160	English
161	HAWKEYE.HLP
162	#9 International
163	HAWKENU
164	DAN/DEU/ENG/ENU/ESN/ESP/FIN/FRA/FRC/ISL/ITA/JPN/NLD/NOR/PTG/SVE
165	HW95ENU
256	&File
257	&Save Settings
258	&Cancel
259	&Exit
260	&Help
261	&Using #P1
262	&HawkEye Features
263	&About...
264	&Enabled
265	&Disabled
266	&Edit
267	&Copy
272	&OK
273	&Cancel
274	About #P1
275	&Yes
276	&No
277	&Abort
278	&Ignore
279	&Retry
280	&Continue
281	Please press #P1 to continue.
288	Version #P1
289	Disk drive
290	Restart Windows
291	Not Available
292	Not Found
293	Not Used
294	Preview
295	Defaults
296	Language
297	Milliseconds
298	Open
299	Close
304	Colors
305	Color
306	R
307	G
308	B
311	Red
312	Green
313	Blue
314	Monochrome
315	Minimum Color
316	Pseudo Color
317	High Color
318	True Color
319	High Color
320	&White
322	&Red
323	&Green
324	&Blue
336	Monitor
337	Virtual
338	Center messages in:
339	Monitor Area
340	Virtual Area
341	Non Virtual
342	Virtual Resolutions
343	Monitor Resolutions
344	Maximum Monitor Resolution
345	Current Monitor Resolution
346	Virtual Resolution
347	Resolutions
348	Error
352	All Rights Reserved
353	Copyright © 1996
368	Debug Message
369	Could not allocate required 
370	buffer memory.
371	Could not allocate memory for the 
372	GXE File Info Structure.
373	Could not get the protected mode 
374	segment of the BIOS.  Exiting.
376	Please restart Windows in
377	order to use new Drivers
378	Unable to restart Windows.
379	New Drivers Have Been Successfully Loaded
380	Would you like to also install the
381	before restarting Windows ?
382	Video for Windows Runtime
383	S3/Xing Native-MPEG Player
384	Unable to create destination file.\n
385	Try again or cancel #P1.
386	Insufficient memory to copy file\n.
387	Close another application or cancel #P1.
388	Drive #P1 contains #P2 of free disk 
389	space.\n#P3 requires a minimum of #P4.\n
390	Please select another drive.
391	Unable to load library #P1.  Error Number : #P2.
392	Configuration file is missing or corrupted.
393	#P1 cannot find the #P2 file.
394	#P1 cannot create #P2 file.
395	Please verify the distribution diskette.
396	The #P1 directory cannot be created.\n
397	Enter another directory or try another drive.
398	You must restart Windows before the new 
399	settings will be implemented.
416	Would you like to save current settings?
417	Close another application or cancel #P1.
418	#P1 needs the following disk:
419	Would you like to switch to #P1 driver?
420	Unable to identify Board Type.  '#P1' entry 
421	under\n[#P2] section is missing in #P3.
422	#P1 is operational only when a #P2 board 
423	is in use.  Please be sure that the #P2 
424	is properly installed before using #P1.
425	#P1 is operational only when a #P2 driver 
426	is in use.  Please be sure that the #P2 
427	Windows driver has been loaded before using #P1.
428	Unable to find resolution information.  
429	'#P1' entry under\n[#P2] section is missing 
430	in #P3.
431	Filter Initialization Successful
432	#P1 cannot be closed while in Virtual Mode.
433	Unable to identify #P1 BIOS.
434	Sorry, There is not enough disk space.  
435	You need #P1 bytes free for HawkEye.
436	Unable to load HawkEye Motif.
437	Can not use #P1 while zoomed!!
438	Unable to load corrupted file: #P1
439	Unable to load 16 bit library: #P1
440	#P1 Supports Windows Version : #P2
441	Current Windows Version : #P1
464	This version of #P1 was designed for
465	a previous version of Windows
466	This version of #P1 was designed for
467	a later version of Windows
468	Please Contact Number Nine Computer for 
469	information regarding updated software.
