comp.os.os2.networking.misc (Usenet) Saturday, 23-Oct-1999 to Friday, 29-Oct-1999 +----------------------------------------------------------------------------+ From: kidzncatz@snip.net 22-Oct-99 13:40:11 To: All 23-Oct-99 04:42:01 Subj: Unable To Copy EXE Files Over Home Network From: "Charles E. Gibson" Hi all: Have 2 systems linked via a crossover cable. When I try and copy an exe or com file from one to the other it will only create a shortcut. It will not copy the actual file from one system to the other. Check to make sure file and print sharing was on on both machines as well as hard drive sharing. All is well there. I can copy text files fine!! Thanx, Chas --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: WordPro Word Processing/System Setup and Training (1:109/42) +----------------------------------------------------------------------------+ From: thannymeister@spambegone.yahoo.com 22-Oct-99 17:06:12 To: All 23-Oct-99 04:42:02 Subj: How to configure routing for two TCP/IP interfaces From: "Mike Ruskai" I'm attempting to play around with a small token ring network, for purposes of comparison with ethernet (16/4 token ring, and 10BaseT ethernet). To keep the rest of the network functional, what I'd like to do is use the token ring connection only for TCP/IP, between what are currently two machines (a third will be added later), both running Warp 4. The two machines in question are this one, and a server machine, which is configured as a gateway for Internet access, currently using Dial-on-Demand modem access (no cable modem or DSL available here, unfortunately). Over ethernet, the server is 172.20.0.20, and this machine is 172.20.0.22. What I tried was making the server 172.20.0.30, and this machine 172.20.0.32, on the token ring interface. What I need to know is what I need to put in the way of routing to make sure that packets destined for the two token ring addresses, from the two machines, go over the token ring connection (as opposed to being routed over the ethernet connection, which defeats the entire experiment). I'd appreciate any information on this. - Mike Remove 'spambegone' to send e-mail. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: TLF (1:109/42) +----------------------------------------------------------------------------+ From: thannymeister@spambegone.yahoo.com 22-Oct-99 17:13:12 To: All 23-Oct-99 04:42:02 Subj: Re: Cable Modem firewall From: "Mike Ruskai" On Mon, 11 Oct 1999 14:16:40 -0500, Wayne Lemmon wrote: >I have warp 4 and would like to use it as a firewall-fileserver on my >home network. I will be running on a 225 MHz pent, with 128 megs. I >tried to use redhat but with all the re-compiles and such, I never got >it working and it didn't like my Jazz-Jet pci scsi card. Is there a >page on the internet that discribes how to do this? What upgrades and >fix packs do I need? etc..... I used to use a product from InJoy for just that (until I moved out of the cable modem service area). It does IP masquerading, and the performance was very good. There's also apparently another similar product around that does the same thing. The former product will work either with two NIC's in the gateway machine, or with one NIC, and the cable modem plugged into the expansion port of the hub. - Mike Remove 'spambegone' to send e-mail. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: TLF (1:109/42) +----------------------------------------------------------------------------+ From: thannymeister@spambegone.yahoo.com 22-Oct-99 17:15:18 To: All 23-Oct-99 04:42:02 Subj: Re: Warp 4.5 modem sharing possible? From: "Mike Ruskai" On Sun, 17 Oct 1999 21:50:43 +0100, Robert Laurence wrote: >I would like to ask whether Warp server 4.5 supports modem sharing. Sure. Just share a com port. - Mike Remove 'spambegone' to send e-mail. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: TLF (1:109/42) +----------------------------------------------------------------------------+ From: merlins@ibm.net 22-Oct-99 21:15:11 To: All 23-Oct-99 04:42:02 Subj: Re: Unable To Copy EXE Files Over Home Network From: Meinolf Sondermann Hi Charles, as you're using Win98 your question might be misplaced in a OS/2 newsgroup. Probably the only answer you get here will be "Use OS/2" or the like. I suggest asking again in an appropiate windows group. Bye/2 Meinolf "Charles E. Gibson" wrote: > > Hi all: > Have 2 systems linked via a crossover cable. When I try and copy an exe > or com file from one to the other it will only create a shortcut. It > will not copy the actual file from one system to the other. Check to > make sure file and print sharing was on on both machines as well as hard > drive sharing. All is well there. I can copy text files fine!! > > Thanx, > Chas --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: cstumpf@monmouth.com 22-Oct-99 22:21:20 To: All 23-Oct-99 04:42:02 Subj: Re: How to configure routing for two TCP/IP interfaces From: "Chris Stumpf" You have a problem here. You have two networks , but the addresses that you are using are all on the same network. What you need to do is use 172.20.1.x for your token ring network. Then, on the machine doing the routing, enable IP forwarding in the TCP/IP settings and make the default route point to the token ring card's ip address, if you use the TCP/IP settings notebook, it will create a net route automatically when you create the default route. Then on all the other machines on your network, make a default route to the ethernet IP address of the routing machine and you will be set. Oh, don't forget to add the domain and dns from your isp to all the machines. It's not very difficult. On Fri, 22 Oct 1999 17:06:25 -0400 (EDT), Mike Ruskai wrote: --snip-- :> :>Over ethernet, the server is 172.20.0.20, and this machine is 172.20.0.22. :> :>What I tried was making the server 172.20.0.30, and this machine :>172.20.0.32, on the token ring interface. :> --snip-- Chris Stumpf C.S.E. Computer Services Computer Consultant (OS/2, Lan, Wan, CTI) Serenity Systems Channel Partner IBM Certified Systems Expert - OS/2 Warp 4 web: http://cse.anterras.net email: cse@anterras.net phone: (732)918-2480 --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Monmouth Internet (1:109/42) +----------------------------------------------------------------------------+ From: lsunley@mb.sympatico.ca 23-Oct-99 04:41:22 To: All 23-Oct-99 04:42:02 Subj: Re: Unable To Copy EXE Files Over Home Network From: lsunley@mb.sympatico.ca (Lorne Sunley) On Fri, 22 Oct 1999 17:40:23, "Charles E. Gibson" wrote: > Hi all: > Have 2 systems linked via a crossover cable. When I try and copy an exe > or com file from one to the other it will only create a shortcut. It > will not copy the actual file from one system to the other. Check to > make sure file and print sharing was on on both machines as well as hard > drive sharing. All is well there. I can copy text files fine!! > Try opening up a "Command Prompt" or "MS-DOS window" and use the COPY command. AFAIK the regular DOS commands are still present in Windows 98 (use of Win 98 is assumed from the fact you are posting from a Windows 98 machine). Lorne Sunley --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: MBnet Networking Inc. (1:109/42) +----------------------------------------------------------------------------+ From: lsunley@mb.sympatico.ca 23-Oct-99 04:45:08 To: All 23-Oct-99 04:42:02 Subj: Re: Peer networking and Win-OS2 From: lsunley@mb.sympatico.ca (Lorne Sunley) On Fri, 22 Oct 1999 23:53:26, wrote: > I have three machines running both Win98 and Warp4 and they are working fine > in a Peer network environment, i.e. any of the three can be running Win98 or > Warp4 and I can share the drives and the printers in any configuration I > want. That`s great. However, if I run Win-os2 on one of the machines, the > network connection ceases on that machine and the only way to get it back is > to reboot that machine. > Any suggestion as to how to solve that problem? > Dumb question, but, did you set up any kind of networking in WINOS2? You should not have any network software set up in WINOS2 as the drive and printer shares appear as a local device or disk drive. Lorne Sunley --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: MBnet Networking Inc. (1:109/42) +----------------------------------------------------------------------------+ From: nineveh@wwa.com 23-Oct-99 08:17:00 To: All 23-Oct-99 10:32:22 Subj: Re: Unable To Copy EXE Files Over Home Network From: nineveh@wwa.com In <3810A187.6B11604E@snip.net>, "Charles E. Gibson" writes: >Have 2 systems linked via a crossover cable. When I try and copy an exe >or com file from one to the other it will only create a shortcut. It >will not copy the actual file from one system to the other. Check to >make sure file and print sharing was on on both machines as well as hard >drive sharing. All is well there. I can copy text files fine!! > >Thanx, >Chas This is an OS/2 newsgroup, but I will answer anyway. Drag the file with the right mouse button and then select copy from the menu that pops up. Another is to hold Ctrl while dragging with the left button. Good luck. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Verio (1:109/42) +----------------------------------------------------------------------------+ From: thannymeister@spambegone.yahoo.com 23-Oct-99 09:31:13 To: All 23-Oct-99 14:34:06 Subj: Re: How to configure routing for two TCP/IP interfaces From: "Mike Ruskai" On Fri, 22 Oct 1999 22:21:41 -0400 (EDT), Chris Stumpf wrote: >You have a problem here. You have two networks , but the addresses that you >are using are all on the same network. What you need to do is use 172.20.1.x >for your token ring network. Then, on the machine doing the routing, enable >IP forwarding in the TCP/IP settings and make the default route point to the >token ring card's ip address, if you use the TCP/IP settings notebook, it >will create a net route automatically when you create the default route. >Then on all the other machines on your network, make a default route to the >ethernet IP address of the routing machine and you will be set. Oh, don't >forget to add the domain and dns from your isp to all the machines. It's not >very difficult. One of the things I've learned about computers is that difficulty is always relative. I tried doing what I thought you were saying about, and it didn't work out very well at all. If you wouldn't mind spending a bit more time on my problem, here's what I have: Server - OS/2 Warp 4 Client 1 - OS/2 Warp 4 & Win95 Client 2 - Win95 Server: 10BaseT (TCP/IP, NetBIOS) Modem (Dial-up TCP/IP) Token Ring (TCP/IP) Client 1: 10BaseT (TCP/IP, NetBIOS) Token Ring (TCP/IP) Client 2: 10BaseT (TCP/IP, NetBIOS) From what you've said so far, I changed the token ring IP addresses for the server and first client to 172.20.1.20 and 172.20.1.22, respectively, whereas the ethernet IP addresses are 172.20.0.20 and 172.20.0.22, respectively. Currently, there are no routing table entries on the server machine, save for whatever InJoy puts in for the dial-up Internet connection. The first client has a default route pointing to 172.20.0.20, and a net route (for 172.20), pointing to the same IP. The second client just has 172.20.0.20 configured as the "gateway", and won't be using token ring anytime soon. I also won't lose any sleep over not having the routing working under Win95 on the first client. I don't know nearly as much about TCP/IP as I'd like, but isn't 172.20.0.20 a class B address? Doesn't that mean that changing the net would require changing the second octet? Either way, I'm still not sure what sort of routing I need. - Mike Remove 'spambegone' to send e-mail. