100 Recall snapshot #1\nRecall snapshot #1 101 Recall snapshot #2\nRecall snapshot #2 102 Recall snapshot #3\nRecall snapshot #3 103 Recall snapshot #4\nRecall snapshot #4 104 Recall snapshot #5\nRecall snapshot #5 105 Recall snapshot #6\nRecall snapshot #6 106 Recall snapshot #7\nRecall snapshot #7 107 Recall snapshot #8\nRecall snapshot #8 110 Store snapshot #1\nStore snapshot #1 111 Store snapshot #2\nStore snapshot #2 112 Store snapshot #3\nStore snapshot #3 113 Store snapshot #4\nStore snapshot #4 114 Store snapshot #5\nStore snapshot #5 115 Store snapshot #6\nStore snapshot #6 116 Store snapshot #7\nStore snapshot #7 117 Store snapshot #8\nStore snapshot #8 130 Play / Continue play\nPlay 131 Stop / Go to selection start or wave start\nStop 132 Open record dialog\nRecord 133 Move cursor back\nRewind 134 Move cursor forwards\nForward 141 Deletes everything outside the selection 151 Swap the left and right channels 152 Silences (mute) the selection\nSilence 154 Show/Hide the snapshot window 155 Show/Hide the transport window 156 Shows/Hides the control bar 162 Scrolls the window during playback 165 Inserts several copies of data on the clipboard 169 For debug purposes only 170 Edit the playback volume\nVolume 182 For debug purposes only 183 Maximize the width of the active window 184 Toggle play loop mode\nLoop switch 185 Inserts silence at the selection (data is moved, not replaced) 193 Finds the peak level in the selection 196 Opens a new window to the same data as in the active window 197 Display the available disk space 198 Locate and delete a file 200 Creates a new file containing the selection 204 Normalize the level of the selection 205 Reverses the selection 206 Select "nudge left" tool\n"nudge left" tool 207 Select "nudge right" tool\n"nudge right" tool 208 Select default edit tool\nDefault edit tool 210 Select Play tool\nPlay tool 212 Show/Hide the tool box 213 Select Magnifying glass\nMagnifying glass 214 Display markers in file, as a list 239 Clipboard functions 240 Open a window to edit the data from the clipboard 241 Clears the clipboard 249 Special paste operations 250 Overwrite with the data from the clipboard 251 Insert data from the clipboard at the end of the wave 252 Insert data from the clipboard at the beginning of the wave 254 Locate and open a file 255 Locate and open an audio file\nOpen 256 Locate and open a project 257 Locate and open a database 264 Play the sound with an 8 bit resolution only 277 Wave window styles 278 Default style 279 Preset style 280 Preset style 281 Preset style 282 Preset style 283 Preset style 284 Save the style of the active window 326 Move the wave cursor 327 Move cursor to start of wave\nGo to Start 328 Moves cursor to end of wave\nGo to end 329 Moves cursor to start of selection 330 Moves cursor to end of selection 331 Moves the cursor to the specified position 346 Selects from start to cursor 347 Selects from cursor to end 348 Extended select options 349 Selects the entire wave 352 Adjusts the selection height to the peak level of the selection 353 Remove/Restore the selection 360 Scroll the wave display to a new position 361 Scrolls to start of wave 362 Scrolls to end of wave 363 Scrolls to start of selection 364 Scrolls to end of selection 365 Scrolls to cursor position 370 Inverts the data around the time axis 380 Opens a dialog for editing overall settings 383 Eliminate the DC offset of the selection 384 Mix the data on the clipboard with the selection 457 Parametric equalizer 481 Recover the memory used by undo, for the active file 482 Apply a fade-in to the selection 483 Apply a fade-out to the selection 484 Crossfade the data on the clipboard and the selection 485 Displays a 3D frequency analysis of the selected data 486 Edits the settings for the frequency analysis 487 Change the length of the selection without affecting the pitch 488 Change the pitch of the selection with or without changing the length 489 Apply a chorus effect to the selection 490 Create polyphonic chords from the selection 493 Convert the sample rate 495 Add file(s) to active database 496 Search for files and adds them to the active database 501 Find files throughout the active database 502 Sets up a Global