470	Contact Number Nine techical support.
512	#9 Resolution Exchange
513	Sets your monitor resolution and color depth.
516	&Font Settings
517	&Automatic
518	&Large (for all resolutions)
519	&Small (for all resolutions)
520	&Font Association...
521	&Switching Parameters...
528	The selected monitor resolution is not supported.
529	Would you like to select different monitor resolution?
530	The selected virtual resolution is not supported.
531	Would you like to select different virtual resolution?
532	Mode Change has been Successfully Recorded
533	Please exit Windows to change resolution.
534	The current resolution is not virtual.
535	Invalid data has been passed to the 
536	hardware specific DLL.
537	Resolution has not been changed.
538	Quick Switch
539	Restart Windows
540	Automatic Assocation
541	Specific Font Size
542	#P1 DPI
543	Exit To DOS
768	#9GXE Status
769	Provides version and configuration status for your #9GXE
772	&Turbo
773	I/O &Mapping
774	&Standard
775	&Alternate
784	Memory Configuration
785	Processor Type
786	Memory Characteristic
787	RAMDAC
788	Clock Generator
789	PROM Type
790	Bus Type
791	BIOS Revision
792	BIOS Date
793	BIOS Message
803	Turbo Mode
804	Configuration File
805	Driver Description
806	Driver Date
807	Windows Driver Version
808	Cursor Type
809	I/O Mapping
810	Data Bus Size
811	#P1 Bits
812	#P1, Revision #P2
816	Bt 485
817	Bt 484
818	ATT 492
819	TI View Point
832	Surface Mount
833	Eats Serial Clocks
848	2061A
849	VGA ROM Data Bus width
850	Display Memory Size
851	Remapped BIOS
852	Windows Disk Version
880	Driver Cursor
881	Processor Cursor
882	RAMDAC Cursor
896	Disabled
897	Enabled
912	ISA
913	EISA
914	VL (VESA Local Bus)
915	PCI Local Bus
916	PAWS
917	MCA
928	Flash PROM
929	Erasable PROM
944	Standard
945	Alternate
960	With Mask Buffer
961	Not Populated
962	Partially Populated
963	Fully Populated
964	On board VGA
1024	#9 Stop Box
1025	Limits virtual panning to the current monitor area.
1028	Stop Direction:
1029	Border Color:
1030	Both
1031	Horizontal
1032	Vertical
1033	&Off
1040	#9 Place Windows
1041	Maximizes applications to monitor area and centers message boxes.
1044	&Message Boxes
1045	Center in &Monitor
1046	Center in &Virtual
1056	#9 Chameleon Cursor
1057	Sets your hardware cursor color and size.
1060	Preview Cursor
1061	&Cursor Size
1062	&Standard
1063	&Large
1064	&Extra Large
1072	#9 Zoom
1073	Zooms your monitor area instantaneously.
1076	Zoom Factors:
1088	#9 HawkEye Activation
1089	Assigns HawkEye features to mouse buttons or function keys
1092	Mouse Selections
1093	Keyboard Selections
1094	Each HawkEye feature must have a unique Key.
1095	The function context and the function key\n
1096	must be defined for each HawkEye feature.
1098	&Mode
1099	&Control
1100	&Activate
1101	&View
1102	These are your HawkEye settings.
1103	Please select desired mouse button or keystroke.
1104	Please assign #P1 feature to a mouse button or keystroke.
1107	Properties for HawkEye 95
1108	Shut Down HawkEye 95
1109	About HawkEye 95
1110	Display utilities from Number Nine Visual Technology
1120	#9 International Exchange
1121	Select language for #9 HawkEye applications and on-line help
1124	&Language
1125	#P1 is selected as the language for your
1126	HawkEye applications.  To select another 
1127	language, click on another icon.