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: TLF (1:109/42) +----------------------------------------------------------------------------+ From: asuri@vpub.powernet.co.uk 22-Oct-99 14:40:10 To: All 23-Oct-99 14:34:07 Subj: Re: How to configure routing for two TCP/IP interfaces From: Adrian Suri This is a multi-part message in MIME format. --------------895E5F10401E9DB2CD1571D3 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi on a similar question, I have two machines links via ethernet, IP address 192.168.1.1 (my machines linked to the internet via modem 192.168.1.2 (my son's machine) I have been trying to get my son's machine to be able to see the net without luck question 1) do you need a program such as Ilink? or can OS/2 do it by itself, I get the impression not, the program only needs registering if you are using more than two machines? I know I have a tcpip config prob, wget keeps complaining wget: Warning: cannot determine local IP address. when on line and pinging my son's machine netstat reprts the following epm: D:\ >netstat -ar destination router netmask metric flags intrf default 195.60.0.1 0.0.0.0 0 UGP ppp0 127.0.0.1 127.0.0.1 255.255.255.255 0 UH lo 128.123.3.50 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 192.9.48.9 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 192.9.49.30 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 192.9.49.33 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 192.18.97.124 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 192.18.97.130 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 192.18.99.131 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 192.160.1 192.168.1 225.225.225.0 1 UGSP lan0 192.168.1 192.168.1.1 255.255.255.0 0 UC lan0 194.229.131.121 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 195.54.80.70 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 195.60.0.1 195.60.0.1 255.255.255.255 0 UGHW ppp0 195.60.1.155 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 195.60.6 195.60.6.10 255.255.255.0 0 UP ppp0 195.60.6.10 127.0.0.1 255.255.255.255 0 UH lo 195.60.31.2 195.60.0.1 255.255.255.255 0 UGHW ppp0 195.60.31.17 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 195.64.32.23 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 195.64.48.23 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 199.72.95.11 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 205.218.216.10 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 206.25.203.6 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 206.132.180.16 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 207.200.75.204 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 207.200.75.206 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 209.1.224.187 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 212.206.127.198 195.60.0.1 255.255.255.255 0 UGHW ppp0 216.32.244.63 195.60.0.1 255.255.255.255 0 UGHW3 ppp0 addr 127.0.0.1 Interface 9 mask 0xe1e1e100 broadcast 127.0.0.1 Multicast addrs: 224.0.0.1 addr 192.168.1.1 Interface 0 mask 0xffffff00 broadcast 192.168.1.255 Multicast addrs: 224.0.0.1 addr 195.60.6.10 Interface 10 mask 0xffffff00 broadcast 195.60.0.1 Multicast addrs: 224.0.0.1 Mike Ruskai wrote: > On Fri, 22 Oct 1999 22:21:41 -0400 (EDT), Chris Stumpf wrote: > > >You have a problem here. You have two networks , but the addresses that you > >are using are all on the same network. What you need to do is use 172.20.1.x > >for your token ring network. Then, on the machine doing the routing, enable > >IP forwarding in the TCP/IP settings and make the default route point to the > >token ring card's ip address, if you use the TCP/IP settings notebook, it > >will create a net route automatically when you create the default route. > >Then on all the other machines on your network, make a default route to the > >ethernet IP address of the routing machine and you will be set. Oh, don't > >forget to add the domain and dns from your isp to all the machines. It's not > >very difficult. > > One of the things I've learned about computers is that difficulty is > always relative. > > I tried doing what I thought you were saying about, and it didn't work out > very well at all. > > If you wouldn't mind spending a bit more time on my problem, here's what I > have: > > Server - OS/2 Warp 4 > Client 1 - OS/2 Warp 4 & Win95 > Client 2 - Win95 > > Server: > > 10BaseT (TCP/IP, NetBIOS) > Modem (Dial-up TCP/IP) > Token Ring (TCP/IP) > > Client 1: > > 10BaseT (TCP/IP, NetBIOS) > Token Ring (TCP/IP) > > Client 2: > > 10BaseT (TCP/IP, NetBIOS) > > From what you've said so far, I changed the token ring IP addresses for > the server and first client to 172.20.1.20 and 172.20.1.22, respectively, > whereas the ethernet IP addresses are 172.20.0.20 and 172.20.0.22, > respectively. > > Currently, there are no routing table entries on the server machine, save > for whatever InJoy puts in for the dial-up Internet connection. > > The first client has a default route pointing to 172.20.0.20, and a net > route (for 172.20), pointing to the same IP. The second client just has > 172.20.0.20 configured as the "gateway", and won't be using token ring > anytime soon. I also won't lose any sleep over not having the routing > working under Win95 on the first client. > > I don't know nearly as much about TCP/IP as I'd like, but isn't > 172.20.0.20 a class B address? Doesn't that mean that changing the net > would require changing the second octet? > > Either way, I'm still not sure what sort of routing I need. > > - Mike > > Remove 'spambegone' to send e-mail. -- asuri@vpub.powernet.co.uk http://users.powernet.co.uk/vpub -----BEGIN PGP PUBLIC KEY BLOCK----- Version: 2.6.2i mQBtAzfIYMAAAAEDAMV0uyy3X0ndMt1H0xPl4BJOJYYj08HlybF6KcHFXCSc34j4 l8mp4xzOfm8WoBO97d7aiPXVykTTAXLLomha/oESJXY1B9BPmpyn0597VnulZFoq FpBVrjpbCywOabioRQAFEbQmQWRyaWFuIFN1cmk8YXN1cmlAdnB1Yi5wb3dlcm5l dC5jby51az4= =hcQ/ -----END PGP PUBLIC KEY BLOCK----- --------------895E5F10401E9DB2CD1571D3 Content-Type: text/x-vcard; charset=us-ascii; name="asuri.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Adrian Suri Content-Disposition: attachment; filename="asuri.vcf" begin:vcard n:Suri;Adrian tel;home:0121 2497283 x-mozilla-html:FALSE org:Virtual Publications adr:;;;;;; version:2.1 email;internet:asuri@vpub.powernet.co.uk fn:Adrian end:vcard --------------895E5F10401E9DB2CD1571D3-- --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Virtual Publications (1:109/42) +----------------------------------------------------------------------------+ From: thannymeister@spambegone.yahoo.com 23-Oct-99 16:45:25 To: All 23-Oct-99 19:54:21 Subj: Re: How to configure routing for two TCP/IP interfaces From: "Mike Ruskai" On Fri, 22 Oct 1999 14:40:21 +0100, Adrian Suri wrote: >Hi on a similar question, > >I have two machines links via ethernet, IP address > >192.168.1.1 (my machines linked to the internet via modem >192.168.1.2 (my son's machine) > >I have been trying to get my son's machine to be able to see the net without luck > >question 1) do you need a program such as Ilink? or can OS/2 do it by itself, I >get the impression not, the program only needs registering if you are using more >than two machines? Since you only have one valid IP address (the one assigned at dialup), you can't simply use what OS/2 has built-in. You need a gateway of some sort, of which there are a few to choose from. For almost unlimited functionality, you'll want an IP masquerader. When I had my cable modem, I used InJoy's gateway program. Now that I'm currently relegated to using a modem, I use InJoy with its IP masquerading abilities (you'll need to register at a non-basic level). [snip] The rest looks like a big mess. The only address your son's machine should have is 192.168.1.2. The routing table for it should look something like this: destination router netmask refcnt use flags snmp intrf metric default 198.168.1.1 0.0.0.0 3 792 UG 0 lan0 127.0.0.1 127.0.0.1 255.255.255.255 0 0 UH 0 lo 198.168.1.0 198.168.1.2 255.255.255.0 0 0 U 0 lan0 198.168.1.1 198.168.1.2 255.255.255.255 7 6 UH 0 lan0 In the TCP/IP settings notebook, you can get the correct routing by clicking on Add, pressing D for Default in the type box, and plugging in your machine's address (with a metric of 1, and subnet mask of 255.255.255.0). For that to work, of course, you will need an IP masquerader like InJoy (which is the only dial-up masquerader I know of). You could get limited functionality by running a proxy program like IGate, but I've found performance with that route to be lacking. You could get better, but still limited functionality by using a SOCKS server, such as SOCKS5, available free from Sun (a reference version). If you do that, just configure your son's machine to use a SOCKS server, on the SOCKS page of the TCP/IP settings notebook. - Mike Remove 'spambegone' to send e-mail. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: TLF (1:109/42) +----------------------------------------------------------------------------+ From: soren@webresumes.cx 24-Oct-99 09:18:21 To: All 24-Oct-99 16:44:17 Subj: Surevey: Linux VS. Windows NT VS. NetWare From: "Soren" Hi, My name is Soren Winslow. I am a student at Heald College. In my basic networking class I have been asked to conduct the following Poll. If you are a networking guru, geek or professional, would you please answer the following survey. Thank You, Soren. soren@webresumes.cx ___________________________________________________________________ Which Network Operating System do you prefer? A- Linux B- Windows NT C- NetWare 2- Rank the reasons (1-5) why you chose the OS you picked in question #1. Compatibility Cost Security Stability The logo 3- How did you learn about the OS you picked in question #1. A- School B- Self-Study C- Work 4- Rank (1-3) which OS you believe is most stable. Linux Windows NT NetWare 5- Rank (1-3) which OS you believe is easiest to install. Linux Windows NT NetWare 6- Rank (1-3) which OS you believe has the best security features. Linux Windows NT NetWare 7- Rank (1-3) which OS you believe is easiest to use. Linux Windows NT NetWare 8- What is your occupation? 