comp.os.os2.networking.tcp_ip (Usenet) Saturday, 18-Sep-1999 to Friday, 24-Sep-1999 +----------------------------------------------------------------------------+ From: Tim Stephen@CIOS.ORG 17-Sep-99 12:33:19 To: All 18-Sep-99 01:08:04 Subj: Re: NFS mount problem on WSeB (Help!) From: Tim Stephen@CIOS.ORG (Tim Stephen) On 17 Sep 1999 05:23:41 GMT, godfrey@isl.stanford.edu wrote: >> >It appears that you found the one case that "works." ... >Basically, I think WSEB NFS is unusable. I am waiting for some large >Bank to try it and explain to IBM what needs to be done. Thanks for your detailed analysis. Where can I email a report/complaint about this to IBM? So presuming that IBM will do a fix on this at some point (it does seem like a kind of basic capability for a server OS), how would one hear about it? I mean, where are fixes for WSeB likely to be announced? Best wishes, Tim --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Monmouth Internet (1:109/42) +----------------------------------------------------------------------------+ From: norrisg@nospamlinkline.com 17-Sep-99 08:00:06 To: All 18-Sep-99 01:08:05 Subj: Re: Two things about InJoy Firewall From: "Graham" On Thu, 16 Sep 1999 09:36:21 -0500, do not e-mail to wrote: > For me, at this time I do not mind that the gateway (my OS/2 machine ) is >always accessable. The fact that your gateway machine is always accessible means that things can be done to it which will make everything else accessible. What InJoy Firewall does is leave the key in the door when it is locked! Graham. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42) +----------------------------------------------------------------------------+ From: evsi@naverex.kiev.ua 17-Sep-99 13:56:18 To: All 18-Sep-99 01:08:05 Subj: Re: Two things about InJoy Firewall From: evsi@naverex.kiev.ua (Sergey I. Yevtushenko) On Fri, 17 Sep 1999 06:34:50, mmellin@home.com (Mark Mellin) wrote: > While dissapointing, it does mention the "granularity" in the docs. > I took the "extra options" part to mean "real internet security". > > Unfortunatley, I don't even have a network - nor do I need a gateway :( > > I say - support our OS/2 programmers that are out their writing good > OS/2 software !! > > Maybe I'll just fork over the extra $30 and buy what I thought > I'd already bought - and than again - maybe I won't... And life goes on... Take a look at http://www.lgs.kiev.ua/. For the same $55 SafeFire Firewall is a real firewall without such a 'granularity'. Regards, Sergey I. Yevtushenko *------------------------------------- ES@Home --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: ES@Home (1:109/42) +----------------------------------------------------------------------------+ From: rde@tavi.co.uk 17-Sep-99 22:26:23 To: All 18-Sep-99 04:37:14 Subj: Re: telnetd Login banner for Warp? From: rde@tavi.co.uk (Bob Eager) On Fri, 17 Sep 1999 21:07:56, Ray Garcia wrote: > Does anyone know of a simple configuration option to allow a login > banner file for telnetd? So far as I've looked, the best way to do this > seems to be to write a wrapper for TNLOGIN.EXE . If you want the banner generated by the machine you're logging into, that won't be very suitable as it's the client end. But the solution is simple. Look at TELNETD.CMD in \TCPIP\BIN; it's the file executed on login.... -- Bob Eager rde at tavi.co.uk PC Server 325; PS/2s 8595*3, 9595*3 (2*P60 + P90), 8535, 8570, 9556*2, 8580*6, 8557*2, 8550, 9577, 8530, P70, PC/AT.. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Tavi Systems (1:109/42) +----------------------------------------------------------------------------+ From: tvoltagg@home.com 18-Sep-99 13:04:14 To: All 19-Sep-99 06:48:21 Subj: Need help with TCP/IP Configuration From: tvoltagg@home.com Can anyone help me configure TCP/IP 4.1 for use as a "client" which is connected in a Peer network to a Win95b "server" which has a cable modem and Internet Gate on it? I'm having particular difficulty getting the "client" to access secure web sites in Netscape 4.61 Beta 2 and to Ftp. In particular, the Socks Server, Hostname and Routing tabs are a mystery to me. Otherwise everything else works OK. Particulars: "Server" - Win95b - 2 NICS - Internet Gate - Address 192.168.0.2 "Client" - Warp 4 - FP11 - TCP/IP 4.1 - Address 192.168.0.1 Address of Provider: IP Address: 24.7.223.2 Gateway: 24.7.223.1 Primary DNS: 24.2.212.12 Secondary DNS: 24.2.212.14 DNS Name: cg950645-a Any help would be appreciated. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Team OS/2 (1:109/42) +----------------------------------------------------------------------------+ From: operagost@e-mail.com 18-Sep-99 21:18:15 To: All 19-Sep-99 06:48:22 Subj: Re: Two things about InJoy Firewall From: "Stephen Eickhoff (remove the - to reply)" "Graham C. Norris" wrote: > Sergey I. Yevtushenko wrote: > > Take a look at http://www.lgs.kiev.ua/. > > For the same $55 SafeFire Firewall is a real firewall without such a > > 'granularity'. > > I am now running this. I found it easy to set it up so that it blocks > traffic from the machine running it, which is either impossible with > InJoy Firewall or not very obvious. However (a BIG however) SafeFire With the filter plugin installed and configured, I am able to block whatever ports I want. Currently I have 139 blocked to prevent NBTCP from going out, it works both on the machine running Injoy and the other machines on my network. I confirmed this by running security checks and portscans from the outside. There used to be a site where you could get a free security scan of your site (more comprehensive than a portscan) but like most things the guy decided to start making money off of it. > > fails unsafe just as InJoy does. If the firewall goes down, traffic from > the machine running (ok, which *had* just been running) it takes place > unchecked. This means that the best way to break into a system using > SafeFire is to try to make SafeFire crash: once it's down, the door is > open. > but only to the "firewall" machine. > > Both InJoy and SafeFire should use their device driver on the external > NIC to block traffic when the firewall is down. In other words, the > default should be to fail safe. I'm sure that the 16-bit driver model created in the 1980's makes this difficult to implement. Maybe with TCP/IP 4.1 this would be possible, but the average Joe isn't going to pay for it (since IBM has decided to cut the consumer market off entirely, we sure won't see it for free). --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: norrisg@nospamlinkline.com 18-Sep-99 19:45:29 To: All 19-Sep-99 06:48:23 Subj: Re: Two things about InJoy Firewall From: "Graham" On Sat, 18 Sep 1999 21:18:31 GMT, Stephen Eickhoff (remove the - to reply) wrote: >> fails unsafe just as InJoy does. If the firewall goes down, traffic from >> the machine running (ok, which *had* just been running) it takes place >> unchecked. This means that the best way to break into a system using >> SafeFire is to try to make SafeFire crash: once it's down, the door is >> open. >> > >but only to the "firewall" machine. You really don't think it matters someone getting access to your firewall machine? Someone suggested the firewall machine is simply a sacrificial machine, that it fit gets busted it really doesn't matter. In as much as it should not contain anything which can't be easily restored, that is true. You cannot have security however if the thing providing security isn't itself secure. Both InJoy Firewall and SafeFire have security problems which seriously undermine them. Both IJF and SF provide effective NAT translation. Both can filter packets effectively (although I see no sign of stateful inspection in IJF despite FX' claims). IJF however doesn't seem able to filter any packets from the machine running the firewall, SF can, but only when it is running. Both leave the door open when they're down. > I'm sure that the 16-bit driver model created in the 1980's makes this > difficult to implement. Whether a driver is written in 16, 32 64 or 8192 bit code has nothing to do with leaving the door open when the firewall is down. There is a problem in that both need to work with both dual-homed and single-homed systems, however a simple parameter to the driver to tell it whether to fail safe or not ought to overcome that by allowing those who want failsafe behaviour to have it while still allowing single-homed systems to work normally (anyone using a single-homed system isn't going to get a heck of a lot of security anyway). I think you may find Link Guard responds to these security concerns (BTW, I'm not connected with either product in any way), at least they admit they are valid. I find FX disinclined to listen to criticism of their products, which is not a happy state of affairs when it is holes in a security product which are being discussed. Graham. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42) +----------------------------------------------------------------------------+ From: lsunley@mb.sympatico.ca 19-Sep-99 04:30:03 To: All 19-Sep-99 06:48:23 Subj: Re: ADSL (PacBell) From: lsunley@mb.sympatico.ca (Lorne Sunley) On Sun, 19 Sep 1999 03:24:16, "Nick Danger" wrote: > I'm having no luck getting Warp 4 to talk to my new > PacBell DSL line, which works fine with 'doze and Linux. > > The ethernet adapter driver appears to load correctly, > and I can ping it. I've filled in all the fields in tcpcfg > according to the best advice I've found in the newsgroups, > but no dice. > > If I try to ping the nameserver (or the gateway), > I get no response. I do NOT get "send failed". In fact > the little green light on the ADSL box blinks, and if > I kill ping with a ^C, it will have sent as many packets > as there were blinks. But no packets are returned. > > The one place I find conflicting advice in the > newsgroups is in the "routing" tab of tcpcfg. > Here I have a 'default' route to the dotted-quad > address of PacBell's gateway, with metric 1. > A "net" route has been added automatically > right under it, and I haven't messed with that. > > The 'network' tab has the interface enabled > manually, with my dotted-quad address and > the netmask as provided by PacBell. > > I've screwed around with the hostname and > domain name, but it doesn't seem to make > any difference whether they are there or > not. > > Any hints from somebody who has made this > work? > I know that the extra "net" route is not needed. What is your "net" route pointing to. You can delete the line in setup.cmd or delete it from the TCPCFG notebook. Some people have had better luck with the DSL->NIC configurations when they have installed all the fixpacks for MPTS or upgraded to the WR8610 refresh which provides the 32 bit stack code. There is a fixpack for WR8620 that is installed on top of WR8610. Lorne Sunley --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: MBnet Networking Inc. (1:109/42) +----------------------------------------------------------------------------+ From: godfrey@isl.stanford.edu 19-Sep-99 05:43:11 To: All 19-Sep-99 06:48:23 Subj: Re: SSH alternative for OS/2? From: godfrey@isl.stanford.edu In <37E4009A.94F460B1@businessnet.net>, Sacha Prins writes: >Hi, > >Does someone know of a good SSH alternative for OS/2, or a consttruction >involving IPSec or similar technology to securely communicate over the >net. I'd rather not set up firewalls and stuff for this. I'm actually >looking for an "easy" solution. > >Anyone have ideas about this? SSH has been ported to OS/2. Check the usual OS/2 archives, of do a search. As I recall, there is a version 1.2 and a 2.0, but I think only the 1.2 is really functional. > >Sacha > > --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: ISL, Stanford University (1:109/42) +----------------------------------------------------------------------------+ From: godfrey@isl.stanford.edu 19-Sep-99 05:40:26 To: All 19-Sep-99 06:48:23 Subj: Re: NFS mount problem on WSeB (Help!) From: godfrey@isl.stanford.edu In <7rtcf2$b5m$1@news.monmouth.com>, Tim Stephen@CIOS.ORG (Tim Stephen) writes: >On 17 Sep 1999 05:23:41 GMT, godfrey@isl.stanford.edu wrote: >>> >>It appears that you found the one case that "works." > > ... > >>Basically, I think WSEB NFS is unusable. I am waiting for some large >>Bank to try it and explain to IBM what needs to be done. > >Thanks for your detailed analysis. > >Where can I email a report/complaint about this to IBM? There is a problem report form somewhere in the IBM Software Support WEB pages, but it has been serverl years since anyone has heard anything back from these reports. If you have a support contract with IBM, and you are mentioned in the Fortune 500, you should have not problem reporting whatever you like. > >So presuming that IBM will do a fix on this at some point (it does seem >like a kind of basic capability for a server OS), how would one >hear about it? I mean, where are fixes for WSeB likely to be announced? > There will certainly be a FIXPAK for WSEB, and it seems it will appear on: http://ps.boulder.ibm.com/pbin-usa-ps/getobj.pl?/pdocs-usa/softupd.html Another good place to check is: ftp://service.boulder.ibm.com/ps/ --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: ISL, Stanford University (1:109/42) +----------------------------------------------------------------------------+ From: as@sci.fi 19-Sep-99 19:00:09 To: All 19-Sep-99 18:48:07 Subj: Re: SSH alternative for OS/2? From: Anssi Saari Sacha Prins writes: > Not actually tried it, but the readme says: "sshd is not quite ready yet, I've included > it anyway. It is OK for serving files (as a scp daemon), however interactive mode > doesn't really work (you have to press CTRL-J to finish a line)." > > This doesn't sound too promising. The workaround to that is that you run cmd.exe on the server machine. There's also some kind of a port of 1.2.27, but I understand it's not perfect either. -- Anssi Saari - as@sci.fi --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Tampere University of Technology (1:109/42) +----------------------------------------------------------------------------+ From: baden@unixg.ubc.ca 19-Sep-99 15:47:07 To: All 19-Sep-99 18:48:07 Subj: Re: ADSL (PacBell) From: baden@unixg.ubc.ca (Baden Kudrenecky) In , "Nick Danger" writes: >I'm having no luck getting Warp 4 to talk to my new >PacBell DSL line, which works fine with 'doze and Linux. Does your service use a static IP or DHCP? >The ethernet adapter driver appears to load correctly, >and I can ping it. I've filled in all the fields in tcpcfg >according to the best advice I've found in the newsgroups, >but no dice. > >If I try to ping the nameserver (or the gateway), >I get no response. I do NOT get "send failed". In fact >the little green light on the ADSL box blinks, and if >I kill ping with a ^C, it will have sent as many packets >as there were blinks. But no packets are returned. > >The one place I find conflicting advice in the >newsgroups is in the "routing" tab of tcpcfg. >Here I have a 'default' route to the dotted-quad >address of PacBell's gateway, with metric 1. >A "net" route has been added automatically >right under it, and I haven't messed with that. I have @home with a static IP, so it was actually more work to configure than DHCP. Maybe my setup.cmd file can help: route -fh arp -f ifconfig lo 127.0.0.1 ifconfig lan0 24.113.29.27 netmask 255.255.254.0 [my IP and netmask] route add default 24.113.28.1 1 [my router (gateway) and metric] route add net 24 24.113.28.1 1 [ibid] ipgate off >The 'network' tab has the interface enabled >manually, with my dotted-quad address and >the netmask as provided by PacBell. Summarising my "TCP/IP Configuration" settings for Connect: provided parameters: hostname domain name DNS (ip) netmask primary nameserver secondary nameserver router (gateway), metric is 1 page 1 enable interface LAN0 ip address 24.114.29.27 [my ip] subnet mask 255.255.254.0 page 2 (routing) default 24.113.28.1 [my router or gateway] net 24 24.113.28.1 [both have metric 1] page 3 hostname cr534821-a local domain name crdva1.bc.wave.home.com nameserver addresses: 24.113.53.13 [primary] 24.113.53.14 [secondary] Note that nothing else is enabled or entered, that should be all that you need. >I've screwed around with the hostname and >domain name, but it doesn't seem to make >any difference whether they are there or >not. > >Any hints from somebody who has made this >work? > >----------------------------- >This sig intentionally left blank. >----------------------------- > > baden baden@unixg.ubc.ca http://baden.nu/ OS/2, Solaris & Linux --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: @Home Network Canada (1:109/42) +----------------------------------------------------------------------------+ From: nickdanger@null.net 19-Sep-99 02:04:21 To: All 20-Sep-99 00:54:18 Subj: Re: ADSL (PacBell) From: Nick Danger Lorne Sunley wrote: > Some people have had better luck with the DSL->NIC > configurations when they have installed all the fixpacks > for MPTS or upgraded to the WR8610 refresh which > provides the 32 bit stack code. There is a fixpack for > WR8620 that is installed on top of WR8610. Having now installed WR8610, I can say that wasn't it. :( --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: World Wide Rants (1:109/42) +----------------------------------------------------------------------------+ From: nospam@savebandwidth.invalid 19-Sep-99 02:48:01 To: All 20-Sep-99 00:54:18 Subj: Re: SSH alternative for OS/2? From: nospam@savebandwidth.invalid (John Thompson) In <37E4009A.94F460B1@businessnet.net>, Sacha Prins writes: >Does someone know of a good SSH alternative for OS/2, or a consttruction >involving IPSec or similar technology to securely communicate over the >net. I'd rather not set up firewalls and stuff for this. I'm actually >looking for an "easy" solution. Have you tried ssh itself? ftp://hobbes.nmsu.edu/pub/os2/apps/internet/telnet/client/sshos203.zip -John (John.Thompson@ibm.net) --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: The Crimson Permanent Assurance (1:109/42) +----------------------------------------------------------------------------+ From: sprins@businessnet.net 19-Sep-99 14:05:22 To: All 20-Sep-99 00:54:18 Subj: Re: SSH alternative for OS/2? From: Sacha Prins John Thompson wrote: > In <37E4009A.94F460B1@businessnet.net>, Sacha Prins writes: > > >Does someone know of a good SSH alternative for OS/2, or a consttruction > >involving IPSec or similar technology to securely communicate over the > >net. I'd rather not set up firewalls and stuff for this. I'm actually > >looking for an "easy" solution. > > Have you tried ssh itself? > > ftp://hobbes.nmsu.edu/pub/os2/apps/internet/telnet/client/sshos203.zip > Not actually tried it, but the readme says: "sshd is not quite ready yet, I've included it anyway. It is OK for serving files (as a scp daemon), however interactive mode doesn't really work (you have to press CTRL-J to finish a line)." This doesn't