How to update the BIOS ?
 ¡@
   Step 1: Make sure the downloaded BIOS is applicable to your motherboard. 
        (Please check the model and the version of your motherboard.) 

 ¡@
   Step 2: Power on the system and enter the pure DOS Mode. 
        (It is not allowed to update BIOS under Windows DOS Mode.) 

 ¡@
   Step 3: Build a new temporary subdirectory, then copy the file to this Subdirectory. 

 ¡@
   Step 4: Go to the temporary subdirectory and run the downloaded file. Because this is a 
        compressed file, you need to de-compress it first. Please remember the full filename of
        ".BIN" file, which is one of these de-compressed files. 

 ¡@
   Step 5: Run "AWDFLASH.EXE" 

 ¡@
   Step 6: Type the filename of the new BIOS according to the instruction. 
        (The filename is " *.BIN ") 

 ¡@
   Step 7: Press "Y" when AWDFLASH.EXE asks whether or not you are going to save the 
        old BIOS. 

 ¡@
   Step 8: Type a filename for the old BIOS. Then Press "Enter". 

 ¡@
   Step 9: Type "Y" when AWDFLASH.EXE asks if you are going to update the BIOS. 
        (NOTE: Don't power down the system or press <Alt+Ctrl+Del> before you finish
        updating BIOS, or it will cause the system to hang permanently.) 

 ¡@
   Step 10: Please reboot your computer after you finish updating the BIOS. 

 ¡@
   Step 11: Press <Del> to enter BIOS setup to execute "LOAD SETUP DEFAULTS."