filter for the database 517 Displays files as a list with their attributes 518 Displays files as a simple list 519 Displays files as small icons 520 Displays files as icons 533 Create a new file 534 Create a new audio file 535 Locate and create a new project 536 Locate and create a new database 537 Close selected windows 538 Close all windows 539 Close all wave windows 550 Minimize selected windows 551 Minimize all windows\nMinimize all 552 Minimize all wave windows 560 Restore selected iconized windows 561 Open all minimized windows 562 Open all minimized wave windows 586 Extended save operations 587 Save a copy of the file in another audio format 588 Save a copy of the file 589 Save the left channel in the active window as a new file 590 Save the right channel in the active window as a new file 600 Open the batch processor 601 Modify the dynamics of the selection 607 Change the gain of the selection 608 Toggles the find zero-crossing function on/off. 609 Magnetize markers and edges for drag and drop operations 10000 You cannot save this channel using the name of the other channel. 10001 This folder can not be used for temporary files.\nPlease select another folder, on a hard disk with sufficient amounts of free space. 10002 A file with this name already exists. Please use another name. 10003 The output folder is not a valid one.\nPlease select a valid folder. 10004 The data you are about to paste is shorter than the selection it is to be crossfaded with. This is not allowed. Please try again, with for example a smaller selection. 10005 A preset with this name already exists. To create a new Preset, use another name. To replace an existing Preset, use the "Update" button instead. 10006 This operation replaces %s with the current settings. Are you sure you want to do this? 10007 A preset with the name %s already exists in the list. You can therefore not rename %s to %s. Please use another name. 10008 Are you sure you want to delete %s ? 10009 Are you sure you want to rename the item? 10010 This name already exists at the same level in the hierarchy. Please use another name. 10011 Are you sure you want to Remove this folder (and all items in it) from the Database? 10012 Are you sure you want to delete this category and all its sub-categories? (Files in this category will remain in the Database, but will become "unregistered") 10013 Are you sure you want to remove this group (and all items in it) from the Project? 10014 Cannot find the file %s. It might have been moved, renamed, or the drive it is on is currently not accessible. 10015 Do you want to delete the item(s) ? 10016 %s\nAre you sure you want to delete this file permanently from disk? 10017 The volume can't be found. Please insert the %s labeled: "%s" and try again. 10018 The top level in the selection is %s 10019 Number of Undo stages: %i\nNumber of Redo stages: %i\nDynamic memory (RAM) that will become available: %i.%.3i KB\nNumber of temporary files: %i\nDisk space that will become available: %i.%.3i MB\n\nAre you sure you want to make this memory available and lose the current Undo/Redo stages? 10020 There are no tasks defined in the Task list. Do you want to proceed anyway? 10021 The file %s is already open. The Batch processing can therefore not run as specified (the file is supposed to be overwritten in the process). Please close the file and try again. 10022 The data you are about to paste is shorter than the selection it is to be crossfaded with. This is not allowed. Please try again, with for example a smaller selection. 10023 To edit the graph using the mouse, please activate the "Graphic Editing" checkbox. 10024 Please insert your original WaveLab CD-ROM. If you do not currently have access to the CD-ROM, click CANCEL. The program will run normally but the CD-ROM will be requested again later. 10025 You are trying to open an unknown audio file type. 10026 There seems to be something wrong with the format of this AIFF file. It can not be opened. Most probably, the application that created this file is responsible. For security reasons, WaveLab will not open a file that is not perfectly formatted. 