sound too promising. Sacha --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: A2000 Kabeltelevisie en Telecommunicatie (1:109/42) +----------------------------------------------------------------------------+ From: NewsReader@NerdWorld.org 19-Sep-99 13:25:20 To: All 20-Sep-99 00:54:19 Subj: Java 1.18 Clobbers Netscape From: "Casey Bralla" I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. It cannot do a DNS lookup, complaining about no DNS entry. If I type in an IP address, it works just fine. Running nslookup from an OS/2 Window works fine too, so I know the DNS setup is still good. I've tried re-installing Netscape 4.04, but no avail. Anybody got any suggestions? Casey Bralla LinuxList@NerdWorld.org --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: The NerdWorld Organisation (1:109/42) +----------------------------------------------------------------------------+ From: as@sci.fi 19-Sep-99 08:40:15 To: All 20-Sep-99 00:54:19 Subj: Re: SSH alternative for OS/2? From: Anssi Saari Sacha Prins writes: > Hi, > > Does someone know of a good SSH alternative for OS/2, or a consttruction > involving IPSec or similar technology to securely communicate over the > net. I'd rather not set up firewalls and stuff for this. I'm actually > looking for an "easy" solution. > > Anyone have ideas about this? Well, for an SSH client, Zoc has served me well. -- Anssi Saari - as@sci.fi --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Tampere University of Technology (1:109/42) +----------------------------------------------------------------------------+ From: Exovede@ImpaleTheSpammers.Com@Vi... 20-Sep-99 00:37:09 To: All 20-Sep-99 14:52:05 Subj: Re: Java 1.18 Clobbers Netscape Message sender: Exovede@ImpaleTheSpammers.Com@Videotron.ca From: Exovede@ImpaleTheSpammers.Com@Videotron.ca (Michel A Goyette) Sun, 19 Sep 1999 20:25:40, "Casey Bralla" a ‚crit: > I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. > It cannot do a DNS lookup, complaining about no DNS entry. If I type in an > IP address, it works just fine. Running nslookup from an OS/2 Window works > fine too, so I know the DNS setup is still good. > > I've tried re-installing Netscape 4.04, but no avail. > > Anybody got any suggestions? How did you make this upgrade? What version did you have before? I upgraded mine yesterday from the last build (may 99 I think) and everything is working perfectly. Salut, Michel (sur OS/2 Warp 4.07) ICQ #13376913 http://pages.infinit.net/exovede --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: nobody@nowhere.com 20-Sep-99 00:29:06 To: All 20-Sep-99 14:52:05 Subj: HELP--Configuring Local Server for IBM IC Phone From: nobody@nowhere.com (Nobody) Greetings, I have used IBM's ICPhone but now find that OS/2 users are somehow not able to get on the server because the OS/2 program does not enable password protection of the email address...or some other problem. The WinBarf version of ICPhone allows the user to specify NONE as the server to connect with, and simply enter the ip address of the person you want to call. I can use a Windows computer to call my OS/2 computer, no problem. The problem is, I can't use the OS/2 computer to call any other computer because, when connected to the IBM Phone Server, it tells you that ipaddress is no longer connected. (Of course, it never was.) The SETUP dialogue allows you to choose a server. Among the choices: ppc009 HRL local server Make ppc009 a loopback server and assign it 127.0.0.1 in the HOSTS file... ...it didn't work. If anyone has any ideas what an HRL local server is or how I can get the program to accept that address, I would be very grateful. Cheers, Jim --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: The Nothing Company that HATES junk mail! (1:109/42) +----------------------------------------------------------------------------+ From: sprins@businessnet.net 20-Sep-99 02:23:27 To: All 20-Sep-99 14:52:06 Subj: Re: SSH alternative for OS/2? From: Sacha Prins Anssi Saari wrote: > Sacha Prins writes: > > > Not actually tried it, but the readme says: "sshd is not quite ready yet, I've included > > it anyway. It is OK for serving files (as a scp daemon), however interactive mode > > doesn't really work (you have to press CTRL-J to finish a line)." > > > > This doesn't sound too promising. > > The workaround to that is that you run cmd.exe on the server > machine. There's also some kind of a port of 1.2.27, but I understand > it's not perfect either. So when running CMD on the server the SSHD works like the standard OS/2 telnetd except then it is encrypted over the net. Is this correct? If so it is just what I'm looking for. Sacha --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: A2000 Kabeltelevisie en Telecommunicatie (1:109/42) +----------------------------------------------------------------------------+ From: jimburke@ionet.net 20-Sep-99 01:10:10 To: All 20-Sep-99 14:52:06 Subj: Re: HELP--Configuring Local Server for IBM IC Phone From: jimburke@ionet.net (Jim Burke) I didn't realize the windows version would still work that way. ICPhone was the only cross-platform telephony program I ever ran across. It was a good one too. But I don't think a rumored upgrade to the os2 version ever got released. The developers at haifa at ibm Israel didn't even have an os/2 machine. Maybe this is an application os/2 users could pool buyers and purchase the server software from ibm. I'd pay $50 for it. Wonder how many it would take to interest Big Blue? nobody@nowhere.com (Nobody) wrote: >Greetings, > I have used IBM's ICPhone but now find that OS/2 users are somehow not able >to get on the server because the OS/2 program does not enable password >protection of the email address...or some other problem. > The WinBarf version of ICPhone allows the user to specify NONE as the server >to connect with, and simply enter the ip address of the person you want to >call. > I can use a Windows computer to call my OS/2 computer, no problem. > The problem is, I can't use the OS/2 computer to call any other computer >because, when connected to the IBM Phone Server, it tells you that ipaddress >is no longer connected. (Of course, it never was.) > The SETUP dialogue allows you to choose a server. Among the choices: > ppc009 HRL local server > Make ppc009 a loopback server and assign it 127.0.0.1 in the HOSTS file... > ...it didn't work. > If anyone has any ideas what an HRL local server is or how I can get the >program to accept that address, I would be very grateful. >Cheers, >Jim --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: ioNET Inc. (1:109/42) +----------------------------------------------------------------------------+ From: nobody@nowhere.com 20-Sep-99 01:42:29 To: All 20-Sep-99 14:52:06 Subj: Re: HELP--Configuring Local Server for IBM IC Phone From: nobody@nowhere.com (Nobody) I posed that very question to IBM, tell us how to create a server, and got a stock answer: IBM no longer supports the program. But the server's still out there! Even if you connect properly, it will not reveal that you have logged into the server to other users...therefore they can't call you. But, weirdly, you can use the Win95 version to call your OS/2 version via its IP Address. Cheers, Jim ------------ In message <7s41nl$mq$1@ionews.ionet.net> - jimburke@ionet.net (Jim Burke)Mon, 20 Sep 1999 01:10:20 GMT writes: :> :>I didn't realize the windows version would still work that way. :>ICPhone was the only cross-platform telephony program I ever ran across. :>It was a good one too. :> :>But I don't think a rumored upgrade to the os2 version ever got released. :>The developers at haifa at ibm Israel didn't even have an os/2 machine. :> :>Maybe this is an application os/2 users could pool buyers and purchase the server software from ibm. :>I'd pay $50 for it. Wonder how many it would take to interest Big Blue? :> :> :> :>nobody@nowhere.com (Nobody) wrote: :> :>>Greetings, :> :>> I have used IBM's ICPhone but now find that OS/2 users are somehow not able :>>to get on the server because the OS/2 program does not enable password :>>protection of the email address...or some other problem. :>> The WinBarf version of ICPhone allows the user to specify NONE as the server :>>to connect with, and simply enter the ip address of the person you want to :>>call. :>> I can use a Windows computer to call my OS/2 computer, no problem. :>> The problem is, I can't use the OS/2 computer to call any other computer :>>because, when connected to the IBM Phone Server, it tells you that ipaddress :>>is no longer connected. (Of course, it never was.) :>> The SETUP dialogue allows you to choose a server. Among the choices: :> :>> ppc009 HRL local server :> :>> Make ppc009 a loopback server and assign it 127.0.0.1 in the HOSTS file... :>> ...it didn't work. :> :>> If anyone has any ideas what an HRL local server is or how I can get the :>>program to accept that address, I would be very grateful. :> :>>Cheers, :> :>>Jim :> :> :> --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: The Nothing Company that HATES junk mail! (1:109/42) +----------------------------------------------------------------------------+ From: nickdanger@null.spamTHIS.net 19-Sep-99 18:47:11 To: All 20-Sep-99 14:52:06 Subj: Re: ADSL (PacBell) From: "Nick Danger" On Sun, 19 Sep 1999 15:47:15 GMT, Baden Kudrenecky wrote: > Maybe my setup.cmd file can help: It did help. After realizing mine was the same, and that it ought to be working, I began to suspect hardware... in particular