[] # set string storage Module_Names = 16 HTML_text = 32 # accept commands on this port Command_Port = 3011 # and message logging on this one (SYSLOG) Log_Port = 514 # accept commands/messages on this port. Command_IPs = admin 127.0.0.1,192.168.1.1,207.174.132.202 # command prefix string for Command_Port, matches constant in sysphmsg.c Command_Pfx = 01434D4402 # don't check the these devices Exclude_dev = AB # take data every 1 sec. Peek_Interval = 10 #Don't use the following 2 features #Proc_Thread = 0 #Unused_Swap = 0 # number of Dos32QuerysysState buffers in ring Max_Buffers = 16 # place to store the module stats, etc. Save_Path = e:\mod32\syspage\syspage.svm Log_Delay = 1 Log_Depth = 120 Log_Display = 23 Log_Console = 1 # switch logs daily Log_Switch = 2 # maintain this many log files Num_Logs = 7 # write them to files that look like this Log_File = f:\syslog\syspg??.log # put them on disk every n log lines Log_Flush = 10 [] LogDisp admin ListF admin e:\emx\bin\ls.exe log Dspace admin e:\emx\bin\df.exe log Dusage admin e:\emx\bin\du.exe log [ 00 r:\os2html\syspipl.htm] %%hostname -- Static Configuration
SysPage -- Static Configuration

This page written at %&currtime %%tz on %&currdate in sub-tropical Southwest Denver, Colorado, USA. This is the IPL page and is written at the start of SysPage, and when the HTML portion of the configuration file is reloaded. Generally, it should contain items which do not vary from program start or reload time.

%%hostname is still an OS/2 system acting as the user interface portion of our home LAN.
This system was booted at %&boottime.

    %%hostname has
  • %&physmemory bytes of memory.
  • floppy disk drives: %&numfloppies
  • printers: %&numprinters
  • serial ports: %&numcomports

Module Report
describes executable usage over multiple SysPage invocations.
System Log
currently lists the last LogDisplay elements of the program execution log.
Active Processes
currently lists the active processes in reverse PID order.
Command Log
allows command entry and output for authorized users.
Documentation
provides SysPage documentation.

Please mail any suggestions and observations to sbsbugs@dashs.denver.co.us
%&partitions
Partition Layout for Fixed Disks
Drive Mode Type Sectors Starting Sector Ending Sector
%&physicaldisk %&mode %&parttype %&sizesect %&startsect %&endsect

%&units
Hard Disk Device Parameters
Drive Cylinders Heads Sectors/Track
%&physicaldrive %&cylinders %&heads %§ors

%&filedir[d:\config.sys] %&Filename last written at %&FileWrtime on %&FileWrdate.
Formatted by SysPage for OS/2 which started at %&inittime on %&initdate. [ 30 r:\os2html\syspprc.htm] %%hostname -- Process Report

SysPage -- Active Processes

This page written at %&currtime %%tz on %&currdate in sub-tropical Southwest Denver, Colorado, USA.

%%hostname has been running for %&uptime hours, minutes, seconds.

This file is should be re-written every %&reload milliseconds.

Please mail any suggestions and observations to sbsbugs@dashs.denver.co.us

Formatted by SysPage for OS/2 which started at %&inittime on %&initdate.
Other Pages
Static Configuration
Module Report
System Log
Command Log
Documentation

There are %&swapremain megabytes of disk space remaining in the swap file, and %&availmemory MB of main memory available. The current CPU load is %&cpuload%.

%&processes
Active Processes
Process ID User CPU System CPU Starting Time Module Name
%&pid %&pusercpu %&psyscpu %&starttime %&pmodname
[ 60 r:\os2html\syspmod.htm] %%hostname -- Module Report

SysPage -- Module Report

This page written at %&currtime %%tz on %&currdate in sub-tropical Southwest Denver, Colorado, USA.
This file is should be re-written every %&reload milliseconds.


System Log
Active Processes
Command Log
Static Configuration
Documentation

%%hostname has been running SysPage for OS/2 since %&inittime on %&initdate.
%&ldevices
Logical Devices
Logical Device State Type Free SpaceVolume LabelFS Name Serial Num
%&smode %&devstate %&stype %&freespace %&volume %&devfsdname %&volser


The following table describes the executables in use on the system and their relative usage of CPU resource and the total elapsed time of their use. You should note that elapsed times for some modules exceed SysPage's run time. This may be accounted-for by multiple invocations of the module active at the same time, and that data displayed in this table is cumulative since the creation of the file described by the configuration string Save_Path.

%&modules
Module Usage
Module Name User CPU System CPU Elapsed Time Invocations
%&modname %&totusercpu %&totsyscpu %&totelapsed %&invocations
[ 20 r:\os2html\sysplog.htm] %%hostname -- Log Report

SysPage -- System Log

This page written at %&currtime %%tz on %&currdate in sub-tropical Southwest Denver, Colorado, USA.


Module Report
Active Processes
Static Configuration
Command Log
Documentation
%&logtable
System Log
Time Stamp Event Process Elapsed Time User CPU Module
%×tamp %&logevent %&logpid %&logelapsed %&logucpu %&logmodname

SysPage Control for Authorized Users


Log Display Length Selection

  • 23 lines.
  • 40 lines.
  • 60 lines.
  • 100 lines.

    • [ 00 r:\os2html\sysaux1.htm] %%hostname -- Command Log Report
    SysPage -- Command Log and Entry

    This page written at %&currtime %%tz on %&currdate in sub-tropical Southwest Denver, Colorado, USA.

    Command Entry for Authorized Users

    Parameters:

    Command:

    Command Log

    PID and Command Output 

    %&commandout %&commandpid  %&commandtext

    Module Report
    Active Processes
    Static Configuration
    System Log
    Documentation