After secondary channel is finished, the RESTART COMPUTER 
     to let new installed IDE driver to take effect.

  2. DOS CD-ROM and IDE drivers will conflict with Ali bus master driver 
     in Win95. Please remove "mscdex" command line from autoexec.bat and 
     remove the specification "device=Your DOS CD-ROM and/or IDE driver" 
     from config.sys. 

  3. Sometimes, the Ali IDE controller has already been installed with the
     standard driver provided by Microsoft. In order to use Ali IDE
     controller with the driver we provided, it is necessary to remove the
     standard driver from "Control Panel/System/Device Manager".

  4. This version support Ultra-33 feature.