some I/O address or IRQ conflict, even though the hardware manager showed no such thing. Sure enough, REMing out the sound card in config.sys cured the problem. I'd rather have ADSL speeds than sounds. :) --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: World Wide Rants (1:109/42) +----------------------------------------------------------------------------+ From: mmellin@home.com 20-Sep-99 07:36:09 To: All 20-Sep-99 14:52:06 Subj: Re: Two things about InJoy Firewall From: mmellin@home.com (Mark Mellin) On Fri, 17 Sep 1999 13:56:36, evsi@naverex.kiev.ua (Sergey I. Yevtushenko) wrote: > On Fri, 17 Sep 1999 06:34:50, mmellin@home.com (Mark Mellin) wrote: > > > While dissapointing, it does mention the "granularity" in the docs. > > I took the "extra options" part to mean "real internet security". > > > > Unfortunatley, I don't even have a network - nor do I need a gateway :( > > > > I say - support our OS/2 programmers that are out their writing good > > OS/2 software !! > > > > Maybe I'll just fork over the extra $30 and buy what I thought > > I'd already bought - and than again - maybe I won't... And life goes on... > > Take a look at http://www.lgs.kiev.ua/. > For the same $55 SafeFire Firewall is a real firewall without such a > 'granularity'. > > Regards, > Sergey I. Yevtushenko Thanks Sergey, I have downloaded and installed SafeFire Firewall 1.1b (after uninstalling Injoy Firewall). For me - the novice - SafeFire was easier to figure out, and most importantly - it's a firewall !! I did like the bell-n-whistle PM monitor that Injoy had, I hope this is something you can include in a future release of SF. Thanks again for your response, Mark --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: @Home Network (1:109/42) +----------------------------------------------------------------------------+ From: Tony.Saucedo@eagletcs.com 20-Sep-99 11:31:10 To: All 20-Sep-99 20:06:16 Subj: Netbios over TCP/IP question - Using "Net View" From: Tony Saucedo Does anyone know if there are any limitations on seeing workstations (OS/2) that are running Netbios over TCP/IP? Can you only see the workstations in the RCFNAMES.LST? I've used Netbios over TCP/IP before and even now, however we have a location that has 7 workstations, 2 of them are at a remote location using Netbios over TCP/IP. These two are not able to see the other workstations on the network via "NET VIEW". I believe one of these workstations sees only 4 of the other 6. The other workstation only sees itself. ? Now from the main site location all 5 that are their can see each other using "NET VIEW", which by the way they are ALL on the same OS/2 domain (Warp Server 4). But these same 5 cannot see the 2 workstations at the remote location (LAN) via Netbios over TCP/IP? We have edit 5 names in RFCNAMES.LST and the RFC broadcast list, and they match up. It seems like there's a limit on the number of names that can be entered. Can this be bypassed by editing the RFCNAMES.LST and RFCBCST.LST adding more that are out on the net. Any ideas or thoughts? Thanks. -- Tony, ****************************************************** Tony Saucedo EAGLE Traffic Control Systems Austin, Texas E-mail: Tony.Saucedos@eagletcs.com For E-mail Reply make the id singular (- the s) ****************************************************** --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Eagle Traffic Control Systems (1:109/42) +----------------------------------------------------------------------------+ From: cotroneo@stny.rr.com 21-Sep-99 00:04:19 To: All 21-Sep-99 02:02:04 Subj: How to re-establish file and print services? From: cotroneo@stny.rr.com On my warp4 lan with file and print services, if I reboot the server, the client looses connection to the server's drives. Is there a way to restart this connection without having to reboot the client? Logging on again doesn't do it. Keith Cotroneo cotroneo@stny.rr.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Time Warner Road Runner - Binghamton NY (1:109/42) +----------------------------------------------------------------------------+ From: cdailey@hhs.state.ne.us 20-Sep-99 22:07:19 To: All 21-Sep-99 02:02:04 Subj: Re: Netbios over TCP/IP question - Using "Net View" From: cdailey@hhs.state.ne.us (Chad Dailey) Tony-- Possible reasons for your problems: PEER is not running on the remote workstations. Directed broadcasting is not allowed by your routers. [TCPBEUI_nif] settings are incorrect in PROTOCOL.INI The number of names in the names file can be changed by adjusting the NAMESFILE parameter in the [TCPBEUI_nif] section in PROTOCOL.INI Good luck, Chad On Mon, 20 Sep 1999 11:31:20 -0500, Tony Saucedo wrote: >Does anyone know if there are any limitations >on seeing workstations (OS/2) that are running >Netbios over TCP/IP? > >Can you only see the workstations in the RCFNAMES.LST? > >I've used Netbios over TCP/IP before and even now, >however we have a location that has 7 workstations, >2 of them are at a remote location using Netbios over >TCP/IP. >These two are not able to see the other workstations >on the network via "NET VIEW". I believe one of these >workstations sees only 4 of the other 6. >The other workstation only sees itself. ? > >Now from the main site location all 5 that are their can >see each other using "NET VIEW", which by the way they >are ALL on the same OS/2 domain (Warp Server 4). >But these same 5 cannot see the 2 workstations at the >remote location (LAN) via Netbios over TCP/IP? > >We have edit 5 names in RFCNAMES.LST and the RFC broadcast >list, and they match up. > >It seems like there's a limit on the number of names >that can be entered. Can this be bypassed by editing the >RFCNAMES.LST and RFCBCST.LST adding more that are out on >the net. > >Any ideas or thoughts? >Thanks. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: State of Nebraska (1:109/42) +----------------------------------------------------------------------------+ From: sma.spam-not@rtd.com 21-Sep-99 03:28:17 To: All 21-Sep-99 02:02:04 Subj: Re: How to re-establish file and print services? From: James Moe cotroneo@stny.rr.com wrote: > > On my warp4 lan with file and print services, if I reboot > the server, the client looses connection to the server's drives. > > Is there a way to restart this connection without having to > reboot the client? Logging on again doesn't do it. > Open the Connections folder. Select Network->Network Services->Shared Resources and Network Connections. You should have a notebook. Click on the connections tab, highlight the resource, click on Re-Connect. -- sma at rtd dot com Remove ".spam-not" for email --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42) +----------------------------------------------------------------------------+ From: hellwig@exp.bessy.de 21-Sep-99 17:34:10 To: All 21-Sep-99 17:28:11 Subj: How to start ftpd or tftpd in binary transfer mode From: Chris Hellwig Hi, when I start ftpd or tftpd they start in ascii-transfer mode. The client ftp can switch to bin. But as I have a program on the client side which don't switch to bin I wish to start ftpd or tftpd in binary transfer mode. Bye Chris --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: solution@stiscan.com 21-Sep-99 16:00:10 To: All 21-Sep-99 17:28:11 Subj: Re: Warp 4.5 and DNS From: solution@stiscan.com (Leon D. Zetekoff) On Wed, 25 Aug 1999 09:49:36, jknott@ibm.net (James Knott) wrote: Hi James... > In article , > solution@stiscan.com (Leon D. Zetekoff) wrote: > >HI there...We've got Warp 4.5 here (Warp for eBusiness) and I'd like to > >use the DDNS to provide a backup DNS service but it seems that I must > >have DHCP running. All my internal hosts are in the HOSTS file and are > >manually configured. ANy ideas on what to do? > > The idea of DDNS, is to provide host name lookup for DHCP clients. i.e > users on a different network get to keep their host names, which are > then assigned a new, foreign IP address. Since you use a hosts > file, whose names are you planning on storing in the DNS? I want to have a backup DNS to our ISP and the DDNS that ships with WSeB seems to be a version of Bind...The hosts file is ONLY for local intranet hosts. Leon ================================================================== "We create solutions..." Leon D. Zetekoff, N.C.E. Voice: 561-241-3210 Product Manager FAX: 561-997-6518 Solution Technology E-mail: solution@stiscan.com 1101 South Rogers Circle WWW: http://www.stiscan.com Suite 14 NNTP: news://news.stiscan.com Boca Raton, FL 33487 --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Solution Technology, Inc. (1:109/42) +----------------------------------------------------------------------------+ From: smclennan@ibm.net 21-Sep-99 12:20:19 To: All 21-Sep-99 17:28:12 Subj: Re: Java 1.18 Clobbers Netscape From: smclennan@ibm.net (Scott McLennan) Try loading netscape 4.61 beta. It is much more stable than 4.04 and works fine with java1.1.8. It is at http://www6.software.ibm.com/dl/net/net46-p In message - "Casey Bralla" Sun, 19 Sep 1999 13:25:40 -0700 (PDT) writes: :> :>I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. :>It cannot do a DNS lookup, complaining about no DNS entry. If I type in an :>IP address, it works just fine. Running nslookup from an OS/2 Window works :>fine too, so I know the DNS setup is still good. :> :>I've tried re-installing Netscape 4.04, but no avail. :> :>Anybody got any suggestions? :> :>Casey Bralla :>LinuxList@NerdWorld.org :> :> --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: doug.bissett"at"ibm.net 21-Sep-99 18:49:01 To: All 21-Sep-99 17:28:12 Subj: Re: Java 1.18 Clobbers Netscape From: doug.bissett"at"ibm.net (Doug Bissett) On Sun, 19 Sep 1999 20:25:40, "Casey Bralla" wrote: > I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. > It cannot do a DNS lookup, complaining about no DNS entry. If I type in an > IP address, it works just fine. Running nslookup from an OS/2 Window works > fine too, so I know the DNS setup is still good. > > I've tried re-installing Netscape 4.04, but no avail. > > Anybody got any suggestions? > > Casey Bralla > LinuxList@NerdWorld.org > > I run NS2.02, and Comm4.04, and I updated to JAVA 1.1.8, when it first came out. No problems. I just did the JAVA 1.1.8 update, with no problems. The DNS lookup sounds more like something in the dialer went AWOL. Which dialer are you using? Most are supposed to update the DNS address in the Netscape program, when the connection is made. Hope this helps... ****************************** From the PC of Doug Bissett doug.bissett at ibm.net The " at " must be changed to "@" ****************************** --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: as@sci.fi 21-Sep-99 22:04:10 To: All 21-Sep-99 17:28:12 Subj: Re: SSH alternative for OS/2? From: Anssi Saari Sacha Prins writes: > Anssi Saari wrote: > > > Sacha Prins writes: > > > > > Not actually tried it, but the readme says: "sshd is not quite ready yet, I've included > > > it anyway. It is OK for serving files (as a scp daemon), however interactive mode > > > doesn't really work (you have to press CTRL-J to finish a line)." > > > > > > This doesn't sound too promising. > > > > The workaround to that is that you run cmd.exe on the server > > machine. There's also some kind of a port of 1.2.27, but I understand > > it's not perfect either. > > So when running CMD on the server the SSHD works like the standard OS/2 telnetd except then > it is encrypted over the net. Is this correct? If so it is just what I'm looking for. Yes, that's correct. -- Anssi Saari - as@sci.fi --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Tampere University of Technology (1:109/42) +----------------------------------------------------------------------------+ From: cbrace@lim.nl 22-Sep-99 00:53:00 To: All 22-Sep-99 04:29:01 Subj: Reinstall LAN interface woes From: cbrace@lim.nl (Colin Brace) Hello all, Last week my harddisk crashed and I am in the process of rebuilding my system. but am having trouble getting the network component working again. On a brandnew HD, I installed FP6 on top of the base Warp 4. Updated MTPS to 08610 and TCPIP to 4.02t. Dialup via COM2: with In-Joy, the PPP dialer, works fine. The TCPIP stack seems to be correctly set up. But I can't seem to get a connection going now across my network card (RTL8029). The DOS diagnostic program says the card is fine. Booting, OS/2, the network card driver loads fine. But DHCP can't find the host. (I've activated the interface in the TPCIP notebook and added the name of my ISP's nameserver.) I have a cable network connetion which worked flawlessly for more than a year with more or less the same OS/2 configuration, but now I can't seem to get it working again. Anyone have any suggestions?... --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: UUNET-NL (http://www.nl.uu.net) (1:109/42) +----------------------------------------------------------------------------+ From: cbrace@lim.nl 22-Sep-99 00:57:09 To: All 22-Sep-99 04:29:01 Subj: Reinstalling LAN interface woes From: cbrace@lim.nl (Colin Brace) Hello all, Last week my harddisk crashed and I am in the process of rebuilding my system. but am having trouble getting the network component working again. On a brandnew HD, I installed FP6 on top of the base Warp 4. Updated MTPS to 08610 and TCPIP to 4.02t. Dialup via COM2: with In-Joy, the PPP dialer, works fine. The TCPIP stack seems to be correctly set up. But I can't seem to get a connection going now across my network card (RTL8029). The DOS diagnostic program says the card is fine. Booting, OS/2, the network card driver loads fine. But DHCP can't find the host. (I've activated the interface in the TPCIP notebook and added the name of my ISP's nameserver.) I have a cable network connetion which worked flawlessly for more than a year with more or less the same OS/2 configuration, but now I can't seem to get it working again. Anyone have any suggestions?... --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: UUNET-NL (http://www.nl.uu.net) (1:109/42) +----------------------------------------------------------------------------+ From: mcmorran@norfolk.infi.net 21-Sep-99 21:18:26 To: All 22-Sep-99 04:29:01 Subj: Re: Java 1.18 Clobbers Netscape From: mcmorran@norfolk.infi.net (Peter McMorran) In , on 09/21/99 at 06:49 PM, doug.bissett"at"ibm.net (Doug Bissett) said: >On Sun, 19 Sep 1999 20:25:40, "Casey Bralla" > wrote: >> I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. >> It cannot do a DNS lookup, complaining about no DNS entry. If I type in an >> IP address, it works just fine. Running nslookup from an OS/2 Window works >> fine too, so I know the DNS setup is still good. >> >> I've tried re-installing Netscape 4.04, but no avail. >> >> Anybody got any suggestions? >> >> Casey Bralla >> LinuxList@NerdWorld.org >> >> >I run NS2.02, and Comm4.04, and I updated to JAVA 1.1.8, when it >first came out. No problems. I just did the JAVA 1.1.8 update, >with no problems. >The DNS lookup sounds more like something in the dialer went >AWOL. Which dialer are you using? Most are supposed to update >the DNS address in the Netscape program, when the connection is >made. Yes. Assuming this is Warp 4, nslookup uses \mptn\etc\resolv2 (at least on my system), while other commands, including ping, use resolv in the same directory. Dialers (DOIP, InJoy) always update resolv, but may not update resolv2. Clients get the DNS address from one of these files. You might try a ping to separate the Java/browser issue from the DNS problem. For example, ping www.ibm.com. Cheers, Peter -- ----------------------------------------------------------- mcmorran@norfolk.infi.net (Peter McMorran) ----------------------------------------------------------- --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: InfiNet (1:109/42) +----------------------------------------------------------------------------+ From: graham_norris@candle.com 21-Sep-99 17:44:28 To: All 22-Sep-99 04:29:01 Subj: Re: Setting up a LAN From: Graham Norris You need something to perform NAT. InJoy Firewall can do this, as can LinkGuard's SafeFire. Note that InJoy Firewall isn't a firewall if you only buy the basic version; that may not bother you. Any machine connected to your OS/2 machine will need TCP/IP configured as that is the lingua franca of the internet. InJoy Firewall and SafeFire come with setup instruction, and both are available for free 30 day demo. NetBIOS has nothing to do with internet connectivity. Graham. "Richard N. Hinton" wrote: > > September 21, 1999 > > My system has an OS-2 connection to the internet (Warp 4, fp 11 > latest mpts) via a cable modem, which works OK. Now I want to connect > two other computers to the net > through the first computer's connection. I assume I will need Injoy, > but what protocol > do I run on the other W95 machine, netbios perhaps? What settings? Is > there a HOWTO on this > like in Linux? > > Richard N. Hinton > rhinton@mediaone.net --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Candle (1:109/42) +----------------------------------------------------------------------------+ From: rhinton@mediaone.net 21-Sep-99 19:16:12 To: All 22-Sep-99 04:29:01 Subj: Setting up a LAN From: "Richard N. Hinton" September 21, 1999 My system has an OS-2 connection to the internet (Warp 4, fp 11 latest mpts) via a cable modem, which works OK. Now I want to connect two other computers to the net through the first computer's connection. I assume I will need Injoy, but what protocol do I run on the other W95 machine, netbios perhaps? What settings? Is there a HOWTO on this like in Linux? Richard N. Hinton rhinton@mediaone.net --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: MediaOne Express -=- Central Region (1:109/42) +----------------------------------------------------------------------------+ From: norrisg@linkline.com 21-Sep-99 22:34:28 To: All 22-Sep-99 04:29:02 Subj: Re: Java 1.18 Clobbers Netscape From: "Graham C. Norris" Do you think you've posted in enough newsgroups? Which one would like an answer in? The short answer is that installing Java can't cause this, so something else has happened. Try posting more details to just one newsgroup. Graham. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42) +----------------------------------------------------------------------------+ From: norrisg@linkline.com 21-Sep-99 22:32:08 To: All 22-Sep-99 04:29:02 Subj: Re: How to start ftpd or tftpd in binary transfer mode From: "Graham C. Norris" This is normal behaviour for an FTP daemon. Better get that program fixed! Graham. Chris Hellwig wrote: > when I start ftpd or tftpd they start in ascii-transfer mode. > The client ftp can switch to bin. But as I have a program on > the client side which don't switch to bin I wish to start > ftpd or tftpd in binary transfer mode. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42) +----------------------------------------------------------------------------+ From: Michael_Groves@valuelink.ccmail.... 