10027 This audio file seems to be corrupted. No data could be found in the file. Most probably, the application that created this file is responsible. For security reasons, WaveLab will not open a file that is not perfectly formatted. 10028 This audio format is not recognized by WaveLab. The file can not be opened. 10029 An error occurred! The file can not be opened. It is possibly corrupted. Most probably, the application that created this file is responsible. For security reasons, WaveLab will not open a file that is not perfectly formatted. 10030 This seems to be a RIFF file, but not a WAVE file. It does not contain any waveform data. 10031 There seems to be something wrong with the format of this WAVE file. It can not be opened. Most probably, the application that created this file is responsible. For security reasons, WaveLab will not open a file that is not perfectly formatted. 10032 This Wave file contains an unknown audio data format. It cannot be opened. 10033 An error occurred! The Wave file could not be saved to disk! Try saving to another drive or partition. 10034 An error occurred! The Wave file you saved could not be closed! 10035 An error occurred! A data chunk could not be created when saving to disk! Try saving to another drive or partition. 10036 An error occurred! A data chunk could not be saved correctly. 10037 Cannot create a mixer since no mixer driver can be found for the wave device. Please make sure you have selected the audio card correctly in the Preferences dialog (do not select "Microsoft Sound Mapper"). 10038 WaveLab has received an error message from your card's mixer driver :\nThe recording inputs can not be adjusted. 10039 An error occurred. The mixer driver does not respond correctly (MIXER_GETLINEINFOF_SOURCE). 10040 An error occurred. The mixer driver does not respond correctly (MIXER_GETLINECONTROLSF_ALL). 10041 An error occurred. The mixer driver does not respond correctly (MIXER_GETCONTROLDETAILSF_VALUE). 10042 An unknown error occurred while trying to record. Please try again. 10043 Cannot open Wave device for recording. Are you sure your audio card supports the currently specified sample rate and/or bit resolution? 10044 The batch processing has been cancelled because of an error. 10045 A mono file can not be processed in this batch. It is already open in WaveLab as part of a dual-mono stereo pair. Please close it and try again. 10046 Cannot play back. Are you sure your audio card supports the file's sample rate and/or bit resolution. 10047 This audio file seems to contain corrupted or damaged data. It can not be opened. Most probably, the application that created this file is responsible. For security reasons, WaveLab will not open a file that is not perfectly formatted. 10048 This drive/partition is the one that holds the temporary files used for recording and undo. You need to delete one or more files on this partition to increase disk space. As an alternative, you can use the "Preferences" dialog to select another drive/partition for your temporary files. 10049 Sorry, you are not allowed to increase so much the Wave size (1 Giga limit). You should consider working with smaller audio files. 10050 Please insert your original WaveLab CD-ROM. 10051 The file %s is write-protected. You can therefore not save the changes. Try saving the file under another name. 10052 The batch processing could not be performed. One of the files that was supposed to be overwritten is already open. Please close it and try again. 10053 Do you want to continue batch processing? 10054 The sample you are about to paste in does not have the same sample rate as the file into which you paste. The pasted section will therefore play at the wrong pitch. (Please note that you can change sample rates with the "Convert Sample Rate" function.)\nDo you want to paste anyway? 10055 The DC offset in the selection is %.2f %% (%d level units)\nDo you want to remove this DC offset? 10056 The DC offsets in the selection are :\nLeft channel : %.2f %% (%d level units)\nRight channel : %.2f %% (%d level units)\nDo you want to remove these DC offsets? 10057 There is no DC offset in the selection. 