9- What is your age? 10- What is your education? A- High School B- Some College C- College Graduate --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: EarthLink Network, Inc. (1:109/42) +----------------------------------------------------------------------------+ From: c.k.christacopoulos.REMOVEME@dun... 24-Oct-99 20:28:13 To: soren@webresumes.cx 24-Oct-99 16:44:17 Subj: Re: Surevey: Linux VS. Windows NT VS. NetWare Message sender: c.k.christacopoulos.REMOVEME@dundee.ac.uk To: soren@webresumes.cx From: Charles Christacopoulos Soren wrote: > > Hi, My name is Soren Winslow. I am a student at Heald College. In my basic > networking class I have been asked to conduct the following Poll. If you are > a networking guru, geek or professional, would you please answer the > following survey. Thank You, Soren. soren@webresumes.cx > > ___________________________________________________________________ > Which Network Operating System do you prefer? > A- Linux > B- Windows NT > C- NetWare :-) You ask an os/2 group, what do you think we use? Best of luck with your survey. Charles ;-) Remove REMOVE_ME to reply. ------------------------------------------------------------------- Charles Christacopoulos, Secretary's Office, University of Dundee, Dundee DD1 4HN, (Scotland) United Kingdom. Tel: +44+(0)1382-344891. Fax: +44+(0)1382-201604. http://somis.ais.dundee.ac.uk/ (runs on OS/2) Scottish Search Maestro http://somis2.ais.dundee.ac.uk/ (runs on OS/2 too) --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: University of Dundee (1:109/42) +----------------------------------------------------------------------------+ From: m.karsch@ath.nl 25-Oct-99 11:00:18 To: All 25-Oct-99 10:31:28 Subj: Re: How do I read and write ethernet packets? From: Michiel Karsch Try to find documentation on acslan (dll in ibmcom/dll) here you have access at LLC level (802.2) It is documented but i don't rember where. Michiel Niclas Lindstr”m wrote: > Niclas Lindstr”m wrote: > > > > Are there any API's in OS/2 that can be used to read and > > write ethernet frames directly from/to the lan-adapter so > > I can analyze the ethernet header, modify it and send it > > back out on the ethernet again..? > > > > Ok, I believe I will have to write my own intermediate > NDIS-driver. Does anyone know were I can find good source > samples for NDIS drivers. I just downloaded the DDK from > IBM and at the first look at the sample in there (a token > ring driver) it looks too complex. I guess it includes > hardware access and things like that, but my driver only > need to access the existing NDIS driver and act as any > NDIS driver towards the application (TCP/IP-stack)... > > Regards > Niclas Lindstr”m --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: WorldOnline News server (1:109/42) +----------------------------------------------------------------------------+ From: rdohrenburg@hotmail.com 25-Oct-99 04:12:04 To: All 25-Oct-99 10:31:28 Subj: Re: Surevey: Linux VS. Windows NT VS. NetWare From: Robert Dohrenburg Soren wrote: > > Hi, My name is Soren Winslow. I am a student at Heald College. In my basic > networking class I have been asked to conduct the following Poll. If you are > a networking guru, geek or professional, would you please answer the > following survey. Thank You, Soren. soren@webresumes.cx > > ___________________________________________________________________ > Which Network Operating System do you prefer? > A- Linux > B- Windows NT > C- NetWare > > 2- Rank the reasons (1-5) why you chose the OS you picked in question #1. > Compatibility > Cost > Security > Stability > The logo > > 3- How did you learn about the OS you picked in question #1. > A- School > B- Self-Study > C- Work > > 4- Rank (1-3) which OS you believe is most stable. > Linux > Windows NT > NetWare > > 5- Rank (1-3) which OS you believe is easiest to install. > Linux > Windows NT > NetWare > > 6- Rank (1-3) which OS you believe has the best security features. > Linux > Windows NT > NetWare > > 7- Rank (1-3) which OS you believe is easiest to use. > Linux > Windows NT > NetWare > > 8- What is your occupation? > > 9- What is your age? > > 10- What is your education? > A- High School > B- Some College > C- College Graduate 11- What is the pollster's IQ? A- 10 B- 20 C- 20/20 D- Can you repeat the question? --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: EarthLink Network, Inc. (1:109/42) +----------------------------------------------------------------------------+ From: christoph.huber@rzb-wien.raiffei... 25-Oct-99 12:43:15 To: All 25-Oct-99 10:31:28 Subj: ATM Network Cards Message sender: christoph.huber@rzb-wien.raiffeisen.at From: Christoph Huber Hello, has anybody experiences with ATM Network card. I am seaching some fibreoptic 155 or 622 Mbs Cards with OS/2 (WS SMP and WSeB) support. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Netway AG (1:109/42) +----------------------------------------------------------------------------+ From: Unknown 25-Oct-99 17:33:15 To: All 25-Oct-99 16:44:04 Subj: Consistent DOSCALL1.DLL Crashes From: Magnus Olsson <> Hi all! I'm facing a very difficult problem. As you can see i have to use the BeOS to post this cry for help. Whenever I try to dial the internet i get a crashed dialer due to an access violation as follows: 10-24-1999 12:27:23 SYS3175 PID 0027 TID 0002 Slot 0045 E:\TCPIP\BIN\SLIPPM.EXE c0000005 1bf91d36 P1=00000000 P2=ffffffff P3=XXXXXXXX P4=XXXXXXXX EAX=00c1ec40 EBX=00001000 ECX=00000000 EDX=00c30000 ESI=00c30000 EDI=0000000d DS=0053 DSACC=d0f3 DSLIM=1fffffff ES=0053 ESACC=d0f3 ESLIM=1fffffff FS=150b FSACC=00f3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=005b:1bf91d36 CSACC=d0df CSLIM=1fffffff SS:ESP=0053:00c1ec24 SSACC=d0f3 SSLIM=1fffffff EBP=00c1ec44 FLG=00002206 DOSCALL1.DLL 0002:00001d36 The same happens with the IBM internet dialer, Communicator, Navigator and ProNews too... I've had some "odd" problems with fp12, so i tried to backout to fp8, but no luck:-( I use the internet a lot, and recently i've used it daily for international communication with my girl-friend, so I'm in deep deep trouble!!! Please help me if you can I'll be eternally grateful (no exaggeration!) -- Using the BeOS makes you appreciate OS/2 even more:-) --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: thannymeister@spambegone.yahoo.com 25-Oct-99 14:40:24 To: All 25-Oct-99 16:44:04 Subj: Excessive ethernet collisions From: "Mike Ruskai" I recently installed a token ring network alongside my existing ethernet network, and while doing a performance comparison, I discovered something odd. The token ring performance averaged around 800KB/sec. The ethernet performance was doing around 20KB/sec, and the hub's packet and collision lights were lighting up, one after the other, in regular rhythm. I've disabled the token ring interface on both computers (only two have token ring cards in them), and the problem persists (from each machine). This machine is using a 3COM 3C905B-TX 10/100 card, and the server machine is using a 3COM 3C590 card. Both are using a 10BaseT connection via a 3COM OfficeConnect 8-port hub. The two token ring cards are 3COM 3C619C's. The problem with ethernet is evident only over TCP/IP, apparently. Using NetBIOS to transfer the same file (rather than FTP) shows no major problems (there are spells of no packet activity, but no abnormal collisions), with an average transfer rate of about 715KB/sec. I've used both OS/2's FTP client, and two clients I've written (one in REXX, one in C++). The latter two use 10KB buffers, with the REXX one having an option to use a different size. If I change the buffer size to 512 bytes, the transfer is greatly improved (though still problematic in the same fashion, with just more transfer between bright collision lights). The dropoff point seems to be around 1500-byte buffers. This very connection has been used in the past with no such problems, so I'm suspicious of the token ring cards, but can't verify their culpability without yanking them out. Is this ringing bells in anyone's head, who can tell me where the problem is without my having to do surgery? - Mike Remove 'spambegone' to send e-mail. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: TLF (1:109/42) +----------------------------------------------------------------------------+ From: kdsnodgrass@earthlink.net 25-Oct-99 21:01:19 To: All 25-Oct-99 19:06:15 Subj: Re: Surevey: Linux VS. Windows NT VS. NetWare From: "Kevin D. Snodgrass" Robert Dohrenburg wrote: > > Soren wrote: > > > > Hi, My name is Soren Winslow. I am a student at Heald College. In my basic > 11- What is the pollster's IQ? > A- 10 > B- 20 > C- 20/20 > D- Can you repeat the question? I did a little checking and Mr. Winslow is listed as the POC for webresumes.cx. Makes me wonder if he isn't trolling... -- Kevin D. Snodgrass I no longer use earthlink.net, replace with home.com or yahoo.com. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: There is no organization here, only chaos. (1:109/42) +----------------------------------------------------------------------------+ From: spam_free_norrisg@linkline.com 25-Oct-99 21:05:14 To: All 26-Oct-99 05:14:19 Subj: Re: Consistent DOSCALL1.DLL Crashes From: "Graham C. Norris" I don't see that you have any choice other than to either restore to your previous system backup or work at getting FP12 on properly as you've apparently got a bitsa system at the moment. What happened with the FP12 install? Graham. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42) +----------------------------------------------------------------------------+ From: nospam@nothing.com 26-Oct-99 10:30:22 To: All 26-Oct-99 14:37:12 Subj: Re: Deep trouble From: nospam@nothing.com No more help needed. It turns out that my resolv file had an allocation error, it's now been corrected by CHKDSK! I could thank myself, but i think i thank God too, that's pretty much everyone:-) - Magnus Olsson "Nothing in the affairs of men is worthy of great anxiety." - Plato --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Utfors AB (1:109/42) +----------------------------------------------------------------------------+ From: rdoetjes@synapses-it.com 26-Oct-99 15:13:29 To: soren@webresumes.cx 26-Oct-99 14:37:12 Subj: Re: Surevey: Linux VS. Windows NT VS. NetWare To: Soren , soren@webresumes.cx From: Raymond Doetjes Soren wrote: > Hi, My name is Soren Winslow. I am a student at Heald College. In my basic > networking class I have been asked to conduct the following Poll. If you are > a networking guru, geek or professional, would you please answer the > following survey. Thank You, Soren. soren@webresumes.cx > > ___________________________________________________________________ > Which Network Operating System do you prefer? > A- Linux > B- Windows NT > C- NetWare > --> Linux > > 2- Rank the reasons (1-5) why you chose the OS you picked in question #1. > Compatibility > Cost > Security > Stability > The logo > --> 4,2,1,3,1 > > 3- How did you learn about the OS you picked in question #1. > A- School > B- Self-Study > C- Work > --> C > > 4- Rank (1-3) which OS you believe is most stable. > Linux > Windows NT > NetWare > --> 1,3,2 > > 5- Rank (1-3) which OS you believe is easiest to install. > Linux > Windows NT > NetWare > -->2,1,3 > > 6- Rank (1-3) which OS you believe has the best security features. > Linux > Windows NT > NetWare > --> 3,1,2 > > 7- Rank (1-3) which OS you believe is easiest to use. > Linux > Windows NT > NetWare > --> 2,1,3 > > 8- What is your occupation? > --> Software developer and Network manager > > 9- What is your age? > --26 > > 10- What is your education? > A- High School > B- Some College > C- College Graduate --> C -- "The Tuxomatic 2200(TM) with patented Gates-Be-Gone(TM) gets rid of blue screens in a flash! It forks! It blits! Look at those fantastic pixels! It surfs the web! You could even host an ISP with it!" Unix: the solution to the W2K problem --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: SYNAPSES IT (1:109/42) +----------------------------------------------------------------------------+ From: t_am@gmx.de 26-Oct-99 19:48:12 To: All 26-Oct-99 20:25:02 Subj: Re: VPN solutions for OS/2 From: t_am@gmx.de (Timo Maier) Hi Paul Dhuse! >Does anyone know of any VPN solutions for OS/2? I'd like to try to It comes with tcp/ip 4.1 IIRC. TAM -- OS/2 Warp4, Ducati 750SS '92 http://www.privat.toplink.de/homepages/thunder Remove "_" for eMail reply --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Freiburg/Germany (1:109/42) +----------------------------------------------------------------------------+ From: wgooster@cs.vu.nl 26-Oct-99 19:36:28 To: All 26-Oct-99 20:25:02 Subj: Re: Surevey: Linux VS. Windows NT VS. NetWare From: "W.G. Oosterveld" In comp.os.misc Soren wrote: : Hi, My name is Soren Winslow. I am a student at Heald College. In my basic : networking class I have been asked to conduct the following Poll. If you are : a networking guru, geek or professional, would you please answer the : following survey. Thank You, Soren. soren@webresumes.cx : ___________________________________________________________________ : Which Network Operating System do you prefer? : A- Linux : B- Windows NT : C- NetWare A : 2- Rank the reasons (1-5) why you chose the OS you picked in question #1. : Compatibility 3 : Cost 4 : Security 2 : Stability 1 : The logo 5 : 3- How did you learn about the OS you picked in question #1. : A- School : B- Self-Study : C- Work B : 4- Rank (1-3) which OS you believe is most stable. : Linux 1 : Windows NT 3 : NetWare 2 : 5- Rank (1-3) which OS you believe is easiest to install. : Linux 1 : Windows NT 2 : NetWare 3 : 6- Rank (1-3) which OS you believe has the best security features. : Linux 1 : Windows NT 3 : NetWare 2 : 7- Rank (1-3) which OS you believe is easiest to use. : Linux 3 : Windows NT 1 : NetWare 2 : 8- What is your occupation? Student in Computer Science, IT Consultant : 9- What is your age? 20 : 10- What is your education? : A- High School : B- Some College : C- College Graduate B --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Fac. Wiskunde & Informatica, VU, Amsterdam (1:109/42) +----------------------------------------------------------------------------+ From: spike1@news.freenet.co.uk 24-Oct-99 17:40:24 To: All 26-Oct-99 21:24:09 Subj: Re: Surevey: Linux VS. Windows NT VS. NetWare From: Spike In the sacred domain of comp.os.linux.misc, Soren babbled thusly: > Hi, My name is Soren Winslow. I am a student at Heald College. In my basic > networking class I have been asked to conduct the following Poll. If you are > a networking guru, geek or professional, would you please answer the > following survey. Thank You, Soren. soren@webresumes.cx > ___________________________________________________________________ > Which Network Operating System do you prefer? > A- Linux > B- Windows NT > C- NetWare A > 2- Rank the reasons (1-5) why you chose the OS you picked in question #1. > Compatibility 3 > Cost 2 > Security 4 > Stability 1 > The logo ???? 5 > 3- How did you learn about the OS you picked in question #1. > A- School (University, actually) > B- Self-Study > C- Work > 4- Rank (1-3) which OS you believe is most stable. > Linux 1 > Windows NT 3 > NetWare No idea. Never used it... > 5- Rank (1-3) which OS you believe is easiest to install. > Linux 1 > Windows NT 3 > NetWare Again... No idea... > 6- Rank (1-3) which OS you believe has the best security features. > Linux 1 > Windows NT 3 > NetWare See above > 7- Rank (1-3) which OS you believe is easiest to use. > Linux 1 > Windows NT 3 > NetWare See above! > 8- What is your occupation? Unemployed > 9- What is your age? 32 > 10- What is your education? > A- High School > B- Some College > C- College Graduate D University Graduate. (There'd a difference over here) -- ______________________________________________________________________________ | spike1@mail.freenet.co.uk | "I'm alive!!! I can touch! I can taste! | | Andrew Halliwell BSc | I can SMELL!!! KRYTEN!!! Unpack Rachel | | in | and get out the puncture repair kit!" | | Computer Science | Arnold Judas Rimmer- Red Dwarf | ------------------------------------------------------------------------------ |GCv3.12 GCS>$ d-(dpu) s+/- a C++ US++ P L/L+ E-- W+ N++ o+ K PS+ w-- M+/++ | |PS+++ PE- Y t+ 5++ X+/X++ R+ tv+ b+ DI+ D+ G e++ h/h+ !r!| Space for hire | ------------------------------------------------------------------------------ --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: The league against squirrels (1:109/42) +----------------------------------------------------------------------------+ From: greg_t@connect.net.au 27-Oct-99 11:50:15 To: thannymeister@yahoo.com 28-Oct-99 10:23:10 Subj: Re: Routing and IP Masquerading with ISDNPM and 56k To: Mike Ruskai From: Greg Thomas Mike Ruskai wrote: > >Routing > >TYPE: default DESTINATION: blank ROUTER: 10.0.0.95 METRIC: 1 > >SUBNET: blank > >TYPE: net DESTINATION: 203.63.80 ROUTER: 10.0.0.95 METRIC: > >1 SUBNET: blank > >IP forwarding on > > Which machine(s) have the routing above? > > The server machine should have no LAN routing. The client machines should > have the default route above, but not the net route (if any net route, > only to 10, which is the class A network you've chosen). That is the routing of the server/gateway (10.0.0.95). None of the other machines have any routing info at all, only host lists and 10.0.0.95 as the DNS. The net route was generated with the "Create Default Net Route" button in the TCP/IP Configuration. Thanks :) Greg --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Customer of Connect.com.au Pty. Ltd. (1:109/42) +----------------------------------------------------------------------------+ From: sma.spam-not@rtd.com 27-Oct-99 06:25:09 To: All 28-Oct-99 10:23:15 Subj: Re: 1) Network services folder is empty 2) large drive problem From: James Moe John Dow wrote: > > I have two questions: > > Question 1: how to get network services back. > Question 2: how to go back to an earlier version of peer networking. > > Info: > > Peer networking has been working for me with only a few small problems. > > Suddenly I can't change the sharing on anything. Right click on a drive, for example, and > there's no choice at all. > > Furthermore, I now notice that the Network Services folder (in Connections) is completely > empty. > > The only things that have happened recently that might be relevant are: > > 1) I used PowerQuest's disk copy program to upgrade my C drive, and OS/2 went from a > 700MB partition to a 9 Gig partition; > This may be what caused the problem. It may have not copied the ACLs (Access Control Lists) to the new disk. Backup programs seem to consider ACLs special and have options to allow including them in a backup set. (Why not do that by default?) Interestingly, ZIP has no problem with that; it just grabs everything that matches its input list. I thought the copy program did a byte-by-byte image copy, but maybe not. You have a 9GB C: drive?!? Wow. I found it works to make the boot drive only large enough to comfortably hold the OS and supporting features (network, multimedia, etc), usually about 500 MB, separating sysem functions from user areas. Then these types of upgrades are a lot easier. > 2) I tried but was unsuccessful in backing out out the peer fixpak I had installed sometime > ago (this in an effort to eliminate the minor problems I've been having). What I tried to do > was to reinstall peer from the Warp CD. However, this failed apparently because drive C > is too large. (It reports there's no free space on it.) Perhaps my attempt that failed > messed things up? It didn't get very far at all before reporting the false problem. > Try running \ibmlan\install\peerinst.exe. Just say "OK" to all the questions. You might have to create a bogus file whose only purpose in life is to reduce the free disk space to less than 2 GB. This was a PITA problem while driver writers were catching up to the available disk sizes. There were a few programs that created the files for you; one even monitored the free disk space and adjusted the file size so there was always 2 GB free. -- sma at rtd dot com Remove ".spam-not" for email --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42) +----------------------------------------------------------------------------+ From: sma.spam-not@rtd.com 27-Oct-99 06:30:00 To: All 28-Oct-99 10:23:15 Subj: Re: VPN solutions for OS/2 From: James Moe Paul Dhuse wrote: > > Does anyone know of any VPN solutions for OS/2? I'd like to try to > connect to work from home and I don't want to have to install Windows to > do so. > FX communications, makers of IN-Joy, have a couple of products now. Tunnel/2 has been available for at least a year. And they have recently announced the availability of an IPSec product. IPSec is the basis for VPN. Point your browser to http://www.fx.dk -- sma at rtd dot com Remove ".spam-not" for email --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42) +----------------------------------------------------------------------------+ From: Klaus.Thielking-Riechert@rrze.un... 27-Oct-99 12:31:19 To: All 28-Oct-99 10:23:16 Subj: Re: ATM Network Cards Message sender: Klaus.Thielking-Riechert@rrze.uni-erlangen.de From: Klaus Thielking-Riechert Christoph, > has anybody experiences with ATM Network card. > I am seaching some fibreoptic 155 or 622 Mbs Cards with OS/2 (WS SMP and > WSeB) support. I have seen that FORE supported OS/2 with its ATM cards (SBA-200 it think). But I don't know if they have continued developing the drivers for OS/2 Best regards, Klaus -------------------------------------------------------------------------- Klaus Thielking-Riechert Tel: +49 9131 852-8738 B-WiN Labor / Regionales Rechenzentrum Erlangen Martensstrasse 1 91058 Erlangen email: klaus.thielking-riechert@rrze.uni-erlangen.de -------------------------------------------------------------------------- --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: University of Erlangen-Nuremberg (1:109/42) +----------------------------------------------------------------------------+ From: niclas.lindstrom@edt.ericsson.se 27-Oct-99 15:09:20 To: All 28-Oct-99 10:23:16 Subj: Re: How do I read and write ethernet packets? From: Niclas =?iso-8859-1?Q?Lindstr=F6m?