22-Sep-99 10:10:18 To: All 22-Sep-99 10:37:23 Subj: OS/2 & RADIUS Server Message sender: Michael_Groves@valuelink.ccmail.compuserve.com From: Michael We are using Warp 4 as an FTP Server, which use the TRUSERS file for authentication. Is it possible to use a RADIUS Server for authentication -- Michael Groves Valuelink Information Services Sent via Deja.com http://www.deja.com/ Share what you know. Learn what you don't. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Deja.com - Share what you know. Learn what you do (1:109/42) +----------------------------------------------------------------------------+ From: progel@worldnet.att.net 22-Sep-99 20:34:16 To: All 23-Sep-99 06:08:14 Subj: Terminal Emulator From: Lawrence Progel I have to provide several os/2 systems with a connection to SCO Unix running RealWorld accounting. It's character based, nothing fancy. I'd like to use TCP/IP rather than the serial port. Does anyone know of a good terminal emulation package (ansi or wyse60)? Thanks for your help, Larry. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: AT&T WorldNet Services (1:109/42) +----------------------------------------------------------------------------+ From: cotroneo@stny.rr.com 22-Sep-99 23:48:05 To: All 23-Sep-99 06:08:14 Subj: Re: Setting up a LAN From: cotroneo@stny.rr.com In <37E811C8.F6D2EE6E@mediaone.net>, "Richard N. Hinton" writes: >September 21, 1999 > > My system has an OS-2 connection to the internet (Warp 4, fp 11 >latest mpts) via a cable modem, which works OK. Now I want to connect >two other computers to the net >through the first computer's connection. I assume I will need Injoy, >but what protocol >do I run on the other W95 machine, netbios perhaps? What settings? Is >there a HOWTO on this >like in Linux? > >Richard N. Hinton >rhinton@mediaone.net > Check here for instructions: http://nateliskov.ne.mediaone.net/network/homenet.htm You will need a second Network Interface Card in your primary machine plus a hub to interconnect the other pc's. Since I only have two machines on my lan, a crossover cable can be used instead of the hub. More than two and you need a hub. You will also need Network Address Translation software (NAT). In my opinion, Safefire is outstanding. I have been running it for months without one trap, failure or problem..... rock solid software. Keith Keith Cotroneo cotroneo@stny.rr.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Time Warner Road Runner - Binghamton NY (1:109/42) +----------------------------------------------------------------------------+ From: cstumpf@monmouth.com 22-Sep-99 22:28:18 To: All 23-Sep-99 16:41:02 Subj: Re: Terminal Emulator From: "Chris Stumpf" Well you actually have two choices to give users access, you can use XFree86/OS2, which judging by your description would be overkill or you could use ZOC from emtec. Here is the url: http://www.emtec.com/zoc/index.htm It is a wonderful program, it can be tweeked and customized to work how you need, it also supports connections over modem, telnet connections, named pipes, Unix Rlogin, Windows modems (TAPI) and Secure Shell (SSH). You can purchase this program from BMT Micro at : http://www.bmtmicro.com On Wed, 22 Sep 1999 20:34:32 -0400, Lawrence Progel wrote: :>I have to provide several os/2 systems with a connection to SCO Unix :>running RealWorld accounting. It's character based, nothing fancy. I'd :>like to use TCP/IP rather than the serial port. Does anyone know of a :>good terminal emulation package (ansi or wyse60)? :> :>Thanks for your help, :> :>Larry. :> Chris Stumpf C.S.E. Computer Services Computer Consultant (OS/2, Lan, Wan, CTI) Serenity Systems Channel Partner IBM Certified Systems Expert - OS/2 Warp 4 web: http://cse.anterras.net email: cse@anterras.net phone: (732)918-2480 --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Monmouth Internet (1:109/42) +----------------------------------------------------------------------------+ From: hellwig@exp.bessy.de 23-Sep-99 12:09:17 To: All 23-Sep-99 20:16:00 Subj: Re: How to start ftpd or tftpd in binary transfer mode From: Chris Hellwig Hi, since the client is burned to an eprom I can't change it.... Chris "Graham C. Norris" wrote: > > This is normal behaviour for an FTP daemon. Better get that program > fixed! > > Graham. > > Chris Hellwig wrote: > > when I start ftpd or tftpd they start in ascii-transfer mode. > > The client ftp can switch to bin. But as I have a program on > > the client side which don't switch to bin I wish to start > > ftpd or tftpd in binary transfer mode. --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: cotroneo@stny.rr.com 23-Sep-99 12:10:15 To: All 23-Sep-99 20:16:00 Subj: realaudio "not a realaudio file" From: cotroneo@stny.rr.com I have realaudio configured on my machine. As soon as the player starts to receive the file, I flashes a window that tells me that the file is not a realaudio file. The transmission halts from there. I think tcpip is ok because the player does start to get the file. Any thoughts of what might be going on. Keith Cotroneo cotroneo@stny.rr.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Time Warner Road Runner - Binghamton NY (1:109/42) +----------------------------------------------------------------------------+ From: nospam@nospam.noway.com 23-Sep-99 09:41:24 To: All 23-Sep-99 20:16:00 Subj: Re: realaudio "not a realaudio file" From: "Roberto F. Salomon" On Thu, 23 Sep 1999 12:10:31 GMT, cotroneo@stny.rr.com wrote: >I have realaudio configured on my machine. As >soon as the player starts to receive the file, I >flashes a window that tells me that the file >is not a realaudio file. The transmission halts >from there. I think tcpip is ok because the >player does start to get the file. The file is probably a G2 file and won't play with RealAudio 5 for Win 3.x --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: nospam (1:109/42) +----------------------------------------------------------------------------+ From: cmhall@umich.edu 23-Sep-99 13:43:11 To: All 23-Sep-99 20:16:00 Subj: Re: realaudio "not a realaudio file" From: cmhall@umich.edu (Chris Hall) In , "Roberto F. Salomon" writes: >On Thu, 23 Sep 1999 12:10:31 GMT, cotroneo@stny.rr.com wrote: > >>I have realaudio configured on my machine. As >>soon as the player starts to receive the file, I >>flashes a window that tells me that the file >>is not a realaudio file. The transmission halts >>from there. I think tcpip is ok because the >>player does start to get the file. > >The file is probably a G2 file and won't play with RealAudio 5 for Win 3.x > > There's another possibility that I've found which confuses 16 bit realaudio. If the file name does not conform to 8.3 specifications, realaudio won't see it (a DOS limitation). So try saving the file locally with an 8.3 name and try again. Chris Hall (cmhall@umich.edu) Dept. of Geological Sciences, U. of Michigan "They use Microsoft Excel to plot their data. Sometimes they get the results they expect, sometimes they don't." from Microsoft TV commercial, 1999. --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: jjs@sdl.com 23-Sep-99 08:47:18 To: cstumpf@monmouth.com 23-Sep-99 20:16:01 Subj: Re: Terminal Emulator To: Chris Stumpf From: I really like Kermit95 for OS/2, wyse60 included. It is not expensive either. http://www.columbia.edu/kermit/k95.html On Wed, 22 Sep 1999, Chris Stumpf wrote: > Well you actually have two choices to give users access, you can use > XFree86/OS2, which judging by your description would be overkill or you could > use ZOC from emtec. Here is the url: > > http://www.emtec.com/zoc/index.htm > > It is a wonderful program, it can be tweeked and customized to work how you > need, it also supports connections over modem, telnet connections, named > pipes, Unix Rlogin, Windows modems (TAPI) and Secure Shell (SSH). You can > purchase this program from BMT Micro at : > > http://www.bmtmicro.com > > > On Wed, 22 Sep 1999 20:34:32 -0400, Lawrence Progel wrote: > > :>I have to provide several os/2 systems with a connection to SCO Unix > :>running RealWorld accounting. It's character based, nothing fancy. I'd > :>like to use TCP/IP rather than the serial port. Does anyone know of a > :>good terminal emulation package (ansi or wyse60)? > :> > :>Thanks for your help, > :> > :>Larry. > :> > > > Chris Stumpf > C.S.E. Computer Services > Computer Consultant (OS/2, Lan, Wan, CTI) > Serenity Systems Channel Partner > IBM Certified Systems Expert - OS/2 Warp 4 > > > web: http://cse.anterras.net > email: cse@anterras.net > phone: (732)918-2480 > > > > > --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Keane, Inc (1:109/42) +----------------------------------------------------------------------------+ From: mamodeo@stny.rr.com 23-Sep-99 12:25:17 To: All 23-Sep-99 20:16:01 Subj: Re: realaudio "not a realaudio file" From: Marty Chris Hall wrote: > > In , "Roberto F. Salomon" writes: > >On Thu, 23 Sep 1999 12:10:31 GMT, cotroneo@stny.rr.com wrote: > > > >>I have realaudio configured on my machine. As > >>soon as the player starts to receive the file, I > >>flashes a window that tells me that the file > >>is not a realaudio file. The transmission halts > >>from there. I think tcpip is ok because the > >>player does start to get the file. > > > >The file is probably a G2 file and won't play with RealAudio 5 for Win 3.x > > > > > > There's another possibility that I've found which confuses 16 bit realaudio. > If the file name does not conform to 8.3 specifications, realaudio