1128	Select Language
1152	#9 Quick Menu
1153	Provide access to current window menu.
1156	Menu &Type
1157	Menu &Position
1158	&Vertical
1159	&Horizontal
1160	Centered in &Monitor
1161	At Cursor &Position
1280	#9 Monitor Adjustment
1281	Sets your monitor refresh rates.
1284	Save as &Monitor
1285	Max Monitor &Resolution
1286	&Utilities
1287	Display Monitor &List
1288	&Gamma Correction
1296	Monitor Selected
1297	Display Position
1298	Display Refresh Rate
1299	Vertical Refresh Rate
1300	Horizontal Scan Rate
1312	Monitor Adjustment
1313	Monitor Synchronizing
1314	Utility
1315	Monitor List
1316	Refresh Rate
1317	Hz
1318	KHz
1319	Brightness
1320	Restore Display Settings
1321	Gamma Correction
1328	Shift Left/Right Arrows = 
1329	Adjusts screen positon left/right.\n
1330	Shift Up/Down Arrows = 
1331	Adjusts screen position up/down.\n
1332	PageUp/PageDown = 
1333	Increases/decreases refresh rate.\n
1334	Escape/Home = 
1335	Restores Defaults
1344	Monitor settings provided by Number Nine 
1345	Computer Corporation cannot be modified.
1346	Save current settings by what monitor name?
1347	Monitor name selected already has saved 
1348	settings.\n Would you like to replace them?
1360	To reduce eyestrain, refresh rates above 60 Hz are 
1361	recommended for ALL resolutions you plan to use.  
1362	Check your monitor's documentation to see if it 
1363	supports the Horizontal Scan Rate (see the Monitor 
1364	Adjustment menu) that corresponds to the refresh 
1365	rate you have selected.  Using an unsupported scan 
1366	rate can damage some older monitors.
1376	The test that follows will help you determine if your 
1377	monitor supports the selected refresh rate.  Your 
1378	monitor is set to the new rate for five seconds, then 
1379	is returned the previous setting.  If your screen does 
1380	not synchronize properly during the test, it is 
1381	unlikely that your monitor supports the selected 
1382	refresh rate at the resolution you are using.  Refer 
1383	to your monitor's documentation for more information.
1392	If your monitor does not synchronize 
1393	correctly during the 5 second test 
1394	period, you should NOT change the 
1395	refresh rate.  If your monitor synchronizes 
1396	satisfactorily, it may be safe to use 
1397	the higher refresh rate.
1398	Restoring factory defaults
1399	will modify all the display
1400	settings for all resolutions.
1401	This will replace all of the 
1402	changes made previously.\n
1403	Do you want to continue?
1404	Begin Test
1405	This Utility will not work 
1406	with this Windows driver.
1407	Restore Factory Defaults
1408	&Options
1409	Test
1410	Do you want to save your settings?
1411	Error Initializing Board!\nExiting.
1424	&Custom
1425	&Apply
1426	Custom Monitor Adjustment Settings
1427	Display Only VESA Modes
1428	Refresh Rate Selection
1429	Custom Refresh Rate
1536	#P1 Setup
1537	Allows user to install #P1 software
1552	#P1 Windows Display Driver
1553	#P1 HawkEye Feature Set
1557	Before continuing, you must first update the Windows '95 
1558	Registry for the Number Nine #P1 Device Driver.  
1559	Click on OK now, and refer to the 'Registry Instructions 
1560	for HawkEye '95 Drivers' included in the READ_ME.TXT file.\n\n
1562	Once you have updated the Windows '95 Registry, 
1563	run Setup.exe again.\n\n
1564	Caution:  If you do not update the Registry, 
1565	Setup.exe will not complete.
1568	#P1 has successfully installed the #P2 software.
1570	#P1 has installed the software successfully\n
1571	but could not add the HawkEye group to the 
1572	Program Manager.
1573	The software has not been successfully installed.\n
1574	You must run #P1 again before using the software.
1575	#P1 has not completed installing the software.\n
1576	Are you sure you want to cancel?
1584	Please select
1585	the maximum 
1586	resolution your
1587	monitor can display.
1588	Selected monitor resolution is not supported 
1589	with this board configuration\n.  Monitor 
1590	resolution will be set to #P1
1616	You have selected #P1 resolution.  
1617	Windows will be set to this resolution when restarted.  
1618	Are you sure your monitor can display this resolution?
1632	#P1 Hawkeye and Windows Setup
1633	The #P1 Windows Setup Application will:
1634	- Copy the #P1 Windows Driver files into
1635	  the current Windows System directory.
