comp.os.os2.networking.misc (Usenet) Saturday, 18-Sep-1999 to Friday, 24-Sep-1999 +----------------------------------------------------------------------------+ From: nospam@nospam.noway.com 17-Sep-99 09:49:12 To: All 18-Sep-99 01:08:04 Subj: Re: DOS NETWORK APP OVER 0S2 SERVER From: "Roberto F. Salomon" On Fri, 17 Sep 1999 08:21:50 +0200, FRANCISCO LLORET wrote: >I've been having problems to install an DOS application over an OS2 Warp >server V.4 advanced. TheDOS application is compliant with NETBIOS >protocol but the install program constantly gives me an error like "not >network os system present", but the server is correctly operating with >other applications. Anyone knows if DOS applications need some special >procedure while installing.Regards from Argentina.Francisco Did you install the virtual DOS network support? --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: nospam (1:109/42) +----------------------------------------------------------------------------+ From: will@premier.net 17-Sep-99 12:27:09 To: All 18-Sep-99 01:08:05 Subj: Re: 3Com 905 NIC & Aurora From: "Will Luikart" On Thu, 16 Sep 1999 16:41:25 GMT, ralbers@dccnet.com wrote: :>I also run this card, first with Aurora Beta, and now with the GA. I :>found that I had to install the drivers that came with the NIC - Do :>not use the drivers that come with Aurora, so during installation of :>the os, chose the option of installing your own drivers. After that, :>it works fine. :> Unfortunately, the OS has been installed for several weeks now, so I don't have that option. I initially installed the "null" driver so I could set up TCPIP without a network card; I removed the null driver, rebooted, then installed the 3Com drivers from disk and setup TCPIP with it instead. Any ideas? Thanks in advance.... Will --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Giganews.Com - Premium News Outsourcing (1:109/42) +----------------------------------------------------------------------------+ From: will@premier.net 17-Sep-99 12:32:24 To: All 18-Sep-99 01:08:05 Subj: Re: 3Com 905 NIC & Aurora From: "Will Luikart" :>I had a similar problem with that card. It turned out it didn't like IRQ :>11 which it got from the BIOS. After I enable my (unused) USB in the :>BIOS, the :>3Com card got IRQ 9 and it worked fine ever since. You can check which :>IRQ is get by a PCI scanning utility, such as scanpci (hobbes), or most :>BIOSs will display it shortly before they boot the OS. :> :>Good luck, Mat Using the scanpci program, I determined that my 3Com card was using IRQ11 also, even though Aurora does not recognize it at startup. I tried something similar to your suggestion, at bootup I disabled my IDE interface in the BIOS (as my machine is all SCSI) and now the 3Com card shows up on scanpci using IRQ15 instead. But alas, Aurora still does not recognioze it. Any ideas? Thanks for your help.... Will --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Giganews.Com - Premium News Outsourcing (1:109/42) +----------------------------------------------------------------------------+ From: dhennin@ibm.net 17-Sep-99 12:55:28 To: All 18-Sep-99 01:08:05 Subj: Questions on the Xircom CEM56-100BTX From: Doug Henning Hope anyone can be of assistance. I am attempting to install the Xircom CEM56-100BTX (I believe this is the card I am trying to install, is says on the back of the card CEM56-100) PCMCIA Network/Modem Card in Warp4 on an IBM TP 380 ED. In using the xem100_1.exe driver package from the Xircom site I extract the files and appear to load it okay in MPTS. The card services appears to see the card okay, but identifies as a modem. When I restart, it identifies the Xircom card, but does not appear to initialize it. I get no link light, and the DHCP server that I am attempting to link to on a NT4 network will not initialize as well. (It times out after a long pause) TCP/IP services appears to be installed properly, but no IP connectivity via DHCP. What am I missing? Are there additional params in MPTS that I need? It works great as modem however. No problems there. I would greatly appreciate any assistance you can give. I am a lone OS/2 certified engineer on Warp4 swamped in a sea of M$ at my work. I want to get this thing working on my TP so that I can show my M$ associates how "kick-ass" OS/2 can really be! I got the info from the Notebook/2 site that this card works well. I have also posted this message to contact person for the above site as well. Reguards Doug Henning IBM Certified