= It looks like you're right, I am digging into the LAN Tech Ref right now... It will take some time to read and understand all this...:-) Do you know if the samples are downloadable from the web...? /Niclas Michiel Karsch wrote: > > ACSLAN.DLL gives you access to the lowest level of ethernet (except for > hardware). I believe the tcp/ip stack (and all others) uses this interface > to assemble IP packets as well. It is documented in LAN technical > reference, IEEE 802.2 and NETBIOS API. You can do everything you want that > isn 't done in hardware (e.g. receiving packects that are not addressed to > your card). Documentation is good, there are examples (c, asm code) using > the api. > --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: L M Ericsson Data AB (1:109/42) +----------------------------------------------------------------------------+ From: dropThis.DenverD@ibm.net 27-Oct-99 16:06:08 To: All 28-Oct-99 10:23:17 Subj: Re: VPN solutions for OS/2 From: dropThis.DenverD@ibm.net (DenverD ) In message <3815E4E9.DC807C48@mirapoint.com> - Paul Dhuse writes: > >Does anyone know of any VPN solutions for OS/2? I'd like to try to >connect to work from home and I don't want to have to install Windows to >do so. > >Thanks >-- >Paul R. Dhuse Paul, look at www.fx.dk where you will find both a working VPN solution using a very secure proprietary scheme and also the widely compatible IPSec (and "secure enough") means... -- DenverD AT ibm DOT net All addresses are anti-spam spoofs...you gotta fix'em up to mail me...sorry! --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: www.Texan.dk (1:109/42) +----------------------------------------------------------------------------+ From: rainer.doering@icn.siemens.de 26-Oct-99 21:00:22 To: All 28-Oct-99 10:23:17 Subj: Re: VPN solutions for OS/2 From: rainer.doering@icn.siemens.de (Rainer Doering) On Tue, 26 Oct 1999 10:29:13 -0700, Paul Dhuse wrote: >Does anyone know of any VPN solutions for OS/2? I'd like to try to >connect to work from home and I don't want to have to install Windows to >do so. > >Thanks Try http://www.sra.co.jp/people/akira/os2/vnc-pm/index.html --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Siemens AG,(Hofmannstr) Munich-Germany-Europe. (1:109/42) +----------------------------------------------------------------------------+ From: rde@tavi.co.uk 27-Oct-99 18:12:16 To: All 28-Oct-99 10:23:18 Subj: Re: How do I read and write ethernet packets? From: rde@tavi.co.uk (Bob Eager) On Wed, 27 Oct 1999 14:09:41, Niclas =?iso-8859-1?Q?Lindstr=F6m?= wrote: > It looks like you're right, I am digging into the LAN Tech Ref right > now... It will take some time to read and understand all this...:-) I'm interested in this too.... Can someone please post the document's full title...and perhaps the doc no? (like S999-1234, or whatever?) -- Bob Eager rde at tavi.co.uk PC Server 325; PS/2s 8595*3, 9595*3 (2*P60 + P90), 8535, 8570, 9556*2, 8580*6, 8557*2, 8550, 9577, 8530, P70, PC/AT.. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Tavi Systems (1:109/42) +----------------------------------------------------------------------------+ From: scoolboy@enteract.com 27-Oct-99 19:17:22 To: All 28-Oct-99 10:23:18 Subj: Re: Network modem routing From: scoolboy@enteract.com Dave wrote: > > I have the Addonics WebShuttle (same thing for the most part) All I think I > did was remove the no network adapter from MPTS (sp?) And only have the > network protocols 'bound' to the NIC. > > On Mon, 25 Oct 1999 08:58:38 -0500, scoolboy@enteract.com wrote: > > >I am havig a problem gettig my OS/2 machine, Warp 4 to connnect to the > >Netgear modem router inn my network. The Win98 machine will cause the > >modem to dial whenever an internet app is launched....but my OS/2 > >internet apps, Post road mailer and netscape won't cause the modem to > >dail when lauched. I think I have to change something in the TCPIP > >config folder but am not sure. Could someone please enlighten me. > >Any suggestions would be appreciated. Dave, How does one removve the No network adapter from MPTS? I'm new to this...could you elaborate? --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Kidsoncomputers (1:109/42) +----------------------------------------------------------------------------+ From: jknott@ibm.net 27-Oct-99 07:15:15 To: All 28-Oct-99 11:18:04 Subj: Re: Network modem routing From: jknott@ibm.net (James Knott) In article <3814620E.2F90@enteract.com>, scoolboy@enteract.com wrote: >I am havig a problem gettig my OS/2 machine, Warp 4 to connnect to the >Netgear modem router inn my network. The Win98 machine will cause the >modem to dial whenever an internet app is launched....but my OS/2 >internet apps, Post road mailer and netscape won't cause the modem to >dail when lauched. I think I have to change something in the TCPIP >config folder but am not sure. Could someone please enlighten me. >Any suggestions would be appreciated. Base OS/2 does not start the dialer when an app requires IP. The usual proceedure is to create a program object that calls LINKUP.EXE and passes the app name as a parameter. Look in the Internet (Modem) folders, and check the properties of Netscape or other apps, for an example. -- E-mail jknott@ca.ibm.com _________________________________________________________________________ The above opinions are my own and not those of ISM Corp., a subsidiary of IBM Canada Ltd. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: m.karsch@ath.nl 28-Oct-99 12:22:27 To: All 28-Oct-99 11:18:04 Subj: Re: How do I read and write ethernet packets? From: Michiel Karsch Some 4 years ago I orderd a book Lan Technical reference, IEEE 802.2 and Netbios API SC30-3587-00. I have seen it at the www developers connection site but the sites changes a lot and i can't find it anymore or no access. Nice thing is that mister bill also uses this API (nt/95/98, install dlc protocol). Of course with his know twists in it. (He has 'improved' the api) Bob Eager wrote: > On Wed, 27 Oct 1999 14:09:41, Niclas =?iso-8859-1?Q?Lindstr=F6m?= > wrote: > > > It looks like you're right, I am digging into the LAN Tech Ref right > > now... It will take some time to read and understand all this...:-) > > I'm interested in this too.... > > Can someone please post the document's full title...and perhaps the > doc no? > (like S999-1234, or whatever?) > > -- > Bob Eager > rde at tavi.co.uk > PC Server 325; PS/2s 8595*3, 9595*3 (2*P60 + P90), 8535, 8570, 9556*2, > 8580*6, > 8557*2, 8550, 9577, 8530, P70, PC/AT.. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: WorldOnline News server (1:109/42) +----------------------------------------------------------------------------+ From: niclas.lindstrom@edt.ericsson.se 28-Oct-99 13:02:00 To: All 28-Oct-99 11:18:04 Subj: Re: How do I read and write ethernet packets? From: Niclas =?iso-8859-1?Q?Lindstr=F6m?= Download it from http://service2.boulder.ibm.com/devcon/showcase/cat/afa0cntl.htm /Niclas Bob Eager wrote: > > On Wed, 27 Oct 1999 14:09:41, Niclas =?iso-8859-1?Q?Lindstr=F6m?= > wrote: > > > It looks like you're right, I am digging into the LAN Tech Ref right > > now... It will take some time to read and understand all this...:-) > > I'm interested in this too.... > > Can someone please post the document's full title...and perhaps the > doc no? > (like S999-1234, or whatever?) > > -- > Bob Eager > rde at tavi.co.uk > PC Server 325; PS/2s 8595*3, 9595*3 (2*P60 + P90), 8535, 8570, 9556*2, > 8580*6, > 8557*2, 8550, 9577, 8530, P70, PC/AT.. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: L M Ericsson Data AB (1:109/42) +----------------------------------------------------------------------------+ From: miket@interact.net.au 28-Oct-99 14:36:09 To: All 28-Oct-99 11:18:05 Subj: Using a networked HP LJ3100 ? From: Michael Taylor We have a HP LJ3100 installed on a NT Server V4 file and print server. Is there any way I can print to it from OS/2 V4? I know it is a WinPrinter and we have the HP JetSuite installed on the NT box. The NT4 WS boxes can print to it but only from Win Apps (ie "print' from the DOS command line doesn't work!). -- Regards, Mick Michael Taylor Senior Technical Specialist Search Software America PO Box 22, Braddon Canberra, ACT 2612, Australia Michael_Taylor@searchsoftware.com http://www.searchsoftware.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: InterACT Technology Group http://www.interact.net (1:109/42) +----------------------------------------------------------------------------+ From: lthientze@citynetworks.com.sg 28-Oct-99 13:46:03 To: All 28-Oct-99 11:18:05 Subj: Login to NT domain From: "ttlow" Hi, I have a problem here trying to connect my WARP 4.0 client to aWindows NT Server using TCP/IP. I 'm previously using Lan Requester with NetBIOS protocol and it works just fine, I can Login to the NT domain and map to any resources available in that domain. But it seems like there is no way to configure the Lan Requester to use TCP/IP as the transport protocol. I really appreciate if anyone can share your experience if you ever done that. Thanks. Best Regards, --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Subscriber of Pacific Internet (1:109/42) +----------------------------------------------------------------------------+ From: sbowring+nospam@mpc-data.co.uk 28-Oct-99 13:08:03 To: All 28-Oct-99 14:45:06 Subj: Re: How do I read and write ethernet packets? From: "Simon Bowring" On Tue, 26 Oct 1999 10:59:18 +0200, Michiel Karsch wrote: >ACSLAN.DLL gives you access to the lowest level of ethernet (except for >hardware). I believe the tcp/ip stack (and all others) uses this interface >to assemble IP packets as well. Are you sure? AFAIK this is not correct: multiple NDIS protocol drivers bind on top of the MAC driver (look at the "Bindings =" statements in your protocol.ini), in mine, Netbeui$, LANDD$, odi2ndi$, tcbbeui$and tcpip$ drivers all bind to the MAC driver. The protocol manager has a vector$ driver which is only used in multiple protocol environments where it sits on top of the MAC driver and transparently handles "fan-out" and "fan-in" of packets to and from the bound protocols above (which are offered packets and may say things like ("I'm not interested in this frame", "I'll have the frame, don't offer it to any other protocols" or, I'll have the frame, but offer it to other protocols). For a truly generic solution to packet monitoring you need to write an NDIS protocol driver that: 1) must be the first protocol bound to the MAC (so that it gets offered *all* frames), 2) can set the MAC driver into promiscuous mode, 3) that offers all received frames to other protocols, and 4) defines an API that your packet sniffing (or whatever) app will sit on. This is non-trivial - I have implemented such software! > IBM and at the first look at the sample in there (a token > ring driver) it looks too complex. I guess it includes > hardware access and things like that, but my driver only > need to access the existing NDIS driver and act as any > NDIS driver towards the application (TCP/IP-stack)... The TR driver is a MAC driver, you want to write (a much simpler, but nevertheless tricky) NDIS protocol driver, and you need the 3COM/MS NDIS 2.1 specification. Regards Simon Bowring, Senior Software Engineer, OS/2 Device Driver author since 1990 (OS/2 1.1) MPC Data Limited --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: MPC Data Limited (1:109/42) +----------------------------------------------------------------------------+ From: m.karsch@ath.nl 28-Oct-99 15:21:02 To: All 28-Oct-99 14:45:06 Subj: Re: How do I read and write ethernet packets? From: Michiel Karsch I think you are right but this is pre-ndis code from times of os/s ee 1.3; in that time there was also a need to mpx protocols. Docu says it's possible to 'direct' interface and dlc interface. Direct you receive all packets and dlc you specify sap 802.2 adressess (type 1 & 2 connections). So it must be possible to build a ip layer on top of the direct interface bypassing ndis protocol filtering. There is even a device driver interface for writing device drivers (eg tcp/ip) on top and then your comms go through landd$. Curious what happens if you use this and tcbeui$, i don't wanna try, you