1636	- Modify the existing SYSTEM.INI and WIN.INI
1637	  files. 
1639	- Copy HawkEye Applications into the new
1640	  NUMBER9 Directory under Windows.
1641	- Create HawkEye Program Group
1642	- Create the configuration file:
1643	Install the Number Nine wallpaper.
1646	Error Opening TIGA
1647	Setup needs the following disk:
1648	Application Diskette
1649	Copying Files...
1650	Unsquishing...
1652	UnSquish which File?
1653	Destination of UnSquished File
1654	Squish which File?
1655	Destination of Squished File
1656	About to Compress:\n%s\nto\n%s
1657	The file specified is not squished.
1658	About to UnCompress:\n%s\nto\n%s
1659	UnSquishing Complete.
1660	Squish a File
1661	UnSquish a File
1662	Squish for Windows
1663	Please Wait - UnSquishing
1664	Please Wait - Squishing
1665	Compression Complete
1680	#P1 has detected that you are using a 
1681	virtual resolution.  In order to continue, #P1
1682	must switch into a non-virtual resolution.
1683	The Number Nine graphics adapter can not be identified
1684	 until this file is found.
1792	&Refresh
1793	&Monitor
1794	Current Monitor
1795	Monitor Models
1796	Monitor Selection
1797	Please enter the path of your
1798	monitor's VESA file.
1799	Go Back
1800	Selecting a new monitor will overwrite 
1801	any monitor adjustments previously 
1802	saved.\n
1803	Do you want to continue?
1804	Please restart Windows in order 
1805	to use the new Monitor Selection.
1806	Supports VESA Power Management
1807	Selecting VESA Power Management will allow 
1808	Number Nine's Power Saver to turn off the 
1809	monitor and save energy.  Damage may be 
1810	done to your monitor if it does not support 
1811	this feature.  Are you sure 
1812	your monitor supports this feature?
1815	Leave Windows
1816	Gamma correction is not supported 
1817	on this device at this color depth.
1818	Could not allocate Gamma information.  
1819	Please close some windows to provide 
1820	memory for Gamma Correction.
1821	Red
1822	Green
1823	Blue
1824	Cyan
1825	Magenta
1826	Yellow
1827	Contrast
1828	Gamma Correction
1829	Set Default...
1830	Save &As...
1831	Open...
1832	&RGB
1833	&CMY
1834	C&ontrast
1835	&Curve
1836	&Free Hand
1837	&Linear
1838	&Invert
1839	Reset &Gamma
1840	Monitor Selection
1841	Gamma Correction
1842	Switch to a color depth of 65,536 or higher to use ColorPerfect gamma correction.
1843	Could not allocate Gamma information.  Please close some windows to provide memory for Gamma Correction.
1844	&Save
1845	Reset Gamma
1846	Sorry, I could not save the gamma correction data to that file.
1847	Would you like to save your changes before loading new values?
1848	Would you like to save your changes?
1849	Save Gamma Correction As...
1850	Read Gamma Correction File
1851	Sorry, this is not a gamma data file.
1852	Gamma Correction Autoload File
1853	Color Selection Mode
1854	Ramping Style
1855	File Options
1856	#9 Color Perfect
1857	Provides color gamma correction for your monitor.
1872	Sorry, that file cannot be read as 
1873	a VESA file.
1888	#9 Energy Saver
1889	Controls power-down sequence for Energy Star compliant monitors
2048	On
2049	Off
2050	Operations
2051	There will be a maximum 
2052	of 33% energy savings with 
2053	darkening the screen.
2054	After %d minute of being idle 
2055	the screen saver will 
2056	darken the screen. 
2057	After %d minutes of being idle 
2064	the screen saver will 
2065	darken the screen.
2066	There will be a maximum 
2067	of 90% savings in energy 
2068	with turning off the screen.
2069	After %d minute of the screen being 
2070	darkened, the monitor will be set 
2071	into it's off mode.
