═══ 1. Extended help for installation ═══

                                  Installation

This installation will install the program for later use on your hard disk. 

Follow these steps to install the program: 

   1. Read the notes for the program that will be installed. (the window above 
      the pushbuttons !). 

   2. Select a drive from the drive list with enough free space on it. 
      Consider the information about the required hard disk space and the 
      existing hard disk space, which is displayed on the right side. 

   3. Enter the directory, where the program should be installed. 

   4. Start the installation by pressing the "Install" pushbutton. During 
      installation you can see the progress of the installation and the 
      actions, that the install program performs. 
      If you do not want to install the program, please press the "Exit" 
      pushbutton. 

   5. After the files has been installed on your hard disk, the installation 
      program will create a new folder (with the program object) on the Desktop 
      and then exit, if the installation was successful. 

 Note:   If you want to deinstall the program, delete the folder (including the 
         program object), the files in the program directory and finally remove 
         the program directory. 



 This installation program was developed and designed by: 

                                   Bernd Wetzel
                                Raunauer Str. 20b
                                  86381 Krumbach
                                     Germany
                          Phone/Fax: +49 - 8282 - 81517
                              CompuServe: 100256,664
                       Internet: 100256.664@compuserve.com


═══ 2. Start installation ═══

Use this pushbutton to start the installation. If there were any missing or 
incorrect options, this pushbutton is disabled. 

During installation you can watch the progress and what files are copied or 
unpacked. 


═══ 3. Exit installation ═══

Use this pushbutton to exit the installation. No files will be installed. 


═══ 4. Program directory ═══

Enter the name of the directory, where you wish to install the program, in this 
entryfield. 

You must enter a relative path (e.g \TEST or \EXAMPLE). 

The name of the directory must start with \ which must be followed by at least 
on character (installation to a root directory is not valid). 

If the entered directory name is invalid, the pushbutton "Install" will be 
disabled. 

See also Installation. 

Note: 

If the directory does not exist, you will be asked whether to create that 
directory or not. 

On beginning the entryfield is filled with a default directory. 


═══ 5. Program information ═══

This window displays important information about the program, that will be 
installed. 


═══ 6. Drive ═══

Use this list to select the target drive for the installation. 

On the right side you will see the free space of the currently selected drive. 
If there is not enough space on the selected drive, the pushbutton "Install" 
will be disabled. 

Note: 

Diskette drives are not included in the list. 

The first harddisk is automatically pre-selected. 

See also Installation.