hope: I'll have the frame, but offer it to other protocols. I also don't want to try to write a ndis device driver. Michiel Simon Bowring wrote: > On Tue, 26 Oct 1999 10:59:18 +0200, Michiel Karsch wrote: > > >ACSLAN.DLL gives you access to the lowest level of ethernet (except for > >hardware). I believe the tcp/ip stack (and all others) uses this interface > >to assemble IP packets as well. > > Are you sure? AFAIK this is not correct: multiple NDIS protocol > drivers bind on top of the MAC driver (look at the "Bindings =" > statements in your protocol.ini), in mine, Netbeui$, LANDD$, > odi2ndi$, tcbbeui$and tcpip$ drivers all bind to the MAC driver. > > The protocol manager has a vector$ driver which is only used in > multiple protocol environments where it sits on top of the MAC > driver and transparently handles "fan-out" and "fan-in" of > packets to and from the bound protocols above (which are offered > packets and may say things like ("I'm not interested in this frame", > "I'll have the frame, don't offer it to any other protocols" or, > I'll have the frame, but offer it to other protocols). > > For a truly generic solution to packet monitoring you need to > write an NDIS protocol driver that: > > 1) must be the first protocol bound to the MAC (so that it gets > offered *all* frames), > 2) can set the MAC driver into promiscuous mode, > 3) that offers all received frames to other protocols, and > 4) defines an API that your packet sniffing (or whatever) app will > sit on. > > This is non-trivial - I have implemented such software! > > > IBM and at the first look at the sample in there (a token > > ring driver) it looks too complex. I guess it includes > > hardware access and things like that, but my driver only > > need to access the existing NDIS driver and act as any > > NDIS driver towards the application (TCP/IP-stack)... > > The TR driver is a MAC driver, you want to write (a much simpler, > but nevertheless tricky) NDIS protocol driver, and you need the > 3COM/MS NDIS 2.1 specification. > > Regards > > Simon Bowring, > Senior Software Engineer, > OS/2 Device Driver author since 1990 (OS/2 1.1) > MPC Data Limited --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: WorldOnline News server (1:109/42) +----------------------------------------------------------------------------+ From: eickhsr@jm-usa.com 28-Oct-99 11:32:01 To: All 28-Oct-99 14:45:06 Subj: Re: Excessive ethernet collisions From: Stephen Eickhoff Rainer Doering wrote: > On Mon, 25 Oct 1999 14:40:48 -0400 (EDT), "Mike Ruskai" > wrote: > > >I recently installed a token ring network alongside my existing ethernet > >network, and while doing a performance comparison, I discovered something > >odd. > > > >The token ring performance averaged around 800KB/sec. The ethernet > >performance was doing around 20KB/sec, and the hub's packet and collision > >lights were lighting up, one after the other, in regular rhythm. > > > big snip > > > > - Mike > > > >Remove 'spambegone' to send e-mail. > > > Have a try with configuring the ethernet cards to half duplex I think you might have it. I have a 3c905 that wouldn't work until I locked it to 100-half on my autosensing hub. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: UUNET WorldCom server (post doesn't reflect views (1:109/42) +----------------------------------------------------------------------------+ From: ows@netcom.ca 28-Oct-99 19:26:04 To: All 28-Oct-99 16:44:09 Subj: ThinkPad 600E & 3Com 3C589 PCMCIA *PROBLEMS* From: ows@netcom.ca (Orest Skrypuch) Well the 600E's arrived, and I'm busy installing Warp. These need to access our local network (NetBios & TCPIP), so getting the PCCard (PCMCIA) set up is paramount. I'm using 3Com 3C589C PCMCIA cards, previously used in TP560's. Well, to my horror I can not get the 600E to handshake with the network. I've reinstalled a bare Warp install now a couple of times, installed FP11, updated the MTPS and Peer services and the TCPIP stacks to the latest. I've installed Warp/peer services/TCPIP on a number of ThinkPads now, so that was a snap to run through. Then to that fresh setup I install the 600E PCCard drivers downloaded from the IBM device driver site, they are dated Sept 99. I then reconfigure the adapter to 3Com Etherlink PCCard family and attach the OS/2 NetBios and TCPIP protocols. (I have to install this as a second step, because the 600E's PCMCIA is not available in the base Warp4 install) I start the PC Card director, it recognizes the 3C589 PCMCIA lan card. I then logon to Peer services, but there is no communication. I can't see any of the new TP600E's resources from other machines, and opening up "File and Print Client Resource Browser" on the 600E shows only the TP600E listed. I also canNOT "ping" out to the network, although pinging the TP600E *itself* works. During boot up there are no error messages, or drivers skipped. Hot swapping the 3C589 to an older TP560 gets access to the network as normal, so it is not a card or cabling issue. I booted into Win98 on that new TP600E, and set it up for TCPIP on our intranet, and was able to ping out to another machine, which I guess proves out the base hardware. (notebook/PCMCIA slots/cabling/hub etc.) I'm sure that this is something really simple, but just a new twist on the new 600Es. Can anyone suggest what the needle in the haystack is? Any suggestions for testing this out further? HELP! * Orest * Orest ~~~ ows |at| netcom |dot| ca --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Netcom Canada (1:109/42) +----------------------------------------------------------------------------+ From: dshaw.is@bigfoot.com 28-Oct-99 19:59:15 To: All 28-Oct-99 16:44:09 Subj: Re: NT logon to OS/2 warp server From: Derek Shaw I'm just starting down this path, with a couple of wrinkles. Can you direct me to a resource that might describe the needed elements? I've got lots of experience with all the components and connecting them to all sorts of other servers (like DEC Alpha's with samba), but not having an NT box log on to a LanServer domain. You mentioned parenthetically "browser on the server and logon client on the workstations...", and I wonder if you could elucidate? This sounds like IBM code I need to put on to the server and the NT WS. Can you tell me how I get it/them? The IBM site has been singularly useless ot me in this regard. The wrinkle - the domain is LanServer 3 (adv) running on OS/2 2.11. Only running NetBIOS on the server. No plans to change that. It also serves printers and fax. Cheers! d. PS - feel free to reply by e-mail. Edward Jaffe wrote: > > James Moe wrote: > > The only thing I have not tried yet is re-installing NT. Some said > > that is almost a necessity, which is rather sad. > > We have numerous NT workstations that talk to our Warp Server no > problem. We didn't do anything special to make it work other than what > you have done (browser on the server and logon client on the > workstations). Our domain name is 8 characters (7 alpha 1 numeric). IMHO > there should be no reason to reinstall NT on your workstations. None of > our users ever did that! > > Make sure you have NETBIOS bound to the NIC on the NT workstations. Make > sure the domain name is specified correctly for the logon client. > > -- > | Edward E. Jaffe | Voice: (310) 338-0400 x318 | > | Mgr., Research & Development | Fax: (310) 338-0801 | > | Phoenix Software International | edjaffe@phoenixsoftware.com | > | 5200 W. Century Blvd., Suite 800 | USS24J24 at IBMMAIL | > | Los Angeles, CA 90045 | http://www.phoenixsoftware.com | -- This is a spam-resistant posting -- remove the -is to send e-mail. Derek Shaw Business Information Systems Victoria, BC. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Business Information Systems (1:109/42) +----------------------------------------------------------------------------+ From: ckerr@dcc.govt.nz 29-Oct-99 09:59:20 To: All 28-Oct-99 19:56:01 Subj: NE2000 driver for OS/2 2.0 From: "Cameron Kerr" Hi, I just got given a copy of OS/2 2.0 to play with, and try and get networked, from my bosses. However, it comes with no network drivers. Does anyone know where I can find find a driver, or has anyone got one themselves. Would a Warp driver be compatible, do you think (I'm guesssing not, but I'm a newbie to OS/2) Thanks ken_the_cockroach@yahoo.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Dunedin City Council (1:109/42) +----------------------------------------------------------------------------+ From: Nullmudshark-505@worldnet.att.net 28-Oct-99 19:04:07 To: All 29-Oct-99 11:30:18 Subj: Re: Network modem routing From: "Dave" On Wed, 27 Oct 1999 19:17:44 -0500, scoolboy@enteract.com wrote: >Dave wrote: >> >> I have the Addonics WebShuttle (same thing for the most part) All I think I >> did was remove the no network adapter from MPTS (sp?) And only have the >> network protocols 'bound' to the NIC. >Dave, How does one removve the No network adapter from MPTS? I'm new >to this...could you elaborate? SUre. Just open MPTS and enter "configure" Then "LAN Adapters and protocols" "Configure" Then in the "Current Configurations window" Remove the No Network Adapter Save and exit (not the TCP/IP part) and --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: nope (1:109/42) +----------------------------------------------------------------------------+ From: mmellin@home.com 29-Oct-99 03:15:25 To: All 29-Oct-99 11:30:19 Subj: Simple networking question.... From: mmellin@home.com (Mark Mellin) To preface: I know only enough to be dangerous !! I'm looking to set up my Warp4 client with TCPIP 4.1 as a "gateway" on a "cable modem'd" home lan. I wish to have access to printer resources, file systems, as well as sharing internet access between across OS/2, NT, and Win-9X. 1) Do I *need* PEER ?? (I've already tried installing Peer from the Warp4 CD, and the installs craps out with "processing locked files - insufficient HDD space. - the HDD boot partition has about 700Mb free...) I don't want Peer, I don't like IBM's clunky slapped-together utility approach to product integration - hell -it's a batch file away from the DOS based utility installs.... 2) Can I use -or- do I *need* SafeFire or Injoy Firewall to accomplish/meet my networks objectives ?? 3) Are there any traps or pitfalls I should be aware of ?? 4) Other than the obvious, is there any reason I'd be better off using OS/2 Warp over NT Workstation or Server as a gateway?? 