Lexmark Color Jetprinter WIN-OS2 README file ----------------------------------------------------------------------------------------------------------------------- This file contains information not included in the Quick Setup sheet or in the Online Guide. Tips for using the Lexmark ColorFine driver for Windows in Win-OS/2 For best results, set up Windows printing as follows: 1 Open WIN-OS/2 full screen. 2. Install Lexmark ColorFine driver for Windows as directed by Setup Guide shipped with your printer. 3. Open WIN-OS/2 Main. 4. Open Control Panel. 5. Open Printers. 6. Select the Lexmark ColorFine driver from the "Installed Printers" list. 7. Select "Connect...". 8. Select LPT1.OS2 if your printer is attached to LPT1, LPT2.OS2 if attatched to LPT2, or LPT3.OS2 if attached to LPT3. 9. Select OK. 10. Select "Set As Default Printer". 11. Select "Close". After the Windows driver is installed, install and align cartridges from the OS/2 driver. Make sure that two cartridges are installed. Do all subsequent cartridge installation and alignment from the OS/2 driver. The Windows driver will be updated automatically. Exiting your Win-OS/2 session Wait for all print jobs sent to the printer to complete printing or cancel each job in the ColorFine Spool Manager before exiting your Windows session. If you attempt to exit Windows and your system does not respond, close the session from the Task menu. Performance improvements If you experience long delays in printing with some Windows applications, try choosing a lower DPMI value in your Win-OS/2 session settings. ----------------------------------------------------------------------------------------------------------------------- Lexmark , ColorFine and Color Jetprinter are trademarks or registered trademarks of Lexmark International, Inc. Windows is a registered trademark of Microsoft in the U.S. and other countries. OS/2 is a registered trademark of IBM in the U.S. and other countries. Other trademarks are the property of their respective owners.