11000 General 11001 Toolbars/Status Bar 11002 Editing 11003 File 11004 Display 11005 Units 11006 Tempo/Time code 11007 Database 11008 Settings 11009 Presets 11010 Text 11011 Format 11012 Date && Size 11013 Audio Files 11014 Tasks 11015 Style 11016 Perspective 11017 Frequency 11018 Expert 11019 Left Peak : 11020 Right Peak : 11021 Recorded Time : 11022 Disk Capacity : 11023 &Record 11024 &Play 11025 &Stop 11026 Master Gain 11027 Marker 11028 Name 11029 Position 11030 Default 11031 Cut 11032 Copy 11033 Paste 11036 Undo 11037 Redo 11038 Delete 11039 Trim 11040 Silence 11041 Creating peak file 11042 Save LEFT channel as... 11043 Save RIGHT channel as... 11045 Input file : 11046 Output file : 11047 Analysis 11048 Convert Rate 11049 Fade In 11050 Fade Out 11051 Harmonize 11052 Chorus 11053 Pitch Correction 11054 Change Gain 11055 Time Stretch 11056 EQ 11057 Searching peak 11058 Reverse 11059 Invert Phase 11060 Eliminate DC Offset 11061 Mix 11062 Merging Channels 11063 Normalize 11064 Dynamics 11066 Writing file 11067 Crossfade 11068 Move 11069 Push 11071 Insert Silence 11072 Swap Channels 11073 Copy/Create new Wave 11074 Paste multiple copies 11075 Moving samples 11076 Current 11077 Select file(s) 11078 Pasting/Overwriting samples 11079 Paste (append) 11080 Paste (prepend) 11081 Control Bar 11082 Transport 11083 Snaps 11084 Tools 11085 Frequency Analysis 11086 Disk Info 11088 Project 11089 Wave 11090 Database (*.dba)|*.dba| 11091 Project (*.prj)|*.prj| 11092 WAV files (*.wav)|*.wav|AIFF files (*.aif)|*.aif|All Audio files|*.wav;*.aif|All files (*.*)|*.*| 11093 WAV files (*.wav)|*.wav|AIFF files (*.aif)|*.aif|All Audio files|*.wav;*.aif| 11094 Opening and Displaying Wave 11095 Mono 11096 Stereo 11097 Dual-Mono 11098 Mono 8 bit 11099 Mono 16 bit 11100 Stereo 8 bit 11101 Stereo 16 bit 11102 Hide Marker Heads 11103 Show Markers Heads 11104 Global Search 11105 Search in Folder 11106 Search in Category 11107 Search in List 11108 Define Global Filter 11109 Scan Files on Disk 11110 Sync Database to Disk 11112 Scan 11113 Search 11115 Close 11116 selected items 11117 Delete a file 11118 English 11119 French (Français) 11120 German (Deutsch) 11121 Playback Capabilities: 11122 Recording Capabilities: 11123 Driver Version: 11124 Downward Slope 11125 Upward Slope 11126 Any Slope 11127 Swap Channels 11128 Remove DC offset 11129 Invert Phase 11130 Reverse Time 11131 Pitch Correction 11132 Chorus 11133 Fade 11134 Crossfade 11135 Harmonizer 11136 Equalizer 11137 Change Gain 11138 Convert Attributes 11139 Normalize 11140 Convert Sample Rate 11141 Dynamics 11142 Time Stretch 11143 Clipboard 11144 Free disk space 11145 Locate and name the new project 11146 Locate and name the new database 11147 AudioAccess browser for 11148 Categories 11149 Files 11150 Folders 11151 Location 11152 Category 11153 Type 11154 Channels 11155 Res 11156 Rate 11157 Size 11158 Date 11159 Keywords 11160 Comment 11161 Searching files 11163 Syncing to disk 11164 Select file(s) to add to the database 11165 Select file(s) to add to the project 11166 item in list 11167 items in list 11168 Global Filter 11169 volume 11170 CD-ROM 11171 floppy disk 11172 Very Narrow 11173 Narrow 11174 Linear 11175 Wide 11176 Very Wide 11177 voice in chord 11178 voices in chord 11179 Voice 11180 This Demo of WaveLab has been used during 15 minutes. If you wish to continue evaluating WaveLab, run the program again. 11181 This Demo of WaveLab does not allow you to save Audio files. 11182 This Demo of WaveLab allows you to create and edit Audio Database, but you are not allowed to reopen them. 11183 This Demo of WaveLab does not allow you to save Audio files, therefore you are not able to run the Batch process. 11184 This Demo of WaveLab does not allow you to record Audio material. 11185 The file %s is already open. The Batch processing can therefore not run. Please close the file and try again. 11186 Batch 11187 Specifications : 11188 item(s) 18000 An error occurred. The file could not be opened. 18001 An error occurred. The file could not be deleted. 18002 The program was unable to read properly from this drive/partition. If this problem persists, please check the integrity of the disk, it might be damaged. 18003 The program was unable to write properly to this drive/partition. If this problem persists, please check the integrity of the disk, it might be damaged. 