1	Drive Type:
2	Disk in drive %c: is %s
3	not protected.
4	write-protected.
5	write-protected with password.
6	read/write-protected.
7	&Change Password.
8	&Change or Remove Password.
9	Unprotect Disk in Drive %c:
10	&Remove protection
12	Write Protect Disk in Drive %c:
13	Change Password for Disk in Drive %c:
14	Password for Disk in Drive %c:
15	Drive
16	Enter the Current Password:
17	Enter New Password:
18	Enter Old Password:
19	Retype New Password:
20	You have entered an INVALID password!
21	Serial Number:
22	Auto Sleep Time:
23	ROM Version:
24	ROM Date:
25	SCSI ID:
26	Logical Unit #:
27	Disk Type:
28	Total Bytes:
29	Bytes Available:
30	Format Type:
31	Volume Label:
32	Field Formatted:
33	Julian Date:
34	Disk Life Status:
35	Format Status:
36	Protect Status:
37	Adapter Type:
38	Interrupt Vector:
39	Memory Address:
40	I/O Port Address:
41	Buffer Address:
42	Processor:
43	Windows Version:
44	Available Memory:
45	Windows Mode:
46	Write-protected
47	Read/Write-protected
48	Unprotected until eject
49	Protect Caution for Disk in Drive %c:
50	DOS Version:
51	Unprotected
52	Present Disk Status
53	Change Disk Status
54	&Unprotect until Eject ...
55	Re&move Protection ...
56	&Write Protect ...
57	&Read/Write Protect ...
58	Change &Password ...
59	Write Protect with &Password ...
60	&Write Protect
61	Disk Protect Options
62	Enter New Password (optional) :
63	Disk
64	Adapter
65	Interface Type:
66	Computer
67	Parallel Port
68	SCSI
69	&Leave Checked
70	Leaving "Verify writes" checked maintains a greater assurance that your data is written correctly.
109	Specify Windows startup actions for selected drive.
110	Suppress explanatory messages.
600	Exit Iomega Tools.
601	Get information about selected drive, disk, etc.
602	Format the disk in selected drive.
603	Choose among disk protect options.
604	Set spin-down time for selected drive.
605	Eject the disk in selected drive.
606	Make disk in selected drive nonremovable.
607	Test selected drive.
608	Get help on Iomega Tools.
610	Make disk in selected drive removable.
611	Select a tool from the toolbar or menu.
612	&Make Nonremovable ...
613	&Make Removable ...
1000	Iomega Tools
1001	Iomega Tools for NT Version 1.53
1003	OK
1004	&Cancel
1005	&Help
1006	Drive sleep in
1007	minutes.
1008	Testing drive ... please wait.
1009	Short Format:
1010	Long Format with Surface Verify:
1011	Make disk bootable (copy system files)
1012	Volume Label:
1013	Estimated time: %s
1014	About Iomega Tools
1015	Copyright 1996 Iomega Corporation
1016	This computer program is protected by copyright law and international treaties.  
1017	Drive Sleep for Drive %c:
1018	Diagnostics for Drive %c:
1019	Format Disk in Drive %c:
1020	Drive Information for Drive %c:
1021	Disk Information for Drive %c:
1022	Adapter Information
1023	Computer System Information
1024	On your OK, the disk in drive %c: will be nonremovable, and will look like a fixed disk to your system.  (Return to removable mode by using same button or menu item.)
1025	On your OK, the disk in drive %c: will be removable.
1026	&Start
1027	Make disk nonremovable .
1028	Unprotect disk temporarily (until eject).
1029	Short Format Disk in Drive %c:
1030	Long Format Disk in Drive %c:
1031	Windows Startup Preferences for Drive %c:
1032	minutes (to conserve energy).
1033	unprotected until eject.
1034	READ/WRITE-PROTECT CAUTION:  If you forget your password, the data on this disk can NEVER be recovered.  The disk can only be reformatted, erasing ALL data.
1035	WRITE-PROTECT CAUTION:  If you forget your password, you will need to copy this disk to another disk before you can change the data.
1036	Supporting %d drives.
1037	No drives on your system supported by Iomega Tools.  Tools program will not run.
1038	Warning:  ALL data on the disk in drive %c: will be lost! 
1039	Formatting disk . . . 
1040	Windows Startup Preferences
1041	Untitled
1042	Drive %c: Diagnostics Passed
1043	Drive %c: Diagnostics failed.  If you are having problems with the drive, call your hardware dealer or see "Contacting Iomega" in Help.
1044	%d Minutes
1045	IRQ %d
1046	No IRQ used
1047	No memory mapping used
1048	No port assigned
1049	No buffer used
1050	Enhanced Mode
1051	Standard Mode
1052	N/A
1053	OK
1054	Marginal, See "Disk Life" in Help
1055	Long Format Recommended
1056	Drive %c: Diagnostics not completed.
1057	Drive %c: first test not successful.  Insert another disk to continue the test.
1058	Format complete.
1059	Disk in drive %c: is write-protected.  Correct and retry command.
1060	Iomega Tools is unable to continue.  Try closing other Iomega utilities, if running, or reboot your computer.
1061	Invalid password.  Format can still be performed on the disk in drive %c:.  All data will be ERASED.  Press Start to continue the format.
1062	Format failed.  Disk in drive %c: is unusable.  Try running Long format on disk.
1063	Invalid password.  Only a long format can be performed on the disk if you have forgotten your password.
1064	Unable to format %s disks in drive %c:
1065	Format failed.  Disk in drive %c: is unusable.
1066	Unable to set protect state.
1067	Not enough memory to issue command.
1068	This format will take approximately %d %s.
1069	Unable to copy system files.
1070	This format may take up to %d %s.
1071	minute(s)
1072	seconds
1073	hour(s)
1074	Windows Exit cancelled because of format in progress.
1075	Completed
1076	byte sectors
1077	Yes
1078	No
1079	No disk present
1080	Unknown
1081	bit FAT
1082	Unable to format the media type in drive %c!
1083	Continue format ?
1084	Compressed
1085	Not enough memory to run Iomega Tools.
1086	Disk in drive %c: is a mounted Stacker volume.  To access the disk through Iomega Tools, first unmount the disk.
1087	Unauthorized reproduction or distribution of this program, or any portion of it, will be prosecuted.
1088	Because WINDOWS is running from the disk in drive %c:, Iomega Tools will NOT format the disk.
1089	Do you really want to format your BOOT disk in drive %c:?
1090	Macintosh Format
1091	NTFS or other IFS
1092	Unable to Eject disk.  Disk may be in use by another process.
1093	"Unable to run Iomega Tools under this version of Windows.  Contact Iomega for Tools upgrade. "
\n
1094	Verify Writes (for extra data protection)
1095	Verify Writes
1096	None
1097	Adapter Params:
1098	Reset Parrallel Port Optimization