16	Monitor Adjustment
161	HAWKEYE.HLP
256	&File
257	&Save Settings
259	&Exit
260	&Help
263	&About...
272	&OK
273	&Cancel
274	About #P1
275	&Yes
276	&No
280	C&ontinue
288	Version #P1
290	Restart Windows
294	Preview
295	Defaults
344	Maximum Monitor Resolution
352	All Rights Reserved
353	(c) 1992 - 1995
371	Could not allocate memory for the 
372	GXE File Info Structure.
373	Could not get the protected mode 
374	segment of the BIOS.  Exiting.
394	#P1 cannot create #P2 file.
422	#P1 is operational only\nwhen a #P2 board 
423	is in use.  Please be sure\nthat the #P2 
424	is properly installed before\nusing #P1.
437	Can not use #P1 while zoomed!!
804	Configuration File
1280	Monitor Adjustment
1281	Set monitor refresh parameters
1284	Save as &Monitor
1286	&Utilities
1296	Monitor Selected
1297	Display Position
1298	Display Refresh Rate
1299	Vertical Refresh Rate
1300	Horizontal Scan Rate
1301	Vertical Refresh Rate (* VESA)
1312	Monitor Adjustment
1313	Monitor Synchronizing
1314	Utility
1315	Monitor Selection
1316	Refresh Rate
1317	Hz
1318	KHz
1319	Brightness
1320	Restore Display Settings
1321	Gamma Correction
1328	Shift Left/Right Arrows = 
1329	Adjusts screen position left/right.\n
1330	Shift Up/Down Arrows = 
1331	Adjusts screen position up/down.\n
1332	PageUp/PageDown = 
1333	Increases/decreases refresh rate.\n
1334	Escape/Home = 
1335	Restores Defaults
1360	To reduce eyestrain, refresh rates above 60 Hz are 
1361	recommended for ALL resolutions you plan to use.  
1362	Check your monitor's documentation to see if it 
1363	supports the Horizontal Scan Rate (see the Monitor 
1364	Adjustment menu) that corresponds to the refresh 
1365	rate you have selected.  Using an unsupported scan 
1366	rate can damage some older monitors.
1376	The test that follows will help you determine if your 
1377	monitor supports the selected refresh rate.  Your 
1378	monitor is set to the new rate for five seconds, then 
1379	is returned the previous setting.  If your screen does 
1380	not synchronize properly during the test, it is 
1381	unlikely that your monitor supports the selected 
1382	refresh rate at the resolution you are using.  Refer 
1383	to your monitor's documentation for more information.
1398	Restoring factory defaults 
1399	will modify all of the display 
1400	settings for every resolution.  
1401	This will replace all of the 
1402	changes made previously.\n  
1403	Do you want to continue?
1405	This Utility will not work 
1406	with this Windows driver.
1407	Restore Factory Defaults 
1408	&Options
1409	&Test
1410	Do you want to save your settings?
1411	Error Initializing Board!\nExiting.
1792	&Refresh
1793	&Monitor
1796	Monitor Selection
1799	Go Back
1800	Selecting a new monitor will overwrite 
1801	any monitor adjustments previously 
1802	saved.\n
1803	Do you want to continue?
1804	Please restart Windows in order 
1805	to use the new Monitor Selection.
1815	Leave Windows
2304	Were you satisfied with the new refresh rate?
2307	For troubleshooting information view the 
2308	READ_ME.TXT file in the NUMBER9 subdirectory 
2309	within your Windows directory.
2313	Caution
2314	You have selected #P1 as your monitor model.  
2315	An incorrect selection may result in damage 
2316	to your monitor.
2318	You have elected to access your monitor's DDC information 
2319	and to add it to your monlist.ini file.  Your monitor's screen 
2320	may darken briefly during this time period.
2322	Your graphics card does not have DDC capabilities.
2324	Your monitor does not have DDC capabilities.