18004 The program was unable to seek properly on this drive/partition. If this problem persists, please check the integrity of the disk, it might be damaged. 18005 An error occurred. The file could not be resized. 18006 An error occurred. The file could not be copied. 18007 An unknown error occurred. The file could not be moved. 18008 Invalid directory name. 18009 This file is already in use by an application. It can therefore not be overwritten. Please use another name. 18010 A file with this name already exists. Do you want to make a backup of this file before saving the new one? (In the backup, the first letter in the extension will be changed to a ~ )? 18011 The backup file could not be created! The whole operation has been canceled and your file has not been saved! 18012 File error 18013 The file could not be renamed. Please make sure that the disk is not write protected and that the file is not already open. 18014 This disk partition could not be accessed. If it is a CD-ROM or a removable disk, make sure the disk is inserted properly. 18015 The partition could not be given a label. Make sure the disk is not write protected. 18016 An error occurred. The file could not be created. 18017 An unknown error occurred. The file attributes could not be set. 18018 An error occurred. The directory could not be created. 18019 There is not enough disk space on partition %s. 18020 An error occurred. The file could not be uncompressed/copied. 18021 Unknown file error: Unable to create mapped file. 18022 Serious error. It is not possible to increase the database size. You must close the file now! 18023 It is not possible to increase the database size. The disk is probably full. 18024 This file is of the wrong type. 18025 The file %s could not be accessed. It is already in use by some other application. This application must be finished before the file can be accessed 18026 File error caused by a lack of virtual memory. Please increase the size of the virtual memory file in the Windows' Control Panel (System / Virtual Memory settings). 18027 Windows cannot open more files on that drive. 18028 The file has no access rights. 19000 This document is already open. Do you want to close it without saving any changes and open the version on disk instead? 19001 This document contains unsaved changes. Are you sure you want to revert to the last saved version? 19002 Do you want to save this document ( %s ) before closing? 19003 The name you have specified is used by a file which is currently open. Please close that file or use another name. 19004 Do you really want to stop the current operation? 19005 The following error code was reported by Windows: 19006 Untitled 19007 Untitled 19008 completed in 19009 Elapsed : 19010 Remaining (estimation) : 19011 Press the Control key to prevent docking 19012 OK 19013 Cancel 19014 Select Folder 19015 Name 19016 Folder 19017 Size 19018 Date 20000 Redo the last undone operation\nRedo 20001 Minimize all open windows\nMinimize windows 20002 Create a new audio file\nNew 20003 Open an existing document\nOpen 20004 Cascade open windows\nCascade windows 20005 Tile open windows vertically\nTile windows 20007 Prompt to save the modified files and quit 20011 Delete the selected data\nDelete 20013 Display the topics of the help system 20016 Display version and copyright information 20018 Reverts the file back to its last saved state 20021 Undo the last operation\nUndo 20022 Cut out selected data to the clipboard\nCut 20023 Copy selected data to the clipboard\nCopy 20024 Insert data from the clipboard\nPaste 20025 Save the file in the active window\nSave 20026 Save the file in the active window under a new name 20027 Closes the the active window and all other windows that show the same data 20030 Opens this file 20031 Opens this file 20032 Opens this file 20033 Opens this file 20034 Opens this file 20035 Opens this file 20036 Opens this file 20037 Opens this file 20038 Opens this file 20039 Opens this file 20096 Activate/Deactivate Tip of the day 20097 Informations about the active document 24363 Tile open windows horizontally\nTile windows 24364 Arrange all minimized windows\nReposition icons 24365 Close all windows