2072	After %d minutes of the screen being 
2073	darkened, the monitor will be set 
2080	into it's off mode.
2081	The screen saver will immediately 
2082	turn off the monitor after the screen 
2083	is darkened.
2084	The Number Nine Green PC screen saver is 
2085	currently not set up to save the screen.  
2086	Would you like to use it?
2088	Delay
2089	Minutes
2100	There will be no power savings 
2101	when the monitor is darkened.
2103	The monitor selected does not 
2104	support the VESA power management 
2105	specifications.
2112	Idle time in minutes 
2113	before the screen is darkened.
2115	Test Energy Saver
2116	Using #9GXE Energy saver to save energy on a 
2117	monitor that does not meet VESA Power Management 
2118	specifications can damage the monitor.  
2120	If during this test the monitor is not blank 
2121	and smooth it does not meet the specifications.  
2128	Please refer to your monitor's documentation 
2129	for more information.
2130	Was the screen a steady black?
2131	Screen Saver
2132	Energy Saver
2304	Were you satisfied with the new refresh rate?
2305	If your monitor is not listed please select the Unlisted Monitor entry.
2307	For troubleshooting information view the 
2308	READ_ME.TXT file in the NUMBER9 subdirectory 
2309	within your Windows directory.
2311	Unlisted Monitor
2312	Specifications
2313	Caution
2314	You have selected #P1 as your monitor model.  
2315	An incorrect selection may result in damage 
2316	to your monitor.
2318	You have elected to access your monitor's DDC information 
2319	and to add it to your monlist.ini file.  Your monitor's screen 
2320	may darken briefly during this time period.
2322	Your graphics card does not have DDC capabilities.
2324	Your monitor does not have DDC capabilities.
2336	Save windows on exit.
2337	Use preferred windows.
2338	Browse
2339	Relative Position
2340	Absolute Position
2341	Window Placement
2342	Method to Restore Windows
2343	#P1 Control Panel
2344	#P1 files
2345	The selected file already contains Windows configuration 
2346	data.  Would you like to replace it?
2349	#P1 is Moving Application
2350	#P1 is Executing Application
2351	Looking for:  #P1
2352	Waiting for Application Initialization
2353	#P1 Configuration
2354	Save Layout
2355	Load Layout
2356	Initializing Restoration Routines
2357	Method to Restore Windows
2358	There are no saved windows to restore.
2359	The #P1's DLL for saving windows is 
2360	not loaded.  #P1 will not be fully 
2361	operational until this is installed.
2363	Déjà View
2364	Remembers running applications and restores them.
2365	#P1 Configuration
2366	#P1 Save File
2367	There are no saved windows to restore.
2368	The selected file already contains Windows 
2369	configuration data.  
2370	Would you like to replace it?
2372	There is not enough memory to 
2373	restore all applications.  
2560	Source Cache
2561	Font Cache
2562	Polygon Support
2563	Ellipse Support
2565	Enable Loopthru
2816	#9 Status
2817	Provides version and configuration status for your graphics accelerator.
2818	Number Nine Product Name
2819	#P1 Megabytes #P2
2820	Status Information
2821	Hardware Information
2822	BIOS Information
2823	Driver Information
2825	Current Monitor
2826	Disk Version
2827	Driver ID
2828	Driver Version
2829	Monitor Resolution
3072	Cannot Lock Memory
3073	No Memory is available for Monitor Information
3074	Monitor List Memory Error
3075	The maximum resolution selected 
3076	is not supported by this version.  
3077	Please select another.
3078	 
3079	Your Number Nine Configuration File 
3080	has been successfully customized to 
3081	reflect your monitor choice.
3082	 
3328	#9 Hawk Keys
3329	Assigns a HawkEye function to a hotkey.
3330	To assign a HawkEye function to a hotkey:\n   Click on the desired HawkEye icon.\n   Press any valid sequence of keys.\n   Press the <enter> key to confirm.\n      Click Help for details on valid keys.
3344	You must restart your computer before the new settings will take place.\n\nDo you want to restart your computer now?
3345	Display Settings Changed
3584	617-862-7502 (USA)
3599