won't > see it (a DOS limitation). So try saving the file locally with an 8.3 name > and try again. Not true. I've used RealAudio 5.0 on remote files whose names are longer than 8.3. The 8.3 limitation only applies locally. PS: Is there an easy way to save these files locally? Many of them do not have standard http:// or ftp:// URLs. - Marty --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: IBM Global Services North -- Burlington, Vermont, (1:109/42) +----------------------------------------------------------------------------+ From: donm@ftel.net 23-Sep-99 16:12:04 To: All 23-Sep-99 20:16:01 Subj: Re: ADSL (PacBell) From: donm@ftel.net (Don Morse) :>I've screwed around with the hostname and :>domain name, but it doesn't seem to make :>any difference whether they are there or :>not. :> :>Any hints from somebody who has made this :>work? :> If only I could get DSL from PB. I'm 40,000 feet from the C.O. and until there is repeater available for xDSL products I'm SOL... I'm running ISDN right now so it's not catastrophic. I am installing DSL in one of our POPS and I can take one of my OS/2 machines over there and try the hookup. I'll let you know....... ******************************************************** If a million monkeys on typewriters can eventually type out the Bible, given enough time. Then Bill Gates had 25 monkeys and a week! ******************************************************** dmorse@pacificnet.net using Merlin and EmTec News ICQ 245937, AOL IM merlinof2 www.blackpalace.com ******************************************************** --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Franklin interNet http://www.franklin.net (1:109/42) +----------------------------------------------------------------------------+ From: graham_norris@candle.com 23-Sep-99 10:54:15 To: All 23-Sep-99 20:16:01 Subj: Re: Setting up a LAN From: Graham Norris cotroneo@stny.rr.com wrote: > You will need a second Network Interface Card in your primary machine plus > a hub to interconnect the other pc's. Since I only have two machines on my > lan, a crossover cable can be used instead of the hub. More than two and > you need a hub. You don't actually have to have a 2nd NIC if you have a hub, you can configure two interfaces on one NIC as explained in SafeFire's and InJoy Firewall's documentation. If all you're after is NAT and aren't particularly security concsious this is fine. To do the job as securely as possible you do need 2 NICs to physically separate the internal and external networks. Graham. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Candle (1:109/42) +----------------------------------------------------------------------------+ From: graham_norris@candle.com 23-Sep-99 10:49:28 To: All 23-Sep-99 20:16:02 Subj: Re: How to start ftpd or tftpd in binary transfer mode From: Graham Norris Chris Hellwig wrote: > since the client is burned to an eprom I can't change it.... Sounds like you'll need an outside in approach. First convert the file to text (uuencode perhaps), transmit it, the convert it back to binary (uudecode?). Graham. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Candle (1:109/42) +----------------------------------------------------------------------------+ From: cotroneo@stny.rr.com 23-Sep-99 22:35:21 To: All 24-Sep-99 04:26:03 Subj: Re: realaudio "not a realaudio file" From: cotroneo@stny.rr.com In , "Roberto F. Salomon" writes: >On Thu, 23 Sep 1999 12:10:31 GMT, cotroneo@stny.rr.com wrote: > >>I have realaudio configured on my machine. As >>soon as the player starts to receive the file, I >>flashes a window that tells me that the file >>is not a realaudio file. The transmission halts >>from there. I think tcpip is ok because the >>player does start to get the file. > >The file is probably a G2 file and won't play with RealAudio 5 for Win 3.x > > No, they are not G2 files. I can play them on my other os/2 machine. There is something about the configuratio of this other machine that is doing it. No clue what though.... Keith Cotroneo cotroneo@stny.rr.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Time Warner Road Runner - Binghamton NY (1:109/42) +----------------------------------------------------------------------------+ From: sengsational@my-deja.com 24-Sep-99 02:13:07 To: All 24-Sep-99 04:26:04 Subj: Good OS/2 Home Network Hardware From: sengsational@my-deja.com I've been digging around for an hour or so, and found that SMC, Linksys, or Kingston might be a good choice of NIC (OS/2 drivers available), and there's a RealTEK 8029 chipset that has OS/2 drivers (not sure about what manufacturers use that chipset, though). Also there's a way to hook up more than two computers without the use of a hub, and that sounds cheap, er, I mean interesting. My old reliable is OS/2 Warp. I've got an Omnicube 2 port (KVM) to switch between that and my new W98 machine, but I've got no way to move files (yet!). My wife has a W3.1/Warp3 dual boot machine that I want to network-in also. My work laptop has a 10/100 card in it, that, if 'easy', I'd network in. So what kind of 'networking' can I get from OS/2 to Windows? I figure I'd always be able to FTP, but can I 'mount' the OS/2 drives on the Windows system? My new hard drive is quite a bit bigger, so maybe I'll just FTP the whole blasted thing! But to make it interesting, I have an HPFS partition on the OS/2 box. Then we get into the hardware. I've got some old token ring cards in the OS/2 and the dual boot machines. They'll come out to give me a certain IRQ for the new ethernet board you will help me specify (ha!). I don't need to spend lots of money on a smidge of extra speed, so the '10' stuff looks fine. So what should I get? Can I get by with the cards that you don't need a hub with, or should I just get the cards and a hub? I can't bear to unplug my OS/2 machine and put it in the attic! Help me pick-out a networking scheme. Thanks. --Dale-- Sent via Deja.com http://www.deja.com/ Before you buy. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Deja.com - Before you buy. (1:109/42) +----------------------------------------------------------------------------+ From: jluiz@neocomm.com.br 23-Sep-99 23:33:03 To: All 24-Sep-99 04:26:04 Subj: Re: Need help with TCP/IP Configuration From: =?iso-8859-1?Q?Jo=E3o?= Luiz Pereira Junior This is a multi-part message in MIME format. --------------8384F0487E2906C70D0D8424 Content-Type: multipart/alternative; boundary="------------68E0869D13FC8E1794A72D55" --------------68E0869D13FC8E1794A72D55 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit The better approach for you sittuation is use Network Address Tranlation (NAT). Since you have only one public IP address (24.7.223.2) you will need private ip addresses running on you LAN (192.168.0.1). I use this software : WinRoute 4.0 NAT, Firewall, Proxy server, Mail server for Windows NT and Windows 95/98. Home Page: http://www.winroute.com/ You'll need to setup the server as a NAT server. On the OS/2 side you'll need to create/replace the default route (setup.cmd): route add default 192.168.0.2 -hopcount 1 and change the resolv2 file like this: domain .com nameserver 24.2.212.12 nameserver 24.2.212.14 regards, JL tvoltagg@home.com wrote: > Can anyone help me configure TCP/IP 4.1 for use as a "client" which > is connected in a Peer network to a Win95b "server" which has a cable > modem and Internet Gate on it? I'm having particular difficulty getting the > "client" to access secure web sites in Netscape 4.61 Beta 2 and to Ftp. > In particular, the Socks Server, Hostname and Routing tabs are a mystery to > me. Otherwise everything else works OK. > Particulars: > "Server" - Win95b - 2 NICS - Internet Gate - Address 192.168.0.2 > "Client" - Warp 4 - FP11 - TCP/IP 4.1 - Address 192.168.0.1 > Address of Provider: > IP Address: 24.7.223.2 > Gateway: 24.7.223.1 > Primary DNS: 24.2.212.12 > Secondary DNS: 24.2.212.14 > DNS Name: cg950645-a > Any help would be appreciated. --------------68E0869D13FC8E1794A72D55 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit The better approach for you sittuation is use Network Address Tranlation (NAT). Since you have only one public IP address (24.7.223.2) you will need private ip addresses running on you LAN (192.168.0.1).
I use this software :

            &nbs p;     WinRoute 4.0
    NAT, Firewall, Proxy server, Mail server
       for Windows NT and Windows 95/98.
      Home Page: http://www.winroute.com/

You'll need to setup the server as a NAT server. On the OS/2 side you'll need to create/replace the default route (setup.cmd):

route add default 192.168.0.2 -hopcount 1

and change the resolv2 file like this:

domain <your_cable_provider>.com
nameserver  24.2.212.12
nameserver  24.2.212.14

regards,

JL

tvoltagg@home.com wrote:

Can anyone help me configure TCP/IP 4.1 for use as a "client" which
is connected in a Peer network to a Win95b "server" which has a cable
modem and Internet Gate on it?  I'm having particular difficulty getting the
"client" to access secure web sites in Netscape 4.61 Beta 2 and to Ftp.
In particular, the Socks Server, Hostname and Routing tabs are a mystery to
me.  Otherwise everything else works OK.
Particulars:
"Server" - Win95b - 2 NICS  - Internet Gate - Address 192.168.0.2
"Client" - Warp 4 - FP11 -  TCP/IP 4.1 - Address 192.168.0.1
Address of Provider:
IP Address: 24.7.223.2
Gateway:    24.7.223.1
Primary DNS: 24.2.212.12
Secondary DNS: 24.2.212.14
DNS Name: cg950645-a
Any help would be appreciated.
