Steps to install Creative legacy Sound Card on Windows NT 4.0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To install these drivers for different Sound Blaster cards, please read
one of the the following sections carefully:

(1) SB16 sound card 
(2) AWE32 sound card

(1) SB16 SOUND CARD 
    ---------------
    To install the drivers for a SB16 sound card:

    1. Open the Control Panel folder.  Double-click the "Drivers" icon.
       Delete any previously installed Sound Blaster drivers.

    2. Insert the diskette that contains the oemsetup.INF file into a
       floppy drive.

    3. Choose the "Add" button in the "Drivers" dialog box to add the
       SB16 drivers. 
	   
    4. Select the "Unlisted or Updated Driver" option.

    5. You will be prompted to specify the drive and directory where
       the oemsetup.INF file is.  Type in the letter of the drive
       containing the diskette you inserted ("A:" or "B:") and press
       "ENTER".

    6. Select "Creative Tech. Sound Blaster 16".

    7. Click the "New" button.

    8. At this point, you will be prompted to select the Sound Blaster
       hardware settings like base I/O address, DMA, IRQ and MPU-401 port
       settings. All the .SYS files will be copied into the
       C:\WINNT35\SYSTEM32\DRIVERS directory.  The .ACV and .DLL files
       will go into the C:\WINNT35\SYSTEM32 directory.
	   
    9. At the end of the installation, you will be asked to reboot the
       system. Click the "Restart Now" button.
	
	

(2) AWE32 OR SB32 SOUND CARD
    ------------------------
    To install the drivers for an AWE32 or SB32 sound card:
	
    1. Open the Control Panel folder.  Double-click the "Drivers" icon.
       Delete any previously installed Sound Blaster drivers.

    2. Insert the diskette that contains the oemsetup.INF file into a
       floppy drive.

    3. Choose the "Add" button in the "Drivers" dialog box to add the
       SB16 drivers. 
	   
    4. Select the "Unlisted or Updated Driver" option.

    5. You will be prompted to specify the drive and directory where the
       oemsetup.INF file is.  Type in the letter of the drive containing
       the diskette you inserted ("A:" or "B:") and press "ENTER".

    6. Select "Creative Tech. Sound Blaster 16".

    7. Click the "New" button.

    8. At this point, you will be prompted to select the Sound Blaster
       hardware settings like base I/O address, DMA, IRQ and MPU-401 port
       settings. All the .SYS files will be copied into the
       C:\WINNT35\SYSTEM32\DRIVERS directory.  The .ACV and .DLL files
       will go into the C:\WINNT35\SYSTEM32 directory.
	   
    9. At the end of the installation, you will be asked to reboot your
       system.  CLICK THE "Dont' Restart Now" BUTTON AT THIS POINT.

    10.Repeat steps 3 to 5 again.

    11.This time, select the "Creative Sound Blaster AWE32 MIDI Synth"
       option.

    12.At the end of the installation, you will be asked to reboot your
       system.  Click the "Restart Now" button.


		******** END OF legacy.TXT ********