Systems Expert - OS/2 Warp 4 Computer Sciences Corporation Financial Services Group Americas Financial Services Network Systems and Support Austin, Texas --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: hakari@gci.net 18-Sep-99 11:05:17 To: All 19-Sep-99 06:48:22 Subj: Installing Peer From: Charles Hakari I have been using OS/2 since 1994, but I haven't had the need for networking until now. After I installed v4, I removed all unneed networking statements from my config.sys and have been happily accessing the internet with a modem. Now I would like to network the computers at home but can't get Peer to install. I get a sys3175 access violation, LAPSMOD.DLL, error D. Since this file isn't on my machine, I assume I am going to have to install something else first, but I don't know where to start. If I have to completely reinstall the networking, that is O.K. Again, I don't know where to start. Any suggestions would be appreciated. Chuck Hakari hakari@gci.net --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: madodel@ptdprolog.net 18-Sep-99 23:31:04 To: All 19-Sep-99 06:48:22 Subj: Re: Installing Peer From: madodel@ptdprolog.net (Mark Dodel) I've seen the Error D before, but in a different module. For a clearer idea of why it's failing look in C:\IBMINST\LOGS\LOCINSTU\LOCAL.L2 file. If you have ever updated the TCP/IP stack or MPTS then you can't use the basic peer install off the Warp 4 CD. you either have to uninstall MPTS(which use to be LAPS didn't it?) or use the CID peer install ( x:\CID\IMG\IBMPEER\PEERRMT.EXE install program on the Warp 4 CDROM. ) which asks if you want to install MPTS over the newer version (just say NO). The other thing to watch out for with peer is that all liens in your config.sys have to be less then 256 characters. Good Luck Mark On Sat, 18 Sep 1999 15:05:35, Charles Hakari wrote: -)I have been using OS/2 since 1994, but I haven't had the need for -)networking until now. After I installed v4, I removed all unneed -)networking statements from my config.sys and have been happily accessing -)the internet with a modem. Now I would like to network the computers at -)home but can't get Peer to install. I get a sys3175 access violation, -)LAPSMOD.DLL, error D. Since this file isn't on my machine, I assume I am -)going to have to install something else first, but I don't know where to -)start. If I have to completely reinstall the networking, that is O.K. -)Again, I don't know where to start. Any suggestions would be -)appreciated. -) -)Chuck Hakari -)hakari@gci.net -) //--------------------------------------------------------- // From the Desk of: Mark Dodel, RN, BSN, MBA // Healthcare Computer Consultant // madodel@ptdprolog.net // http://home.ptd.net/~madodel // // For a VOICE in the future of OS/2 // http://www.os2voice.org/index.html //---------------------------------------------------------  --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: PenTeleData http://www.ptd.net (1:109/42) +----------------------------------------------------------------------------+ From: NewsReader@NerdWorld.org 19-Sep-99 13:25:20 To: All 20-Sep-99 00:54:19 Subj: Java 1.18 Clobbers Netscape From: "Casey Bralla" I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. It cannot do a DNS lookup, complaining about no DNS entry. If I type in an IP address, it works just fine. Running nslookup from an OS/2 Window works fine too, so I know the DNS setup is still good. I've tried re-installing Netscape 4.04, but no avail. Anybody got any suggestions? Casey Bralla LinuxList@NerdWorld.org --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: The NerdWorld Organisation (1:109/42) +----------------------------------------------------------------------------+ From: sma.spam-not@rtd.com 19-Sep-99 21:44:09 To: All 20-Sep-99 00:54:19 Subj: Re: NT logon to OS/2 warp server -- SOLVED! From: James Moe James Moe wrote: > > Hello, > I'm trying this again. I placed a simialr post about a month ago and > got several usefule suggestions. While they furthered the endeavor, > there is no joy. > I installed winNT4 on one of our computers, one of a multi-boot set > (os/2 usually runs there). I got the Browser Enabler for the warp > server, the primary/client logon for NT. Individually the installations > went ok. I have verified that the Browser is loaded and, I presume, > running. The element that prevented a successful logon: WINS. I had (for some reason) enabled the WINS client and selected "Use DNS server for WINS". This