5) Why the heck couldn't I find any documentation on the above :) Thanks in advance for any help. Mark Mellin --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: @Home Network (1:109/42) +----------------------------------------------------------------------------+ From: sma.spam-not@rtd.com 29-Oct-99 03:18:28 To: All 29-Oct-99 11:30:19 Subj: Re: NT logon to OS/2 warp server From: James Moe Derek Shaw wrote: > > I'm just starting down this path, with a couple of wrinkles. > > Can you direct me to a resource that might describe the needed elements? I've > got lots of experience with all the components and connecting them to all sorts > of other servers (like DEC Alpha's with samba), but not having an NT box log on > to a LanServer domain. > > You mentioned parenthetically "browser on the server and logon client on the > workstations...", and I wonder if you could elucidate? This sounds like IBM > code I need to put on to the server and the NT WS. Can you tell me how I get > it/them? The IBM site has been singularly useless ot me in this regard. > You need two pieces: the "browser enabler" that runs on the os/2 server. And the "client logon" that is installed on the NT workstation. You can find both at http://service.boulder.ibm.com/asd-bin/doc/en_us/catalog.htm Note that the "primary client logon" and the "coordinated client" are the same package. Install the coordinate option. > The wrinkle - the domain is LanServer 3 (adv) running on OS/2 2.11. Only > running NetBIOS on the server. No plans to change that. It also serves > printers and fax. > Bummer. The browser requires os/2 warp server 4. -- sma at rtd dot com Remove ".spam-not" for email --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42) +----------------------------------------------------------------------------+ From: rjfreem@attglobal.net 28-Oct-99 20:10:12 To: All 29-Oct-99 11:30:19 Subj: Using a Network From: rjfreem@attglobal.net I know absolutely nothing about a peer network, and I have used Judy's recipe to install and configure what I now have. I am at the point where computer A can ping computer B, and B can ping A successfully. From this, I assume that the network is properly configured. I hope. Computer A named OS2 is as follows; Connections>Computer name OS2 primary domain name RJF Connections>Tab Shares Share name Resource Type Auto-share Status INET k:\inet directory yes started Connections>Tab Connections Device Remote name Auto-connect Status N: \\OS2\INET yes active Computer B named MULTI Connections>Computer name MULTI primary domain name RJF Connections>tab Shares Share name Resource Type Auto-share Status NET D:\NET directory yes started Connection>tab Connections Device Remote name Auto-connect Status K: \\MULTI\net yes active I no idea if the above is correct. On computer A (OS2) resides K:\inet and on computer B (MULTI) resides d:\NET. It is these directories with which I wish to exchange files. I have no idea of how to access these directories. Help is appreciated. RJF -- ----------------------------------------------------------- rjfreem@attglobal.net ----------------------------------------------------------- --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: lsunley@mb.sympatico.ca 29-Oct-99 04:10:08 To: All 29-Oct-99 11:30:19 Subj: Re: Simple networking question.... From: lsunley@mb.sympatico.ca (Lorne Sunley) On Fri, 29 Oct 1999 03:15:51, mmellin@home.com (Mark Mellin) wrote: > To preface: I know only enough to be dangerous !! > > I'm looking to set up my Warp4 client with TCPIP 4.1 > as a "gateway" on a "cable modem'd" home lan. > > I wish to have access to printer resources, file > systems, as well as sharing internet access between > across OS/2, NT, and Win-9X. > > 1) Do I *need* PEER ?? (I've already tried > installing Peer from the Warp4 CD, and the > installs craps out with "processing locked > files - insufficient HDD space. - the HDD > boot partition has about 700Mb free...) > > I don't want Peer, I don't like IBM's clunky > slapped-together utility approach to product > integration - hell -it's a batch file away > from the DOS based utility installs.... Yes you need to have "Peer" this is the set of software that provides for disk and print sharing on OS/2. There must be something causing the problem with "locked file update" as it is used by almost all OS/2 software updates. Peer is best installed when the OS is first installed as the release version on the CD has a problem if any of the config.sys lines are > 200 and something characters. > > 2) Can I use -or- do I *need* SafeFire or Injoy > Firewall to accomplish/meet my networks > objectives ?? You can/need to use these to have the gateway to the cable modem done by the OS/2 machine. > > 3) Are there any traps or pitfalls I should be > aware of ?? The setup of the TCP/IP addressing for the use of NAT is fairly picky, but the documentation provided by the Injoy firewall has good examples and is easy to follow. > > 4) Other than the obvious, is there any reason > I'd be better off using OS/2 Warp over NT > Workstation or Server as a gateway?? OS/2 is more stable and less likely to have problems with "take over the machine and destroy it" attacks from others lurking on the internet. When you have NETBIOS and TCP/IP installed on Windows XX machines, the act of "sharing" the disk drive by default makes it available to ALL of the machines connected to the internet. In order to protect your machines and the data on them, the Windows XX machines should only be on "your" side of the firewall. You should also make sure that the disk sharing in Windows is only bound to the NETBIOS protocol not NETBIOS over TCP/IP (which is the default). > > 5) Why the heck couldn't I find any documentation > on the above :) > No Comment Lorne Sunley --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: MBnet Networking Inc. (1:109/42) +----------------------------------------------------------------------------+ From: lsunley@mb.sympatico.ca 29-Oct-99 04:35:18 To: All 29-Oct-99 11:30:19 Subj: Re: Using a Network From: lsunley@mb.sympatico.ca (Lorne Sunley) On Fri, 29 Oct 1999 03:10:24, rjfreem@attglobal.net wrote: > I know absolutely nothing about a peer network, and I have used Judy's > recipe to install and configure what I now have. I am at the point where > computer A can ping computer B, and B can ping A successfully. From this, > I assume that the network is properly configured. I hope. Computer A named > OS2 is as follows; > Connections>Computer name OS2 primary domain name RJF > Connections>Tab Shares > Share name Resource Type Auto-share Status > INET k:\inet directory yes started > Connections>Tab Connections > Device Remote name Auto-connect Status > N: \\OS2\INET yes active > Computer B named MULTI > Connections>Computer name MULTI primary domain name RJF > Connections>tab Shares > Share name Resource Type Auto-share Status > NET D:\NET directory yes started > Connection>tab Connections > Device Remote name Auto-connect Status > K: \\MULTI\net yes active > I no idea if the above is correct. On computer A (OS2) resides K:\inet > and on computer B (MULTI) resides d:\NET. It is these directories with > which I wish to exchange files. I have no idea of how to access these > directories. Help is appreciated. > RJF Based on your description. It looks like you have only connected the shared directory on a machine to a drive letter on the same machine. Set up a share on A (OS2) for the directory D:\NET which should share the LOCAL drive D: directory \NET on A Connections>Computer name OS2 primary domain name RJF Connections>Tab Shares Share name Resource Type Auto-share Status INET D:\NET directory yes started Try setting up a connection on B (MULTI) to the share on A (OS2). Connection>tab Connections Device Remote name Auto-connect Status Q: \\OS2\inet yes active Then you can copy from any drive\directory on B to the drive Q: (which in this case is drive D: directory NET on machine A. Lorne Sunley --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: MBnet Networking Inc. (1:109/42) +----------------------------------------------------------------------------+ From: merlins@ibm.net 29-Oct-99 01:58:21 To: All 29-Oct-99 11:30:19 Subj: Re: ThinkPad 600E & 3Com 3C589 PCMCIA *PROBLEMS* From: Meinolf Sondermann Hello Orest, just a guess: If you're using it in a docking station, give it at first a try without the dock, or at least use the slots in the thinkpad itself and not the dock's ones. Why ? Well, there is a known problem with 3com PCI networks cards and the TP 600E in a dock, where the 3com driver can access 8 PCI busses numberd 0 to 7, The 600E ( and just this machine ) assigns the number 8 to the bus in the dock. Maybe PCMCIA is a similar case. Bye/2 Meinolf Orest Skrypuch wrote: > > Well the 600E's arrived, and I'm busy installing Warp. These need to > access our local network (NetBios & TCPIP), so getting the PCCard > (PCMCIA) set up is paramount. I'm using 3Com 3C589C PCMCIA cards, > previously used in TP560's. > > Well, to my horror I can not get the 600E to handshake with the > network. > > I've reinstalled a bare Warp install now a couple of times, installed > FP11, updated the MTPS and Peer services and the TCPIP stacks to the > latest. > > I've installed Warp/peer services/TCPIP on a number of ThinkPads now, > so that was a snap to run through. > > Then to that fresh setup I install the 600E PCCard drivers downloaded > from the IBM device driver site, they are dated Sept 99. I then > reconfigure the adapter to 3Com Etherlink PCCard family and attach the > OS/2 NetBios and TCPIP protocols. (I have to install this as a second > step, because the 600E's PCMCIA is not available in the base Warp4 > install) > > I start the PC Card director, it recognizes the 3C589 PCMCIA lan card. > I then logon to Peer services, but there is no communication. I can't > see any of the new TP600E's resources from other machines, and opening > up "File and Print Client Resource Browser" on the 600E shows only the > TP600E listed. I also canNOT "ping" out to the network, although > pinging the TP600E *itself* works. > > During boot up there are no error messages, or drivers skipped. > > Hot swapping the 3C589 to an older TP560 gets access to the network as > normal, so it is not a card or cabling issue. > > I booted into Win98 on that new TP600E, and set it up for TCPIP on our > intranet, and was able to ping out to another machine, which I guess > proves out the base hardware. (notebook/PCMCIA slots/cabling/hub etc.) > > I'm sure that this is something really simple, but just a new twist on > the new 600Es. > > Can anyone suggest what the needle in the haystack is? > > Any suggestions for testing this out further? > > HELP! > > * Orest > > * Orest > > ~~~ > ows |at| netcom |dot| ca --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: merlins@ibm.net 29-Oct-99 02:08:07 To: All 29-Oct-99 11:30:19 Subj: Re: NT logon to OS/2 warp server From: Meinolf Sondermann Hello Derek, what you need is the "Primary Logon Client for Windows NT". You can get it from Software Choice at http://service.boulder.ibm.com/asd-bin/doc/en_us/catalog.htm CAUTION: This will _replace_ some of the networking code ( exes and dlls ) of NT. If you want to apply a service pack to NT, you must first uninstall the IBM client. If you miss this, you won't be able to logon to the machine - leads you to reinstall NT . Bye/2 Meinolf Derek Shaw wrote: > > I'm just starting down this path, with a couple of wrinkles. > > Can you direct me to a resource that might describe the needed elements? I've > got lots of experience with all the components and connecting them to all sorts > of other servers (like DEC Alpha's with samba), but not having an NT box log on > to a LanServer domain. > > You mentioned parenthetically "browser on the server and logon client on the > workstations...", and I wonder if you could elucidate? This sounds like IBM > code I need to put on to the server and the NT WS. Can you tell me how I get > it/them? The IBM site has been singularly useless ot me in this regard. > > The wrinkle - the domain is LanServer 3 (adv) running on OS/2 2.11. Only > running NetBIOS on the server. No plans to change that. It also serves > printers and fax. > > Cheers! > d. > > PS - feel free to reply by e-mail. > > Edward Jaffe wrote: > > > > James Moe wrote: > > > The only thing I have not tried yet is re-installing NT. Some said > > > that is almost a necessity, which is rather sad. > > > > We have numerous NT workstations that talk to our Warp Server no > > problem. We didn't do anything special to make it work other than what > > you have done (browser on the server and logon client on the > > workstations). Our domain name is 8 characters (7 alpha 1 numeric). IMHO > > there should be no reason to reinstall NT on your workstations. None of > > our users ever did that! > > > > Make sure you have NETBIOS bound to the NIC on the NT workstations. Make > > sure the domain name is specified correctly for the logon client. > > > > -- > > | Edward E. Jaffe | Voice: (310) 338-0400 x318 | > > | Mgr., Research & Development | Fax: (310) 338-0801 | > > | Phoenix Software International | edjaffe@phoenixsoftware.com | > > | 5200 W. Century Blvd., Suite 800 | USS24J24 at IBMMAIL | > > | Los Angeles, CA 90045 | http://www.phoenixsoftware.com | > > -- > This is a spam-resistant posting -- remove the -is to send e-mail. > > Derek Shaw > Business Information Systems Victoria, BC. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: merlins@ibm.net 29-Oct-99 07:41:24 To: All 29-Oct-99 11:30:19 Subj: Re: Using a Network From: Meinolf Sondermann rjfreem@attglobal.net wrote: > > I know absolutely nothing about a peer network, and I have used Judy's > recipe to install and configure what I now have. I am at the point where > computer A can ping computer B, and B can ping A successfully. From this, > I assume that the network is properly configured. I hope. Computer A named > OS2 is as follows; > Connections>Computer name OS2 primary domain name RJF > Connections>Tab Shares > Share name Resource Type Auto-share Status > INET k:\inet directory yes started > Connections>Tab Connections > Device Remote name Auto-connect Status > N: \\OS2\INET yes active > Computer B named MULTI > Connections>Computer name MULTI primary domain name RJF > Connections>tab Shares > Share name Resource Type Auto-share Status > NET D:\NET directory yes started > Connection>tab Connections > Device Remote name Auto-connect Status > K: \\MULTI\net yes active > I no idea if the above is correct. On computer A (OS2) resides K:\inet > and on computer B (MULTI) resides d:\NET. It is these directories with > which I wish to exchange files. I have no idea of how to access these > directories. Help is appreciated. > RJF > > > -- > ----------------------------------------------------------- > rjfreem@attglobal.net > ----------------------------------------------------------- There is little left to do. 1.) Make shure, that UserID and Password are the same on both machines. 2.) Logon to one of the two ( use the local logon ) 3.) Go Command line and enter: Net View \\ You should then get a list showing the shares of the other machine. That's the proof, that your basic setup is correct. 4.) In your above description, it shows up, that either machine just connects to it's own share. I.E. the box OS2 has a new drive N: which points to k:\inet on OS/2. Just exchange the contents of Connections between the two boxes. You then get new drive letters on either machine not physically present in them, but usable as if they were. 5.) .... ah ... forgot, that of course you have to logon to either machine at every boot to see the other's resources . ... and, under shares you have to setup access profiles . btw; Do you really have 11 ( or more ) partitions on box OS2, or is k: on shares just a typo ? Bye/2 Meinolf --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: christoph.huber@rzb-wien.raiffei... 29-Oct-99 11:20:00 To: All 29-Oct-99 11:30:19 Subj: Re: ATM Network Cards Message sender: christoph.huber@rzb-wien.raiffeisen.at From: Christoph Huber Klaus, thank you for your info, but the drivers documentation indicates that it is only supported on uniprocessor systems. I have evwent checked Olicom ATM adaptes and they have an Warp SMP Support and they even operate with WSeB but the do not work in IBM Netfinity 7000 (PPro). It is interesting to see that even the IBM sold Adapters (manufatored by Interphase) do not support OS/2 any more. I wonder how to attach OS/2 Server to high speed LANs and even how IBM wants to attach their famous Work Space on Demand to such networks? Best rgrds Christoph Klaus Thielking-Riechert wrote: > Christoph, > > > has anybody experiences with ATM Network card. > > I am seaching some fibreoptic 155 or 622 Mbs Cards with OS/2 (WS SMP and > > WSeB) support. > > I have seen that FORE supported OS/2 with its ATM cards (SBA-200 it > think). > But I don't know if they have continued developing the drivers for OS/2 > > Best regards, > > Klaus > > -------------------------------------------------------------------------- > Klaus Thielking-Riechert Tel: +49 9131 852-8738 > B-WiN Labor / Regionales Rechenzentrum Erlangen > Martensstrasse 1 > 91058 Erlangen > email: klaus.thielking-riechert@rrze.uni-erlangen.de > -------------------------------------------------------------------------- --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Netway AG (1:109/42) +----------------------------------------------------------------------------+ From: cocke@ibm.net 29-Oct-99 07:34:00 To: All 29-Oct-99 14:46:21 Subj: Re: Simple networking question.... From: Michael W. Cocke On Fri, 29 Oct 1999 03:15:51 GMT, Mark Mellin wrote: >To preface: I know only enough to be dangerous !! > >I'm looking to set up my Warp4 client with TCPIP 4.1 >as a "gateway" on a "cable modem'd" home lan. > >I wish to have access to printer resources, file >systems, as well as sharing internet access between >across OS/2, NT, and Win-9X. > >1) Do I *need* PEER ?? (I've already tried > installing Peer from the Warp4 CD, and the > installs craps out with "processing locked > files - insufficient HDD space. - the HDD > boot partition has about 700Mb free...) > > I don't want Peer, I don't like IBM's clunky > slapped-together utility approach to product > integration - hell -it's a batch file away > from the DOS based utility installs.... It's technically possible to share drives & printers without using peer, but you won't like it, and you probably won't be able to make it work - lpr and nfs are the keywords to look for if you want to see what I mean. I'd correct your problem with peer and use that, if I were you. > >2) Can I use -or- do I *need* SafeFire or Injoy > Firewall to accomplish/meet my networks > objectives ?? Yes, on the gateway machine - the one with 2 network cards in it. I looked (briefly) at SafeFire, then ordered the Injoy SOHO edition. Being familiar with Injoy support from the dialer software, it was a no-brainer to stick with Injoy. (that was a compliment to injoy, if it wasn't clear). > >3) Are there any traps or pitfalls I should be > aware of ?? Go thru the security configuration THROUGHLY - don't accept defaults unless you understand EXACTLY what you're doing. >4) Other than the obvious, is there any reason > I'd be better off using OS/2 Warp over NT > Workstation or Server as a gateway?? OS/2 is more secure and more robust. Take a look thru zdnet and dejanews for keywords "windows and security". You couldn't pay me to use a windows machine for a firewall. >5) Why the heck couldn't I find any documentation > on the above :) You were looking in the wrong places, apparently. There's a ton of useful info in the injoy manual, the tcp/ip redbooks, "OS/2 Warp Administrators Survival Guide", and comp.os.os2/networking.* > > >Thanks in advance for any help. >Mark Mellin > > > > > ======================================================================== Member: DNRC Watcher: Babylon 5 User: OS/2 Warp If you're going to do something, do something worth doing. ------------------------------------------------------------------------ --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: Netzwerk@rwg.de 29-Oct-99 14:54:06 To: All 29-Oct-99 14:46:22 Subj: Re: ATM Network Cards From: Netzwerk Christoph Huber schrieb: > > Hello, > > has anybody experiences with ATM Network card. > I am seaching some fibreoptic 155 or 622 Mbs Cards with OS/2 (WS SMP and > WSeB) support. At the moment I recommend, not to use an ATM card We are using Madge ATM cards and have a lot of problems with the new MPTS version WRG8610. The cards are running only with MPTS8423 and according to IBM they will not support ATM (If we want ATM support, we should make a request to IBM) With MPTS8610 the server traps at startup or shortly later. With 8610 we have one or two times a week a trap. (Now we are replacing the ATM cards with two token ring cards and start trying samba on an AIX server) mfg Stefan Hoenes --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: RWG GmbH (1:109/42) +----------------------------------------------------------------------------+ From: Netzwerk@rwg.de 29-Oct-99 15:06:09 To: All 29-Oct-99 14:46:22 Subj: Backup DC not working with TCPBeui From: Netzwerk We have a new enviroment, in which we are only using TCPBeui as transport protocol. (Warp 4, FP 10, MPTS8610) In this enviroment we have the problem, that if the Primary DC fails, the BDC is not able to take over. For example, if I do a net alias aliasname while the PCD is offline, I dont get a answer from the BDC. If we are using NETBEUI as transport protocol, all work fine. Has anyone similar experiences ? mfg Stefan Hoenes --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: RWG GmbH (1:109/42) +----------------------------------------------------------------------------+ From: cotroneo@stny.rr.com 29-Oct-99 20:56:22 To: All 29-Oct-99 19:49:03 Subj: Re: Simple networking question.... From: cotroneo@stny.rr.com In , mmellin@home.com (Mark Mellin) writes: >To preface: I know only enough to be dangerous !! > >1) Do I *need* PEER ?? (I've already tried > installing Peer from the Warp4 CD, and the > installs craps out with "processing locked > files - insufficient HDD space. - the HDD > boot partition has about 700Mb free...) Make sure the the first line in your config.sys is for the hpfs driver. Keith Cotroneo cotroneo@stny.rr.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Time Warner Road Runner - Binghamton NY (1:109/42) +----------------------------------------------------------------------------+ From: cotroneo@stny.rr.com 29-Oct-99 20:59:12 To: All 29-Oct-99 19:49:03 Subj: Re: Simple networking question.... From: cotroneo@stny.rr.com In , mmellin@home.com (Mark Mellin) writes: >To preface: I know only enough to be dangerous !! > >2) Can I use -or- do I *need* SafeFire or Injoy > Firewall to accomplish/meet my networks > objectives ?? I use safefire. It has been rock solid without even 1 hicup since I installed it (five months). Keith Cotroneo cotroneo@stny.rr.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Time Warner Road Runner - Binghamton NY (1:109/42) +----------------------------------------------------------------------------+ +============================================================================+