--------------68E0869D13FC8E1794A72D55-- --------------8384F0487E2906C70D0D8424 Content-Type: text/x-vcard; charset=us-ascii; name="jluiz.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for JoĆo Luiz Pereira Junior Content-Disposition: attachment; filename="jluiz.vcf" begin:vcard n:Pereira Junior;JoĆo Luiz tel;cell:+55 61 913-4222 tel;fax:+55 61 349-8451 tel;work:+55 61 274-6667 x-mozilla-html:FALSE url:www.neocomm.com.br org:NeoComm do Brasil adr:;;CLN 115 Bloco A sala 219;Brasilia;DF;70000-000;Brasil version:2.1 email;internet:jluiz@neocomm.com.br title:Diretor de Projetos fn:JoĆo Luiz Pereira Junior end:vcard --------------8384F0487E2906C70D0D8424-- --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42) +----------------------------------------------------------------------------+ From: domi@kenavo.NOSPAM.fi 24-Sep-99 03:47:26 To: All 24-Sep-99 04:26:04 Subj: Re: Good OS/2 Home Network Hardware From: domi@kenavo.NOSPAM.fi (Dominique Pivard) On Fri, 24 Sep 1999 02:13:14, sengsational@my-deja.com wrote: > > So what kind of 'networking' can I get from OS/2 to Windows? I figure > I'd always be able to FTP, but can I 'mount' the OS/2 drives on the > Windows system? My new hard drive is quite a bit bigger, so maybe I'll > just FTP the whole blasted thing! But to make it interesting, I have > an HPFS partition on the OS/2 box. You can install peer-to-peer services on the OS/2 box and share your resources between OS/2 and Windoze. Or you can use TCP/IP only (this is what I do). In order to 'mount' the OS/2 drives with TCP/IP, you need an NFS server on OS/2 and an NFS client on Windoze (neither of which is included in the base package). > Then we get into the hardware. I've got some old token ring cards in > the OS/2 and the dual boot machines. They'll come out to give me a > certain IRQ for the new ethernet board you will help me specify (ha!). > I don't need to spend lots of money on a smidge of extra speed, so the > '10' stuff looks fine. So what should I get? Can I get by with the > cards that you don't need a hub with, or should I just get the cards > and a hub? You said your work laptop has a network adapter in it. If it's a twisted-pair one, go for it with your other machines and buy yourself an inexpensive hub (they don't cost an arm and a leg nowdays). > I can't bear to unplug my OS/2 machine and put it in the attic! Help > me pick-out a networking scheme. I have a small home LAN with OS/2, Linux and Windoze boxes and it works fine. I'm using TCP/IP as the networking lingua franca. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: None!! (1:109/42) +----------------------------------------------------------------------------+ From: depaetz_no_spam_here@.mgl.ca 24-Sep-99 01:10:24 To: All 24-Sep-99 04:36:18 Subj: Warp 4 New Install - Upgrade path to latest MPTS/TCPIP Level? From: "David" Hello there, I am in the process of purchasing a new system, and will be installing OS/2 Warp 4. I am wondering what fixes are required to update the base system to the latest level for MPTS/TCPIP. This aspect of updating I find very confusing, and am not sure as to the best way to proceed. I do have the installation package for TCPIP v4.1 available to me. In the fresh install, should I skip the installation ot the network services, and then install TCPIP 4.1? I would really appreciate if someone could take the time to outline the best course of action, to update to the latest versions of MPTS/TCPIP. Replies by email appreciated. Regards, David Email: depaetz@mgl.ca --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: UUNET Canada News Transport (1:109/42) +----------------------------------------------------------------------------+ From: sma.spam-not@rtd.com 24-Sep-99 04:53:22 To: All 24-Sep-99 04:36:18 Subj: Re: Terminal Emulator From: James Moe Lawrence Progel wrote: > > I have to provide several os/2 systems with a connection to SCO Unix > running RealWorld accounting. It's character based, nothing fancy. I'd > like to use TCP/IP rather than the serial port. Does anyone know of a > good terminal emulation package (ansi or wyse60)? > A good tcpip solution is Telnet. Unless it's a dialup? -- sma at rtd dot com Remove ".spam-not" for email --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42) +----------------------------------------------------------------------------+ From: heloman@my-deja.com 24-Sep-99 04:55:08 To: All 24-Sep-99 04:36:18 Subj: Almost There From: heloman@my-deja.com I finally got RoadRunner installed today. Thanks to all that helped provide me information on the proper way to set it up as the TECH Support people that came out had NO idea what to do with OS/2. My question now is, after the machine has finished booting up it appears that I have to go to the DHCP Client Monitor utility, click on 'configuration - lan0' it then shows the lease is valid. At that time I can click on the java login script provided by larkin\nuclearwinter. Funny, the latest script shows it is trying to log on but when I start Netscape Communicator 4.61 it works just fine. SHOULDN'T the DHCP lease be automatic? DO I have to click on this screen every time? If not normal what do I need to do to make it work more smoothly? I await any and all responses. Thanks in advance for any help... Sent via Deja.com http://www.deja.com/ Before you buy. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Deja.com - Before you buy. (1:109/42) +----------------------------------------------------------------------------+ From: donnelly@tampabay.rr.com 24-Sep-99 12:59:16 To: All 24-Sep-99 10:53:13 Subj: Re: Almost There From: donnelly@tampabay.rr.com (Buddy Donnelly) On Fri, 24 Sep 1999 04:55:16, heloman@my-deja.com a Úcrit dans un message: > I finally got RoadRunner installed today. Thanks to all that > helped provide me information on the proper way to set it up as > the TECH Support people that came out had NO idea what to do > with OS/2. My question now is, after the machine has finished > booting up it appears that I have to go to the DHCP Client > Monitor utility, click on 'configuration - lan0' it then shows > the lease is valid. You shouldn't have to do that, unless DHCP isn't doing everything correctly. > At that time I can click on the java login > script provided by larkin\nuclearwinter. "Java" script? There was an RROS2 utility there that used EMX, but I've never seen a java version. Hm. Make an object of your logon ("RROS2.EXE"?) program with your username/password parameters and put it in your Startup folder, so you logon every time you reboot. > Funny, the latest > script shows it is trying to log on but when I start Netscape > Communicator 4.61 it works just fine. That's good. > SHOULDN'T the DHCP lease be automatic? Yes. If your MPTSTART is properly configured. > DO I have to click on this screen every time? The only time you have to re-logon is when you've logged off a session, or been off the network for more than an hour or two. (Or if the net or router goes down, which happens during storms.) > If not normal what do I need to do to make it work more smoothly? Basically, just work with it for a while. A lot of things seem to configure themselves, somehow. But I still keep a RROS2 shadow on my desktop in case I have to manually log back in. Good luck, Buddy Buddy Donnelly donnelly@tampabay.rr.com --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: RoadRunner - TampaBay (1:109/42) +----------------------------------------------------------------------------+ From: domi@kenavo.NOSPAM.fi 24-Sep-99 06:06:23 To: All 24-Sep-99 12:10:04 Subj: Re: Warp 4 New Install - Upgrade path to latest MPTS/TCPIP Level? From: domi@kenavo.NOSPAM.fi (Dominique Pivard) On Fri, 24 Sep 1999 05:10:48, "David" wrote: > > I am in the process of purchasing a new system, and will be installing OS/2 > Warp 4. I am wondering what fixes are required to update the base system > to the latest level for MPTS/TCPIP. A good starting point is: http://www.koeln.netsurf.de/~oliver.rick/english/tcpip.html > Replies by email appreciated. Not a good idea (please read http://www.frii.com/~rjn/internet/sendmail.txt) --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: None!! (1:109/42) +----------------------------------------------------------------------------+ From: sengsational@my-deja.com 24-Sep-99 20:42:01 To: All 24-Sep-99 20:01:11 Subj: Re: Good OS/2 Home Network Hardware From: sengsational@my-deja.com Thanks Domi. Let's get into the sharing thing, if you don't mind. Peer-to-peer services... Where does one get that, and how much does it cost? With my OS/2 to OS/2 network over token ring, I was using Sam Detweiler's small but highly functional sharing tool (the name of the tool escapes me at the moment). But as I recall, there was never (ever) going to be a 'Windoze' based client! Enter: peer to peer services? Do I remember correctly that this came with Warp 4? Can it be added to Warp 3? Although I have a copy of Warp 4, I didn't want to upgrade this box (actually, tried and failed several times... finally restored Warp 3). So, where does one get OS/2 peer to peer? And will it go on Warp 3? --Dale-- In article <3Bd8PsIG3uxi-pn2-osTEqKQC57L0@octek>, domi@kenavo.NOSPAM.fi (Dominique Pivard) wrote: > On Fri, 24 Sep 1999 02:13:14, sengsational@my-deja.com wrote: > > > > So what kind of 'networking' can I get from OS/2 to Windows? I figure > > I'd always be able to FTP, but can I 'mount' the OS/2 drives on the > > Windows system? My new hard drive is quite a bit bigger, so maybe I'll > > just FTP the whole blasted thing! But to make it interesting, I have > > an HPFS partition on the OS/2 box. > > You can install peer-to-peer services on the OS/2 box and share your > resources between OS/2 and Windoze. Or you can use TCP/IP only (this > is what I do). In order to 'mount' the OS/2 drives with TCP/IP, you > need an NFS server on OS/2 and an NFS client on Windoze (neither of > which is included in the base package). > snip Sent via Deja.com http://www.deja.com/ Before you buy. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Deja.com - Before you buy. (1:109/42) +----------------------------------------------------------------------------+ From: dcurren@ibm.net 24-Sep-99 21:35:05 To: All 24-Sep-99 20:01:11 Subj: Re: Warp 4 New Install - Upgrade path to latest MPTS/TCPIP Level? From: dcurren@ibm.net On Fri, 24 Sep 1999 01:10:48 -0400 (EDT), "David" wrote: >Hello there, > >I am in the process of purchasing a new system, and will be installing OS/2 >Warp 4. I am wondering what fixes are required to update the base system >to the latest level for MPTS/TCPIP. I really like the warpup CD from indelible blue. 20 bucks and it comes with the latest of everything and a great utility for installing. > --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ +============================================================================+