apparently pre-disposes winNT to ignore DNS, or expects to get information from DNS server that does not exist. Whatever. When that stuff was turned off, NT logged on quite comfortably. Thanks to all for you advice and suggestions. -- sma at rtd dot com Remove ".spam-not" for email --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42) +----------------------------------------------------------------------------+ From: Exovede@ImpaleTheSpammers.Com@Vi... 20-Sep-99 00:37:09 To: All 20-Sep-99 14:52:05 Subj: Re: Java 1.18 Clobbers Netscape Message sender: Exovede@ImpaleTheSpammers.Com@Videotron.ca From: Exovede@ImpaleTheSpammers.Com@Videotron.ca (Michel A Goyette) Sun, 19 Sep 1999 20:25:40, "Casey Bralla" a ‚crit: > I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. > It cannot do a DNS lookup, complaining about no DNS entry. If I type in an > IP address, it works just fine. Running nslookup from an OS/2 Window works > fine too, so I know the DNS setup is still good. > > I've tried re-installing Netscape 4.04, but no avail. > > Anybody got any suggestions? How did you make this upgrade? What version did you have before? I upgraded mine yesterday from the last build (may 99 I think) and everything is working perfectly. Salut, Michel (sur OS/2 Warp 4.07) ICQ #13376913 http://pages.infinit.net/exovede --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: carsten@keltsch.de 20-Sep-99 15:00:04 To: All 20-Sep-99 14:52:05 Subj: DIVA ISDN and LAN-Distance? From: "C. Keltsch" Hello, is there a ndis-driver for LANDistance to get the DIVA ISDN PCI Card working? Carsten --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: IBM Global Services North -- Burlington, Vermont, (1:109/42) +----------------------------------------------------------------------------+ From: andre595@nospamgte.net 20-Sep-99 14:24:24 To: All 20-Sep-99 14:52:05 Subj: Re: Using NT in an os/2 network From: "Andre" I'm having trouble pinging my OS/2 machines on an NT network over a Frame Relay connection. Any ideas? -A Lavinia wrote in message ... >On Fri, 20 Aug 1999 03:36:57 GMT, James Moe wrote: > >>Richard Machuzak wrote: >>> >>> >>> Note - OS/2 passwords are case insensitive, but NT is case sensitive. Your >>> NT password must be all uppercase. >>> >> Tried that. No luck. Tried putting the account name in uppercase, >>too. >> >>-- >> >>sma at rtd dot com >>Remove ".spam-not" for email > >I don't have any trouble connecting to a NT server with a mixed case >password. However, I did have trouble with more than 8 characters. After I >reduced the pw to 8 characters, no problem with connecting, lower case, mixed >case, or upper case. > >L. > > > --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: sma.spam-not@rtd.com 21-Sep-99 03:21:21 To: All 21-Sep-99 03:35:03 Subj: Re: Using NT in an os/2 network From: James Moe Andre wrote: > > I'm having trouble pinging my OS/2 machines on an NT network over a Frame > Relay connection. Any ideas? > What kind of trouble? Erratic response? None at all? If none at all, check that your routing table has an entry to the frame releay connection. Also check the "Metric Count" setting. You might need to increase to something like 3 or 5. (Metric Count is the number of hops before giving up locating a host.) -- sma at rtd dot com Remove ".spam-not" for email --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42) +----------------------------------------------------------------------------+ From: gmilliken@sanstache.org 20-Sep-99 22:25:17 To: All 21-Sep-99 06:30:10 Subj: SYS0032 when attempting to rename a file on OS/2 drive from NT server 4 From: "George Milliken" I have an NT server that attaches to an OS/2 server through a share. Most file operations (copy, delete) work but when we try to rename a file we get a long pause (5 seconds) followed by a SYS0032 File in use by another process. We aren't sure if it's a parameter in IBMLAN.INI on OS/2 we need to edit, or perhaps an NT server setting. All suggestions are appreciated. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42) +----------------------------------------------------------------------------+ From: smclennan@ibm.net 21-Sep-99 12:20:19 To: All 21-Sep-99 17:28:12 Subj: Re: Java 1.18 Clobbers Netscape From: smclennan@ibm.net (Scott McLennan) Try loading netscape 4.61 beta. It is much more stable than 4.04 and works fine with java1.1.8. It is at http://www6.software.ibm.com/dl/net/net46-p In message - "Casey Bralla" Sun, 19 Sep 1999 13:25:40 -0700 (PDT) writes: :> :>I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. :>It cannot do a DNS lookup, complaining about no DNS entry. If I type in an :>IP address, it works just fine. Running nslookup from an OS/2 Window works :>fine too, so I know the DNS setup is still good. :> :>I've tried re-installing Netscape 4.04, but no avail. :> :>Anybody got any suggestions? :> :>Casey Bralla :>LinuxList@NerdWorld.org :> :> --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: doug.bissett"at"ibm.net 21-Sep-99 18:49:01 To: All 21-Sep-99 17:28:12 Subj: Re: Java 1.18 Clobbers Netscape From: doug.bissett"at"ibm.net (Doug Bissett) On Sun, 19 Sep 1999 20:25:40, "Casey Bralla" wrote: > I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. > It cannot do a DNS lookup, complaining about no DNS entry. If I type in an > IP address, it works just fine. Running nslookup from an OS/2 Window works > fine too, so I know the DNS setup is still good. > > I've tried re-installing Netscape 4.04, but no avail. > > Anybody got any suggestions? > > Casey Bralla > LinuxList@NerdWorld.org > > I run NS2.02, and Comm4.04, and I updated to JAVA 1.1.8, when it first came out. No problems. I just did the JAVA 1.1.8 update, with no problems. The DNS lookup sounds more like something in the dialer went AWOL. Which dialer are you using? Most are supposed to update the DNS address in the Netscape program, when the connection is made. Hope this helps... ****************************** From the PC of Doug Bissett doug.bissett at ibm.net The " at " must be changed to "@" ****************************** --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: cbrace@lim.nl 22-Sep-99 00:53:00 To: All 22-Sep-99 04:29:01 Subj: Reinstall LAN interface woes From: cbrace@lim.nl (Colin Brace) Hello all, Last week my harddisk crashed and I am in the process of rebuilding my system. but am having trouble getting the network component working again. On a brandnew HD, I installed FP6 on top of the base Warp 4. Updated MTPS to 08610 and TCPIP to 4.02t. Dialup via COM2: with In-Joy, the PPP dialer, works fine. The TCPIP stack seems to be correctly set up. But I can't seem to get a connection going now across my network card (RTL8029). The DOS diagnostic program says the card is fine. Booting, OS/2, the network card driver loads fine. But DHCP can't find the host. (I've activated the interface in the TPCIP notebook and added the name of my ISP's nameserver.) I have a cable network connetion which worked flawlessly for more than a year with more or less the same OS/2 configuration, but now I can't seem to get it working again. Anyone have any suggestions?... --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: UUNET-NL (http://www.nl.uu.net) (1:109/42) +----------------------------------------------------------------------------+ From: cbrace@lim.nl 22-Sep-99 00:57:09 To: All 22-Sep-99 04:29:01 Subj: Reinstalling LAN interface woes From: cbrace@lim.nl (Colin Brace) Hello all, Last week my harddisk crashed and I am in the process of rebuilding my system. but am having trouble getting the network component working again. On a brandnew HD, I installed FP6 on top of the base Warp 4. Updated MTPS to 08610 and TCPIP to 4.02t. Dialup via COM2: with In-Joy, the PPP dialer, works fine. The TCPIP stack seems to be correctly set up. But I can't seem to get a connection going now across my network card (RTL8029). The DOS diagnostic program says the card is fine. Booting, OS/2, the network card driver loads fine. But DHCP can't find the host. (I've activated the interface in the TPCIP notebook and added the name of my ISP's nameserver.) I have a cable network connetion which worked flawlessly for more than a year with more or less the same OS/2 configuration, but now I can't seem to get it working again. Anyone have any suggestions?... --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: UUNET-NL (http://www.nl.uu.net) (1:109/42) +----------------------------------------------------------------------------+ From: mcmorran@norfolk.infi.net 21-Sep-99 21:18:26 To: All 22-Sep-99 04:29:01 Subj: Re: Java 1.18 Clobbers Netscape From: mcmorran@norfolk.infi.net (Peter McMorran) In , on 09/21/99 at 06:49 PM, doug.bissett"at"ibm.net (Doug Bissett) said: >On Sun, 19 Sep 1999 20:25:40, "Casey Bralla" > wrote: >> I just upgraded my Java to the most recent 1.18. Now Netscape is clobbered. >> It cannot do a DNS lookup, complaining about no DNS entry. If I type in an >> IP address, it works just fine. Running nslookup from an OS/2 Window works >> fine too, so I know the DNS setup is still good. >> >> I've tried re-installing Netscape 4.04, but no avail. >> >> Anybody got any suggestions? >> >> Casey Bralla >> LinuxList@NerdWorld.org >> >> >I run NS2.02, and Comm4.04, and I updated to JAVA 1.1.8, when it >first came out. No problems. I just did the JAVA 1.1.8 update, >with no problems. >The DNS lookup sounds more like something in the dialer went >AWOL. Which dialer are you using? Most are supposed to update >the DNS address in the Netscape program, when the connection is >made. Yes. Assuming this is Warp 4, nslookup uses \mptn\etc\resolv2 (at least on my system), while other commands, including ping, use resolv in the same directory. Dialers (DOIP, InJoy) always update resolv, but may not update resolv2. Clients get the DNS address from one of these files. You might try a ping to separate the Java/browser issue from the DNS problem. For example, ping www.ibm.com. Cheers, Peter -- ----------------------------------------------------------- mcmorran@norfolk.infi.net (Peter McMorran) ----------------------------------------------------------- --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: InfiNet (1:109/42) +----------------------------------------------------------------------------+ From: mhammoc@ibm.net 21-Sep-99 23:01:05 To: All 22-Sep-99 04:29:01 Subj: Warp 4 on TP 390E (With W/98) From: Mike Hammock I just got a Thinkpad 390E and am trying to install Warp4 on it. I have w/98 on it (pre-installed) and have used PartitionMagic to lay out the disk (6.4MB) as: Bootmanager (6MB) C: Win/98 2000MB Physical Partition D: Warp 305MB Logical Partition E: Windows data (FAT32) 2000MB Logical Partition F: OS/2 Data rest of the disk Logical Partition I have the replacement install disks (1 & 2). When I boot the install disks and take the 'advanced install' option ( to put OS/2 on the D: partition), it brings up FDISK with a message that "DISK 1 partition info may be corrupted" (or something like that). FDISK only shows C partition then all others as one large partition... I can't find a way to force it to properly recognize the partitions (without deleting everything... which I can't do now...). Win/98 FDISK seems to understand the layout (except for F: which is HPFS formatted) Any suggestions?? Thanks, Mike --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: norrisg@linkline.com 21-Sep-99 22:34:28 To: All 22-Sep-99 04:29:02 Subj: Re: Java 1.18 Clobbers Netscape From: "Graham C. Norris" Do you think you've posted in enough newsgroups? Which one would like an answer in? The short answer is that installing Java can't cause this, so something else has happened. Try posting more details to just one newsgroup. Graham. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42) +----------------------------------------------------------------------------+ From: kris@dgraph.com 22-Sep-99 00:56:06 To: All 22-Sep-99 10:37:23 Subj: Re: FTP through a proxy server From: Kris Kadela try connecting as yourlogin@ftp.server.com tvoltagg@home.com wrote: > > I have not been able to use an FTP client through a proxy server. I like > ftppm from warp and I also have NcFTP. Neither work. My machine is Warp4 > and is connected to a Win95b machine in a peer network running Internet > Gate as a proxy server. I have the FTP proxy set in Internet gate but I > can't seem to configure either FTP client to act through the proxy server. > Can anyone help? --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: DigiGraph Technical (1:109/42) +----------------------------------------------------------------------------+ From: baltusler@hotmail.com 22-Sep-99 11:37:25 To: All 22-Sep-99 10:37:23 Subj: OS2 3.0 and 4.0 problems using Intephase 5515 PCI ATM adapter From: "Baltus le Roux" Can anybody help plse. We are currently in the process of upgrading our backbone to a 8265 Nways ATM switch. We are using the Interphase 5515 PCI ATM adapter. After installing the ATM driver software and reboot after setup the server hangs, as soon as it opens up the link to the switch, with a TRAP0008 error. Any suggestions will be appreciated as we are pressed for time. Regards Baltus le Roux Info Technologist Phone : +27 12 313 3134 South African Reserve Bank Fax : +27 12 313 3555 E-mail : baltus.leroux@resbank.co.za --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: An Internet Solution Customer (1:109/42) +----------------------------------------------------------------------------+ From: tvoltagg@home.com 22-Sep-99 11:07:13 To: All 23-Sep-99 04:15:24 Subj: Re: FTP through a proxy server From: tvoltagg@home.com I get a message: "no route to host" I'm at a loss as to what to connect to. Should it be the IP address of my proxy machine (192.168.0.2)? If so, how do I give it the ftp name of the ultimate destination I want to ftp to? In <37E87D8D.B0639446@dgraph.com>, Kris Kadela writes: >try connecting as yourlogin@ftp.server.com > >tvoltagg@home.com wrote: >> >> I have not been able to use an FTP client through a proxy server. I like >> ftppm from warp and I also have NcFTP. Neither work. My machine is Warp4 >> and is connected to a Win95b machine in a peer network running Internet >> Gate as a proxy server. I have the FTP proxy set in Internet gate but I >> can't seem to configure either FTP client to act through the proxy server. >> Can anyone help? --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Team OS/2 (1:109/42) +----------------------------------------------------------------------------+ From: Exovede@ImpaleTheSpammers.Com@Vi... 22-Sep-99 16:44:01 To: All 23-Sep-99 04:15:25 Subj: Re: FTP through a proxy server Message sender: Exovede@ImpaleTheSpammers.Com@Videotron.ca From: Exovede@ImpaleTheSpammers.Com@Videotron.ca (Michel A Goyette) Wed, 22 Sep 1999 02:06:03, tvoltagg@home.com a ‚crit: > I have not been able to use an FTP client through a proxy server. I like > ftppm from warp and I also have NcFTP. Neither work. My machine is Warp4 > and is connected to a Win95b machine in a peer network running Internet > Gate as a proxy server. I have the FTP proxy set in Internet gate but I > can't seem to configure either FTP client to act through the proxy server. > Can anyone help? You should do a ftp to the proxy machine. Then, when the "Internet Gate>" prompt appears, enter the address (username@site) that you want to access. HTH. Salut, Michel (sur OS/2 Warp 4.07) ICQ #13376913 http://pages.infinit.net/exovede --- WtrGate+ v0.93.p7 sn 165 * Origin: Origin Line 1 Goes Here (1:109/42) +----------------------------------------------------------------------------+ From: tvoltagg@home.com 22-Sep-99 23:40:16 To: All 23-Sep-99 06:08:14 Subj: Re: FTP through a proxy server From: tvoltagg@home.com That did it. Thanks for your help. In , Exovede@ImpaleTheSpammers.Com@Videotron.ca (Michel A Goyette) writes: >Wed, 22 Sep 1999 02:06:03, tvoltagg@home.com a écrit: > >> I have not been able to use an FTP client through a proxy server. I like >> ftppm from warp and I also have NcFTP. Neither work. My machine is Warp4 >> and is connected to a Win95b machine in a peer network running Internet >> Gate as a proxy server. I have the FTP proxy set in Internet gate but I >> can't seem to configure either FTP client to act through the proxy server. >> Can anyone help? > > You should do a ftp to the proxy machine. Then, when the "Internet >Gate>" prompt appears, enter the address (username@site) that you want >to access. HTH. > >Salut, > > Michel (sur OS/2 Warp 4.07) > ICQ #13376913 > http://pages.infinit.net/exovede --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Team OS/2 (1:109/42) +----------------------------------------------------------------------------+ From: oad@it.hkbank.com 23-Sep-99 18:35:26 To: All 23-Sep-99 20:16:00 Subj: Problem on WordPerfect 6.1 for Windows filename automatically rename From: "oad" Our company has encountered the following problem: We have workstations running on OS/2 platform. WordPerfect 6.1 for Windows installed at Novell Netware server. We do the word processing task use WordPerfect 6.1 for Windows in the OS/2 Warp platform. Periodically, the WordPerfect files created have been rename automatically to @XXXXXX.WPD with the first character is '@'. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: CABLE & WIRELESS HKT IMS (1:109/42) +----------------------------------------------------------------------------+ From: jag12@_nospam_le.ac.uk 23-Sep-99 12:52:28 To: All 23-Sep-99 20:16:00 Subj: Re: LPRMON weirdness From: Dr J A Gow Dr J A Gow wrote: Once again thanks for your help - the problem has now resolved itself. I unintentionally annihilated my desktop the other day, and, being unable to recover the backup, performed a clean install Everything now works. I guess something internally in TCP/IP must have broken. Thanks, John. > Falko Tesch wrote: > > > Hi John, > > > > Seems alright to me. Well, do you print straight to LPT1 from WinOS/2 > > or do you use LPT1.OS2? > > If you use LPT1 than you might have a problem with your OS/2 printer > > driver since WinOS/2 is printing straight to the mapped LPT1. > > Please check your TCP/IP settings, page Printing. Diasable/erase all > > printing setting and stop the LPRD from auto-starting. > > Check your TCPSTART.CMD for rem-ming LPRD and your CONFIG.SYS for any > > SET PRINT... statements. > > Now reboot and see if it works now. > > > > CU/2 > > Falko _________________ ______________________________________________________ | | | | | Dr. J.A. Gow M.Eng AMIEE | | \||/ | Research Associate, Power Electronics Research Group | | \/ | Leicester University | | __ 00 | University Road | | / \/ \_@ | Leicester, UK. | | | \ | | | \__/ \ \ | Tel: (0468) 328787 | | / \ /\ | | | | | \__/ | | email: jag12@le.ac.uk | | | / | | | \__ __ / | | | |||| | | | __||||__ | | | <___||___> | ______________________________ | |_________________|________|THIS IS A MICROSOFT-FREE ZONE!|______________| --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: University of Leicester, UK (1:109/42) +----------------------------------------------------------------------------+ From: engel003@mc.duke.edu 23-Sep-99 13:56:18 To: All 23-Sep-99 20:16:01 Subj: PC Anywhere type product? From: Blowhards Not long ago I read on one of the os2 newsgroups something about a new IBM product that (I gathered) worked like PC Anywhere, i.e. it allowed one to take control of a remote workstation. I think it was only available for Windows at the time, but that an OS/2 version was coming. What was that product? Thanks. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Duke University (1:109/42) +----------------------------------------------------------------------------+ From: oad@it.hkbank.com 24-Sep-99 10:15:15 To: All 24-Sep-99 04:26:04 Subj: Problem on WordPerfect file rename automatically From: "oad" Our workstations used OS/2 platform. Using WordPerfect 6.1 for Windows installed on Novell server. The WordPerfect file automatically rename to @xxxxxxx.wpd periodically. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: CABLE & WIRELESS HKT IMS (1:109/42) +----------------------------------------------------------------------------+ From: jknott@ibm.net 24-Sep-99 05:46:08 To: All 24-Sep-99 12:10:05 Subj: Re: PC Anywhere type product? From: jknott@ibm.net (James Knott) In article <37EA69D5.6BCE804C@mc.duke.edu>, Blowhards wrote: >Not long ago I read on one of the os2 newsgroups something about a new >IBM product that (I gathered) worked like PC Anywhere, i.e. it allowed >one to take control of a remote workstation. I think it was only >available for Windows at the time, but that an OS/2 version was coming. >What was that product? Netfinity has been able to do that for years. -- E-mail jknott@ca.ibm.com _________________________________________________________________________ The above opinions are my own and not those of ISM Corp., a subsidiary of IBM Canada Ltd. --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne (1:109/42) +----------------------------------------------------------------------------+ From: t_am@gmx.de 23-Sep-99 22:58:18 To: All 24-Sep-99 15:24:08 Subj: Re: Warp Server4 SMP: Neighborhood Enabler From: t_am@gmx.de (Timo Maier) Hi! >Die BROWSER-Dienste konnten nicht gestartet werden. (could not be started) >NET2186: Steuerungsfunktion fuer diese Dienste kann nicht ausgefuehrt >werden. The problem was the netapi32.dll which could not be copied by the installation script. I installed the updated dll manually, and now it works. TAM -- OS/2 Warp4, Ducati 750SS '92 http://www.privat.toplink.de/homepages/thunder Remove "_" for eMail reply --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Freiburg/Germany (1:109/42) +----------------------------------------------------------------------------+ From: t_am@gmx.de 23-Sep-99 23:02:14 To: All 24-Sep-99 15:24:08 Subj: Re: Reinstalling LAN interface woes From: t_am@gmx.de (Timo Maier) Hi Colin! >the network card driver loads fine. But DHCP can't find the host. (I've >activated the interface in the TPCIP notebook and added the name of my ISP's >nameserver.) I could be a routing problem. Pls post your \mptn\bin\setup.cmd TAM -- OS/2 Warp4, Ducati 750SS '92 http://www.privat.toplink.de/homepages/thunder Remove "_" for eMail reply --- WtrGate+ v0.93.p7 sn 165 * Origin: Usenet: Freiburg/Germany (1:109/42) +----------------------------------------------------------------------------+ +============================================================================+